HP Omni 120-1124 Desktop PC Guide de démarrage rapide

Copyright and License

Development Company, L.P. The information

contained herein is subject to change without

notice.

The only warranties for Hewlett-Packard

products and services are set forth in the

express statements accompanying such

products and services. Nothing herein should

be construed as constituting an additional

warranty. HP shall not be liable for technical or

editorial errors or omissions contained herein.

HP assumes no responsibility for the use or

reliability of its software on equipment that is not

furnished by HP.

This document contains proprietary information

that is protected by copyright. No part of this

document may be photocopied, reproduced, or

translated to another language without the prior

written consent of HP.

Hewlett-Packard Company

P.O. Box 4010

Cupertino, CA 95015-4010

USA

This product incorporates copyright protection

technology that is protected by U.S. patents and

other intellectual property rights. Use of this

copyright protection technology must be

authorized by Macrovision, and is intended for

home and other limited viewing uses only

unless otherwise authorized by Macrovision.

Reverse engineering or disassembly is

prohibited.

Microsoft and Windows are trademarks of

Microsoft Corporation in the U.S. and other

countries.

HP supports lawful use of technology and does

not endorse or encourage the use of our

products for purposes other than those

permitted by copyright law.

The information in this document is subject to

change without notice.

Understanding hard disk drive space

The hard disk drive on the Hewlett-Packard and

Compaq computers with the Microsoft®

Windows® operating system preinstalled may

appear to be smaller than the size stated in the

product specifications, in the documentation, or

on the box. Hard disk drives are described and

advertised by manufacturers in terms of decimal

(base 10) capacity. Microsoft Windows and

other programs, such as FDISK, use the binary

(base 2) numbering system.

In decimal notation, one megabyte (MB) is

equal to 1,000,000 bytes, and one gigabyte

(GB) is equal to 1,000,000,000 bytes. In the

binary numbering system, one megabyte is

equal to 1,048,576 bytes, and one gigabyte is

equal to 1,073,741,824 bytes. Because of the

different measuring systems, you may see a

difference between the size reported by

Microsoft Windows and the size advertised. The

storage capacity of the hard disk drive is as

advertised.

Microsoft Windows reports smaller capacity in

the Windows Explorer tool and in the computer

window because it shows information about one

partition on the hard disk drive at a time. One of

the partitions contains the System Recovery

information.

Note about systems configured with 4 GB of

memory

For computers with a 32 bit operating system,

all memory above 3 GB may not be available

because of system resource requirements.

This limitation is not limited to HP and Compaq

systems. The memory above 3 GB is used for

system resources.

Confirming total memory

The system BIOS displays the full 4 GB of

installed memory.

1. Turn on the PC.

2. Press F10. The BIOS menu is displayed.

Confirm the Total Installed Memory.

Table of contents

1 Getting information ..................................................................................................... 1

Safety information ........................................................................................... 2

2 Setting up your computer .......................................................................................... 3

Protecting your computer ................................................................................ 4

Connecting to the Internet .............................................................................. 5

Transferring files and settings to your new computer ..................................... 6

3 Troubleshooting and maintenance ........................................................................... 6

Computer does not start ................................................................................. 7

Power .............................................................................................................. 8

Display (monitor) ............................................................................................. 8

Keyboard and mouse (with cable) ................................................................ 10

Keyboard and mouse (wireless) ................................................................... 11

Speakers and sound ..................................................................................... 12

Internet access ............................................................................................. 12

Software troubleshooting .............................................................................. 13

Maintenance ................................................................................................. 16

System recovery ........................................................................................... 18

4 Customer care ..........................................................................................................

Product information ....................................................................................... 23

Support information ...................................................................................... 24

Warranty print on demand statement ........................................................... 26

ENWW v

23.

vi ENWW

1 Getting information

Type of information Where to find

● Set up your computer. Setup poster included with your computer.

● See how-to videos about

using the features of your

computer.

Visit

http://www.hp.com/supportvideos (English only)

●

Use the computer.

● Connect to the Internet.

●

Recover factory settings.

Getting Started (this guide)

●

Learn how to use the

Microsoft Windows 7

operating system.

●

Find Windows 7 password

information.

● Troubleshoot the most

common computer hardware

and software issues.

● Find links to driver updates.

●

Read frequently asked

questions.

Help and Support

Click Start, and then click Help and Support or visit

http://www.hp.com/

go/win7.

Windows 7 troubleshooting tools

1. Click Start, click Control Panel, and then click System and

Security.

2. Under Action Center, click Find and fix problems

(troubleshooting).

●

Find electronic user guides

and specifications for your

computer model.

●

Order parts and find

additional troubleshooting

help.

HP Support website:

http://www.hp.com/support

●

Upgrade or replace

components of your

computer.

Upgrading and Servicing Guide

Click Start, click All Programs, and then click HP User Manuals.

If the guide is not available there, visit

http://www.hp.com/support

ENWW 1

Type of information Where to find

●

Find computer warranty

information.

● Get technical support.

Limited Warranty and Support Guide or the Warranty and Support

Information included with your computer.

Or

Click Start, click All Programs, and then click HP User Manuals.

●

Get up-to-date information

and help from the Windows

community.

http://www.hp.com/support/consumer-forum

● Connect to a TV. Watching and Recording TV

Click Start, click All Programs, and then click HP User Manuals.

If the guide is not available there, visit

http://www.hp.com/support

●

Get special utilities for

computer owners.

PC Help & Tools folder

Click Start, click All Programs, and then click PC Help & Tools.

●

Maintain your computer. HP Support Assistant — Maintains your computer performance and

resolve problems faster by using automated updates, on-board

diagnostics, and guided assistance.

Click Start, click All Programs, click HP, and then click HP Support

Assistant.

● Find safety and regulatory

notices.

Safety & Regulatory Information

Click Start, click All Programs, and then click HP User Manuals or visit

http://www.hp.com/ergo.

●

Find ergonomic information. Safety & Comfort Guide

Click Start, click All Programs, and then click HP User Manuals or visit

http://www.hp.com/ergo.

Safety information

For more information, refer to the Regulatory and Safety Information document in

the HP User Manuals folder. Click Start, All Programs, and then click HP User

Manuals.

2 Chapter 1 Getting information ENWW

WARNING! To reduce the risk of electrical shock or damage to your

equipment:

• Place the computer in a location away from water, dust, moisture, and soot.

These can increase the inside temperature, or can cause fire or electrocution.

• Do not disable the power cord grounding plug. The grounding plug is an

important safety feature.

• Plug the power cord in a grounded (earthed) outlet that is easily accessible at

all times.

• Disconnect power from the equipment by unplugging the power cord from the

electrical outlet. To prevent direct exposure to laser beam, do not try to open the

enclosure of the CD or DVD drives.

• The power supply is preset for the country/region in which you purchased your

computer. If you move, check the voltage requirements for your new location

before plugging the computer into an AC power outlet.

WARNING! The computer may be heavy; be sure to use ergonomically correct

lifting procedures when moving the computer.

To reduce the risk of serious injury read the Safety & Comfort Guide. The guide

is located on the web at

http://www.hp.com/ergo.

2 Setting up your computer

NOTE: Some features might not be available on systems that are shipped

without a version of Microsoft Windows.

1. Place the computer so that all ventilation openings are unobstructed and

cabling is not in a walkway or where it can be stepped on or damaged by

placing furniture on it.

2. Connect all power cords from the monitor, computer, and accessories to a

power surge protection device that is specifically labeled as having surge

protection, an uninterruptible power supply (UPS), or a similar device. If the

computer has a television tuner, or a modem or telephone connection,

protect the computer by using surge protection with these signal inputs as

well. Connect the television cable or the telephone line cord to the surge

protection device, and then connect the device to the computer.

3. Download and install operating system updates.

a. Find out what operating system and version your computer is currently

running.

(Click Start > Control Panel and double-click System. The operating

system and version are shown under Windows edition.)

b. Open your internet browser and go to

http://www.hp.com/support.

ENWW

Safety information

3

c. Select your country and language, if necessary, and click Support &

Drivers.

d. Select Download drivers and software (and firmware), type your

computer model name and number in the product field, and press

Enter.

e. If necessary, select your computer model from Product search

results.

f. Select your computer operating system.

g. Click Download next to each update you wish to download.

h. Follow the on-screen instructions to install each downloaded update.

4. Look in the computer box for additional printed details or updates.

5. Read the Safety and Regulatory Information document in the HP User

Manuals folder.

6. Read the Safety & Comfort Guide for proper workstation setup, posture,

health and work habits, and electrical and mechanical safety information.

Click Start, click All Programs, and then click HP User Manuals or visit

http://www.hp.com/ergo.

Protecting your computer

Computer risk Computer feature

Unauthorized use of the

computer or user account

User password

A password is a group of characters that you choose to secure computer

information.

Unauthorized access to

Setup Utility, BIOS settings,

and other system

identification information

Administrator password

Computer viruses Antivirus software

The free trial antivirus software that is preinstalled on your computer can detect

most viruses, remove them, and, in most cases, repair damage caused by

viruses. For protection against new viruses beyond the trial period, purchase an

extended update service.

4 Chapter 2 Setting up your computer ENWW

Computer risk Computer feature

Unauthorized access to data

and ongoing threats to the

computer

Firewall software

●

Windows 7 includes firewall software preinstalled on the computer.

● The antivirus software, which is preinstalled on the computer, includes

firewall software.

Windows 7 critical security updates

Microsoft continually updates the Windows 7 operating system.

After you complete the initial computer setup, you might want to install additional

software programs or hardware devices. Check the operating system, memory,

and other requirements listed before purchasing new software or hardware for

your computer. Follow the software manufacturer's directions to install the new

software.

NOTE: Use only licensed original software. Installing copied software could

result in an unstable installation, infect the computer with a virus, or be illegal.

Security solutions can deter theft, mishandling, and software attacks, but cannot

prevent them.

Connecting to the Internet

Steps to connect to the Internet:

1. Connect the hardware as shown on the setup poster.

2. Get Internet service.

●

Sign up with an Internet Service Provider (ISP). If you already have an

account with an ISP, skip this step and follow the instructions provided

by the ISP.

●

If you did not set up the computer for Internet service during the initial

setup, do so now by using Online Services:

a. Click Start, click All Programs, click Online Services, and then

click Get Online.

b. Follow the on-screen instructions to select an ISP and set up

Internet service.

NOTE: Online Services provides a list of ISPs; however, you

might choose another ISP or transfer an existing account to this

computer. To transfer existing accounts, follow the instructions

provided by the ISP.

3. Using your Internet connection through your ISP, open a web browser and

browse the Internet.

ENWW

Connecting to the Internet

5

NOTE: If you have issues connecting to the Internet, see Internet access

on page 12.

Transferring files and settings to your new computer

You can copy files from another computer to your new computer by using CDs or

DVDs, memory sticks, and external hard drives. You can also use Windows Easy

Transfer software, which is included with Windows 7 (select models only), to

copy files and settings to a storage device or, using an Easy Transfer Cable,

directly from another computer to the new computer. The Easy Transfer Cable is

a USB cable designed specifically to connect two computers and to work with the

Windows Easy Transfer software.

NOTE: The Easy Transfer Cable is sold separately. A standard USB cable

does not work.

To transfer your files and settings:

1. Click Start, type Windows Easy Transfer into the Start Search box,

and then click Windows Easy Transfer.

2. Follow the on-screen instructions in the Windows Easy Transfer wizard to

transfer your files to your new computer.

NOTE: Some features might not be available on systems that are shipped

without a version of Microsoft Windows.

3 Troubleshooting and maintenance

Refer to the documentation provided by the product manufacturer for information

about peripheral-specific problems, such as issues with a monitor or a printer.

The following tables present some issues you might encounter while installing,

starting up, or using your computer and possible solutions.

For more information or for additional troubleshooting options, see

Getting

information on page 1.

6 Chapter 3 Troubleshooting and maintenance ENWW

Computer does not start

Symptom Possible solution

Error message:

Hard disk drive

error.

Restart the computer.

1. Press the Ctrl+Alt+Delete keys on the keyboard simultaneously.

2. Click the Arrow button next to the red Shut Down button, and then click Restart.

Or, press and hold the Power button on the computer for 5 or more seconds to turn

off the computer, and then press the Power button to restart the computer.

3. If Windows opens, immediately back up all important data to a backup hard disk drive.

4. Contact Support, whether it was possible or not to start up Windows.

Either the hard disk drive or the system board may need to be replaced.

Computer will not

turn on or start.

Ensure that the cables connecting the computer to the external power source are plugged

in properly. When the cables connecting the computer to the external power source are

plugged in properly, and the wall outlet is functioning, the green power supply light on the

back of the computer should be on; if it is not, contact Support.

If the display (monitor) is blank, the monitor might not be properly connected. Connect the

monitor to the computer, plug it in, and turn it on. See

Display (monitor) on page 8.

Test the wall outlet by connecting a different electrical device to it.

Computer seems

to be locked up

and is not

responding.

Use the Windows Task Manager to close any programs not responding, or restart the

computer:

1. Press the Ctrl+Alt+Delete keys on the keyboard simultaneously.

2. Click Start Task Manager.

3. Select the program that is not responding, and then click End Task.

If closing programs does not work, restart the computer:

1. Press the Ctrl+Alt+Delete keys on the keyboard simultaneously.

2. Click the Arrow button next to the red Shut Down button, and then click Restart.

Or, press and hold the Power button on the computer for 5 or more seconds to turn

off the computer, and then press the Power button to restart the computer.

ENWW

Computer does not start

7

Power

Symptom Possible solution

Error message:

Invalid system

disk or Non-

System disk or

Disk error.

When drive activity stops, remove the disc and press the spacebar on the keyboard. The

computer should start up.

Computer does

not turn off when

the Power button

is pressed.

Press and hold the Power button until the computer turns off. Check Power Settings.

Computer shuts

down

automatically.

●

The computer might be in an exceedingly hot environment. Let it cool down.

●

Ensure that computer air vents are not blocked and that the internal fan is running —

see Keeping the computer free of dust, dirt, and heat under

Maintenance

on page 16. (Your computer might not have an internal fan.)

Display (monitor)

Symptom Possible solution

Screen is blank,

and monitor power

light is not lit.

Reconnect the power plug to the back of the monitor and to the wall outlet.

Press the Power button on the monitor.

Screen is blank. Press the space bar on the keyboard or move the mouse to make the screen display

visible again.

Press the Sleep button (select models only), or Esc on the keyboard, to resume from Sleep

mode.

Press the Power button to turn on the computer.

Inspect the monitor video connector for bent pins:

●

If any of the pins are bent, replace the monitor connector cable.

● If no pins are bent, reconnect the monitor connector cable to the computer.

8 Chapter 3 Troubleshooting and maintenance ENWW

Symptom Possible solution

Images on the

screen are too

large or too small,

or the images are

fuzzy.

Adjust the monitor resolution setting in Windows 7:

1. Click Start, and then click Control Panel.

2. Under Appearance and Personalization, click Adjust Screen Resolution.

3. Adjust resolution as necessary, and then click Apply.

NOTE:

In addition to the information listed here, also refer to the documentation that came with your monitor.

ENWW

Display (monitor)

9

Keyboard and mouse (with cable)

Symptom Possible solution

Keyboard

commands and

typing are not

recognized by the

computer.

Use the mouse to turn off the computer, unplug and reconnect the keyboard to the back of

your computer, and then restart your computer.

Mouse (with

cable) does not

work or is not

detected.

Unplug and reconnect the mouse cable to your computer.

If the mouse is still not detected, turn off the computer, unplug and reconnect the mouse

cable, and then restart the computer.

Cursor does not

move using the

arrow keys on the

number keypad.

Press Num Lock on the keyboard to turn off Num Lock, so that the arrow keys on the

number keypad can be used.

Cursor does not

respond to mouse

movement.

Use the keyboard to save changes in all open programs, and then restart your computer:

1. Press the Alt+Tab keys simultaneously to navigate to an open program.

2. Press Ctrl+S simultaneously to save your changes in the selected program (Ctrl+S is

the keyboard shortcut for Save on most—not all—programs).

3. Repeat step 1 and step 2 to save changes in all open programs.

4. After saving changes in all open programs, press the Ctrl+Esc keys on the keyboard

simultaneously to display the Windows Start menu.

5. Use the arrow keys to select the Arrow button that is next to Shut Down. Select Shut

Down, and then press Enter.

6. After the shutdown is complete, unplug and reconnect the mouse connector to the

back of your computer, and then restart your computer.

10 Chapter 3 Troubleshooting and maintenance ENWW

Keyboard and mouse (wireless)

Symptom Possible solution

Wireless

keyboard or

mouse does

not work or is

not detected.

● Ensure that you are using the wireless keyboard or wireless mouse within range of the

receiver, approximately 10 meters (32 feet) for normal use, and within 30 cm (12 inches)

during initial setup or for re-synchronization.

● Ensure that the mouse is not in Suspend mode, which occurs after 20 minutes of inactivity.

Click the left mouse button to reactivate it.

●

Replace the batteries in the keyboard and mouse.

● Re-synchronize the keyboard and mouse to the receiver using the following steps.

The receiver, wireless keyboard, and wireless mouse shown in the following illustrations are

examples; your models might vary. IMPORTANT: During these steps, place the wireless

keyboard and wireless mouse on the same level as the receiver, within 30 cm (12 inches) of the

receiver, and away from interference from other devices.

1. Unplug the receiver from a USB connector on the computer, and then reconnect it. Your

computer model might have a connector dedicated to the receiver. If you have a choice,

use a USB connector on the front of the computer.

2. Check that the mouse is on (A), and push and hold the Connect button (B) on the

underside of the mouse for 5 to 10 seconds until the LED on the receiver lights or stops

flashing. The receiver connection session times out after 60 seconds. To ensure that the

connection was established, and that the receiver did not time out instead, move the

mouse and check for response on the screen.

Off

On

Connect

A

B

3. After the mouse connection is established, continue by using the steps that follow to

repeat the procedure for the keyboard.

4. Push and hold the Connect button (C) on the underside of the keyboard for 5 to 10

seconds until the LED on the receiver lights or stops flashing.

Off

On

Connect

A

B

ENWW

Keyboard and mouse (wireless)

11

Speakers and sound

Symptom Possible solution

Volume is very

low or

unsatisfactory.

Ensure that you connected the speakers to the Audio Out (lime green) connector on the back

of the computer. (Additional audio connectors are used for multiple-channel speakers.)

Detached non-powered speakers (speakers without a separate power source, such as

batteries or a power cord) do not produce satisfactory sound. Replace the non-powered

speakers with powered speakers.

No sound is

produced.

For Windows 7:

1. Click Start, click Control Panel, click Action Center, and then click Troubleshooting.

2. Under Hardware and Sound, click Troubleshoot and audio playback.

If you use an High-Definition Multimedia Interface (HDMI) connector on the graphics card

(select models only) to connect your monitor to the computer, you should also connect

analog speakers to the computer Audio Line Out connector if you want to hear sound during

the initial setup of the computer. Refer to the Setup Poster to connect analog speakers.

If you are using built-in monitor speakers, use the monitor front-panel Volume button to

adjust volume. Use the front-panel buttons to enter the on-screen display (OSD) and ensure

that audio is enabled and that the volume is set appropriately.

Ensure that you connected powered (active) speakers and that they are turned on.

Turn off your computer, and then unplug and reconnect the speakers. Ensure that the

speakers are connected to an audio connector, not a Line In or headphone connector.

To resume from Sleep mode, press the Sleep button (select models only), or press Esc.

Unplug headphones if they are connected to your computer (or speaker system).

Internet access

Symptom Possible solution

Internet programs

do not start

automatically.

Log in to your ISP, and start the desired program.

12 Chapter 3 Troubleshooting and maintenance ENWW

Symptom Possible solution

I cannot connect

to the Internet.

For Windows 7:

1. Click Start, click Control Panel, click Action Center, and then click

Troubleshooting.

2. Under Network and Internet, click Connect to the Internet.

Verify that you are using the proper cables for your Internet connection type. Your

computer might have a dial-up modem and an Ethernet network adapter (also called a

network interface card, or NIC). A modem uses a standard telephone cable, whereas the

network adapter uses a network cable, to connect to a local area network (LAN). Do not

connect a telephone cable to the network adapter, and do not plug a network cable into a

telephone service line; doing so might damage the network adapter.

Run the wireless setup wizard:

1. Click Start, click Control Panel, click Network and Internet, and then click Network

and Sharing Center.

2. In the Network and Sharing Center window, click Set up a connection or network

to open the wizard, and then follow the on-screen instructions.

If your system has an external antenna, try to move the antenna to a better position. If the

antenna is internal, try to move the computer.

Try to connect again later, or contact your Internet service provider (ISP) for assistance.

Software troubleshooting

To repair software

problems, try

these methods:

●

Turn the computer off completely and then turn it on again. This is the easiest (and

sometimes the best) way.

● Update the drivers (see Updating device drivers, following).

●

Use Microsoft System Restore Software program and hardware driver reinstallation

(see Microsoft System Restore, later in this table). — Restores your computer to a

configuration that was in use before the software was installed.

●

Reinstall the software program or hardware driver (see Software program and

hardware driver reinstallation, later in this table). — Restores the software (if it came

with the product) or hardware driver to factory defaults.

●

System Recovery (see

System recovery on page 18) — Erase and reformat the

hard disk drive, and then reinstall the operating system, programs, and drivers. This

erases all data files you have created.

ENWW

Software troubleshooting

13

Updating device

drivers

Complete the following procedure to update a driver, or to revert to an earlier version of the

driver if the new one does not solve your problem:

1. Click Start.

2. Type Device Manager into the Start Search box, and then click Device Manager

to open the Device Manager window.

3. Click the plus sign (+) to expand the type of device you want to update or rollback.

(For example, DVD/CD-ROM drives).

4. Double-click the specific item (for example, HP DVD Writer 640b).

5. Click the Driver tab.

6. To update a driver, click Update Driver, and then follow the on-screen instructions.

Or, to revert to an earlier version of a driver, click Rollback Driver, and then follow

the on-screen instructions.

Microsoft System

Restore

If you have a problem that might be due to software that was installed on your computer,

use System Restore to return the computer to a previous restore point. You can also set

restore points manually.

NOTE:

Always use this System Restore procedure before you use the System Recovery

program.

Some features might not be available on systems that are shipped without a version of

Microsoft Windows.

To start a System Restore:

1. Close all open programs.

2. Click Start, right-click Computer, and then click Properties.

3. Click System protection, System Restore, click Next, and then follow the on-screen

instructions.

To add restore points manually:

1. Close all open programs.

2. Click Start, right-click Computer, click Properties, and then click System

protection.

3. Under Protection Settings, select the disk for which you want to create a restore

point.

4. Click Create, and then follow the on-screen instructions.

14 Chapter 3 Troubleshooting and maintenance ENWW

La page charge ...

HP Omni 120-1124 Desktop PC Guide de démarrage rapide

HP Omni 120-1124 Desktop PC Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents