Schumacher SL1391U Lithium Ion Tactical Jump Starter Light SL1398U Lithium Ion Tactical Jump Starter Light SL1399U Lithium Ion Tactical Jump Starter Light Le manuel du propriétaire

Taper
Le manuel du propriétaire
0099002029-00
MODELS
SL1391U
SL1398U
SL1399U
Lithium Ion Tactical
Jump Starter Light
OWNER’S MANUAL
English ................... 02
Dansk .......................17
Deutsch .................. 28
Español ...................41
Français ................. 53
Italiano .................... 65
Nederlands ............ 77
Português .............. 89
Svenska ................ 101
SL1398U
• 2 •
ENGLISH Original instructions
Models: SL1391U, SL1398U, SL1399U
Lithium Ion Tactical Jump Starter Light
OWNERS MANUAL
PLEASE SAVE THIS OWNER’S MANUAL AND READ BEFORE EACH
USE. This manual will explain how to use the unit safely and effectively.
Please read and follow these instructions and precautions carefully.
1. IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS.
WARNING! RISK OF ELECTRIC SHOCK OR FIRE.
1.1 SAVE THESE INSTRUCTIONS – This manual contains important
safety and operating instructions.
1.2 Read, understand and follow all instructions, cautions and warnings
listed in this manual. Failure to follow all instructions and abide by all
cautions and warnings could result in personal injury, injury to others
and property damage.
1.3 This jump starter is not intended for use by children. Persons with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, must be given supervision or instruction concerning the
use of the product by a person responsible for their safety.
1.4 Children should be supervised to ensure they do not play with the unit.
1.5 DO NOT put ngers or hands into any of the unit’s outlets.
1.6 DO NOT expose the unit to rain or snow.
1.7 The appliance is to be used only with the provided power supply.
1.8 Use only recommended attachments. Use of an attachment not
recommended or sold by Schumacher
®
Electric Corporation may result
in a risk of re, electric shock or injury to persons or damage to property.
1.9 DO NOT operate the unit with damaged cables or clamps.
1.10 DO NOT operate the unit if it has received a sharp blow, been dropped
or otherwise damaged in any way; take it to a qualied service person.
WARNING! RISK OF EXPLOSIVE GASES.
1.11 WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS
DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES
DURING NORMAL OPERATION. IT IS IMPORTANT THAT YOU
FOLLOW THESE INSTRUCTIONS EACH TIME YOU USE THE UNIT.
1.12 To reduce the risk of a battery explosion, follow these instructions and
those published by the battery manufacturer and the manufacturer of
any equipment you intend to use in the vicinity of the battery. Review
the cautionary markings on these products and on the engine.
1.13 DO NOT set the unit on ammable materials, such as carpeting,
upholstery, paper, cardboard, etc.
1.14 NEVER place the unit directly above battery being jumped.
1.15 DO NOT use the unit to jump start a vehicle while charging the
internal battery.
• 3 •
1.16 IMPORTANT! CHARGE THE UNIT IMMEDIATELY AFTER
PURCHASE, AFTER EACH USE, AND AT LEAST EVERY 3 MONTHS.
1.17 DO NOT turn on the unit while it is being charged.
1.18 DO NOT handle or move the unit while it is being charged.
1.19 DO NOT look directly into the light or shine the light directly into the
eyes of any person or animal.
1.20 DO NOT leave the battery in a discharged state.
1.21 DO NOT use the unit with a charger which has a damaged cord or
plug; replace the cord or plug immediately.
2. PERSONAL SAFETY PRECAUTIONS
WARNING! RISK OF EXPLOSIVE GASES.
A SPARK NEAR THE BATTERY MAY CAUSE A BATTERY EXPLOSION.
TO REDUCE THE RISK OF A SPARK NEAR THE BATTERY:
2.1 NEVER smoke or allow a spark or ame in the vicinity of a battery or engine.
2.2 Remove personal metal items such as rings, bracelets, necklaces and
watches when working with a lead-acid battery. A lead-acid battery
can produce a short-circuit current high enough to weld a ring to
metal, causing a severe burn.
2.3 Be extra cautious, to reduce the risk of dropping a metal tool onto the
battery. It might spark or short-circuit the battery or other electrical
part that may cause an explosion.
2.4 Do not permit the internal battery of the unit to freeze. Never charge a
frozen battery.
2.5 To prevent sparking, NEVER allow clamps to touch together or
contact the same piece of metal.
2.6 Consider having someone nearby to come to your aid when you work
near a lead-acid battery.
2.7 Have plenty of fresh water, soap and baking soda nearby for use, in
case battery acid contacts your eyes, skin, or clothing.
2.8 Wear complete eye and body protection, including safety goggles
and protective clothing. Avoid touching your eyes while working near
the battery.
2.9 If battery acid contacts your skin or clothing, immediately wash
the area with soap and water. If acid enters your eye, immediately
ood the eye with cold running water for at least 10 minutes and get
medical attention right away.
2.10 If battery acid is accidentally swallowed, drink milk, the whites of eggs
or water. DO NOT induce vomiting. Seek medical attention immediately.
2.11 Neutralize any acid spills thoroughly with baking soda before attempting
to clean up.
WARNING! TO REDUCE THE RISK OF BURNS OR FIRE, FOLLOW
THESE SAFETY PRECAUTIONS:
2.12 DO NOT disassemble the unit; take it to a qualied service person
when service or repair is required. Incorrect reassembly may result in a
risk of re or electric shock.
• 4 •
2.13 DO NOT crush, puncture, short external contacts or dispose of in re
or water.
2.14 DO NOT expose to temperatures above 140°F (60°C) or below
-
4˚F (
-
20˚ C).
2.15 Recycle or dispose of the used battery as required by local regulations.
2.16 If the electrolyte in the cells gets on your skin, wash thoroughly with
soap and water. If it gets into your eyes, rinse thoroughly with cool
water and seek immediate medical attention.
2.17 This product contains a lithium ion battery. In case of re, you
may use water, a foam extinguisher, Halon, CO
2
, ABC dry chemical,
powdered graphite, copper powder or soda (sodium carbonate)
to extinguish the re. Once the re is extinguished, douse the
product with water, an aqueous-based extinguishing agent, or other
nonalcoholic liquids to cool the product and prevent the battery from
re-igniting. NEVER attempt to pick up or move a hot, smoking, or
burning product, as you may be injured.
3. PREPARING TO USE THE UNIT
WARNING! RISK OF CONTACT WITH BATTERY ACID.
BATTERY ACID IS A HIGHLY CORROSIVE SULFURIC ACID.
3.1 Make sure the area around the battery is well ventilated while the unit
is in use.
3.2 Clean the battery terminals before using the jump starter. During
cleaning, keep airborne corrosion from coming into contact with your
eyes, nose and mouth. Use baking soda and water to neutralize the
battery acid and help eliminate airborne corrosion. Do not touch your
eyes, nose or mouth.
3.3 Determine the voltage of the battery by referring to the vehicle
owner’s manual and make sure that the output voltage is 12V.
3.4 Make sure that the unit’s cable clamps make tight connections.
4. FOLLOW THESE STEPS WHEN CONNECTING TO A BATTERY
WARNING! A SPARK NEAR THE BATTERY MAY CAUSE A
BATTERY EXPLOSION. TO REDUCE THE RISK OF A SPARK
NEAR THE BATTERY:
4.1 Plug the clamps into the unit, and then attach the output cables to
the battery and chassis as indicated below. Never allow the output
clamps to touch each other.
4.2 Position the DC cables to reduce the risk of damage by the hood,
door and moving or hot engine parts. NOTE: If it is necessary to
close the hood during the jump starting process, ensure that the hood
does not touch the metal part of the battery clips or cut the insulation
of the cables.
4.3 Stay clear of fan blades, belts, pulleys and other parts that can cause injury.
4.4 Check the polarity of the battery posts. The POSITIVE (POS, P, +)
battery post usually has a larger diameter than the NEGATIVE
(NEG, N, -) post.
• 5 •
4.5 Determine which post of the battery is grounded (connected) to the
chassis. If the negative post is grounded to the chassis (as in most
vehicles), see step 4.6. If the positive post is grounded to the chassis,
see step 4.7.
4.6 For a negative-grounded vehicle, connect the POSITIVE (RED) clamp
from the jump starter to the POSITIVE (POS, P, +) ungrounded post
of the battery. Connect the NEGATIVE (BLACK) clamp to the vehicle
chassis or engine block away from the battery. Do not connect the
clamp to the carburetor, fuel lines or sheet-metal body parts. Connect
to a heavy gauge metal part of the frame or engine block.
4.7 For a positive-grounded vehicle, connect the NEGATIVE (BLACK)
clamp from the jump starter to the NEGATIVE (NEG, N, -) ungrounded
post of the battery. Connect the POSITIVE (RED) clamp to the vehicle
chassis or engine block away from the battery. Do not connect the
clamp to the carburetor, fuel lines or sheet-metal body parts. Connect
to a heavy gauge metal part of the frame or engine block.
4.8 When nished using the jump starter, remove the clamp from the
vehicle chassis and then remove the clamp from the battery terminal.
Disconnect the clamp cable from the unit.
5. SET UP INSTRUCTIONS
5.1 Remove any cord wraps and uncoil the charging cable.
6. FEATURES
Model SL1398U is shown.I
1. Flashlight
2. Power button
3. USB 2.1A output port
4. Battery level LED
5. Micro USB 5V, 2A input port
6. Jumper cable output socket
7. Smart cable/clamps
8. Micro-USB charging cable
Not shown:
9. String for tactical jump starter
10. Bag for clamps and Micro-USB
cable (SL1391U and SL1398U)
1 2 3 4
56
8
7
• 6 •
7. CHARGING THE UNIT
IMPORTANT! CHARGE THE UNIT IMMEDIATELY AFTER PURCHASE,
AFTER EACH USE, AND AT LEAST EVERY 3 MONTHS, OR WHEN
THE CHARGE LEVEL FALLS BELOW 50%, TO KEEP THE INTERNAL
BATTERY FULLY CHARGED AND PROLONG BATTERY LIFE.
Failure to do this will reduce the battery’s capacity and may void
the warranty.
7.1 CHECKING THE LEVEL OF THE INTERNAL BATTERY
Press the Power button to check the battery level of the unit.
The LEDs will indicate the battery level, as follows:
Red LED ashing: 5% power
Red LED lit: 50% power
Green LED lit: > 50% power
Charge the internal battery if the level is below 50%.
7.2 CHARGING THE INTERNAL BATTERY
NOTE: Use a 2A USB charger (not included), or a 2A USB charging
port to quickly recharge the jump starter. Using a charger with less
than 2A will increase charge time.
1. When charging the internal battery, work in a well ventilated area and do not
restrict the ventilation in any way.
2. Connect the micro USB end of the charging cable to the micro USB port
on the end of the unit. Insert the USB end of the cable into the USB port
on your charger.
3. Plug your charger into a live power source.
4. The LED will indicate the charge level, as follows:
Red LED ashing: 50% power
Green LED ashing: > 50% power
Green LED lit: 100% power
5. Charging may take 3.5-9.5 hours, depending on the battery level and
model type.
6. Recharge the unit after use, and at least every 3 months.
8. OPERATING INSTRUCTIONS
8.1 JUMP STARTING A VEHICLE ENGINE
NOTE: Use only the provided jump cable.
IMPORTANT: Do not use the jump starter while charging its internal battery.
IMPORTANT: Using the jump starter without a battery installed in the
vehicle will damage the vehicle’s electrical system.
NOTE: The internal battery must have a charge if at least 50% to
jump start a vehicle.
1. Turn the ignition OFF.
2. Lay the DC cables away from any fan blades, belts, pulleys and other
moving parts. Make sure all of the vehicle’s electrical devices are turned off.
3. Plug the battery clamp smart cable into the jump starter’s output socket.
The green LED on the smart cable should ash.
• 7 •
4. For a negative-grounded vehicle, connect the POSITIVE (RED) clamp
from the jump starter to the POSITIVE (POS, P, +) ungrounded post
of the battery. Connect the NEGATIVE (BLACK) clamp to the vehicle
chassis or engine block away from the battery. Do not connect the
clamp to the carburetor, fuel lines or sheet-metal body parts. Connect
to a heavy gauge metal part of the frame or engine block.
5. For a positive-grounded vehicle, connect the NEGATIVE (BLACK)
clamp from the jump starter to the NEGATIVE (NEG, N, -) ungrounded
post of the battery. Connect the POSITIVE (RED) clamp to the vehicle
chassis or engine block away from the battery. Do not connect the
clamp to the carburetor, fuel lines or sheet-metal body parts. Connect to
a heavy gauge metal part of the frame or engine block.
6. The smart cable will detect the voltage of the vehicle and jump starter,
and will make a clicking sound (SL1399U does not click). The green
LED on the smart cable should ash.
7. Turn the key to the ACC position.
8. When the green LED is solid, the unit is ready to jump start the vehicle.
NOTE: If the vehicle battery is extremely discharged, the initial current
draw from the jump starter may activate short circuit protection in the
smart cable. Disconnect and reconnect the smart cable to reset.
9. After a proper connection has been made, crank the engine. If the engine
does not start within 5-8 seconds, stop cranking and wait at least 2
minutes before attempting to start the vehicle again.
NOTE: If the car does not crank a second time, check the smart cable to
see if the green LED is lit. If an LED is ashing, refer to the information on
the back of the smart cable.
NOTE: Cold weather may affect the performance of the jump starter’s
lithium battery. If you hear only a click and the engine does not turn
over, try the following:
With the jump starter connected to the car battery and the green
LED illuminated on the smart cable, turn on all lights and electrical
accessories for one minute. This draws current from the jump starter
and warms the battery. Now try to crank the engine. If it does not turn
over, repeat the procedure. Extremely cold weather may require two or
three battery warmings before the engine will start.
IMPORTANT: DO NOT attempt to jump start your vehicle more
than three consecutive times. If the vehicle will not start after three
attempts, consult a service technician.
10. After the engine starts, disconnect the black clamp (-) and the red
clamp (+), in that order, and then unplug the battery clamp cable from
the jump starter socket.
11. Recharge the unit as soon as possible after each use.
• 8 •
8.2 USING THE FLASHLIGHT
1. Press and hold the Power button for 3 seconds to turn on the light.
2. Press lightly on the Power button to cycle through the following modes:
Steady glow
Flash in strobe mode
Flash for an SOS signal
OFF
3. When nished using the ashlight, press the Power button until the
light turns off.
4. Recharge the unit as soon as possible after each use.
8.3 CHARGING A MOBILE DEVICE
The USB port provides up to 2.1A at 5V DC.
1. Connect a mobile device cable to the USB port.
2. Charging should begin automatically.
3. Charging time will vary, based on the mobile device’s battery size.
4. When nished using the USB port, disconnect the charging cable from
your mobile device and then disconnect the charging cable from the unit.
5. Recharge the unit as soon as possible after each use.
9. MAINTENANCE INSTRUCTIONS
9.1 After use and before performing maintenance, unplug and disconnect the unit.
9.2 Use a dry cloth to wipe any dirt or oil from the smart cable, charging
cable and case.
9.3 Ensure that all of the unit’s components are in place and in good
working condition.
9.4 Servicing does not require opening the unit, as there are no user-
serviceable parts.
9.5 Any servicing should be performed by qualied service personnel.
10. STORAGE INSTRUCTIONS
10.1 Store inside, in a cool, dry place.
10.2 Take care to avoid/prevent damage to the smart cable, charging cable and
unit. Failure to do so could result in personal injury or property damage.
10.3 Charge the unit’s internal battery immediately after purchase, after
every use and every 3 months.
10.4 All batteries are affected by temperature. The ideal storage
temperature is at 70°F (21 ˚C). The internal battery will gradually self-
discharge (lose power) over time, especially in warm environments.
Leaving the battery in a discharged state may result in permanent
battery damage. To ensure satisfactory performance and avoid
permanent damage, charge the internal battery every 6 months.
• 9 •
11. TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
The unit does not
operate.
The battery is not
charged.
Recharge the battery to
full charge.
The unit will not
recharge.
No power at receptacle. Make sure the power
source is live.
The jump starter
turns on, but
won’t jump start
my vehicle.
The connections are poor.
The battery power is low.
The vehicle requires
more power than can
be supplied by the jump
starter.
Check connections.
Verify the charge level of the
jump starter is at least 50%.
Do not attempt to jump
start your vehicle more
than three consecutive
times. If the vehicle still
does not start, consult a
qualied service technician.
Smart Cable LED and Alarm Behavior
BEHAVIOR REASON
Green LED ashing Ready to connect the smart cable to
the jump starter, and then connect the
clamps to the vehicle.
Green LED solid
(with beep and clicking sound)
Detecting the voltage of the jump
starter and vehicle.
(SL1399U has only beep, no click.)
Green LED solid Ready to jump start the vehicle. After
jump start, disconnect the clamps.
Red LED lit; long buzzer alarm
(sounds like "di- - - - -")
Short circuit protection
Red LED lit; buzzer beeps
(sounds like "di-di-di-")
The connection is reversed
Red LED lit (no alarm) Voltage is too high or too low for
starting a vehicle.
NOTE: Disconnect and reconnect the smart cable to reset.
• 10 •
12. BEFORE RETURNING FOR REPAIRS (U.S./CANADA)
For information about troubleshooting,
contact customer service for assistance:
www.batterychargers.com or call 1-800-621-5485
For REPAIR OR RETURN, contact Customer Service at
1-800-621-5485. DO NOT SHIP UNIT until you receive a
RETURN MERCHANDISE AUTHORIZATION (RMA) number
from Customer Service at Schumacher Electric Corporation.
When returning an item, place the original package into a shipping
carton. If you received an emailed label from Schumacher, please
print the label and tape it to the carton. Only ship via insured
ground service with a tracking number. Return shipping
charges are the responsibility of the customer. We cannot accept
C.O.D. deliveries and are not responsible for lost or damaged
packages. Please do not place stickers or shipping labels on the
original manufacturer’s package. Please allow 2-3 days from date
we received the package for us to process your return. All return
shipping charges must be prepaid.
13. DISPOSAL INFORMATION
Do not dispose of this product with other household waste.
To prevent possible harm to the environment or human
health from uncontrolled waste disposal, and to promote
the sustainable reuse of material resources, recycle it
responsibly. To discard your used device, please use the
return and collection systems or contact the retailer where the product
was purchased, for environmentally-safe recycling.
14. SPECIFICATIONS
SL1391U
Battery type ................................................ Lithium Polymer, 37 Wh
Peak current ............................................................................. 800A
Starting current .........................................................................400A
Light .................................................................. CREE LED, 600 lm
Micro USB input .....................................................................5V, 2A
USB output .......................................................................... 5V, 2.1A
SL1398U
Battery type ............................................. Lithium Polymer, 55.5 Wh
Peak current ........................................................................... 1000A
Starting current .........................................................................500A
Light .................................................................. CREE LED, 600 lm
Micro USB input .....................................................................5V, 2A
USB output .......................................................................... 5V, 2.1A
• 11 •
SL1399U
Battery type ............................................. Lithium Polymer, 22.2 Wh
Peak current ............................................................................. 400A
Starting current .........................................................................200A
Light .................................................................... SMD LED, 600 lm
Micro USB input .....................................................................5V, 2A
USB output .......................................................................... 5V, 2.1A
15. REPLACEMENT PARTS
SL1391U
USB to Micro USB charging cable .................................3899003987Z
Smart cable/clamps ........................................................3899003986Z
Bag for accessories ........................................................5899000037Z
SL1398U
USB to Micro USB charging cable .................................3899003995Z
Smart cable/clamps ........................................................3899003985Z
Bag for accessories ........................................................5899000037Z
SL1399U
USB to Micro USB charging cable .................................3899003982Z
Smart cable/clamps ........................................................3899003999Z
16. LIMITED WARRANTY (U.S./CANADA)
SCHUMACHER ELECTRIC CORPORATION, 801 BUSINESS CENTER
DRIVE, MOUNT PROSPECT, IL 60056-2179, MAKES THIS LIMITED
WARRANTY TO THE ORIGINAL RETAIL PURCHASER OF THIS
PRODUCT. THIS LIMITED WARRANTY IS NOT TRANSFERABLE OR
ASSIGNABLE.
Schumacher Electric Corporation (the “Manufacturer”) warrants this
unit for one (1) year from the date of purchase at retail against
defective material or workmanship that may occur under normal
use and care. If your unit is not free from defective material or
workmanship, Manufacturer’s obligation under this warranty is solely
to repair or replace your product with a new or reconditioned unit at
the option of the Manufacturer. It is the obligation of the purchaser to
forward the unit, along with proof of purchase and mailing charges
prepaid to the Manufacturer or its authorized representatives in
order for repair or replacement to occur.
• 12 •
Manufacturer does not provide any warranty for any accessories
used with this product that are not manufactured by Schumacher
Electric Corporation and approved for use with this product. This
Limited Warranty is void if the product is misused, subjected to
careless handling, repaired, or modied by anyone other than
Manufacturer or if this unit is resold through an unauthorized retailer.
Manufacturer may void this Limited Warranty if a “warranty void if
removed” label is removed from the product.
Manufacturer makes no other warranties, including, but not limited to,
express, implied or statutory warranties, including without limitation,
any implied warranty of merchantability or implied warranty of tness
for a particular purpose. Further, Manufacturer shall not be liable for
any incidental, special or consequential damage claims incurred by
purchasers, users or others associated with this product, including,
but not limited to, lost prots, revenues, anticipated sales, business
opportunities, goodwill, business interruption and any other injury or
damage. Any and all such warranties, other than the limited warranty
included herein, are hereby expressly disclaimed and excluded.
Some states do not allow the exclusion or limitation of incidental or
consequential damages or length of implied warranty, so the above
limitations or exclusions may not apply to you. This warranty gives you
specic legal rights and it is possible you may have other rights which
vary from this warranty.
THIS LIMITED WARRANTY IS THE ONLY EXPRESS LIMITED WARRANTY
AND THE MANUFACTURER NEITHER ASSUMES OR AUTHORIZES
ANYONE TO ASSUME OR MAKE ANY OTHER OBLIGATION TOWARDS
THE PRODUCT OTHER THAN THIS WARRANTY.
• 13 •
WARRANTY CARD (U.S./CANADA)
SAVE ON POSTAGE! ACTIVATE YOUR WARRANTY ONLINE – THE QUICK AND
EASY WAY! Go to www.batterychargers.com to register your product online.
(No internet access? Send in the completed warranty card.)
1 YEAR LIMITED
WARRANTY PROGRAM
REGISTRATION
MODEL: _____________________ DESCRIPTION: ________________________
This is the only express limited warranty, and the manufacturer neither assumes
nor authorizes anyone to assume or make any other obligation. There is no other
warranty, other than what is described in the product owner’s manual.
The warranty card should be submitted within 30 days of purchase. The customer
must keep the ORIGINAL receipt because it will be required for any warranty claims.
This warranty is not transferable. Send warranty card only.
DO NOT SEND UNIT TO THIS ADDRESS FOR REPAIR.
Mail this card to: Schumacher Electric Corporation
801 Business Center Drive
Mount Prospect, IL 60056-2179
Name ______________________________________________________________
Street Address _______________________________________________________
City ________________________________State _________ Zip Code _________
Phone _____________________Email ___________________________________
Store Name Where Purchased ___________________ Date of Purchase _________
Store Location ____________________ UPC Number ________________________
Serial Number ______________________________________ (SEE PRODUCT)
For faster warranty activation, go to www.batterychargers.com to register your product online.
• 14 •
• 15 •
17. LIMITED WARRANTY (EUROPE/AUSTRALIA)
WARRANTY TERMS AND CONDITIONS
Schumacher Electric Corporation (the “Manufacturer”) or the resellers
authorized by the Manufacturer (the “Reseller”) warrant this unit
(the “Product”) for two (2) years (Europe) and one (1) year (Australia),
according to the following stipulations. Any and all warranties, other
than the warranty included herein, are hereby expressly disclaimed
and excluded to the fullest extent permissible under applicable law.
Legislation may imply warranties or conditions or impose obligations
on Manufacturer which cannot be excluded, restricted or modied in
relation to consumer goods.
Consumer End-User Warranty
Any claims under this warranty must be communicated to Reseller
within 2 months after discovery of the non-conformity.
Resellers/Professional End-User Warranty
The Manufacturer provides a limited warranty for hidden defects or non-
conformities. This warranty is subject to the following conditions:
a. The Manufacturer only warrants hidden defects in material or
workmanship present in their root cause at the moment of the
rst sale by the Manufacturer;
b. Manufacturer’s obligation under this warranty is limited to
repairing or replacing the Product with a new or reconditioned
unit at the sole option of the Manufacturer;
c. Manufacturer does not have any warranty obligations if the
alleged defects were caused by abnormal usage, fair wear
and tear, unauthorized use of the Product or use of the
Product differing from the description in the applicable manual
or other specications given by the Manufacturer, insufcient
care, repairs carried out by persons or entities or with
parts not approved by Manufacturer, poor care, accidents,
unauthorized changes or modications, incorrect transport,
storage or treatment of the Product;
d. In order to exercise this right, the Product must be returned
complete and in its original state and packaging, with
mail costs prepaid, along with proof of purchase to the
Manufacturer or its authorized representatives in order for
repair or replacement to occur.
Common Warranty Provisions
The warranty mentioned above only applies to the rst professional
or consumer user having legally acquired the Product from the
Manufacturer or a Reseller. No warranty is extended towards clients,
agents or representatives of those buyers.
• 16 •
The Product is sold under the specications, for the use and purpose
in accordance with the provisions of this manual, with express
exclusion and disclaimer of warranty of any other specications,
uses and purposes.
Authorized Resellers are prohibited from making any statements
or providing any warranty in excess of the above warranties Non-
authorized resellers may only sell the product under the condition
that they assume all warranty obligations with the total exclusion of
any warranty provided by the Manufacturer.
Manufacturer does not provide any warranty for any accessories
used with the Product that are not manufactured by Schumacher
Electric Corporation.
This warranty does not exclude or diminish any claims the
Manufacturer may have against the distributors of The Product.
THE MANUFACTURER NEITHER ASSUMES NOR AUTHORIZES
ANYONE TO ASSUME OR MAKE ANY OTHER OBLIGATION
TOWARDS THE PRODUCT OTHER THAN THIS WARRANTY.
Warranty, Repair Service and Distribution Centers:
For customers outside of the U.S.A.,
contact your local distributor.
North and South America:
Hoopeston in U.S.A.
1-800-621-5485
Europe:
Schumacher Europe SPRL
Rue de la Baronnerie 3
B-4920 Harzé-Belgium
+32 4 388 20 17
info@ceteor.com
Australia/New Zealand:
Schumacher Asia Pacic Pty. Ltd.
A.B.N. 43613943525
Unit 53B – 28 Burnside Road, Ormeau
Queensland, Australia, 4208
07 3807 6510
Schumacher
®
and the Schumacher logo
are registered
trademarks of Schumacher Electric Corporation.
• 17 •
DANSK Oversættelse af den originale brugsanvisning
Modeller: SL1391U, SL1398U, SL1399U
Lithium-ion taktisk lampe på starthjælpsenhed
BRUGERVEJLEDNING
GEM DENNE BRUGERVEJLEDNING, OG LÆS DEN FØR HVER BRUG.
Denne vejledning forklarer, hvordan du bruger enheden sikkert og effektivt.
Læs og følg disse instruktioner og forholdsregler omhyggeligt.
1. VIGTIGE SIKKERHEDSINSTRUKTIONER
GEM DISSE INSTRUKTIONER.
ADVARSEL! RISIKO FOR ELEKTRISK STØD ELLER BRAND.
1.1 GEM DISSE INSTRUKTIONER – Denne vejledning indeholder vigtige
sikkerheds- og betjeningsinstruktioner.
1.2 Læs, forstå og følg alle instruktioner, forsigtighedsregler og advarsler
i denne vejledning. Manglende overholdelse af alle instruktioner,
forholdsregler og advarsler kan medføre personskade, skade på
andre og materielle skader.
1.3 Starthjælpsenheden må ikke anvendes af børn. Personer med nedsat
fysisk, sensorisk eller psykisk funktionsevne, eller mangel på erfaring
og viden, skal vejledes eller instrueres i brugen af produktet af en
person, der er ansvarlig for deres sikkerhed.
1.4 Børn skal holdes under opsyn for at sikre, at de ikke leger med enheden.
1.5 STIK IKKE ngre eller hænder ind i nogen af stikkene på enheden.
1.6 UDSÆT IKKE enheden for regn eller sne.
1.7 Denne anordning må kun bruges med den medfølgende strømforsyning.
1.8 Brug kun anbefalet tilbehør. Anvendelse af tilbehør, som ikke er
anbefalet eller solgt af Schumacher
®
Electric Corporation, kan medføre
risiko for brand, elektrisk stød eller skade på personer eller ejendom.
1.9 Enheden MÅ IKKE bruges, hvis kabler eller klemmer er beskadiget.
1.10 ANVEND IKKE enheden, hvis den har fået et kraftigt slag, er blevet
tabt eller på anden måde beskadiget. Få den tilset af en kvaliceret
servicetekniker.
ADVARSEL! RISIKO FOR EKSPLOSIVE GASSER.
1.11 ARBEJDE I NÆRHEDEN AF ET BLYBATTERI ER FARLIGT.
BATTERIER UDVIKLER EKSPLOSIVE GASSER UNDER NORMAL
DRIFT. DET ER VIGTIGT, AT DU FØLGER DISSE INSTRUKTIONER
HVER GANG DU BRUGER ENHEDEN.
1.12 For at reducere risikoen for en batterieksplosion skal du følge
disse instruktioner og instruktionerne fra batteriets producent og
producenten af det udstyr, du har til hensigt at bruge i nærheden af
batteriet. Læs advarselsmærkerne på disse produkter og på motoren.
• 18 •
1.13 PLACÉR IKKE enheden på brændbare materialer, såsom tæpper,
polstring, papir, pap osv.
1.14 Placér ALDRIG enheden direkte over det batteri, der gives starthjælp til.
1.15 BRUG IKKE enheden til at give starthjælp til et køretøj, mens det
interne batteri oplades.
1.16 VIGTIGT! OPLAD ENHEDEN STRAKS EFTER DEN ER KØBT,
EFTER HVER BRUG OG MINDST HVER 3. MÅNED.
1.17 Tænd IKKE enheden under opladning.
1.18 Håndtér eller yt IKKE enheden, mens den er ved at blive opladet.
1.19 Pas på IKKE at kigge direkte ind i lysdioderne eller rette lyset fra
arbejdslampen mod øjnene på personer eller dyr.
1.20 UNDLAD at opbevare batteriet i aadet tilstand.
1.21 Enheden må IKKE bruges med en oplader, hvor kablet eller stikket er
beskadiget. Udskift straks ledningen eller stikket.
2. PERSONLIGE SIKKERHEDSFORANSTALTNINGER
ADVARSEL! RISIKO FOR EKSPLOSIVE GASSER.
EN GNIST I NÆRHEDEN AF BATTERIET KAN FORÅRSAGE
BATTERIEKSPLOSION. SÅDAN REDUCERES RISIKOEN FOR EN
GNIST I NÆRHEDEN AF BATTERIET:
2.1 Man må ALDRIG ryge eller tillade en gnist eller amme i nærheden af et
batteri eller en motor.
2.2 Fjern personlige metalgenstande såsom ringe, armbånd, halskæder
og ure, når du arbejder med et blybatteri. En blybatteri kan frembringe
en kortslutningsstrøm, som er høj nok til at svejse en ring fast til metal,
hvilket medfører en alvorlig forbrænding.
2.3 Vær ekstra forsigtig for at mindske risikoen for at tabe et metalværktøj på
batteriet. Det kan danne en gnist eller kortslutte batteriet eller en anden
elektrisk del, hvilket kan forårsage en eksplosion.
2.4 Man må ikke tillade, at det interne batteri i enheden fryser. Oplad aldrig
et frosset batteri.
2.5 For at forhindre gnistdannelse må klemmerne ALDRIG røre hinanden
eller få kontakt med det samme stykke metal.
2.6 Overvej at få nogen i nærheden til at hjælpe dig, når du arbejder i
nærheden af et blybatteri.
2.7 Hav masser af frisk vand, sæbe og tvekulsurt natron i nærheden i tilfælde
af, at batterisyre kommer i kontakt med hud, tøj eller øjne.
2.8 Bær komplet øjen- og kropsbeskyttelse, herunder beskyttelsesbriller og
beskyttelsestøj. Undgå at røre dine øjne, mens du arbejder i nærheden
af batteriet.
2.9 Hvis batterisyren kommer i kontakt med huden eller tøjet, skal du straks
vaske området med sæbe og vand. Hvis syren kommer ind i dit øje, skal
du straks skylle øjnene med koldt vand i mindst 10 minutter og søge
lægehjælp med det samme.
• 19 •
2.10 Hvis batterisyre ved et uheld sluges, skal man drikke mælk, æggehvider
eller vand. Forsøg IKKE at fremkalde opkastning. Søg lægehjælp
omgående.
2.11 Neutralisér eventuelle syreudslip grundigt med tvekulsurt natron, inden
du forsøger at rydde op.
ADVARSEL!
FØLG DISSE SIKKERHEDSFORANSTALTNINGER FOR AT
REDUCERE RISIKOEN FOR FORBRÆNDINGER ELLER BRAND:
2.12 Skil IKKE enheden ad. Tag den til en kvaliceret servicetekniker,
når service eller reparation er påkrævet. Fejlagtig gensamling kan
medføre risiko for brand eller elektrisk stød.
2.13 Udvendige kontakter eller stik må IKKE knuses, perforeres,
kortsluttes eller bortskaffes i vand eller åben ild.
2.14 IKKE udsættes for temperaturer på over 60 °C eller under -20 ˚C.
2.15 Genbrug eller bortskaf det brugte batteri som krævet i henhold til
lokale bestemmelser.
2.16 Hvis der kommer batterivæske på huden, vaskes grundigt med vand
og sæbe. Hvis der kommer batterivæske i øjnene, skal der skylles
med rindende koldt vand og søges lægehjælp med det samme.
2.17 Dette produkt indeholder et litium-ion-batteri. Tilfælde af
brand kan du bruge vand, en skumslukker, halon, CO
2
, en ABC-
brandslukker, gratpulver, kobberpulver eller soda (natriumkarbonat)
til at slukke ilden. Når branden er slukket, skal du oversprøjte
produktet med vand, et vandbaseret brandslukningsmiddel eller
alkoholfrie væsker for at afkøle produktet og forhindre batteriet i
at genantændes Forsøg ALDRIG at gribe fat i eller ytte et varmt,
rygende eller brændende produkt, da du kan komme til skade.
3. KLARGØRING TIL AT ANVENDE ENHEDEN
ADVARSEL! RISIKO FOR KONTAKT MED BATTERISYRE.
BATTERISYRE ER EN STÆRKT ÆTSENDE SVOVLSYRE.
3.1 Sørg for, at området omkring batteriet er godt ventileret, mens
enheden bliver brugt.
3.2 Rengør batteripolerne, før du bruger starthjælpsenheden. Under
rengøring skal man holde luftbårne ætsende midler fra at komme i
kontakt med øjne, næse og mund. Brug bagepulver og vand til at
neutralisere batterisyren og hjælpe med at fjerne luftbårne ætsende
midler. Rør ikke ved øjne, næse eller mund.
3.3 Find spændingen på batteriet ved at rådføre dig med køretøjets
instruktionsbog, og sørg for, at udgangsspændingen er 12 V.
3.4 Sørg for, at enhedens kabelklemmer har god kontakt.
• 20 •
4. FØLG DISSE TRIN VED TILSLUTNING TIL ET BATTERI
ADVARSEL! EN GNIST I NÆRHEDEN AF BATTERIET KAN
FORÅRSAGE BATTERIEKSPLOSION. SÅDAN REDUCERES
RISIKOEN FOR EN GNIST I NÆRHEDEN AF BATTERIET:
4.1 Tilslut klemmerne til enheden, og tilslut starthjælpskablerne
til batteriet og karosseriet som vist nedenfor. Lad aldrig
udgangsklemmerne røre hinanden.
4.2 Placer jævnstrømskablerne så du reducerer risikoen for skader på
motorhjelm, dør og bevægelige eller varme motordele.
BEMÆRK: Hvis det er nødvendigt at lukke motorhjelmen under
starthjælpen, skal man sikre, at motorhjelmen ikke berører
metaldelene på batteriklemmerne eller klippe isoleringen af kablerne.
4.3 Hold afstand til ventilatorblade, remme, remskiver og andre dele, der
kan forårsage personskade.
4.4 Kontrollér batteripolernes polaritet. PLUSPOLEN (POS, P, +) på
batteriet har normalt større diameter end MINUSPOLEN (NEG, N, -).
4.5 Find ud af, hvilken batteripol, der er stelforbundet (tilsluttet) til
chassiset. Hvis den negative pol er stelforbundet til chassiset
(som på de este køretøjer), så se trin 4.6. Hvis den positive pol er
stelforbundet til chassiset, så se trin 4.7.
4.6 På et køretøj med negativ stelforbindelse forbindes den POSITIVE
(RØDE) klemme fra starthjælpsenheden til den POSITIVE (POS, P,
+) ikke-stelforbundne pol på batteriet. Tilslut derefter den NEGATIVE
(SORTE) klemme til køretøjets karosseri eller motorblokken
på afstand af batteriet. Tilslut ikke klemmen til karburatoren,
brændstoedninger eller karosseridele af plademetal. Tilslut til en
kraftig metaldel på chassiset eller motorblokken.
4.7 På et køretøj med positiv stelforbindelse forbindes først den
NEGATIVE (SORTE) klemme fra starthjælpsenheden til den
NEGATIVE (NEG, N, -) ikke-stelforbundne pol på batteriet. Tilslut
derefter den POSITIVE (RØD) klemme til køretøjets chassis
eller motorblokken på afstand af batteriet. Tilslut ikke klemmen til
karburatoren, brændstoedninger eller karosseridele af plademetal.
Tilslut til en kraftig metaldel på chassiset eller motorblokken.
4.8 Når man er færdig med at bruge starthjælpsenheden, skal man først
fjerne klemmen fra køretøjets chassis, og derefter fjerne klemmen fra
batteripolene. Frakobl klemmekablet fra enheden.
5. OPSÆTNINGSANVISNING
5.1 Fjern eventuel emballage, og rul opladerkablet ud.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111

Schumacher SL1391U Lithium Ion Tactical Jump Starter Light SL1398U Lithium Ion Tactical Jump Starter Light SL1399U Lithium Ion Tactical Jump Starter Light Le manuel du propriétaire

Taper
Le manuel du propriétaire