AIPTEK Flipcam Guide de démarrage rapide

  • Bonjour ! Je suis un chatbot IA spécialement formé pour vous aider avec le AIPTEK Flipcam Guide de démarrage rapide. J’ai déjà parcouru le document et peux vous fournir des réponses claires et précises.
Flipcam
Quick Start
Get started, shoot and
upload
Introduction
! The Aiptek Flipcam 4 GB is a pen cam HD-
camera.
! To read a complete manual check out:
http://www.goaiptek.com/manuals/
manual-pencamhd.pdf
Get started
! Turn on/off the camera by pressing the
Power button for one second.
! To record a video set the switch, placed
above the Power
button, to camcorder
mode.
!
Shoot
! Start/stop recording by pressing the red
record button on the front.
! Zoom in/out while recording on the
directional +/- buttons.
Review videos
! View your videos by pressing the Playback
button. The last recorded video will play
automatically.
! During playback, press and hold down
the directional button left/right to fast
rewind/forward the video. Tap left/right to
shift between video files.
Delete videos
! In playback mode select the unwanted video with
the directional button left/right.
! Delete the video by pressing the Trash can button.
Select “Yes” by pressing the Playback button.
! Delete all files by using the directional button left/
right and select “All”. Press the Playback button.
Then select “Yes” and press the Playback button
to confirm.
Upload
! Connect the camera to a computer with the
USB cable.
! The system enters USB Slave mode. The
internal memory is then treated as a
removable disk on the computer, allowing
you to directly copy or delete files stored in
the camcorder.
! Your are now ready to edit your videos.
"
/