Aiwa XP-MP3 Operating Instructions Manual

XP-MP3

COMPACT DISC PLAYER

REPRODUCTOR DE DISCOS

COMPACTOS

OPERATING INSTRUCTIONS

BEDIENUNGSANLEITUNG

MODE D’EMPLOI

INSTRUCCIONES DE MANEJO

ISTRUZIONI PER L’USO

GEBRUIKSAANWIJZING

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

ENGLISH

DEUTSCH

FRANÇAIS

ESPAÑOL

ITALIANO

NEDERLANDS

2

ENGLISH

CAUTION

Use of controls or adjustments or

performance of procedures other than those

specified herein may result in hazardous

radiation exposure.

This compact disc player is classified as a

CLASS 1 LASER product. The CLASS 1

LASER PRODUCT label is located on the

exterior.

CAUTION!

Invisible laser radiation when

open and interlocks defeated.

Avoid exposure to beam.

• An MP3 file stores audio data

compressed using MPEG1/2, the audio

layer-3 file-coding scheme.

• In this manual, CDs, CD-R discs and

CD-RW discs are all referred to as

“discs”. We refer to what are called

“folder” and “file” in PC terminology as

“album” and “track”.

TABLE OF CONTENTS

PRECAUTIONS ...........................................3

USING ON DRY CELL BATTERIES............ 4

USING ON RECHARGEABLE

BATTERIES .............................................5

BEFORE PLAYBACK ................................. 6

PLAYBACK OF AUDIO DISC ..................... 9

PROGRAM PLAY...................................... 12

PLAYBACK OF MP3 DISC ....................... 14

CONNECTING AN EXTERNAL UNIT ....... 22

MAINTENANCE ......................................... 22

TERMINOLOGY ........................................23

SPECIFICATIONS .....................................25

ENGLISH

3

ENGLISH

To maintain good performance

• Do not use the unit in places which are

extremely hot, cold, dusty or humid. In

particular, do not use or keep the unit in

following places.

• in a high humidity area such as a bathroom

• near a heater

• in an area exposed to direct sunlight

(e.g., inside a parked car, where it can

become extremely hot)

• near sources of strong magnetism, such

as televisions, speakers, or magnets

• where there is a lot of movement or

vibration, such as on a car dashboard or

an unstable shelf

For safety

• Do not attempt to disassemble the unit.

Laser rays from the optical pickup are

dangerous to the eyes.

• Make sure that pins or other foreign object

do not get inside the player.

• Take care not to drop the unit or subject it

to strong shocks.

• To keep dust from the pickup lens, keep

the disc compartment lid closed after use.

Never touch the lens.

• If you hear no sound when playing a disc,

DO NOT turn the volume up high because

music could suddenly start at high volume.

Turn the volume control to the lowest level

before starting playback and slowly turn it

up to the desired level.

Note on listening with the

headphones

• Listen at moderate volumes to avoid hearing

damage.

• Do not wear the headphones while driving

or cycling.It may create a traffic hazard.

• You should use extreme caution or

temporarily discontinue use in potentially

hazardous situations, such as walking,

jogging, etc.

• Wear them properly; L is left, R is right.

• The in-ear type headphones should be

worn with the longer cord behind your

neck.

CAUTION

Listening to headphone stereo at full power

for extended periods of time can result in

hearing damage.

Note on condensation

If the unit is suddenly moved from a cold

place to a warm one, it may result in

condensation on the pickup lens and

malfunction or playback difficulties.

Should this occur, leave the unit for a few

hours, then try to playback again.

PRECAUTIONS

4

ENGLISH

USING ON DRY CELL BATTERIES

Open the battery compartment and

insert two

LR6 (size AA) alkaline

batteries with the 0 and 9 marks

correctly aligned.

LR6 × 2

Battery replacement

The battery indicator in the display changes

from to to according to the

remaining power of the batteries. Replace

the batteries when lights.

Battery life (using alkaline batteries

LR6)

Audio disc playback

E•A•S•S PLUS Approx. 10 hours

function on

E•A•S•S PLUS Approx. 11 hours

function off

MP3 disc playback Approx. 5 hours

Battery life may vary depending on conditions

of use.

To remove the batteries

If the cover of the battery

compartment comes off

Note on dry cell batteries

• Make sure that the 0 and 9 marks are

correctly aligned.

• Do not mix the different types of batteries,

or an old battery with a new one.

• To prevent the risk of electrolyte leakage or

explosions, never recharge the batteries,

apply heat to them, or take them apart.

• When not using the batteries, remove them

to prevent needless battery wear.

• If liquid leaks from the batteries, wipe

thoroughly to remove.

ENGLISH

5

ENGLISH

USING ON RECHARGEABLE BATTERIES

• Be sure to use size AA Ni-MH 1.2V

1600mAh rechargeable batteries, which

are commercially available.

• Be sure to read the instructions of the

purchased rechargeable batteries before

use.

• When using on the rechargeable batteries

for the first time, charge them until the

battery indicators go out.

• Before charging the batteries, close the

disc compartment. You cannot charge the

batteries while it is opened.

1 Insert the rechargeable batteries

with the 0 and 9 marks correctly

aligned.

2 Connect the AC adaptor.

1 to DC 5 V jack

2 to wall outlet

DC 5V

3

Keep

s

STOP/OFF/CHARGE pressed

for about 2 seconds to start charging.

“Charge ON” appears, and battery

indicator blinks.

When charging is completed, “Charge

OFF” flashes a few times, and the battery

indicator goes out.

Recharging fully used batteries takes

about 3 hours.

After charging, disconnect the AC

adaptor.

Time to recharge the batteries

Recharge the batteries when lights.

To stop charging

Press s STOP/OFF/CHARGE during

charging.

USING ON AC HOUSE CURRENT

Connect the supplied AC adaptor in the

same way as recharging the batteries.

6

ENGLISH

BEFORE PLAYBACK

HOLD switch

RESUME

HOLD

OFF

Release the HOLD switch before playback.

b a

When not using the unit, set the HOLD

switch to the HOLD position. b b

Accidentally pressed button will not function.

If buttons are pressed when the HOLD switch

is set to HOLD position, “HOLD” flashes in

the display.

Turning on and off

Turning the power on

Press ePLAY/PAUSE. Power is turned

on and playback starts.

Note

“ERROR” appears on the display when you

play a disc placed upside-down or a defective

disc.

ENGLISH

7

ENGLISH

Adjusting the sound

Volume

VOLUME

6

Turn the VOLUME control to adjust the

volume.

DSL

Press DSL repeatedly for more powerful

sound and deeper bass.

: Deep bass is emphasized.

: Deep bass is strongly emphasized.

: Normal sound

Turning off the power

If no new operations are done within 30

seconds from the end of last operation, the

power is turned off automatically. (Auto power

off function)

• You can turn off the power by pressing

s STOP/OFF/CHARGE before it is

automatically turned off.

Standby mode

When an operation finishes, the unit goes

into standby mode until the auto power off

function automatically turns off the power.

To enter standby mode, press ePLAY/

PAUSE to start playback, then press

sSTOP/OFF/CHARGE.

8

ENGLISH

Inserting a disc

1 Slide the OPEN switch to open the

disc compartment.

OPEN

2 Place a disc in the center with the

label side facing up.

3 Close the disc compartment.

BEFORE PLAYBACK

To remove the disc

Pick up the disc, holding its edge, while

pressing the pivot gently.

Note

• The unit may not play a CD-R/RW disc that

is recorded on personal computers or some

kinds of CD-R/RW recorders because of

differences in recording platforms.

• Do not attach any seal or label to either

side (the recordable side or the labeled

side) of a CD-R/RW disc. It may cause

malfunction.

ENGLISH

9

ENGLISH

4 Press ePLAY/PAUSE.

Playback starts from the first track.

a track number

b elapsed playing time

Basic operation

2

1

4

5

3

STOP/OFF/

CHARGE

1 Connect the supplied headphones

to the \/LINE OUT jack.

/LINE OUT

2 Release HOLD.

3 Place a disc.

PLAYBACK OF AUDIO DISC

Press sSTOP/OFF/

CHARGE.

Press ePLAY/PAUSE.

To resume, press again.

Press r or t.

Keep r or t

pressed.

Release the button at the

start of desired passage.

To stop

To pause

To search for the

beginning of a track

To locate a desired

passage

10

ENGLISH

E•A•S•S PLUS (Electronic Anti-

Shock System)

The E•A•S•S PLUS function reduces skipping

or muting of the sound when the unit is

subjected to shocks.

To activate the E•A•S•S plus function, press

E•A•S•S repeatedly to display .

To cancel, press E•A•S•S again.

display changes to .

Note

• Continuous shock or vibration may cause

the sound to be interrupted even if the

E•A•S•S PLUS function is activated. This

is normal and not a malfunction. Should

you experience an interruption in sound,

stabilize the unit for a few seconds, then

resume your activity.

• When the E•A•S•S button is pressed during

playback, the unit will pause for about 2

seconds.

Display during playback

PRGM / ENTER /

DISPLAY

Press PRGM/ENTER/DISPLAY during

playback to change the display as follows.

b Track display and remaining playing

time of the track in play

V

Remaining number of tracks and

remaining playing time

V

Track display and elapsed playing time

(normal display)

PLAYBACK OF AUDIO DISC

E•A•S•S

ENGLISH

11

ENGLISH

Random play

2

1

1 Press PLAY MODE in standby mode

to display

.

2 Press ePLAY/PAUSE to start

playback.

Tracks on the disc are played in random

order.

To cancel random play, press PLAY MODE

in standby mode. display changes to

.

Note

• You cannot back to previous track by

pressing r during random play.

• You cannot select one-track repeat during

random play.

Resume function

Set the HOLD switch to RESUME.

RESUME

HOLD

OFF

appears, and you can start playback

from the point where you stopped playback

by pressing sSTOP/OFF/CHARGE.

When the resume function is on, all-track

repeat is selected automatically.

To cancel resume function, set the HOLD

switch to OFF.

Note

• Resume play may start at a point about 30

seconds behind or ahead the stopped point.

Resume play may not operate if you

stopped at the last 30 seconds of the final

track.

• Resume play will be canceled if you open

the disc compartment. If the unit is turned

off, resume play will not be canceled. In this

case, be sure to set the HOLD switch to

OFF before changing discs.

12

ENGLISH

PROGRAM PLAY

2

1,3

5

STOP/OFF/

CHARGE

Up to 24 tracks can be chosen for program

play.

1 Press PRGM/ENTER/DISPLAY in

standby mode to display .

2 Select the desired track by pressing

r or t.

a track number

b program number

PRGM / ENTER /

DISPLAY

SKIP /

SEARCH

Repeat play

Press PLAY MODE during playback to select

repeat play as follows.

: one-track repeat B

V

: all-track repeat

V

no repeat play (normal play)

PLAYBACK OF AUDIO DISC

ENGLISH

13

ENGLISH

3 Press PRGM/ENTER/DISPLAY

within 4 seconds.

If it is not pressed within 4 seconds, the

track number changes to 00. Repeat the

procedure from step 2 again.

4 Repeat steps 2 and 3 to program

more tracks.

5 Press ePLAY/PAUSE to start

program play.

To stop program play

Press sSTOP/OFF/CHARGE.

To add tracks to the program

Repeat steps 2 and 3 before while in standby

mode. You can add tracks to the end of the

program.

To erase the program

Press s STOP/OFF/CHARGE while in

standby mode.

PRGM / ENTER /

DISPLAY

Note

• The program is also erased when the disc

compartment is opened or the auto power

off function turns power off.

• When the 24 tracks are programmed,

“PROG-FULL” appears, and no more tracks

may be added.

• You cannot back to previous track by

holding r pressed during program play.

• Repeat play and random play can be

performed during program play.

14

ENGLISH

PLAYBACK OF MP3 DISC

• An MP3 file stores audio data

compressed using MPEG1/2, the audio

layer-3 file-coding scheme.

• In this manual, CDs, CD-R discs and

CD-RW discs are all referred to as

“discs”. We refer to what are called

“folder” and “file” in PC terminology as

“album” and “track”.

Notes on playing MP3 files

• An MP3 track must be recorded on a disc

in the format compliant with ISO 9660.

Note, however, that the unit may not play

tracks in the order they were recorded.

• The maximum allowable number of tracks

and albums in a disc are as follows:

– number of tracks : 512 (depending on the

number of albums)

– number of albums : up to 512 (depending

on the number of tracks)

• The maximum allowable depth of nested

albums is 8.

• E•A•S•S PLUS does not function.

• It may take 30 seconds or more before the

unit can start play of MP3 tracks, depending

on the number of recorded tracks and the

complexity of the album tree.

• If a disc contains audio tracks and MP3

tracks, the unit plays only the audio tracks.

• As for a multi-session disc, up to 10 sessions

are recommended.

• The unit may not play MP3 tracks recorded

using a packet writing utility.

• The unit can play MP3 tracks having a file

extension “.mp3”.

• If you play a non-MP3 track that has the

“.mp3” file extension, you may hear some

noise.

• The sound may skip or mute during

playback of files encoded with bit rate

between 256 kbps and 320 kbps.

Notes on display indications during

play

• Up to 64 characters (including its extension)

are displayed for the name of an album or

a track. If ID3TAG version 1.X was applied

to record additional informations for an

MP3 track, up to 30 characters showing

track title and artist’s name are displayed.

Characters other than uppercase letters

(“A” to “Z”), numerals (“0” to “9”) and an

underscore (_) may not be displayed

correctly or is displayed instead of the

character.

• The elapsed playing time may not be

displayed correctly for MP3 tracks.

ENGLISH

15

ENGLISH

Notes on creating MP3 discs

When converting audio data to MP3

To enjoy high sound quality, we recommend

storing MP3 files with a sampling frequency

of 44.1 kHz and a fixed bit rate of 128 kbps.

To play tracks in the order they were

recorded

1 Use a writing software capable of

recording MP3 tracks (files) in

numerical and alphabetical order.

For details on using the software, refer to

the operating instructions supplied with

the software.

2 Use only one album. (Do not create

a sub-album within an album.)

3 Include a two- or three- digit number

at the beginning of each album or

track name so that the albums and

tracks are played in order.

01XXXXX.mp3

02XXXXX.mp3

03XXXXX.mp3

04XXXXX.mp3

05XXXXX.mp3

1XXXXX.mp3

5XXXXX.mp3

10XXXXX.mp3

15XXXXX.mp3

20XXXXX.mp3

(Numbers at the beginning have

different digit number. The tracks will

not be played in this order but played in

the order of “1”, “10”, “15”, “20” and “5”.)

16

ENGLISH

3 Insert an MP3 disc.

4 Release the HOLD switch.

5 Press ePLAY/PAUSE to start

playback.

a appears when an MP3 disc is inserted

b track number

c album number

d elapsed playing time

Power is turned on and “READING”

flashes in the display.

After reading the disc, playback starts

from the first track of the Album 1.

PLAYBACK OF MP3 DISC

4

STOP/OFF/

CHARGE

MP3

MODE

1

5

2

3

1 Connect the supplied headphones

to the \/LINE OUT jack.

/LINE OUT

2 Set the START MODE switch to

select the disc reading format.

START MODE

NORMALQUICK

Please refer to “Setting the START MODE

switch” on the next page and set the

switch to correct position.

ENGLISH

17

ENGLISH

Setting the START MODE switch

Set the switch to the correct position

depending on the playback mode and type

of disc.

QUICK

The unit reads only the number of the album

before playback, then disc reading finishes

earlier. However, program play and random

play cannot be operated.

The unit reads the track information during

playback. When the unit detects an album

that has no mp3 file, the number of album is

decreased. This position is recommended

when playing back a disc recorded many

albums.

NORMAL

The unit reads the number of albums and

tracks before playback, then it takes longer

time for disc reading than when the switch is

set to QUICK.

Note

If you slide the START MODE switch during

playback, the disc reading format is not

changed. Stop playback and press

sSTOP/OFF/CHARGE to turn off the power,

and slide the START MODE switch to change

the disc reading format.

To select MP3 playback mode

Press MP3 MODE repeatedly to select the

playback mode.

Disc mode

All tracks recorded in the disc are played

back.

Album mode

All tracks in the current album are played

back.

To stop playback

Press sSTOP/OFF/CHARGE.

Playback stops and disc reading format

(NORMAL or QUICK) is displayed.

To search for a beginning of a track

Press r or t.

18

ENGLISH

PLAYBACK OF MP3 DISC

To locate a desired passage

Keep r or t pressed. Release the

button at the start of desired passage.

• You cannot monitor the sound while the

button is pressed during MP3 file playback.

To pause playback

Press ePLAY/PAUSE. To resume, press

it again.

To change the album

ALBUM

SKIP

Press ALBUM SKIP.

To skip to the first track of next album, press

i.

To skip to the first track of previous album,

press k.

Display during playback

PRGM / ENTER /

DISPLAY

Press PRGM/ENTER/DISPLAY during

playback to change the display as follows.

b Current track name

The file name of the current track is

displayed.

V

ID3 TAG

The ID3 TAG of the current track is

displayed.

If the ID3 TAG is not recorded on the

current track, “No Title” is displayed.

V

Normal display

The elapsed time of the current track is

displayed.

ENGLISH

19

ENGLISH

Resume function

Set the HOLD switch to RESUME.

RESUME

HOLD

OFF

appears, and you can start playback

from the point where you stopped playback

by pressing sSTOP/OFF/CHARGE.

When the resume function is on, all-track

repeat is selected automatically.

To cancel resume function, set the HOLD

switch to OFF.

Note

• Resume play may start at a point about 30

seconds behind or ahead the stopped point.

Resume play may not operate if you

stopped at the last 30 seconds of the final

track.

• Resume play will be canceled if you open

the disc compartment. If the unit is turned

off, resume play will not be canceled. In this

case, be sure to set the HOLD switch to

OFF before changing discs.

• Resume play will be canceled after the

batteries are removed or the AC adaptor is

disconnected.

Repeat play

Press PLAY MODE during playback to select

the repeat play as follows.

b : one track repeat

The current track is played back

repeatedly.

V

: all track repeat

All tracks on the disc are played back

repeatedly during DISC MODE

playback.

All tracks of the current album are

played back repeatedly during ALBUM

MODE playback.

V

no repeat play (normal play)

20

ENGLISH

PLAYBACK OF MP3 DISC

Random play

• Before random play, set START MODE to

NORMAL (Please refer to page 17).

2

1

1 Press PLAY MODE in standby mode

to display

.

2 Press ePLAY/PAUSE to start

playback.

All tracks on the disc are played back in

random order during DISC MODE

playback.

All tracks of the current album are played

back in random order during ALBUM

MODE playback.

To cancel random play, press PLAY MODE

in standby mode. display changes to

.

Note

• You cannot back to previous track by

pressing r during random play.

• You cannot select one-track repeat during

random play.

Program play

• Before program play, set START MODE to

NORMAL (Please refer to page 17).

• Up to 24 tracks can be chosen for program

play.

3

1,4

6

2

STOP/OFF/

CHARGE

1 Press PRGM/ENTER/DISPLAY in

standby mode to display

.

PRGM / ENTER /

DISPLAY

La page charge ...

Aiwa XP-MP3 Operating Instructions Manual

Aiwa XP-MP3 Operating Instructions Manual

dans d''autres langues

Documents connexes

Autres documents