Paradigm Premier 800F Manuel utilisateur

Owner’s Manual

RECYCLING AND REUSE GUIDELINES (Europe)

In accordance with the European Union WEEE (Waste Electrical and Electronic Equipment) directive effective August 13, 2005, we

would like to notify you that our speakers may contain regulated materials which, upon disposal, require special reuse and recycling

processing. For this reason Paradigm Electronics Inc. (the manufacturer of Paradigm speakers and Anthem electronic products) has

arranged with its distributors in European Union member nations to collect and recycle this product at no cost to you. To find your

local distributor please contact the dealer from whom you purchased this product or go to our website at www.paradigm.com.

Please note that only the product falls under the WEEE directive. When disposing of packaging and other shipping material we

encourage you to recycle through the normal channels.

MAN0149 | 020118

Thank you!

Thank you for choosing Paradigm Premier Series speakers. You are

about to hear the difference that sonically accurate speakers make in

your audio/home theater system! They are the product of countless

hours of comprehensive research and development and will reward

you with truly exceptional sound for many years.

To ensure proper installation and enjoy all of the exceptional sound

these speakers are designed to provide, please read this manual

and follow all instructions. If you have further questions contact your

Authorized Paradigm Dealer or visit the Q&A page on our website at

www.paradigm.com.

Floorstanding Speakers —

Attaching Carpet Spikes or Rubber Caps ................................... 2

Bookshelf / Center Channel Speakers —

Applying Rubber Pads .................................................................... 3

Your New Speakers ....................................................................... 4

Preventing Speaker Damage ........................................................ 5

Room Acoustics ............................................................................ 7

Placement: Front Left & Right Speakers ..................................... 8

Placement: The Center Speaker ................................................ 12

Placement: Surround/Rear Speakers ........................................ 13

Wiring ............................................................................................ 14

Standard Connection (Premier 100B and 200B) ....................... 15

Other Connection Options .......................................................... 16

Fine Tuning ................................................................................... 21

Troubleshooting Guide ............................................................... 22

Limited Warranty ......................................................................... 23

TABLE OF CONTENTS

2

Floor (Wood or Tile) Carpet

FLOORSTANDING SPEAKERS —

ATTACHING CARPET SPIKES OR

RUBBER CAPS

OR

The screw thread specification is 1/4”-20.

paradigm.com

3

BOOKSHELF / CENTER CHANNEL

SPEAKERS — APPLYING RUBBER PADS

BOOKSHELF SPEAKERS (Premier 100B and 200B)

Self-adhesive rubber pads (included) must be applied to the bottom

corners of bookshelf and center channel speakers (as shown) when

placed on a shelf or other flat surface.

CENTER CHANNEL SPEAKERS (Premier 500C and 600C)

Apply self-adhesive rubber pads (included) as shown on the Rubber Pad

Installation Template.

Front View of

Bumper Pad

Bottom View of Bookshelf Speaker

4

Break-In

Although Paradigm Premier Series speakers sound great “out of the

carton,” they will sound even better when broken in. Allow them to

operate for several hours before you listen critically.

High-frequency drivers use ferro-fluid that can thicken at temperatures

below 10° C (50° F). If your speakers have been transported or stored in

the cold let them warm to room temperature before use.

Cleaning

Do not use a strong or abrasive cleaner on your speakers. Clean

them with a damp soft cloth, but do not get them wet. Do not place

wet objects, such as drinking glasses or potted plants, on top of the

speakers. If allowed to soak in, even a small amount of water may

permanently damage the speaker enclosure.

Optional Spikes and Rubber Feet

Floorstanding speakers ship with rubber feet pre-installed. These can

be easily removed if you intend to use isolation spikes (included with

floorstanding speaker models). We highly recommend installing these

spikes as they will improve the sound of your speakers by isolating them

from the floor. The most convenient time to install these spikes is during

the unpacking process.

Optional Paradigm Speaker Stands

We highly recommend placing Paradigm Premier Series bookshelf

speakers on high-performance Paradigm speaker stands (sold

separately), or bookshelves to raise the high-frequency drivers to

approximately ear level, thereby ensuring the best performance possible.

YOUR NEW SPEAKERS

paradigm.com

5

To prevent damage to your speakers, please read the following

guidelines before making any connections.

Amplifier Distortion—The #1 Culprit!

Amplifier distortion is the principle cause of speaker damage. When

listening at higher volume levels, your amplifier may run out of clean

power and begin to produce a distorted signal if levels are increased any

further. This will damage any brand of speaker very quickly. (See your

Authorized Paradigm Dealer for amplifier recommendations).

More Powerful Amplifiers are Safer

When choosing an amplifier, always select an amplifier with a power

rating greater than that of the speaker. Using a 100W per channel

amplifier on a 50W speaker allows the amplifier adequate headroom in

order to provide a distortion free signal. Conversely, using a 40W per

channel amplifier on a 50W speaker limits the amplifier’s headroom. This

causes the amplifier to enter its distortion level much sooner, potentially

damaging the speaker.

Volume Control

Do not be fooled by the Volume Control of your receiver/preamplifier. It

only adjusts listening level—it is not a “power-output” dial. The amount of

amplifier power actually used at a given Volume Control setting depends

solely on the nature of the music you are listening to. At a given Volume

Control setting a quiet section of music will use less amplifier power than

a loud section. With typical pop-rock, jazz or large scale classical music

the rated output power of many receivers/amplifiers is often reached

when the Volume Control is between the “11” and “1” o’clock settings

(with bass/ treble and loudness controls not used—otherwise rated

power may be reached at even lower Volume Control settings).

Remember, all amplifiers produce distortion when operated beyond their

rated output power. The resulting distortion will damage all speakers!

Exercise caution! If you listen at loud levels, be careful to listen for the

point of audible distortion—if the speakers begin to sound distressed,

turn the Volume Control down or your speakers and/or amplifier(s) will

be damaged! This type of damage constitutes abuse and is not covered

by the warranty. If louder volumes are desired, obtain a more powerful

amplifier.

PREVENTING SPEAKER DAMAGE

6

There is a Limit!

Although more powerful amplifiers are safer, there is a point at which

you could have more power than the speaker can handle. At that point

you will overpower the speaker and damage it. Exercise caution! At loud

levels do not increase bass/treble controls from zero and ensure that

all loudness/ contour/bass EQ buttons are off (otherwise rated output

power will be reached at lower volume control settings). If you listen at

loud levels, watch for excessive visible cone excursion (grille movement)

from the woofer—then turn the Volume Control down.

The Right Amount of Power

A power-range rating is given as a guide to indicate the approximate

minimum and maximum power input of your Paradigm speakers.

Amplifiers that exceed your speaker’s power-range rating are

recommended. Their greater power reserves provide better sound.

However, exercise caution! Use the speakers within their power-range

rating to prevent damage (keep listening levels below the point of

excessive woofer cone excursion).

PREVENTING SPEAKER DAMAGE (cont’d)

paradigm.com

7

Paradigm Premier Series speakers are designed to provide exceptional

sound in a wide variety of domestic settings. However, it is important

to note that listening room construction, dimensions and furnishings all

play a part in the quality of sound you will ultimately achieve. Your listening

room will impose its own character on the performance capabilities of any

speaker system. The extra care you take in correctly positioning the

speakers will result in greater listening enjoyment. Keep the following

guidelines in mind when deciding on the best speaker placement:

• Mid and high frequencies are affected by the amount of soft furnishings

in your room—curtains, carpets, sofas, wall coverings, etc. An excess

of such items can result in a somewhat dull sound. The same room

without any soft furnishings can produce an overall bright sound. The

typical quantity of soft furnishings found in most living environments

provides the right acoustic characteristics to allow the speakers to

sound balanced;

• Concrete floors and walls tend to aggravate low-frequency standing

wave problems and are less preferred;

• Rooms where height, width and length are similar should be

avoided as they can exhibit significant low-frequency standing wave

problems. This may result in reduced clarity. If no other room is possible,

experiment with speaker placement to minimize acoustic problems.

ROOM ACOUSTICS

8

PLACEMENT: Front Left & Right Speakers

Ideal placement of front and center speakers

Paradigm Premier Series front speakers are designed to

allow flexible placement while providing a very large window

of sound throughout your listening room. To ensure the best

performance possible we strongly recommend that you

observe the placement guidelines on the following pages …

paradigm.com

9

Accurate Timbre

For the most accurate and natural timbre, place front speakers so that

their high-frequency drivers are approximately at ear level, as shown.

Placing bookshelf models on Paradigm speaker stands (sold separately)

or bookshelves raises their high-frequency drivers to approximately ear

level, thereby ensuring the best performance possible.

8” (20 cm)

8po (20 cm)

10

Balanced Bass

Placing front speakers in corners will over-emphasize bass and reduce

overall clarity. Avoid corner placement. Position front speakers 8 in

(20 cm) or more from the wall behind the speaker and as much as

possible from either side wall, as shown in. This will ensure better bass

performance and optimal midrange clarity.

PLACEMENT: Front Left & Right Speakers

(cont’d)

8” (20 cm)

8po (20 cm)

paradigm.com

11

Optimal Imaging

Measure the distance from your main listening area to the front speakers

(“X”). For best imaging, place speakers from three-quarters of that

distance up to that same distance from each other (3/4 of “X” to “X”),

as shown. To further optimize imaging, toe speakers slightly inward so

they point toward the listening position with their axes crossing just behind

it, as shown.

12

The Paradigm Premier Series center speaker is designed to cover a

large, wide listening area, allowing listeners throughout the room to hear

center-channel information with unprecedented clarity and intelligibility.

Placing your center-channel speaker below the TV will ensure the

best possible clarity and intelligibility. Position the speaker flush with

the front of the TV or speaker shelf to minimize unwanted sound

reflections. Make sure the center-channel speaker is approximately

the same distance away from the primary listening position as your

front speakers. (Some A/V receivers and processors can electronically

adjust for differences in distance.)

PLACEMENT: Center Speaker

paradigm.com

13

Paradigm Premier bookshelf speakers may also be used as surround or

rear speakers. Remember to keep these speakers well away from the

main listening area for optimal surround-sound performance.

5.1 Surround Speaker Placement

for Paradigm Premier 100B & 200B

SURROUND SPEAKER PLACEMENT

FOR PARADIGM PREMIER 100B & 200B

7.1 Surround Speaker Placement

for Paradigm Premier 100B & 200B

90˚

135˚

150˚

90˚

110 ˚

135˚

150˚

110 ˚

90˚

135˚

min. 2 ft. min. 2 ft.

150˚

90˚

90˚ 90˚

110 ˚

135˚

150˚

110 ˚

110 ˚110 ˚

110 ˚

120˚

110 ˚

120˚

5.1 Surround Speaker Placement

for Paradigm Premier 100B & 200B

7.1 Surround Speaker Placement

for Paradigm Premier 100B & 200B

5.1 Surround Speaker Placement

for Paradigm Premier 300S & 400S

7.1 Surround Speaker Placement

for Paradigm Premier 300S & 400S

90˚

135˚

150˚

90˚

110 ˚

135˚

150˚

110 ˚

90˚

135˚

min. 2 ft. min. 2 ft.

150˚

90˚

90˚ 90˚

110 ˚

135˚

150˚

110 ˚

110 ˚110 ˚

110 ˚

120˚

110 ˚

120˚

5.1 Surround Speaker Placement

for Paradigm Premier 100B & 200B

7.1 Surround Speaker Placement

for Paradigm Premier 100B & 200B

5.1 Surround Speaker Placement

for Paradigm Premier 300S & 400S

7.1 Surround Speaker Placement

for Paradigm Premier 300S & 400S

PLACEMENT: Surround / Rear Speakers

14

WIRING

For optimum sound, the use of high quality speaker cable is essential.

The chart below identifies the minimum gauge requirements for various

lengths. See your Authorized Paradigm Dealer for recommendations.

MINIMUM GAUGE REQUIREMENTS

LENGTH DIAMETER GAUGE

Under 4.5 m (15 ft) 1.3 mm (0.05 in) 16 awg

Under 9 m (30 ft) 1.6 mm (0.06 in) 14 awg

Over 9 m (30 ft) 2.0 mm (0.08 in) 12 awg

Turn your amplifier(s) OFF before connecting your

speakers. This will avoid damage which could

result from accidental shorting of speaker cables.

paradigm.com

15

Your speakers’ binding posts can be used with banana, pin or spade

connectors, as well as with bare wire. Tighten the posts firmly by hand

but do not over tighten!

Correct polarity (or phase) is critical for proper soundstage imaging and

bass performance. Connect one speaker at a time to ensure proper

connection of every channel. The red (+) amplifier terminal must be

connected to the red (+) speaker terminal. The same applies to the black (–)

terminals. Make sure all wires are firmly fastened. Repeat this connection

procedure for each speaker in your system.

NOTE: If you hear a distinct lack of bass and a dislocated stereo image then

one or more of your speakers may be connected out of phase (polarity is

reversed). Re-check to ensure that each speakers’ cable is connected with

correct polarity: red (+) to red (+) and black (–) to black (–).

-+

STANDARD CONNECTION

(Premier 100B and 200B)

16

Some Paradigm Premier Series speakers have two sets of input

terminals connected externally with jumper bars. These speakers can

be bi-wired or also bi-amplified to achieve even better performance.

If your speakers do not have two sets of input terminals this section

does not apply to you.

OTHER CONNECTION OPTIONS

DO NOT attempt to bi-wire or bi-amplify speakers

unless you have removed the jumper bars.

paradigm.com

17

-+

Standard Connection of Speakers with Two Input Terminals

For standard connection of speakers with two input terminals, leave

the jumper bars attached and connect using either set of input terminals.

18

-+

Bi-wire Connection

Bi-wiring can improve clarity and openness with less grain and more

solidity to the bass. Two speaker cables are required for each speaker

that is bi-wired.

OTHER CONNECTION OPTIONS (cont’d)

La page charge ...

Paradigm Premier 800F Manuel utilisateur

Ce manuel convient également à

Paradigm Premier 800F Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents