CONCORD Eye-Q Go 2000 Manuel utilisateur

1

CONGRATULATIONS

Congratulations on the purchase of your new

camera. Your camera has been carefully engineered

and manufactured to give you dependable

operation. Read this manual before operating the

camera to become more familiar with it.

This manual has been written and formatted with

depth and detail so that you can easily follow the

instructions to maximize the features of your

camera.

ENGLISH

GO 2000-E (511682-00) 3/10/02 2:30 pm Page 1

2

Table of Contents

Important Information......................................................................................4

Precautions ......................................................................................................5

Camera Features ..............................................................................................6

System Requirements ......................................................................................7

1. The Camera

Overview of your Concord Eye-Q Go 2000......................................................8

Loading the Battery ........................................................................................9

Turning the Camera On and Off ....................................................................10

LCD Menu Screens ..........................................................................................11

LCD Status Messages......................................................................................15

Turning the LCD On and Off ..........................................................................16

Camera Ready LED Status ..............................................................................16

Camera Memory..............................................................................................17

Slide switch ....................................................................................................19

2. Camera Mode

Taking Images ................................................................................................20

Main Menu ....................................................................................................20

Mode ..........................................................................................................21

Video Clips ............................................................................................21

Self-timer................................................................................................22

Size............................................................................................................23

Quality ......................................................................................................24

Flash ..........................................................................................................25

EV ..............................................................................................................26

WB (White Balance) ..................................................................................27

Scene ........................................................................................................28

Brightness ................................................................................................29

Setup ........................................................................................................30

Digital Zoom ..................................................................................................34

GO 2000-E (511682-00) 3/10/02 2:30 pm Page 2

3

3. Review Mode

Enlargement ..................................................................................................35

Viewing Video Clips ......................................................................................35

Main Menu ....................................................................................................36

Delete ........................................................................................................36

Thumbnail..................................................................................................38

4. Software Installation

Installing the Camera Drivers and ArcSoft Applications ................................39

5. Transferring Photos to the Computer

Connecting the Camera to the Computer......................................................40

TWAIN/WDM Drivers (PC) ..........................................................................41

Mass Storage Mode (DSC)........................................................................42

Unplugging the camera from the computer ............................................43

ArcSoft PhotoImpression (PC) ..................................................................44

6. Other Features

ArcSoft VideoImpression (PC) ........................................................................45

Web Camera ..................................................................................................46

TV Mode ........................................................................................................47

7. Camera Maintenance

Cleaning the camera ......................................................................................50

8. Tips and Troubleshooting ..............................................................................51

9. Camera Specifications ....................................................................................55

GO 2000-E (511682-00) 3/10/02 2:30 pm Page 3

4

IMPORTANT INFORMATION

FCC INFORMATION

FCC WARNING: This equipment meets the limits for a Class B digital device,

pursuant to Part 15 of FCC rules. Only the cable supplied with the camera

should be used. Operation with other cables is likely to result in interference to

radio and TV reception and could void the user’s authorization to operate this

equipment. This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

• This device may not cause harmful interference.

• This device must accept any interference received, including interference

that may cause undesired operation.

Tested To Comply

With FCC Standards

for HOME OR OFFICE USE

Changes or modifications not expressly approved by the manufacturer may void

the user’s authority to operate this equipment.

USER INFORMATION

NOTE: This equipment has been tested and found to comply with the limits for

a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment on and off, the

user is encouraged to try to correct the interference by one or more of the

following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

GO 2000-E (511682-00) 3/10/02 2:30 pm Page 4

5

VCCI INFORMATION

This is a Class B product, to be used in a domestic environment, based on the

Technical Requirement of the Voluntary Control Council for Interference (VCCI)

from Information Technology Equipment. If this is used near a radio or

television receiver in a domestic environment, it may cause radio interference.

Please install and use the equipment according to this instruction manual.

PRECAUTIONS

Be sure to observe the following precautions when using the camera:

•Do not open the case of the camera or attempt your own repairs. Always

leave this service to authorized repair facilities.

•Keep the camera away from water and other liquids, and never let it get

wet. Never use outdoors when it is raining or snowing.

•Should foreign matter or water get into the unit, immediately turn the

power off and contact your local authorized service center.

•Physical damage and malfunction of this unit can cause the image data

stored in its memory to be deleted. Be sure to always keep backup copies

of data by transferring them to a personal computer.

•Under the environment with electrostatic discharge, the camera may

malfunction and require the user to reset the camera.

•Shielded cables must be used with this unit to ensure compliance with the

Class B FCC limits.

•Do not leave the camera in places subject to extremely high temperatures,

such as in a closed vehicle or in direct sunlight.

•Remove the battery when camera is not used for long periods of time.

•Use a 3V CR123 lithium battery only.

•Dispose of the battery in a manner that complies with applicable laws.

•Do not place the camera in unstable locations where the camera may fall

and be damaged.

•Do not press on the lens.

•Do not unplug the camera from the TV or computer while the camera is in

operation; otherwise, the memory may be corrupted.

•Do not turn the power off or open the battery compartment when the LED

is blinking or lit up; otherwise, the image may not be stored.

GO 2000-E (511682-00) 3/10/02 2:30 pm Page 5

6

Camera Features

•Stores approximately 8 Fine, 15 Normal or 27 Economy (1600 x 1200

pixels) mode photos with 7MB internal memory

•Virtually unlimited storage using the removable MultiMediaCard (MMC)

or Secure Digital (SD). (MMC/SD memory cards are sold separately).

• 1.6" Color LCD

• USB connection and cable

• TV connection (NTSC and PAL)

•Built-in automatic flash

•Focus free from 4 feet (1.2 meters) to infinity

• 1600 x 1200 pixel output (2.0 Megapixels)

• TV On Screen Display (OSD) menu

•Up to 4X Digital Zoom

•Slide switch with Macro (Close-up photography), Indoor (Auto Flash)

and Distant (No Flash) modes

•EV Compensation

•Preset Scene Selection

•Video Clip Mode

•Web Camera (Windows only)

•Mass Storage Driver

•Self-timer

•Tripod socket

•Multi-language support

GO 2000-E (511682-00) 3/10/02 2:30 pm Page 6

7

System Requirements

PC:

•Microsoft Windows 98SE/ME/2000 and XP

• IBM PC/AT or compatible, 200 Mhz or higher

•Minimum 32MB RAM (64MB recommended)

• USB Port

• 640 x 480 monitor, minimum 16 bit color (1024 x 768 24 bit color

recommended)

• 175MB free hard disk space

• 56K or faster modem, ISDN or LAN connection (for the Web Camera

feature only)

• CD-ROM drive

Macintosh:

•Mac OS 9 or higher

•Macintosh Power PC or higher, Minimum 64MB of RAM

• USB Port

• 100MB of available Hard Disk Space

GO 2000-E (511682-00) 3/10/02 2:30 pm Page 7

8

1. The Camera

Overview of Your Concord Eye-Q Go 2000

FRONT/TOP

1. Shutter Button

2. Rotary Switch

3. Neck/Wrist Strap Mount

4. Viewfinder

5. Flash Sensor

6. Flash

7. Self-timer LED

8. Lens

9. Slide Switch

10. Camera Ready LED

11. LCD

12. USB/TV Out Ports

13. Tripod Socket

14. Viewfinder

15. Navigation Button

16. Power Button

17. LCD On/Off Button

18. OK Button

19. Menu Button

20. Battery Door

BACK/BOTTOM

1

2

3

4

6

5

7

8

9

10

12

11

13

14

15

16

17

18

19

20

GO 2000-E (511682-00) 3/10/02 2:30 pm Page 8

9

Loading the Battery

The camera uses one 3V CR123 lithium battery.

Loading the Battery:

1. Locate the battery door on the bottom of the

camera.

2. Slide the battery door outwards, as indicated by

the arrow and lift the battery door to open.

(fig.1.1)

3. Insert the 3V CR123 lithium battery with the

positive terminal (+) toward the inside of the

battery compartment.

4. Close the battery door, press down on it and slide

it towards the center of the camera until it snaps

into place.

Note: Remove the batteries from the Concord Eye-Q Go 2000 if the

camera will not be used for an extended period of time to prevent

corrosion or battery leaks.

Checking the Battery

The camera has a battery indicator that shows the current battery level.

FULL

Batteries are full

and ready to use.

LOW

Batteries are low

and need to be

replaced soon.

fig.1.1

fig.1.2

GO 2000-E (511682-00) 3/10/02 2:30 pm Page 9

10

Turning the Camera on and off

To turn the camera on and off:

1. Press the On/Off button for a few seconds.

The camera will beep when it is turned on.

2. To turn the camera off, press the On/Off button

for a few seconds.

Note: Please peel off the thin protective plastic film on the LCD before

use.

fig.1.3

fig.1.4

GO 2000-E (511682-00) 3/10/02 2:30 pm Page 10

11

LCD Menu Screens

Mode

Size

Quality

Flash

MAIN MENU

M

Video Clip

Self-timer

Main Menu

MODE

1600 x 1200

1280 x 960

640 x 480

OK MENU

IMAGE SIZE

Fine

Normal

Economy

OK MENU

QUALITY

Auto

Flash

Flash Off

OK MENU

FLASH

A

Main Menu

OK MENU

IMAGE SIZE

Main Menu

OK MENU

QUALITY

Main Menu

OK MENU

FLASH

GO 2000-E (511682-00) 3/10/02 2:30 pm Page 11

12

LCD Menu Screens

AWB

Sunny

Fluorescent

OK MENU

WB

Tungsten

Main Menu

OK MENU

WB

–

EXPOSURE VALUE +

–

Brightness +

EV

WB

Scene

Brightness

MAIN MENU

+

WB

S

–

O

ff

O

ff

SCENE

OK MENU

GO 2000-E (511682-00) 3/10/02 2:30 pm Page 12

13

LCD Menu Screens

F

Language

Default

Format

Main Menu

SETUP

Format

Time-out 60S

Driver DSC

TV PAL

PlayLogo O ff

SETUP

Language

Español

Deutsch

Italiano

OK MENU

Language

Setup

Exit

MAIN MENU

PC

DSC

NTSC

PAL

15S

30S

60S

90S

None

English

Français

OK MENU

This operation will

delete all images

No

Yes

GO 2000-E (511682-00) 3/10/02 2:30 pm Page 13

14

Delete

Thumbnail

Brightness

Exit

MAIN MENU

Delete One

Delete All

Main Menu

DELETE

THIS FILE?

No

Yes

DELETE

ALL FILES?

No

Yes

–

Brightness +

LCD Menu Screens

GO 2000-E (511682-00) 3/10/02 2:30 pm Page 14

15

LCD Status Messages

Messages on the LCD indicate if the memory is full or if there is a

problem with the memory.

1. MEMORY CARD IS FULL:

The memory card is full.

2. INTERNAL MEMORY IS FULL:

The internal memory is full.

3. ERROR:

The camera’s internal memory or the

MMC/SD may be corrupted. Please format

the memory. (P.33)

MEMORY CARD FULL!

INTERNAL MEMORY FULL

ERROR!

GO 2000-E (511682-00) 3/10/02 2:30 pm Page 15

16

Turning the LCD On and Off

By default, the LCD automatically turns on

when the camera is powered on. Press to

turn the LCD on or off.

Using the Display ON/OFF Button:

1. Press once to turn the LCD icons off.

2. Press again to turn the LCD off.

3. Press to turn the LCD on.

Camera Ready LED Status

When the Camera Ready LED is:

1. Steady

The camera is in capture mode. Please hold the

camera steady during this time; otherwise, the image

may come out blurry. (fig.1.5)

2. Blinking

The flash is recharging or the camera is in storage mode. You may move

the camera in this mode. (fig.1.5)

Note: Do not open the battery door or turn the power off while the

Camera Ready LED is steady or blinking; otherwise, the images or

video clips in the camera may be damaged.

A

005/080

AWB

1600

A

fig.1.5

GO 2000-E (511682-00) 3/10/02 2:30 pm Page 16

17

Camera Memory

The Concord Eye-Q Go 2000 can store files in one of two ways using either

the camera’s 7MB internal memory or the removable MMC/SD. Memory

cards are sold separately and can be purchased from major electronic or

computer retailers.

When the MMC/SD is inserted, the images and video clips stored in the

internal memory will be transferred automatically onto the memory card.

LCDDefault Memory

MMC/SD

No Internal Memory (7MB)

Note: If a MMC/SD with insufficient memory is inserted, there will only

be a partial transfer and the memory card will be filled. Please insert

a memory card with sufficient memory, or delete images. Please refer

to the Deleting Files section for instruction. (P. 36) The files that were

not transferred will remain in the internal memory.

When the camera’s internal memory or the MMC/SD is full, you will need

to delete images to continue to take pictures, or insert a new MMC/SD

memory card. Please refer to the Deleting Photos section for instructions.

Note: There may be available storage space by using a lower photo

quality setting. Refer to the QUALITY section to select a lower quality

setting on P. 24.

GO 2000-E (511682-00) 3/10/02 2:30 pm Page 17

18

Using the MultiMediaCard or the Secure Digital Memory Card

Inserting the memory card:

1. Locate the battery cover on the bottom of the

camera.

2. Slide the battery door away from the camera

body and lift the battery door to open.

3. Insert the MMC or SD memory card as indicated

by the arrow. (fig.1.6)

4. Close the battery door. Press down on it and

slide it towards the center of the camera until it snaps into place.

Note: Please use MMC/SD memory cards with 16 MB of storage or

higher.

Note: If the internal memory or the MMC/SD is corrupted, the LCD will

display Error! The memory needs to be formatted. Please format all

files to continue. (P. 33)

Note: MMC/SD memory cards are sold separately and can be

purchased from major electronic or computer retailers. The cost will

vary depending on the size of the memory card.

fig.1.6

GO 2000-E (511682-00) 3/10/02 2:30 pm Page 18

19

SLIDE SWITCH

The camera has a Slide Switch that has 3 image taking modes:

macro ( ), portrait ( ) and distant ( ). The current flash setting is

displayed in the upper left corner of the LCD.

Slide Switch Flash Status Conditions Distance from

Position subject

Macro ( ) Auto Flash ( ) Use this option to 2.2ft. (0.65m) to

take close-up 4.7ft. (1.4m)

photography.

Portrait ( ) Auto Flash ( ) Use this option in 4.7ft. (1.4m) to

variable lighting 10.8ft. (3.2m)

conditions. The

camera will

automatically detect

when the flash is

needed.

Distant ( ) No Flash ( ) Use this option in 4.7ft. (1.4m) to

outdoor or bright infinity

light conditions.

Using the slide switch:

1. Position the Slide switch towards the macro ( ),

portrait ( ) or distant ( ) icon until the switch

clicks into place. (fig.2.7)

2. To ensure accurate focus, refer to the chart above to

make sure that the subject is within the distance

range in the mode that you selected.

Note: The default flash mode is set by the Slide Switch. To manually

override the slide switch flash mode, the setting must be changed on the

Flash menu on the LCD. Please refer to p. 25 for further information.

A

fig.2.7

GO 2000-E (511682-00) 3/10/02 2:30 pm Page 19

La page charge ...

CONCORD Eye-Q Go 2000 Manuel utilisateur

CONCORD Eye-Q Go 2000 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents