Watchguard Firebox M200/M300 Hardware Guide

Marque: Watchguard

Modèle: Firebox M200/M300

Taper: Hardware Guide

WatchGuard

Firebox

M200 & M300

Hardware Guide

ML3AE8

ii WatchGuard Firebox M200 & M300

ADDRESS

505 Fifth Avenue South

Suite 500

Seattle, WA 98104

SUPPORT

www.watchguard.com/support

U.S. and Canada +877.232.3531

All Other Countries +1.206.521.3575

SALES

U.S. and Canada +1.800.734.9905

All Other Countries +1.206.613.0895

ABOUT WATCHGUARD

WatchGuard® Technologies, Inc. is a global leader in network security, providing best-

in-class Unified Threat Management, Next Generation Firewall, secure Wi-Fi, and

network intelligence products and services to more than 75,000 customers worldwide.

The company's mission is to make enterprise-grade security accessible to companies of

all types and sizes through simplicity, making WatchGuard an ideal solution for

Distributed Enterprises and SMBs. WatchGuard is headquartered in Seattle,

Washington, with offices throughout North America, Europe, Asia Pacific, and Latin

America. To learn more, visit WatchGuard.com.

For additional information, promotions and updates, follow WatchGuard on Twitter,

@WatchGuard on Facebook, or on the LinkedIn Company page. Also, visit our InfoSec

blog, Secplicity, for real-time information about the latest threats and how to cope with

them at www.secplicity.org.

WatchGuard, the WatchGuard logo, LiveSecurity, and any other mark listed as a trademark in the “Terms of Use” portion of

the WatchGuard Web site that is used herein are either registered trademarks or trademarks of WatchGuard Technologies,

Inc. and/or its subsidiaries in the United States and/or other countries. All other trademarks are the property of their

respective owners.

Printed in the United States of America.

Part Number: 275-5150-001 Rev E

Revised: June 22, 2017

U.S. Patent Nos. 6,493,752; 6,597,661; D473,879. Other Patents Pending.

Notice to Users

Information in this guide is subject to change without notice. Updates to this guide are posted at:

http://www.watchguard.com/help/documentation/hardware.asp

Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this guide may be

reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express

written permission of WatchGuard Technologies, Inc.

Complete copyright, trademark, patent, and licensing information can be

found in the WatchGuard product documentation. You can find this

document online at:

http://www.watchguard.com/help/documentation/

Hardware Guide 1

Hardware Specifications

WatchGuard security appliances deliver unparalleled unified threat management, superior performance, ease

of use, and value. Powerful subscription-based security services boost protection in critical attack areas for

multiple layers of defense.

This guide introduces the Firebox M200 and M300, RoHS-compliant (lead-free) hardware products offered by

WatchGuard.

Fireware OS

The Firebox M200 and M300 devices use WatchGuard’s next generation UTM OS — Fireware® OS. Each Firebox

device includes Fireware OS and delivers exceptional protection against today's sophisticated threats to make

sure that your business stays connected. For more information on the features of Fireware OS, see the current

Fireware Help.

2 WatchGuard Firebox M200 & M300

Hardware Specifications

Package Contents

 Firebox M200 or M300 device

 Quick Start Guide

 1 straight-through Ethernet cable (green)

 1 cross-over Ethernet cable (red)

 1 serial cable with an RJ-45 connector (console cable)

 3 power cords (US, EU, UK)

 2 rack mount ears

 8 screws for rack mount ears

 4 rubber feet

About Your Hardware

Hardware Specifications

Interface Specifications

Firebox M200 Firebox M300

Processor Freescale T1042 CPU Freescale T2081 CPU

Storage Micro SD 8 GB Micro SD 8 GB

Memory: RAM 2GB DDR3L 1600MT/s, 64-bits width,

non-ECC, U-DIMM type

4GB, DDR3L 1600MT/s, 64-bits width,

with ECC, U-DIMM type

Power supply 100W, 100~240 VAC, 3-1.5A, 50-60 Hz 100W, 100~240 VAC, 3-1.5A, 50-60 Hz

Dimensions Depth: 12” (30.5 cm)

Width: 17” (43.1 cm)

Height: 1.73” (4.4 cm) - 1U

Depth: 12” (30.5 cm)

Width: 17” (43.1 cm)

Height: 1.73” (4.4 cm) - 1U

Weight 8.4 lbs (3.8 kg) 8.4 lbs (3.8 kg)

Network interfaces 8x 1000 Base-TX (10/ 100/1000Mbps), RJ45 connector

I/O interfaces 2 USB 2.0

1 RJ45 Serial Port

Hardware Guide 3

Hardware Specifications

Environmental Requirements

To safely install your Firebox, we recommend that you:

 Install it in a network rack

 Put it in a secure area, such as a locked room, to block the device from people who do not have

permission to use it

 Connect it to a conditioned power supply to prevent damage from sudden power changes

Other environmental requirements:

Operating temperature 0 - 40°C

(32 – 104°F)

Operating humidity 10% – 85% non-condensing

Non-operating temperature –40 – 70°C

(–40 – 158°F)

Non-operating humidity 10%–95%, non-condensing

4 WatchGuard Firebox M200 & M300

Hardware Specifications

Hardware Description

Front View

Firebox M300 front panel:

Left front:

Buttons and Indicators

Power ( )

The power indicator is green when the device is powered on.

Arm/Disarm ( )

When the device is armed and ready to pass traffic, this indicator is green. When the device is

powered on, but not ready to pass traffic, this indicator is red.

Storage ( )

When there is activity on the internal storage, this indicator is yellow.

Power Button ( )

The Power button is lit to indicate power status. It is green when the Firebox is powered on, and red

when power is available, but the Firebox is powered off.

 When the power button is red, press it to power on the Firebox.

 When the power button is green, press it to immediately power off the Firebox.

Some Firebox hardware revisions do not have a front power button.

The hardware revision is the last letter of the barcode on the rear of the Firebox, to the right of the

WatchGuard serial number sticker.

Front power button M200 Hardware Revisions M300 Hardware Revisions

No A - G

I and later

A - D

F and later

Yes H E

Hardware Guide 5

Hardware Specifications

Reset Button

Use the Reset button to reboot the Firebox or reset the configuration to factory-default settings.

 To reboot the Firebox, press and hold the Reset button for five seconds.

 To reset the Firebox configuration to factory-default settings, use the procedure in “Restore

Factory-Default Settings” on page 7.

Interfaces

Firebox M200 and M300 devices have eight network interfaces, two USB interfaces, and one console port.

Serial port

An RJ45 connector for the serial interface is located to the left of the USB interfaces. You can connect

to this serial interface to log in to the Fireware command line interface.

For more information about the Fireware command line interface, see the Fireware Command Line

Interface Reference.

Dual USB interfaces

Connect a USB storage device to use for USB backup and restore, or to store a support snapshot. For

more information about USB functions, see the current Fireware Help.

RJ45 interfaces

Interfaces 0 - 7 are RJ45 Ethernet interfaces that support link speeds of 10, 100, or 1000 Mbps. Each

RJ45 interface has a pair of indicators. The right indicator shows the interface connection status. The

left indicator shows interface activity.

Interfaces 0, 1, and 2 do not support 10/100 half duplex.

Indicator Indicator color Interface Status

Connection (right) Yellow Link at 1000 Mbps

Green Link at 100 Mbps

Not lit Link at 10 Mbps, or no link

Activity (left) Yellow, blinks Power on, network activity

Not lit Power off, no connections

6 WatchGuard Firebox M200 & M300

Hardware Specifications

Rear View

Cooling fan

The fan decreases the internal temperature of the device. The fan starts at maximum RPM when the

device is powered on. The device adjusts the fan speed based on the external temperature and

device CPU load.

Power Switch

Controls the power supplied to the device.

AC receptacle

Accepts a detachable AC power cord supplied with the device. The power supply is a WatchGuard

standard auto-sensing AC power supply.

You must disconnect the AC power cord from the device before you remove the cover of the

Firebox for any reason.

Rack Mount Instructions

Each Firebox device ships with rack mount ears for installation in a network rack. When you install the device

in a rack, make sure you consider these factors:

Elevated Operating Ambient Temperature

If you install the device in a closed or multi-unit rack assembly, the operating ambient temperature

of the rack environment may be greater than room ambient. Make sure the ambient temperature of

the rack environment is within the certified operating range specified in this Hardware Guide.

Reduced Air Flow

When you install the device in a rack, make sure that the amount of air flow required for safe

operation of the equipment is not compromised.

Mechanical Loading

When you mount the device in the rack, avoid hazardous conditions caused by uneven mechanical

Circuit Overloading

Make sure you connect the device to the power supply circuit in such a way that there is no

overloading of the circuits, and no impact on overcurrent protection and supply wiring.

Reliable Grounding

Make sure all rack-mounted equipment is correctly grounded. For example, make sure you use power

strips instead of direct connections to the branch circuit.

Hardware Guide 7

Hardware Specifications

To install your Firebox in a network rack:

1. Locate the two rack ears and eight mounting screws included with your Firebox.

To attach each rack ear to the Firebox, use two large and two small screws.

2. Align the four holes in a rack ear with the four holes on one side of the Firebox.

3. Use two of the smaller screws to connect the front of the rack ear to the Firebox.

4. Use two of the larger screws to connect the back of the rack ear to the Firebox.

5. Repeat these steps to connect a rack ear to the other side of the Firebox.

6. You can use rack screws and a washer (not included) to attach the rack ears to the rack.

Restore Factory-Default Settings

If you ever need to, you can restore your Firebox to its factory-default settings. For example, if you do not know

the administrator account passphrase or you want to start over with a new configuration, you can reset your

device. Make sure you back up your device configuration before you reset your device in case you want to

restore it in the future.

To reset your device:

1. Power on the device.

2. Wait until the Arm indicator is green.

3. Press and hold the Reset button on the front of the device.

4. Continue to hold the Reset button while the Arm indicator is red.

5. Continue to hold the Reset button while the Arm indicator flashes green once per second.

6. After the Arm indicator flashes green twice per second, release the Reset button.

7. Wait until the Arm indicator starts to flash red.

8. Press and hold the Reset button for five seconds to reboot the device.

Use large screws here

Use small screws here

8 WatchGuard Firebox M200 & M300

Hardware Specifications

Safety Notices

All WatchGuard products are designed and tested to meet strict safety requirements. These requirements

include product safety approvals and other global compliance standards. Read these instructions carefully

before you operate the product, and refer to them as needed for continued safe operation of your product.

Product Safety Certification

The WatchGuard product is safety certified for these standards:

 CAN/CSA C 22.2 No. 60950-1-07+A1:2011+A2:2014

 UL 60950-1:2007 R10.14

 IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013

 EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013

Safety Warning

 Do not place objects on the power cord.

 Do not obstruct the ventilation openings. These openings prevent overheating of the device.

 Never push objects of any kind into slots or openings on this equipment. If you make contact with a

voltage point or short out a part, it can result in fire or electrical shock.

 If the equipment is supplied with a three-conductor AC power cable, the power cable must be plugged

in to an approved three-contact electrical outlet with the grounding wire connected to an electrical

ground (safety ground) at the power outlet.

 When you remove or install a device, follow the general installation safety instructions provided in this

Hardware Guide to avoid injury or damage to the device.

 The lithium battery used in the security appliance may not be replaced by the user. Return the

appliance to a WatchGuard authorized service center for replacement with the same or equivalent

type recommended by the manufacturer. If, for any reason, the battery or security appliance must be

disposed of, do so following the battery manufacturer’s instructions.

WARNING: Risk of explosion if the battery is replaced by an incorrect type. Dispose of used

batteries according to the instructions.

Hardware Guide 9

Hardware Specifications

Hinweise Zur Sicherheit

Alle WatchGuard Produkte werden entwickelt und getestet, um strenge Sicherheitsanforderungen zu

erfüllen. Diese Anforderungen umfassen Produktsicherheit Zulassungen und andere globale Compliance-

Standards. Bitte lesen Sie die folgenden Anweisungen sorgfältig, bevor Sie das Produkt, und bezeichnen sie

als notwendig, um den sicheren Betrieb des Geräts zu gewährleisten. Weitere Informationen finden Sie in der

elektronischen Hardware Guide.

Die WatchGuard Produkt ist Sicherheit unter den folgenden Normen zertifiziert:

 CAN/CSA C 22.2 No. 60950-1-07+A1:2011+A2:2014

 UL 60950-1:2007 R10.14

 IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013

 EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013

Sicherheitshinweis

 Legen Sie keine Gegenstände auf das Netzkabel.

 Sorgen Sie dafür, dass die Öffnungen der Ventilation zu keinem Zeitpunkt verschlossen, verstopft oder

anderweitig blockiert sind. Die Ventilation verhindert ein Überhitzen des Gerätes.

 Stecken Sie niemals Gegenstände irgendwelcher Art in Schlitze oder Öffnungen des Gerätes. Wenn Sie

Kontakt mit einem spannungsführenden Punkt oder ein Bauteil kurzschließen, kann es zu einem Brand

oder elektrischen Schlag führen.

 Falls dieses Gerät mit einem Schutzkontaktnetzkabel ausgeliefert wird, verwenden Sie ausschließlich

nur dieses an einer dafür vorgesehenen Netzsteckdose.

 Um Verletzungen oder Schäden am Gerät zu vermeiden, befolgen Sie vor dem Entfernen oder

Installieren des Gerätes die im Hardware Guide zur Verfügung gestellten allgemeinen Installations-

und Sicherheitshinweise.

 Die in dem Gerät verwendete Lithium-Batterie kann nicht vom Verbraucher getauscht werden. Bei

Bedarf senden Sie das Gerät an einen WatchGuard Autorisierten Service-Center, um diesen Tausch mit

einer vom Hersteller empfohlenen gleichen oder eines gleichwertigen Typs durchführen zu lassen.

Entsorgen Sie die Batterie, bzw. das Gerät gemäß Ihren örtlichen Entsorgungsbestimmungen.

10 WatchGuard Firebox M200 & M300

Hardware Specifications

Avis de sécurité

Tous les produits de WatchGuard sont conçus et testés pour répondre à des exigences de sécurité strictes. Ces

exigences incluent l'homologation de la sécurité du produit et la conformité à d'autres normes globales. Lisez

ces instructions avec attention avant de mettre en route l'appareil et reportez-vous-y au besoin pour assurer

une utilisation sûre de l'appareil.

Certifications de sécurité du produit

Les produits de WatchGuard répondent aux normes suivantes;

 CAN/CSA C 22.2 No. 60950-1-07+A1:2011+A2:2014

 UL 60950-1:2007 R10.14

 IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013

 EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013

Avertissement de sécurité

 Ne placez aucun objet sur le cordon d'alimentation.

 N'obstruez pas les ouvertures de ventilation. Ces ouvertures préviennent la surchauffe de l'appareil.

 N'insérez jamais d'objet de quelque sorte dans les fentes d'ouverture de cet équipement. Si vous faites

contact avec un point sous tension ou court-circuitez un composant, cela peut causer un incendie ou

un choc électrique.

 Si l'appareil est fourni avec un câble d'alimentation électrique à trois points (avec prise terre), le câble

d'alimentation doit impérativement être branché sur une prise à trois points correctement mise à la

terre.

 Quand vous enlevez ou désinstallez un équipement, suivez les instructions générales de sécurité

fournies dans ce Guide Matériel pour éviter toute blessure ou dégât à l'appareil.

 La batterie au lithium utilisée dans cet appareil de sécurité réseau ne peut pas être remplacée par

l'utilisateur final. Renvoyez cet appareil à un centre de service autorisé par WatchGuard pour un

remplacement avec une batterie du même type ou de type équivalent recommandé par le fabricant.

Si pour une raison quelconque la batterie ou cet équipement doit être mis au rebus, suivez les

recommandations du fabricant de la batterie.

Hardware Guide 11

Hardware Specifications

Aviso De Seguridad

Todos los productos WatchGuard están diseñados y probados para satisfacer estrictos requisitos de

seguridad. Estos requisitos incluyen la homologación de productos de seguridad y otras normas de

cumplimiento global. Por favor, lea atentamente las siguientes instrucciones antes de utilizar el producto, y se

refieren a ellos como sea necesario para garantizar el funcionamiento seguro y continuo de su producto.

Información adicional se puede encontrar en la Guía del usuario electrónica.

Certificación de seguridad del producto

El producto tiene certificación de seguridad WatchGuard bajo las siguientes normas:

 CAN/CSA C 22.2 No. 60950-1-07+A1:2011+A2:2014

 UL 60950-1:2007 R10.14

 IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013

 EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013

Advertencia de seguridad

 No coloque objetos sobre el cable de alimentación.

 No obstruya las aberturas de ventilación. Estas aberturas evitan el sobrecalentamiento de la máquina.

 Nunca introduzca objetos de ningún tipo en las ranuras o aberturas del equipo. El contacto con puntos

de voltaje o el cortocircuito de una pieza podría provocar un incendio o una descarga eléctrica.

 Si el equipo se suministra con un cable de alimentación de CA de tres conductores , el cable de

alimentación debe estar conectado a una toma de corriente de tres contactos aprobado con el cable

de tierra conectado a un (a tierra de seguridad) planta eléctrica en la toma de corriente.

 Al extraer o instalar un electrodoméstico, siga las instrucciones generales de instalación de seguridad.

 La batería de litio utilizada en el dispositivo de seguridad no podrá ser sustituido por el usuario.

Devuelva el aparato a un centro de servicio autorizado de WatchGuard para el reemplazo con el mismo

tipo o equivalente recomendada por el fabricante. Si , por cualquier razón , la batería o la seguridad del

aparato se debe desechar, hágalo siguiendo las instrucciones del fabricante de la batería.

12 WatchGuard Firebox M200 & M300

Hardware Specifications

Hardware Guide 13

Legal and Regulatory Information

Limited Hardware Warranty

This Limited Hardware Warranty (the “Warranty”) applies to the enclosed hardware product, not including any associated

software, which is licensed pursuant to a separate end-user license agreement and warranty (the “Product”). BY USING

THE PRODUCT, YOU (either an individual or a single entity) AGREE TO THE TERMS HEREOF. If you do not agree to these

terms, please return this package, along with proof of purchase, to the authorized dealer from which you purchased it for

a full refund. WatchGuard Technologies, Inc. (“WatchGuard”) and you agree as set forth below or on the reverse side of

this card, as applicable:

1. LIMITED WARRANTY. WatchGuard warrants that upon delivery and for one (1) year thereafter (the “Warranty Period”):

(a) the Product will be free from material defects in materials and workmanship, and (b) the Product, when properly

installed and used for its intended purpose and in its intended operating environment, will perform substantially in

accordance with WatchGuard applicable specifications.

This warranty does not apply to any Product that has been: (i) altered, repaired or modified by any party other than

WatchGuard except for the replacement or inclusion of specified components authorized in, and performed in strict

accordance with, documentation provided by WatchGuard; or (ii) damaged or destroyed by force majeure events,

accidents, power spikes or similar events, or by any intentional, reckless or negligent acts or omissions of any party. You

may have additional warranties with respect to the Product from the manufacturers of Product components. However,

you agree not to look to WatchGuard for, and hereby release WatchGuard from any liability for, performance of,

enforcement of, or damages or other relief on account of, any such warranties or any breach thereof.

2. REMEDIES. If any Product does not comply with the WatchGuard warranties set forth in Section 1 above, WatchGuard

will, following the receipt of the product you claim is defective and at its option, either (a) repair the Product, or (b)

replace the Product with a like or similar product; provided, that you will be responsible for returning the Product and for

all costs of shipping and handling. Repair or replacement of the Product shall not extend the Warranty Period. Any

Product, component, part or other item replaced by WatchGuard becomes the property of WatchGuard. WatchGuard

shall not be responsible for return of or damage to any software, firmware, information or data contained in, stored on, or

integrated with any returned Products.

3. DISCLAIMER AND RELEASE. THE WARRANTIES, OBLIGATIONS AND LIABILITIES OF WATCHGUARD, AND YOUR REMEDIES,

SET FORTH IN PARAGRAPHS 1 AND 2 ABOVE ARE EXCLUSIVE AND IN SUBSTITUTION FOR, AND YOU HEREBY WAIVE,

DISCLAIM AND RELEASE ANY AND ALL OTHER WARRANTIES, OBLIGATIONS AND LIABILITIES OF WATCHGUARD AND ALL

OTHER RIGHTS, CLAIMS AND REMEDIES YOU MAY HAVE AGAINST WATCHGUARD, EXPRESS OR IMPLIED, ARISING BY LAW

OR OTHERWISE, WITH RESPECT TO ANY NONCONFORMANCE OR DEFECT IN THE PRODUCT (INCLUDING, BUT NOT

LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ANY IMPLIED

WARRANTY ARISING FROM COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE, ANY WARRANTY OF

NONINFRINGEMENT, ANY WARRANTY OF UNINTERRUPTED OR ERROR-FREE OPERATION, ANY OBLIGATION, LIABILITY,

RIGHT, CLAIM OR REMEDY IN TORT, WHETHER OR NOT ARISING FROM THE NEGLIGENCE (WHETHER ACTIVE, PASSIVE OR

IMPUTED) OR FAULT OF WATCHGUARD OR FROM PRODUCT LIABILITY, STRICT LIABILITY OR OTHER THEORY, AND ANY

14 WatchGuard Firebox M200 & M300

Legal and Regulatory Information

OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY FOR LOSS OR DAMAGE TO, OR CAUSED BY OR CONTRIBUTED TO BY,

THE PRODUCT).

4. LIMITATION AND LIABILITY. WATCHGUARD'S LIABILITY (WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY),

TORT (INCLUDING ACTIVE, PASSIVE OR IMPUTED NEGLIGENCE AND STRICT LIABILITY AND FAULT) OR OTHER THEORY)

WITH REGARD TO ANY PRODUCT WILL IN NO EVENT EXCEED THE PURCHASE PRICE PAID BY YOU FOR SUCH PRODUCT.

THIS SHALL BE TRUE EVEN IN THE EVENT OF THE FAILURE OF ANY AGREED REMEDY. IN NO EVENT WILL WATCHGUARD BE

LIABLE TO YOU OR ANY THIRD PARTY (WHETHER ARISING IN CONTRACT (INCLUDING WARRANTY), TORT (INCLUDING

ACTIVE, PASSIVE OR IMPUTED NEGLIGENCE AND STRICT LIABILITY AND FAULT) OR OTHER THEORY) FOR COST OF COVER

OR FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOSS

OF PROFITS, BUSINESS, OR DATA) ARISING OUT OF OR IN CONNECTION WITH THIS WARRANTY OR THE USE OF OR

INABILITY TO USE THE PRODUCT, EVEN IF WATCHGUARD HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

THIS SHALL BE TRUE EVEN IN THE EVENT OF THE FAILURE OF ANY AGREED REMEDY.

5. MISCELLANEOUS PROVISIONS. This Warranty will be governed by the laws of the state of Washington, U.S.A., without

reference to its choice of law rules. The provisions of the 1980 United Nations Convention on Contracts for the

International Sales of Goods, as amended, shall not apply. You agree not to directly or indirectly transfer the Product or

use of the product or associated documentation to any country to which such transfer would be prohibited by the U.S.

Export laws and regulations. If any provision of this Warranty is found to be invalid or unenforceable, then the remainder

shall have full force and effect and the invalid provision shall be modified or partially enforced to the maximum extent

permitted by law to effectuate the purpose of this Warranty. This is the entire agreement between WatchGuard and you

relating to the Product, and supersedes any prior purchase order, communications, advertising or representations

concerning the Product AND BY USING THE PRODUCT YOU AGREE TO THESE TERMS. IF THE PRODUCT IS BEING USED BY

AN ENTITY, THE INDIVIDUAL INDICATING AGREEMENT TO THESE TERMS BY USING THE PRODUCT REPRESENTS AND

WARRANTS THAT (A) SUCH INDIVIDUAL IS DULY AUTHORIZED TO ACCEPT THE WARRANTY ON BEHALF OF THE ENTITY

AND TO BIND THE ENTITY TO THE TERMS OF THIS WARRANTY; (B) THE ENTITY HAS THE FULL POWER, CORPORATE OR

OTHERWISE, TO ENTER INTO THE WARRANTY AND PERFORM ITS OBLIGATIONS UNDER THE WARRANTY AND; (C) THE

WARRANTY AND THE PERFORMANCE OF THE ENTITY'S OBLIGATIONS UNDER THE WARRANTY DO NOT VIOLATE ANY

THIRD-PARTY AGREEMENT TO WHICH THE ENTITY IS A PARTY. No change or modification of the Warranty will be valid

unless it is in writing and is signed by WatchGuard.

Hardware Guide 15

Legal and Regulatory Information

Declaration of Conformity

16 WatchGuard Firebox M200 & M300

Legal and Regulatory Information

CE Notice

The CE symbol on your WatchGuard Technologies equipment indicates that it is in compliance

with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of

the European Union (EU).

FCC Certification

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one of the following measures:

 Reorient or relocate the device.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

 Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate this equipment.

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired

operation.

Industry Canada

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. CAN ICES-3(B)/NMB-3(B)

Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de

licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de

brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage

susceptible de provoquer un fonctionnement indésirable.

Hardware Guide 17

Legal and Regulatory Information

Japan VCCI Notice (Class A ITE)

これは VCCI 評議会の基準に基づくクラス A 製品です。本製品がラジオやテレビ受信機の近

くで使用されている場合は、電波障害を引き起こすことがあります。インストールして、

取扱説明書に従って機器を使用しています。

Taiwan Class A Notice

警告使用者：這是 A 類產品，應使用並正確安裝。本產品可能會造成無線電干擾，在這種情

況下，用戶可能需要採取適當的措施。警示本電池如果更換不正確會有爆炸的危險，請勿自

行更換電池

Mexico Notice

La operación de este equipo está sujeta a las siguientes dos condiciones:

1. es posible que este equipo o dispositivo no cause interferencia perjudicial

2. este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su

propia operación no deseada.

Korea Notice

사용자안내문

기 종 별 사 용 자 안 내 문

A 급 기기

( 업무용 방송통신기자재 )

이 기기는 업무용 (A 급 )

전자파적합기기로서 판매자 또는

사용자는 이 점을 주의하시기

바라며 , 가정외의 지역에서

사용하는 것을 목적으로

합니다 .

목적으로 합니다

18 WatchGuard Firebox M200 & M300

Legal and Regulatory Information

WEEE Statement

WEEE is a general set of requirements dictated in the EU Directive 2002/96/EC. This Directive mandated that

member EU countries enact regulations governing the Waste of Electrical and Electronic Equipment (WEEE).

The Directive, and its individual transpositions into specific country laws and legislation, is aimed at the

reduction of WEEE through reuse, recovery, and recycling of WEEE.

WatchGuard is working in partnership with our European Union (EU) distribution partners to ensure that our

products are in compliance with the WEEE statutes, and that the recovery of our product per the specific EU

country legislative requirements is seamless for our product’s end users. If you have a WatchGuard product

that is at its end of life and needs to be disposed of, please contact WatchGuard Customer Care Department at:

U.S. Customers: 877.232.3531

International Customers: +1.206.613.0456

WatchGuard is reasonably confident that our products do not contain any substances or hazardous materials

presently banned by any legislation, and do not present a risk due to hazardous materials. WEEE recovery

professionals should also note that these products do not have any materials that are of particular high value

in their individual form.

RoHS Statement

The member states of the European Union approved directive 2002/95/EC, Restrictions of Hazardous

Substances (“RoHS directive”‘) that became valid on July 1, 2006. It states that all new electrical and electronic

equipment put on the market within the member states must not contain certain hazardous materials. This

WatchGuard device complies with the European Union’s R0HS directive 2002/95/EC and similar regulations

that may be adopted by other countries for European Sales.

REACH Certificate of Compliance

The EU chemicals policy REACH (Registration, Evaluation, Authorization and restriction of Chemicals) came

into effect on June 1st 2007. REACH is Europe's new chemicals legislation, which is applicable in all 27 EU

Member States as well as the EFTA European Economic Area (EEA). REACH creates a new system for gathering

information, assessing risks to human health and the environment, and authorizing or restricting the

marketing and use of chemicals produced or supplied in the EEA. REACH has an impact on EEA producers and

importers of finished products and users of chemicals in the course of industrial or professional activities.

WatchGuard supports the overall REACH objective of improving the protection of human health and the

environment and will meet all applicable REACH requirements. WatchGuard is strongly committed to working

with our customers and supply chain to define and implement the REACH requirements and ensure a smooth

transition to compliance.

La page charge ...

Watchguard Firebox M200/M300 Hardware Guide

Marque: Watchguard

Modèle: Firebox M200/M300

Taper: Hardware Guide

Télécharger le PDF

rapport

dans d''autres langues

English: Watchguard Firebox M200/M300

Watchguard Firebox M200/M300 Hardware Guide

Watchguard Firebox M200/M300 Hardware Guide

dans d''autres langues

Documents connexes

Autres documents