Livlab 15224910 Mode d'emploi

Marque: Livlab

Modèle: 15224910

Taper: Mode d'emploi

Guide English

Français

One size ﬁts all

P.3

P.19

HoomBand Wireless

English

Manifesto

Setup

Usage

Questions

Product care

Warning

Warranty & conditions

Contact

P.4

P.5

P.10

P.12

P.14

P.16

P.17

To assist us on this journey we sur-

rounded ourselves with the best ex-

perts (hypnotherapists, sleep doctors,

sophrologists and sound designers)

with the aim of creating a quality au-

dio experience offering both variety

and immersive content to help you fall

asleep.

As current audio devices available

on the market are not well suited to

sleeping (large headphones, and un-

comfortable earbuds), we decided to

create HoomBand, the most comfort-

able textile headphone on the market.

HoomBand is more than just a pair of

headphones its your new nightly ritual.

Manifesto

We are Livlab,

a team of insomniacs, designers

and entrepreneurs, whose mission

is to improve your sleep.

Setup

Bluetooth® 5.0 (2402-2480MHz) and battery block

Flat and ajustable earphones

(frequency: 20Hz~20kHz / max power output: –1dBm)

Stretchable and breathable textile

(Adjustable size from 20” to 24”)

Anatomy

Battery charging

Open the hook at the

back of the headband.

It’s fully charged when the

green light disappears.

We recommend charging

after every use. Charging

typically takes up to 2h.

Plug the micro-USB cable

into the USB port on your

computer or any USB wall

adapter – a green light

will blink during charging.

Plug the micro-USB cable

(USB symbol facing you)

into the micro USB port

on the Bluetooth® module

(buttons facing you).

3 4

Sound signal

Waiting-for-signal sound is repeated until

HoomBand is connected to your device.

Hight battery

Low battery (20%)

Very low battery (5%)

Charging

Fully charged

LED

Control button

USB port

Light signal

OFF

Earphones position

Device

HoomBand

Device

Adjust the size of

the headband.

Adjust the position of the

earphones according to

your ears.

Device

HoomBand

Device

Pairing

You must be within 3 feet

(1 m) of your device. Find

the Bluetooth® module at

the back of the headband.

Hold down the button

for 1.5s until you hear

ascending tones through

the speakers followed by a

double bleeps and a blue

light for 5s.

On your device, make sure

Bluetooth® is turned on.

Look for “HoomBand” and

select to pair. Pairing may

take up to 15s.

Device

HoomBand

Device

Usage

Open the HoomBand app

downloaded from the App

Store or Google Play.

Turn on the headband by

holding down the button of

the Bluetooth® block.

HoomBand automatically

connects to your device if it

has been paired.

Find yourself a comfortable place, choose the story of your

choice and place your smartphone on your bedside table.

You can download the audio ﬁles and activate airplane

mode to stay disconnected.

Can I wear HoomBand all night?

Yes, the headband was designed speciﬁcally to be worn

all night long (comfortable, breathable, etc). You can

therefore sleep in whatever position you like.

How should I set the volume?

We do not recommend using the highest volume setting,

in order to avoid damaging your hearing. The perfect vol-

ume is loud enough to hear the audio content correctly,

without it being so loud as to wake you up once you are

asleep.

I’m wearing HoomBand but i can still hear

things around me, is this normal?

Yes, the earphones are not in-ear and do not fully block

your ears like other headphones, this ensures a prolonged

confort during the night. It also means that your ears are

not blocked in the case of an emergency or a ﬁre alarm.

Questions

Where should I focus my attention?

Part of your attention will automatically be focused on the

sounds and hypnotic inductions. It is best to adopt a pas-

sive attitude and to let yourself go. This exercise is easy to

do and requires almost no mental effort.

Should I try and stop thinking?

No, trying to stop your thoughts is counter-productive.

Furthermore, your thoughts are not the reason why you

can’t fall asleep, your reaction to them is. Because they

are bothering you, you want to stop them. Since this at-

tempt is doomed to fail, it will only leave you feeling more

frustrated…and less likely to fall asleep ! With the help of

our stories available on the HoomBand app, you will be

lest caught up in your thoughts that will no longer hold

you back from sleeping.

Not sure if fully charged?

While charging, if the green light is blinking, the module is

not fully charged. If there is NO light on at all while charg-

ing, the Bluetooth® module is fully charged.

(1) Before washing remove the earphones and the Bluetooth® block

from inside the headband. (2) Wash the textile by hand in warm

water. (3) Once the headband is completely dry, insert the earphones

and the Bluetooth® device into the headband.

Product care

Washing

Do not use HoomBand or any of the HoomBand app content whilst operating a

motorized vehicle or whilst in an enviroment where you are unable to hear outside

noises that may endanger your own life or the life of others. At full volume, prolonged

listening of audio content may cause damage to your hearing. Using Hoomband af-

fects your ability to hear sounds from your surrounding enviroment at any volume.

Please use with caution.

Warning

Products manufactured after the 1st of January 2006 are not considered

as household waste. Please take to a approved electronic equipement re-

cycling facility.

Disclaimer. Not for use for children under 3 years old. The length of the cable

presents a risk of strangluation. Small pieces may lead to choking.

Please lower the volume before using to prevent hearing issues. Do not use

at a high volume for prolonged periods.

Battery

Autonomy of 8 hours. Be sure to recharge your product every two

nights. No worries, without music, the product automatically goes

to sleep.

FCC Caution

Any changes or modiﬁcations not expressly approved by the party responsible for com-

pliance could void the user’s authority to operate the equipment. This device complies

with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

IMPORTANT NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a res-

idential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the in-

terference by one or more of the following measures: (1) Reorient or relocate the

receiving antenna. (2) Increase the separation between the equipment and receiver.

(3) Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected. (4) Consult the dealer or an experienced radio/TV tech-

nician for help.

FCC Radiation Exposure Statement

The device has been evaluated to meet general RF exposure equirement. The device

can be used in portable exposure condition without restriction.

ISEDC statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with

Innovation, Science, and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions: (1) this device may not cause

interference and (2) this device must accept any interference, including interference

that may cause undesired operation of the device.

ISEDC Radiation Exposure Statement

The device complies with RF exposure guidelines, users can obtain Canadian infor-

mation on RF exposure and compliance.This Class B digital apparatus complies with

Canadian ICES-003.

Warranty

The Customer beneﬁts from the warranty against hidden

defects during two years. Any return of the product under

the above warranty must be with the prior agreement of

Livlab. In the event that a manufacturing defect renders

the Product unusable, the Customer may contact the Liv-

lab After Sales Service at support@mydodow.com. Livlab

undertakes to return free of charge the Product in good

working order to the Customer, or a replacement thereof.

Should the product be out of stock or impossible to repair,

the Customer will be offered a replacement or a refund of

the initial Product. Any return of the product under the

above warranty must be with the prior agreement of Liv-

lab. The defective product must be returned in its original

packaging, with all its parts and together with its acces-

sories. Any product, which is incomplete, damaged and/or

the original packaging of which has deteriorated, will not

be taken back or exchanged under this warranty.

Conditions

The care and washing of the textile product is the respon-

sibility of the customer. In the case of shrinkage or loss of

certain properties of the textile from washing, the warran-

ty will not be valid.

Warranty & conditions

Contact

You have an idea, a suggestion,

or you just want to say hello?

Feel free to email us:

support@hoomsleep.com

Français

Manifeste

Réglages

Utilisation

Questions

Entretien

Avertissement

Conditions de garantie

Contact

P.20

P.21

P.26

P.28

P.30

P.31

P.32

P.33

Nous nous sommes entourés des meil-

leurs spécialistes – hypnothérapeutes,

psychothérapeutes, médecins du som-

meil, sophrologues, écrivains, design-

ers sonore et musiciens – dans le but

de créer un contenu audio qualitatif,

varié et immersif pour vous aider à

vous endormir.

Et comme les outils audio du marché

n’étaient pas conçus pour s’endormir

(casques audio volumineux et écou-

teurs peu agréables), nous avons décidé

de développer HoomBand Bluetooth®,

un bandeau sonore textile sans fil

adapté au sommeil.

HoomBand Bluetooth

est plus qu’un

casque audio, c’est le nouveau rituel

de vos nuits.

Manifeste

Nous sommes Livlab, une équipe

d’ex-insomniaques, de designers

et d’entrepreneurs dont la mission

est d’améliorer votre sommeil.

La page charge ...

Livlab 15224910 Mode d'emploi

Marque: Livlab

Modèle: 15224910

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Livlab 15224910 Operating instructions

Documents connexes

Livlab 15212240 Le manuel du propriétaire

Livlab 15224910 Mode d'emploi

Livlab 15224910 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents