Kenwood FDM791 MultiPro Classic Le manuel du propriétaire

Catégorie
Robots culinaires
Taper
Le manuel du propriétaire
instructions
istruzioni
instrucciones
Bedienungsanleitungen
gebruiksaanwijzing
TYPE FDM78
TYPE FDM79
Type FDM79
Type FDM78
English 3 - 14
Nederlands 15 - 28
Français 29 - 41
Deutsch 42 - 55
Italiano 56 - 69
Dansk 70 - 81
Svenska 82 - 93
Norsk 94 - 105
Suomi 106 - 117
1.5 L
max
6
5
4
2
1
9
8
bo
bn
bk
7
bm
bl
3
TYPE FDM79
1
2
4
6
3
5
cl
bp
cm
cp
cq
cr
cn
co
cs
ct
dk
dl
dm
bq
bs
bt
ck
br
A - standard attachments
B - optional attachments
dn
do
dp
dq
cm
+
cn
co
+
dl
cq dk
cp dm do
bk
9
bl
cq
7
8
bn
bm
bp
bo
bq
br
co
cp
dn
dq
dp
bt
bs
cn
cl
cm
ck
safety
Read these instructions carefully and retain for future reference.
Remove all packaging and any labels.
The blades and discs are very sharp, handle with care. Always hold by
the finger grip at the top, away from the cutting edge, both
when handling and cleaning.
Do not lift or carry the processor by the handle - or the handle may break
resulting in injury.
Always remove the knife blade before pouring contents from the bowl.
Keep hands and utensils out of the processor bowl and blender goblet
whilst connected to the power supply.
Switch off and unplug:-
before fitting or removing parts;
when not in use;
before cleaning.
Never use your fingers to push food down the feed tube. Always use the
pusher/s supplied.
Never fit the blade unit to the power unit without the blender
goblet or compact chopper/grinder fitted.
Before removing the lid from the bowl or blender or compact
chopper/grinder from the power unit:-
switch off;
wait until the attachment/blades have completely stopped;
be careful not to unscrew the blender goblet or compact
chopper/grinder from the blade assembly.
SCALD RISK: Hot ingredients should be allowed to cool to room
temperature before blending.
Do not use the lid to operate the processor, always use the on/off speed
control.
This appliance will be damaged and may cause injury if the
interlock mechanism is subjected to excessive force.
Always unplug your food processor when not in use.
Never use an unauthorised attachment.
Never leave the appliance unattended when it is operating.
Never use a damaged appliance. Get it checked or repaired: see ‘service
& customer care’.
Never let the power unit, cord or plug get wet.
Don’t let excess cord hang over the edge of a table or worktop or touch
hot surfaces.
Do not exceed the maximum capacities stated in the recommended
speed chart.
3
Children should be supervised to ensure that they do not play with the
appliance.
This appliance shall not be used by children. Keep the appliance and its
cord out of reach of children.
Appliances can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe
way and if they understand the hazards involved.
Only use the appliance for its intended domestic use. Kenwood will not
accept any liability if the appliance is subject to improper use, or failure to
comply with these instructions.
Misuse of your processor/blender can result in injury.
The maximum rating is based on the attachment that draws the greatest
load. Other attachments may draw less power.
Refer to the relevant section under “using the attachments” for additional
safety warnings for each individual attachment.
blender safety
SCALD RISK: Hot ingredients should be allowed to cool to room
temperature before blending.
Always take care when handling the blade assembly and avoid touching
the cutting edge of the blades when cleaning.
Only operate the blender with the lid in place.
Only use the goblet with the blade assembly supplied.
Never run the blender empty.
To ensure the long life of your blender, do not run it for longer than 60
seconds.
Smoothie recipes - never blend frozen ingredients that have formed a solid
mass during freezing, break it up before adding to the goblet.
Never blend more than the max level - 1.5 litres (53 fl oz).
4
5
IMPORTANT: HOT
BLENDING INSTRUCTIONS
To minimise the possibility of scalding when blending hot ingredients keep
hands and other exposed skin away from the lid to prevent possible burns.
The following precautions must be observed:
CAUTION: Blending very hot ingredients may result in hot
liquid and steam being forced suddenly past the lid or filler
cap
bp
.
We recommend that hot ingredients are allowed to cool
before blending.
NEVER exceed 1200mls/5 cups capacity if processing hot liquids, such
as soups (refer to the markings on the goblet).
ALWAYS commence blending at a low speed and gradually increase
the speed. NEVER blend hot liquids by using the Pulse setting.
Liquids which tend to foam such as milk, should be limited to a
maximum capacity of 1000mls/4 cups.
Take care when handling the blender as the goblet and its contents will
be very hot.
Take particular care when removing the lid. The lid is designed to be a
tight fit to prevent leakage. If necessary protect your hands with a cloth
or oven gloves when handling.
Ensure the goblet is securely attached to the base and when removing
from the appliance, guide the base and ensure it is removed together
with the goblet.
Ensure that the lid and filler cap are securely in place before every
blending operation.
Always ensure that the vents in the filler cap are clear before every
blending operation
cl
.
When fitting the lid to the goblet always ensure that the lid and goblet
rim are clean and dry to ensure a good seal and prevent spillage.
slicing/grating disc safety
Never remove the lid until the cutting disc has completely
stopped.
Handle the cutting discs with care - they are extremely
sharp.
Do not overfill the bowl – do not exceed the maximum
capacity level marked on the bowl.
mini bowl and knife safety
Never remove the lid until the knife blade has completely stopped.
The knife blade is very sharp - always handle with care.
compact chopper/grinder safety
Never fit the blade unit to your food processor without the jar fitted.
Never unscrew the jar while the compact chopper/grinder is fitted to your
appliance.
Do not touch the sharp blades – Keep the blade unit away from children.
Never remove the compact chopper/grinder until the blades have
completely stopped.
To ensure the long life of your compact chopper/grinder, do not run it
continuously for longer than 60 seconds. Switch off as soon as you have
got the right consistency.
The appliance will not work if the compact chopper/grinder is incorrectly
fitted.
Do not process turmeric root in the compact chopper/grinder as it is too
hard and may damage the blades.
juice extractor safety
Do not use the juice extractor if the filter is damaged.
Only use the pusher supplied. Never put your fingers in the feed tube.
Unplug before unblocking the feed tube.
Before removing the lid, switch off and wait for the filter to stop.
Never use a damaged attachment.
6
b
efore plugging in
Make sure your electricity supply is the same as the one
s
hown on the underside of your appliance.
W
ARNING: THIS APPLIANCE MUST BE EARTHED.
T
his appliance conforms to EC directive 2004/108/EC on
Electromagnetic Compatibility and EC regulation no.
1
935/2004 of 27/10/2004 on materials intended for contact
w
ith food.
before using for the first time
1 Remove the plastic blade covers from the knife blade. Take
c
are the blades are very sharp. These covers should
be discarded as they are to protect the blade during
manufacture and transit only.
2
Wash the parts see ‘care & cleaning’
key
processor
1
power unit
2
bowl with drive shaft
3
detachable drive shaft
4
lid
5
feed tube
6
pushers
7
safety interlocks
8
speed/pulse control
9
power on light
bk
cord storage (at back)
weighing function (TYPE FDM79)
bl
kg/lb button
bm
on/zero button
bn
display screen
bo
weighing tray
thermoresist blender
bp
filler cap
bq
lid
br
goblet
bs
sealing ring
bt
blade unit
ck
base
cl
filler cap vents
A - standard attachments
cm
knife blade
cn
dough tool
co
dual whisk
cp
max capacity disc
cq
4mm slicing disc
cr
2mm slicing disc
B - optional attachments
Not all the attachments listed below will be included with your
f
ood processor model. Attachments are dependent upon the
m
odel variant. For more information or to order additional
attachments refer to the “service and customer care” section.
cs
e
xtra fine grater disc (if supplied)
ct
fine Julienne disc (if supplied)
dk
French fry disc (if supplied)
dl
f
olding tool (if supplied)
dm
mini bowl and blade (if supplied)
dn
grinding mill (if supplied)
do
c
itrus juicer (if supplied)
dp
metal juicer extractor (if supplied)
dq
attachment storage box (if supplied)
to use your food processor
1 Fit the bowl to the power unit. Place the handle towards the
right hand side and turn forward
1
until it locks.
2 Fit an attachment over the bowl drive shaft.
Note: Detachable drive shaft
2
should be fitted
when using the discs, mini bowl, whisk, folding
tool and citrus juicer.
Always fit the bowl and attachment onto the processor
before adding ingredients.
3 Fit the lid ensuring the top of the drive shaft/tool locates into
the centre of the lid
3
.
The processor will not operate if the bowl or lid
are not fitted correctly into the interlock. Check
that the feed tube and bowl handle are situated
to the right hand side.
4 Plug in. The Power On light will come on. Select one of the
following options: -
Speed Control – manually select the required speed (refer to
the recommended speed chart).
Pulse – use the pulse (P) for short bursts. The pulse will
operate for as long as the control is held in position.
5 At the end of processing turn the speed control to the ‘OFF’
position (Align the speed control with the power on light
9
).
Always switch off and unplug before removing the
lid.
important
Your processor is not suitable for crushing or grinding coffee
beans, or converting granulated sugar to caster sugar.
7
weighing function (TYPE FDM79 only)
Y
our food processor is fitted with a built in weighing function
to allow ingredients to be weighed straight into the bowl or
b
lender goblet.
T
he Maximum weighing capacity is 3Kg. This is the total
weight of all the ingredients including the weight of the bowl
o
r goblet.
to use the weighing function
1 Always fit the bowl, detachable drive shaft and attachment
or blender goblet onto the power unit before adding
i
ngredients.
2 Plug in – the display screen will
remain blank.
3
Press the ON/ZERO button once
and the display screen will light
up.
4 Press the (kg/lb) button to select
either grams or ounces. The
display will default to kg/g when
first switched on.
The unit weighs in 1g increments
and teaspoon/tablespoon
measures are recommended for
weighing small quantities.
5 Check the display shows ‘0’, if not, zero by pressing the
ON/ZERO button. Then weigh the required ingredients
straight into the bowl or goblet. After the weight is displayed,
press the ON/ZERO button and the display will return to ‘0’.
Add the next ingredients and that weight will be displayed.
Repeat until all ingredients are weighed.
If the display is not zeroed and either the ingredients or the
bowl/attachment/lid are removed the display will show
[ - - - -] to represent a minus reading.
To zero press the ON/ZERO button once.
6 Add the lid and select a speed to operate the processor.
During operation the display screen will freeze [- - - -] until
the speed control returned to the ‘OFF’ position.
After processing the last weight will be displayed on the
screen when the speed control is returned to the ‘OFF’
position. Note: The weight of the lid will be included if the
display is not zeroed before switching on.
The weight of any additional ingredients added down the
feed tube whilst the processor is running will not be shown
on the display screen.
bo
weighing tray
A removable weighing tray is
supplied for weighing
ingredients without the bowl or
blender.
To use, place the tray on top of
the power unit. Then follow
steps 2 to 5 under ‘to use the
weighing function’.
To remove, just lift the tray off.
auto switch off
The display screen will turn off automatically if the same
weight reading is shown after 5 minutes.
The display screen can be turned off manually by pressing
and holding down the ON/ZERO button for a few seconds.
i
mportant
Do not overload by exceeding the maximum weighing
c
apacity of 3Kg. The display will show [0 – Ld] if the
weighing function is overloaded.
D
o not subject the power unit to excessive force as this may
damage the weighing sensor.
A
lways place the processor on a dry flat surface prior to
w
eighing.
Do not move the power unit during operation of the
w
eighing function.
to use your thermoresist blender
1
Fit the sealing ring
bs
i
nto the blade unit
bt
-
ensuring the
seal is located correctly in the grooved area.
Leaking will occur if the seal is damaged or
i
ncorrectly fitted.
2
Clip the blade unit
bt
i
nto the base
ck
.
3 Screw the blade assembly onto the goblet - ensuring the
blade assembly is fully tightened
4
. Refer to the graphics
on the underside of the blade unit as follows:
- unlocked position
- locked position
The blender will not work if incorrectly
assembled.
4 Put your ingredients into the goblet.
5 Fit the lid to the goblet and push down to secure
5
. Fit the
filler cap.
6 Place the blender onto the power unit, and turn clockwise
6
to lock.
The appliance will not operate if the blender is
incorrectly fitted to the interlock.
7 Select a speed (refer to the recommended speed chart) or
use the pulse control.
hints
When making mayonnaise, put all the ingredients, except
the oil, into the blender. Remove the filler cap. Then, with the
appliance running, add the oil slowly through the hole in the
lid.
Thick mixtures, e.g. pâtés and dips, may need scraping
down. If the mixture is difficult to process, add more liquid.
Ice crushing - operate the pulse in short bursts until crushed to
the desired consistency.
The processing of spices is not recommended as they may
damage the plastic parts.
The appliance will not work if the blender is incorrectly fitted.
To blend dry ingredients - cut into pieces, remove the filler
cap, then with the appliance running, drop the pieces down
one by one. Keep your hand over the opening. For best
results empty regularly.
Don’t use the blender as a storage container. Keep it empty
before and after use.
Never blend more than 1.5 litres (53 fl oz) - less for frothy
liquids like milkshakes.
8
recommended speed chart
tool/attachment function recommended processing maximum
s
peed time
c
apacities
K
nife blade All in one cake mixes 8 15-20 secs 1.5Kg/3lb 5oz
f
lour weight
P
astry - rubbing fat into flour 5 –8 10 secs 340g/12oz
flour weight
A
dding water to combine pastry ingredients 10-20 secs
C
hopping fish and lean meat Pulse –8 10-30 secs 600g/1lb 6oz
P
âtés and terrines max lean beef
Chopping vegetables Pulse 5-10 secs 500g/1lb 2oz
Chopping nuts 8 30-60 secs 200g/8oz
Pureeing soft fruit, cooked fruit and vegetables 8 10-30 secs 1Kg/2lb 4oz
Sauces, dressing and dips 8 2 mins max 800g/1lb 8oz
Knife blade with Cold soups Start at low 30-60 secs 1.5 litres/53 fl oz
m
ax capacity disc speed and
Milkshakes/batters increase to 15-30 secs 1 litres/2pts
maximum
Dual whisk Egg whites 8 60-90 secs 6 (200g)
Egg & sugar for fatless sponges 8 4-5 min 3 (150g)
Cream 8 30 secs 500 ml/1pt
Creaming fat and sugar 8 2 mins max 200g/8oz fat
200g/8oz sugar
Dough tool Yeasted mixes 8 60 secs 1Kg/ 2lb 4oz total wt
White Bread Flour 8 60 secs 600g/1lb 6oz flour wt
Wholemeal Bread Flour 8 60 secs 500g/1lb 2oz flour wt
Folding tool Whipping cream and fruit purees 1 –2 60 secs 300g/12oz cream,
300g/12oz puree
Egg whites into heavy mixtures 1 –2 60 secs 600g/1lb 6oz total wt
Macaroons 1 –2 60 secs 500g/1lb 2oz total wt
Extra fine grater Parmesan cheese, potatoes for German 8–
potato dumplings
Fine Julienne disc Potato straws and rosti 8–
Stir fries and vegetable garnishes
French fry disc Cuts potatoes for thin French Fries and 8–
ingredients for casseroles and dips
(eg cucumber, apple and pear.)
Thermoresist blender Cold liquids and drinks 8 15-30 secs 1.5 litres/53 fl oz
Stock based soups 8 30 secs 1.2 litres/42 fl oz
Soups using milk 8 30 secs 1 litres/2pt
We recommend that hot ingredients are allowed to cool before blending. However should you wish to process
hot ingredients please read the Hot Blending Safety instructions.
Mini bowl and knife Meat 8 20 secs + Pulse 200g/8oz Lean beef
Chopping herbs 8 30 secs 15g/
1
2oz
Chopping nuts 8 30 secs 50g/2oz
Mayonnaise 8 30 secs 2 Eggs
300g/12oz Oil
Purees 8 30 secs 200g/8oz
Citrus Juicer Smaller items i.e. limes and lemons 1 –2 1Kg/2lb 4oz
Larger fruits i.e. oranges and grapefruits
Metal juice extractor Juicing fruit and vegetables ie apples and 8–800g/1lb 14oz apples
carrots 600g/1lb 6oz carrots
Juicing soft fruits ie grapes and tomatoes 8–500g/1lb 2oz
Grinding mill Processing a range of spices 8 30-60 secs 50g/2oz
Grinding coffee beans 8 30 secs
Chopping nuts Pulse 10 secs 50g/2oz
Processing garlic cloves, fresh chillies and root Pulse 10 secs 30g/1oz
ginger
This is for guidance only and will vary depending on the exact recipe and ingredients being processed.
Do not fill above
the maximum capacity
marked on the bowl
9
using the attachments
R
efer to recommended speed chart for each attachment.
cm
knife blade
The knife blade is the most versatile of all the attachments.
T
he length of the processing time will determine the texture
achieved. For coarser textures use the pulse control.
Use the knife blade for cake and pastry making, chopping
r
aw and cooked meat, vegetables, nuts, pâté, dips,
pureeing soups and to also make crumbs from biscuits and
bread.
h
ints
C
ut food such as meat, bread, vegetables into cubes
approximately 2cm/3/4in before processing.
B
iscuits should be broken into pieces and added down the
feed tube whilst the appliance is running.
When making pastry use fat straight from the fridge cut into
2cm/3/4in.cubes.
Take care not to over-process.
cn
dough tool
Use for yeasted dough mixes.
Place the dry ingredients in the bowl and add the liquid
down the feed tube whilst the appliance is running. Process
until a smooth elastic ball of dough is formed this will take
approx. 60 secs.
Re-knead by hand only. Re-kneading in the bowl is not
recommended as it may cause the processor to become
unstable.
co
dual whisk
Use for light mixtures such as egg whites, cream,
evaporated milk and for whisking eggs and sugar for fatless
sponges.
using the whisk
1 Fit the bowl onto the power unit, add the detachable drive
shaft.
2 Push each beater
7
securely into the drive head.
3 Fit the whisk by carefully turning until it drops over the drive
shaft.
4 Add the ingredients.
5 Fit the lid - ensuring the end of the shaft locates into the
centre of the lid.
6 Switch on.
important
The whisk is not suitable for making all in one
cake mixes as these mixes are too heavy and will
damage it. Always use the knife blade.
hints
Best results are obtained when the eggs are at room
temperature.
Ensure the bowl and whisks are clean and free from grease
before whisking.
c
reaming fat and sugar
For best results fat should be allowed to soften at room
temperature (20°C) before creaming. DO NOT use fat
s
traight from the fridge as this will damage the
whisk.
Heavier ingredients such as flour and dried fruit should be
f
olded in by hand.
Do not exceed the maximum capacity or processing time
stated in the recommended speed chart.
cp
max capacity disc
W
hen blending liquids in the bowl, the max capacity disc
must be used with the knife blade. It prevents leaking and
i
mproves the chopping performance of the blade.
1
Fit the bowl onto the power unit.
2 Fit the knife blade.
3 Add ingredients to be processed.
4 Fit the capacity disc over the top of the blade ensuring it sits
on the ledge inside the bowl
bk
. Do not push down on
the capacity disc.
5 Fit the lid and switch on.
slicing/grating discs
reversible slicing/grating discs - 4mm
cq
, 2mm
cr
Use the grating side for cheese, carrots, potatoes and foods
of a similar texture.
Use the slicing side for cheese, carrots, potatoes, cabbage,
cucumber, courgette, beetroot and onions.
extra fine grater disc
cs
Grates Parmesan cheese and potatoes for German potato
dumplings.
fine julienne
ct
Use to cut potatoes into straws and coarse grate for rosti,
stir fries and vegetable garnishes.
French fry disc
dk
Cuts potatoes for thin French Fries and ingredients for
casseroles and dips (eg cucumber, apple and pear.)
safety
Never remove the lid until the cutting disc has
completely stopped.
Handle the cutting discs with care - they are
extremely sharp.
Do not overfill the bowl – do not exceed the
maximum capacity level marked on the bowl.
to use the cutting discs
1 Fit the bowl onto the power unit, add the detachable drive
shaft.
2 Holding by the centre grip, place the disc onto the drive shaft
with the appropriate side uppermost
bl
.
3 Fit the lid.
4 Put the food in the feed tube.
Choose which size feed tube you want to use. The pusher
contains a smaller feed tube for processing individual items
or thin ingredients.
To use the small feed tube - first put the large pusher inside
the feed tube.
To use the large feed tube - use both pushers together.
10
5
Switch on and push down evenly with the pusher - never
put your fingers in the feed tube.
hints
Use fresh ingredients
D
on’t cut food too small. Fill the width of the feed tube fairly
full. This prevents the food from slipping sideways during
processing. Alternatively use the small feed tube.
W
hen using the Julienne or French fry disc, place ingredients
horizontally.
When slicing or grating: food placed upright
bm
comes out
s
horter than food placed horizontally
bn
.
There will always be a small amount of waste on the disc or
in the bowl after processing.
dl
folding tool
U
se the folding tool to fold light ingredients into heavier
mixtures for example meringues, mousses and fruit fools.
1 Fit the bowl onto the power unit, add the detachable drive
shaft.
2 Push the paddle
8
securely into the drive head.
3 Fit the folding tool by carefully turning until it drops over the
drive shaft.
4 Add the ingredients.
5 Fit the lid – ensuring the end of the shaft locates into the
centre of the lid .
6 Select low speed (speed 1 -2).
to remove the beater
Detach the beater from the drive head by pressing the
release button
9
.
hints
Do not use high speed as a low speed is required to
optimise the folding performance.
For best results do not over whisk egg whites or cream –
the folding tool will not be able to fold the mixture correctly if
the whisked mix is too firm.
Do not fold the mixture for longer than stated in the
recommended speed chart as the air will be knocked out
and the mix will be too loose.
Any unmixed ingredients left on the paddle or sides of the
bowl should be carefully folded in using the spatula.
dm
mini bowl and knife
Use the mini processor bowl to chop herbs and process
small quantities of ingredients e.g. meat, onion, nuts,
mayonnaise, vegetables, purées, sauces and baby food.
mini blade
mini bowl
to use the mini bowl and knife
1 Fit the bowl onto the power unit, add the detachable drive
shaft.
2 Fit the mini bowl over the detachable drive shaft - ensure the
cut out sections align with the locating tabs
bo
on the main
bowl.
Note: The main bowl lid cannot be fitted if the mini bowl is
not located correctly.
3 Place the knife blade over the drive shaft
bp
.
4 Add the ingredients to be processed.
5 Fit the lid and switch on.
s
afety
Never remove the lid until the knife blade has completely
stopped.
T
he knife blade is very sharp - always handle with care.
i
mportant
Do not process spices – they may damage the plastic.
Do not process hard food such as coffee beans, ice cubes
o
r chocolate – they may damage the blade.
h
ints
Herbs are best chopped when clean and dry.
A
lways add a little liquid when blending cooked ingredients
t
o make baby food.
Cut foods such as meat, bread, vegetables into cubes
a
pproximately 1-2 cm (
1
2
3
4 i
n) before processing.
W
hen making mayonnaise add the oil down the feed tube.
dn
grinding mill (If supplied)
Use the grinding mill for processing dry ingredients such as
nuts or coffee beans and for grinding spices such as:-
Black peppercorns, cardamom seeds, cumin seeds,
coriander seeds, fennel seeds, fresh ginger root, garlic
cloves and fresh chillies.
mill jar
grinding mill blade assembly
to use your grinding mill
1 Place your ingredients into the blade assembly .
2 Fit the jar and turn clockwise to lock
bq
.
3 Place the mill onto the power unit and turn clockwise to
lock
br
.
4 Select a speed or use the pulse (P).
safety
Never fit the blade unit to your food processor without the
jar fitted.
Never unscrew the jar while the mill is fitted to your
appliance.
Do not touch the sharp blades – Keep the blade unit away
from children.
Never remove the mill until the blades have completely
stopped.
To ensure the long life of your mill, do not run it continuously
for longer than 60 seconds. Switch off as soon as you have
got the right consistency.
The appliance will not work if the mill is incorrectly fitted.
Do not process turmeric root in the mill as it is too hard and
may damage the blades.
hints
For optimum performance when processing spices we
recommend that you do not process more than 50g at a
time in the mill.
Whole spices retain their flavour for a much longer time than
ground spices so it is best to grind a small quantity fresh at
a time to retain the flavour.
To release the maximum flavour and essential oils whole
spices are best roasted prior to milling.
Cut ginger up into small pieces before processing.
For best results the mini bowl attachment is recommended
when chopping herbs.
11
do
citrus juicer
Use the citrus juicer to squeeze the juice from citrus fruits
(
eg oranges, lemons, limes and grapefruits).
cone
sieve
to use the citrus juicer
1
Fit the bowl onto the power unit, add the detachable drive
s
haft.
2 Fit the sieve into the bowl - ensuring the sieve handle is
l
ocked into position directly over the bowl handle
bs
.
3
Place the cone over the drive shaft turning until it drops all
the way down
bt
.
4
Cut the fruit in half. Then switch on and press the fruit onto
t
he cone.
The citrus juicer will not operate if the sieve is
not locked correctly.
For best results store and juice the fruit at room temperature
and hand roll on a worktop before juicing.
To help with juice extraction move the fruit from side to side
when juicing.
When juicing large quantities, empty the strainer regularly to
prevent the build up of pulp and seeds.
dp
metal juice extractor
Use the centrifugal juicer for making juice from firm fruit and
vegetables.
safety
Do not use the juice extractor if the filter is
damaged.
Only use the pusher supplied. Never put your fingers in the
feed tube. Unplug before unblocking the feed tube.
Before removing the lid, switch off and wait for the filter to
stop.
Never use a damaged attachment.
pusher
lid
pulp remover
filter drum
to use the juice extractor
1 Fit the bowl to the power unit
ck
.
2 Place the pulp remover into the filter drum - ensuring the
tabs locate with the slots in the bottom of the drum
cl
.
3 Fit the filter drum
cm
.
4 Place the attachment lid onto the bowl, turn until it locks and
the feed tube sits over the handle
cn
. Your juice
extractor will not operate if the bowl or lid are
not fitted correctly into the interlock.
5 Cut the food to fit the feed tube.
6 Switch on and push down evenly with the pusher - never
put your fingers in the feed tube. Process fully before
adding more.
After adding the last piece, let the juice extractor run for a
further 30 seconds to extract all the juice from the filter
drum.
i
mportant
If the juice extractor starts to vibrate, switch off and empty
the pulp from the drum. (The juice extractor vibrates if the
p
ulp becomes unevenly distributed).
Maximum capacity that can be processed at one time is
800g of fruit or vegetables (refer to speed chart).
S
ome very hard foods may make your juice extractor slow
down or stop. If this happens switch off and unblock the
filter.
S
witch off and clear the pulp collector regularly during use.
h
ints
Before processing remove stones and pips (eg pepper,
melon, plum) and tough skins (eg melon, pineapple). You
d
on’t need to peel or core apples and pears.
Use firm, fresh fruit and vegetables.
To maximise juice extraction place small quantities at a time
i
n the feed tube and push down slowly.
Citrus fruit - peel and remove the white pith, otherwise the
juice may taste bitter. For best results use the citrus juicer.
dq
attachment storage box
Your food processor is supplied with a storage box for your
discs.
1 Fit the discs into the storage box when not in use
co
.
2 The storage box is fitted with a safety lock - close the lid to
lock. To open lift up the lid
cp
.
care & cleaning
Always switch off and unplug before cleaning.
Handle the blades and cutting discs with care -
they are extremely sharp.
Some foods may discolour the plastic. This is perfectly
normal and won’t harm the plastic or affect the flavour of
your food. Rub with a cloth dipped in vegetable oil to
remove the discolouration.
power unit
Wipe with a damp cloth, then dry. Ensure that the interlock
area is clear of food debris.
Don’t immerse the power unit in water.
Store excess cord in the storage area at the back of the
power unit
cq
.
blender
1 Empty the goblet, unscrew the blade unit by turning to the
unlock position to release. Then remove the blade unit by
pushing up from underneath.
Care should be taken when removing the blade unit from the
base.
2 Wash the goblet by hand.
3 Remove and wash the seal.
4 Don’t touch the sharp blades – brush them clean using hot
soapy water, then rinse thoroughly under the tap. Don’t
immerse the blade unit in water.
5 Leave to dry upside down.
dual whisk
Detach the beaters from the drive head by gently pulling
them free. Wash in warm soapy water.
Wipe the drive head with a damp cloth, then dry. Do not
immerse the drive head in water.
12
g
rinding mill
Remove the blade assembly from the jar by turning in an
anti-clockwise direction.
W
ash the jar by hand.
Don’t touch the sharp blades – brush them clean using hot
soapy water, then rinse thoroughly under the tap. Don’t
i
mmerse the blade unit in water.
Leave to dry upside down.
folding tool
Detach the beater from the drive head by pressing the
r
elease button
9
.
Wash in warm soapy water.
Wipe the drive head with a damp cloth, then dry. Do not
immerse the drive head in water.
f
ilter drum
T
he cutting blades on the base of the filter drum are very
sharp, take care when handling and cleaning the drum.
all other parts
Wash by hand, then dry.
Alternatively they are dishwasher safe and can be washed
on the top rack of your dishwasher. Avoid placing items on
the bottom rack directly over the heating element. A short
low temperature (Maximum 50°C) programme is
recommended.
service & customer care
If the cord is damaged it must, for safety reasons, be
replaced by KENWOOD or an authorised KENWOOD
repairer.
If you experience any problems with the
operation of the processor, before calling for
assistance refer to the troubleshooting guide.
If you need help with:
using your appliance or
servicing or repairs
Contact the shop where you purchased your appliance.
Designed and engineered by Kenwood in the UK.
Made in China.
I
MPORTANT INFORMATION FOR CORRECT
DISPOSAL OF THE PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE 2002/96/EC.
A
t the end of its working life, the product must not be disposed
of as urban waste.
It must be taken to a special local authority differentiated waste
c
ollection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible
n
egative consequences for the environment and health deriving
from inappropriate disposal and enables the constituent
materials to be recovered to obtain significant savings in energy
and resources. As a reminder of the need to dispose of
household appliances separately, the product is marked with a
crossed-out wheeled dustbin.
13
item suitable for
dishwashing
main bowl, mini bowl, lid, pusher
knife blades, dough tool
detachable drive shaft
discs
max capacity disc
whisk beaters/folding tool paddle
Do not immerse the drive head in water
blender goblet, lid, filler cap
blade unit and seal for blender
metal juice extractor
grinding mill blade assembly
grinding mill jar
spatula
14
troubleshooting guide
P
roblem Cause Solution
The processor will not operate. No Power. Check processor is plugged in.
N
o power/indicator light not lit.
B
owl not fitted to power unit correctly. Check bowl is located correctly
and the handle is situated
t
owards the right hand side.
B
owl lid not locked on correctly. Check that the lid interlock is
located correctly into the
handle area.
T
he processor will not
w
ork if the bowl and lid
a
re fitted incorrectly.
Compact chopper/grinder will not operate. Compact chopper/grinder not locked on correctly. The compact chopper/grinder will
n
ot operate if fitted incorrectly to
the interlock.
Compact chopper/grinder not assembled correctly. Check blade unit is fully tightened
onto the compact chopper/grinder
jar.
Blender will not operate. Blender not locked on correctly. The blender will not operate if
fitted incorrectly to the
interlock.
Blender not assembled correctly. Check blade unit is fully
tightened into the goblet.
Processor stops or slows Overload protection operated. Switch off, unplug and allow
during processing. Processor overloaded or overheated during the appliance to cool down for
operation. approximately 15 minutes.
Maximum capacity exceeded. Refer to the speed chart for
maximum capacities to
process.
Weighing function
Display screen freezes on [- - - -]. Quantity weighed too small. Use teaspoon and tablespoon
measures for very small
quantities.
Weight changed on display screen. Power unit moved during operation. Do not move unit during use.
Zero the display before
weighing next ingredients.
Blender leaking from blade assembly base. Seal missing. Check seal is fitted correctly
Seal incorrectly fitted. and not damaged. To obtain a
Seal damaged. replacement seal see “service &
customer care”.
Blender seal missing from blade unit when The seal is packed pre-fitted to the blade unit. Unscrew goblet and check that
removed from packaging. seal is fitted to blade unit.
To obtain a replacement seal
see “service & customer care”.
Poor performance of tools/attachments. Refer to hints in relevant “using the attachment” section. Check attachments are
assembled correctly.
veiligheid
Lees deze instructies zorgvuldig door en bewaar ze voor toekomstig
gebruik.
Verwijder alle verpakking en labels.
De messen en de schijven zijn erg scherp; ga er dus voorzichtig mee om.
Houd ze bij het hanteren en schoonmaken altijd bovenaan bij
de vingergreep en weg van het snijvlak, vast.
Til de keukenmachine niet bij het handvat op en draag hem evenmin op
die manier; hierdoor kan het handvat afbreken, waardoor u letsel kunt
oplopen.
Voordat u de inhoud uit de kom giet, dient u altijd eerst het mes te
verwijderen.
Houd uw handen en keukengereedschap uit de kom van de
keukenmachine en de beker van de blender, wanneer deze op het lichtnet
is aangesloten.
Schakel het apparaat uit en haal de stekker uit het stopcontact:-
voordat u onderdelen aanbrengt of verwijdert;
als u het apparaat niet gebruikt;
voor het reinigen.
Gebruik nooit uw vingers om voedsel in de invoerkoker te duwen. Gebruik
altijd de bijgeleverde stamper.
Zet het mes nooit op het motorblok zonder dat de beker van
de blender of het compacte hak/molenhulpstuk is bevestigd.
Voordat u het deksel van de kom haalt of de blender of het compacte
hak/molenhulpstuk van het motorblok verwijdert:-
zet het apparaat uit;
wacht totdat de hulpstukken / messen helemaal tot stilstand zijn
gekomen;
zorg dat u de blenderbeker of het compacte hak/molenhulpstuk niet
losschroeft van de messeneenheid.
VERBRANDINGSGEVAAR: Laat hete ingrediënten eerst tot
kamertemperatuur afkoelen voordat u ze in de blender verwerkt.
Gebruik nooit het deksel om de keukenmachine te bedienen, maar altijd de
aan/uit-knop.
Als teveel kracht wordt uitgeoefend op het
vergrendelingsmechanisme, wordt dit apparaat beschadigd
en kan het letsel veroorzaken.
Haal de stekker altijd uit de keukenmachine wanneer u hem
niet gebruikt.
Gebruik nooit een niet bij het apparaat behorend hulpstuk.
Laat het apparaat nooit onbeheerd terwijl het aan staat.
15
Nederlands
V
ouw voor het lezen a.u.b. de voorpagina met illustraties uit
Gebruik nooit een beschadigd apparaat. Laat het nakijken of repareren: zie
Onderhoud en klantenservice.
Laat het motorhuis, het netsnoer of de stekker nooit nat worden.
Laat het snoer nooit over de rand van een tafel of werkblad hangen of in
aanraking komen met hete oppervlakken.
U mag de maximum capaciteit die in de snelheidstabel wordt aangegeven,
niet overschrijden.
Op kinderen moet toezicht gehouden worden om er zeker van te zijn dat
ze niet met het apparaat spelen.
Dit apparaat mag niet door kinderen worden gebruikt. Houd het apparaat
en het snoer buiten het bereik van kinderen.
Dit apparaat kan worden gebruikt door personen met verminderde
lichamelijke, sensorische of geestelijke capaciteiten of gebrek aan ervaring
en kennis mits ze onder toezicht staan of instructie hebben gekregen over
het veilig gebruik van het apparaat en de betrokken risico's begrijpen.
Gebruik het apparaat alleen voor het huishoudelijke gebruik waarvoor het
is bedoeld. Kenwood kan niet aansprakelijk worden gesteld in het geval
dat het apparaat niet correct is gebruikt, of waar deze instructies niet
worden opgevolgd.
Misbruik van uw keukenmachine/blender kan tot letsel leiden.
Het maximum vermogen is afhankelijk van het hulpstuk dat de grootste
hoeveelheid energie verbruikt. Andere hulpstukken verbruiken misschien
minder energie.
Raadpleeg de betreffende paragraaf onder De hulpstukken gebruiken voor
aanvullende veiligheidswaarschuwingen voor ieder hulpstuk afzonderlijk.
veiligheid m.b.t. de blender
VERBRANDINGSGEVAAR: Laat hete ingrediënten eerst tot
kamertemperatuur afkoelen voordat u ze in de blender verwerkt.
Wees voorzichtig wanneer u de messen hanteert en raak het snijvlak van
de messen bij het reinigen niet aan.
Laat de blender uitsluitend voorzien van deksel lopen.
Gebruik de kan uitsluitend met de bijgeleverde messen.
De blender nooit leeg gebruiken.
Om een lange levensduur van uw blender te garanderen, mag u hem nooit
langer dan 60 seconden gebruiken.
Smoothie-recepten – verwerk nooit bevroren ingrediënten die tijdens de
bevriezing tot een vaste massa gevormd zijn; breek de massa op voor u
hem aan de kan toevoegt.
Meng nooit meer dan het maximum niveau - 1,5 liter.
16
17
BELANGRIJK: INSTRUCTIES VOOR HET
MENGEN VAN HETE VLOEISTOFFEN
Om de kans op brandwonden te verkleinen bij het mengen van hete
ingrediënten, moet u uw handen en andere onbeschermde huid uit de
buurt van het deksel houden om eventuele brandwonden te voorkomen.
De volgende voorzorgsmaatregelen moeten worden getroffen:
VOORZICHTIG: Het mengen van zeer hete ingrediënten kan
tot gevolg hebben dat hete vloeistof en stoom plotseling uit
het deksel of de vuldop worden gedreven
bp
.
We raden u aan hete ingrediënten te laten afkoelen voordat
ze worden verwerkt.
Overschrijd bij de verwerking van hete vloeistoffen, zoals soepen,
NOOIT de capaciteit van 1200 ml (gebruik de maatstreepjes op de
beker).
Stel de blender in het begin ALTIJD op een lage snelheid in en verhoog
de snelheid geleidelijk. Meng hete vloeistoffen NOOIT door de
pulseerstand te gebruiken.
Vloeistoffen die de neiging hebben om te schuimen, zoals melk, mogen
de maximumcapaciteit van 1000 ml niet overschrijden.
Wees voorzichtig als u de blender vastpakt: de beker en de inhoud zijn
erg heet.
Wees vooral voorzichtig als u het deksel verwijdert. Om lekken te
voorkomen is het deksel zo ontworpen dat het precies past. Bescherm
bij de hantering zo nodig uw handen met een doek of ovenwanten.
Zorg dat de beker goed op het onderstel is bevestigd; wanneer u de
beker van het apparaat verwijdert, houdt u het onderstel vast en zorgt
dat hij samen met de beker wordt verwijderd.
Zorg dat het deksel en de vuldop altijd goed op hun plaats zitten
voordat u de blender inschakelt.
Zorg altijd dat de luchtopeningen in de vuldop vrij zijn voordat u de
blender inschakelt
cl
.
Zorg er bij het plaatsen van het deksel altijd voor dat het deksel en de
rand van de beker schoon en droog zijn, zodat een goede afsluiting kan
worden verkregen en morsen kan worden voorkomen.
veiligheid m.b.t. de snij/raspschijf
Verwijder het deksel nooit voordat de schijf helemaal tot
stilstand is gekomen.
Wees voorzichtig met de snijschijven ze zijn heel erg
scherp
Vul de kom niet te ver - overschrijdt de maximum capaciteit
die op de kom wordt aangegeven niet.
veiligheid m.b.t. de minikom en het mes
Haal het deksel er nooit af voordat het meslemmet helemaal tot stilstand is
gekomen.
Het meslemmet is zeer scherp – ga er altijd voorzichtig mee om.
veiligheid m.b.t. het compacte hak/molenhulpstuk
Breng nooit de messeneenheid op het apparaat aan zonder dat de beker
is aangebracht.
Schroef de beker nooit los terwijl het compacte hak/molenhulpstuk op uw
keukenmachine bevestigd is.
Raak de scherpe messen niet aan. Houd de messeneenheid uit de buurt
van kinderen.
Verwijder het compacte hak/molenhulpstuk pas als de messen volledig tot
stilstand zijn gekomen.
Om een lange levensduur van uw compacte hak/molenhulpstuk te
garanderen, mag u hem nooit langer dan 60 seconden achtereen
gebruiken. Schakel het apparaat uit zodra u de juiste consistentie hebt
verkregen.
Het apparaat werkt niet als het compacte hak/molenhulpstuk onjuist is
bevestigd.
Verwerk geen geelwortel (kurkuma) in het compacte hak/molenhulpstuk;
dit is te hard en kan de messen beschadigen.
veiligheid m.b.t. de sapcentrifuge
De sapcentrifuge niet gebruiken als het filter beschadigd is.
Gebruik alleen de meegeleverde stamper. Steek uw vingers nooit in de
toevoerbuis. Haal de stekker uit het stopcontact voordat u de vulopening
deblokkeert.
Voordat u het deksel verwijdert, schakelt u de machine uit en wacht u
totdat het filter is gestopt.
Gebruik nooit een beschadigd hulpstuk.
18
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121

Kenwood FDM791 MultiPro Classic Le manuel du propriétaire

Catégorie
Robots culinaires
Taper
Le manuel du propriétaire