BCM Advanced Research EPC-SKLU Manuel utilisateur

Taper
Manuel utilisateur
Part No. E2017CAG0A2R
EPC-SKLU
Intel® Core® SoC Processor Fanless Box PC
Quick Reference Guide
3rd Ed 17 June 2019
Copyright Notice
Copyright 2019 ALL RIGHTS RESERVED.
EPC-SKLU
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
A Message to the Customer
Customer Services
Each product is built to the most exacting specifications to ensure reliable
performance in the harsh and demanding conditions typical of industrial
environments. Whether your new device is destined for the laboratory or the factory floor,
you can be assured that your product will provide the reliability and ease of operation.
Your satisfaction is our primary concern. Here is a guide to our customer services. To
ensure you get the full benefit of our services, please follow the instructions below
carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run
into technical difficulties, we are here to help. For the most frequently asked questions, you
can easily find answers in your product documentation. These answers are normally a lot
more detailed than the ones we can give over the phone. So please consult the user’s
manual first.
2 EPC-SKLU Quick Reference Guide
Quick Reference Guide
EPC-SKLU Quick Reference Guide
3
Content
1. Getting Started ............................................................................................................ 4
1.1 Safety Precautions ................................................................................................ 4
1.2 Packing List ........................................................................................................... 4
1.3 System Specifications ........................................................................................... 5
1.4 System Overview ................................................................................................... 7
1.4.1 Front View ................................................................................................................................ 7
1.4.2 Rear View ................................................................................................................................ 7
1.5 System Dimensions ............................................................................................... 9
1.5.1 Front & Top View ..................................................................................................................... 9
2. Hardware Configuration ........................................................................................... 10
2.1 EPC-SKLU connector mapping ........................................................................... 11
2.1.1 Serial Port 1 connector (COM1) ............................................................................................ 11
2.1.2 Serial Port 2 connector (COM2) ............................................................................................ 11
2.2 Installing Hard Disk & Memory (EPC-SKLU) ....................................................... 12
2.3 Installing M.2 card & MPCIE devices (EPC-SKLU) ............................................. 15
2.4 Installing Mounting Brackets (EPC-SKLU) .......................................................... 16
2.5 Installing Din Rail Mounting (EPC-SKLU) ............................................................ 17
2.6 Installing Stand (EPC-SKLU) ............................................................................... 18
EPC-SKLU
4 EPC-SKLU Quick Reference Guide
1. Getting Started
1.1 Safety Precautions
Warning!
Caution!
Français:
Attention!
Précaution!
1.2 Packing List
1 x EPC-SKLU Intel® Core® SoC Processor Fanless Box PC
Other major components include the followings:
Screw kit/Adapter/Power Cord/EPC-SKLU Stand
Quick Reference Guide
EPC-SKLU Quick Reference Guide
5
1.3 System Specifications
System
CPU
Intel® Core™ i7-6600U Processor (4M Cache, up to 3.40 GHz)
Intel® Core™ i5-6300U Processor (3M Cache, up to 3.00 GHz)
Intel® Core™ i3-6100U Processor (3M Cache, 2.30 GHz)
Intel® Celeron® Processor 3955U (2M Cache, 2.00 GHz)
BIOS
AMI uEFI BIOS,128 Mbit SPI Flash ROM
iAMT supported
I/O Chipset
EC ITE IT8528E
System Memory
1 x 260-Pin DDR4 2133MTs SO-DIMM
(support non-ECC only)
Watchdog Timer
H/W Reset, 1sec. ~ 65535sec.
H/W Status
Monitor
Monitoring CPU Temperature, Voltage with Auto Throttling Control
Expansion
1 x Full Size Mini PCIe (mSATA)
1 x M.2 (2242,B-KEY)
Storage
Combination
1 x 2.5" Drive Bay (7mm)
1 x M.2 (2242,B-KEY)
1 x mSATA
Front I/O
Power Switch
1 x Power Switch w/ LED indicator
Rear I/O
Serial Port
1 x RS-232
1 x RS-232/422/485 (Cable & BIOS)
USB Port
4 x USB 3.0, 2 x USB 2.0
Others
2 x Knockouts for Antenna Mounting
Display
Chipset
Processor Graphics
Intel® HD Graphics 520 for i7-6600U, i-5-6300U, i3-6100U
Intel® HD Graphics 510 for Celeron 3955
Resolution
2 x HDMI: Max. Resolution 4096x2160 @ 24Hz
Multiple Display
Dual display
Ethernet
Chipset
1 x Intel I211AT
1 x Intel I219LM
Ethernet Interface
10/100/1000 Base-Tx Gigabit Ethernet Compatible
EPC-SKLU
6 EPC-SKLU Quick Reference Guide
Lan Port
2 x RJ45 w/LED
Audio
Chipset
Realtek ALC892
Mechanical & Environmental
Power Connector
Lockable DC Jack
Power Requirement
+12V ~ +26V
Power Type
AT/ATX (ATX is default)
ACPI
Single power ATX Support S0,S3, S4, S5
ACPI 5.0 Compliant
Dimension
177 x 123 x 50 mm
Weight
2.65lbs(1.2KG)
Color
Black & Blue
Mounting Kit
Stand (Default)
VESA Mount kit (Factory Option)
Din Rail kit (Factory Option)
Reliability
Vibration Test
With SSD: 5Grms, IEC 60068-2-64, Random, 10 ~ 500Hz, 30min/axis
With HDD : 0.5Grms, IEC 60068-2-64, Random, 10 ~ 500Hz, 1hr/axis
Mechanical Shock
Test
With SSD : 50G, IEC 60068-2-27, Half Sine, 11ms
With HDD : 10G, IEC 60068-2-27, Half Sine, 11ms
Drop Test
Standard Test Criteria
Operating
Temperature
With extended temperature peripherals: -10°C ~ 60°C (14°F ~ 140°F) with
0.5m/air flow
With extended temperature peripherals: -10°C ~ 50°C (14°F ~ 122°F)
0.2m/air flow
With 2.5” hard drive: 0°C ~ 40°C (32°F ~ 113°F) with 0.5m/s air flow
Operating Humidity
0% ~ 90% relative humidity, non-condensing
Storage
Temperature
-40°C ~ 75°C
Certification
CE, FCC Class B
OS Supported
Win10/8.1/7/Linux
Note: Specifications are subject to change without notice.
Quick Reference Guide
EPC-SKLU Quick Reference Guide
7
1.4 System Overview
1.4.1 Front View
1.4.2 Rear View
Connectors
Label
Function
Note
POWER
Power on button
COM1/2
Serial port 1/2 connector
D-sub 9-pin, male
HDD
HDD indicator
PWR
System power indicator
LAN1/2
RJ-45 Ethernet 1/2
USB2.0
USB 2.0 connector x 2
USB3.0
USB 3.0 connector x 4
HDMI
HDMI connector x 2
DC-IN
DC Power-in connector
EPC-SKLU
8 EPC-SKLU Quick Reference Guide
Note:
UL Certified Cables are required & purchased from the distributors.
Français:
Il est nécssaire que vous achetez des câbles certifiés par UL auprès des distributers.
Quick Reference Guide
EPC-SKLU Quick Reference Guide
9
1.5 System Dimensions
1.5.1 Front & Top View
(Unit: mm)
EPC-SKLU
10 EPC-SKLU Quick Reference Guide
2.Hardware
Configuration
For advanced information, please refer to:
1- ECM-SKLU Users Manual
Quick Reference Guide
EPC-SKLU Quick Reference Guide
11
2.1 EPC-SKLU connector mapping
2.1.1 Serial Port 1 connector (COM1)
Signal
PIN
PIN
Signal
DCD#
1
6
DSR#
RXD
2
7
RTS#
TXD
3
8
CTS#
DTR#
4
9
RI#
GND
5
2.1.2 Serial Port 2 connector (COM2)
RS-485
Signal
PIN
PIN
Signal
485_Tx-
1
6
NC
485_Tx+
2
7
NC
NC
3
8
NC
NC
4
9
NC
GND
5
RS-232
Signal
PIN
PIN
Signal
DCD#
1
6
DSR#
RXD
2
7
RTS#
TXD
3
8
CTS#
DTR#
4
9
RI#
GND
5
RS-422
Signal
PIN
PIN
Signal
422_Tx-
1
6
NC
422_Tx+
2
7
NC
422_Rx+
3
8
NC
422_Rx-
4
9
NC
GND
5
EPC-SKLU
12 EPC-SKLU Quick Reference Guide
2.2 Installing Hard Disk & Memory (EPC-SKLU)
Step1. For HDD installation, remove four screws from bottom cover.
Step2. Evert the bottom cover.
Step3. Install HDD/SSD.
Quick Reference Guide
EPC-SKLU Quick Reference Guide
13
Step4. Fix HDD/SSD with four M3*4L screws.
Step5. Put the bottom back and fix with four M3*5L screws.
EPC-SKLU
14 EPC-SKLU Quick Reference Guide
Step2. For Memory installation, properly install the memory module and press until properly
seated.
Quick Reference Guide
EPC-SKLU Quick Reference Guide
15
2.3 Installing M.2 card & MPCIE devices (EPC-SKLU)
Step1. Fix M.2 card using the screw in the Accessory Kit.
Step2. Insert MPCIE cards into designated locations and fasten with the screw to complete
MPCIE installation.
EPC-SKLU
16 EPC-SKLU Quick Reference Guide
2.4 Installing Mounting Brackets (EPC-SKLU)
Step1. Remove 4 screws from the side.
Step2. Insert and fasten screw on each side of the system to secure Mounting brackets.
Quick Reference Guide
EPC-SKLU Quick Reference Guide
17
2.5 Installing Din Rail Mounting (EPC-SKLU)
Step1. Position brackets on both sides, matching the holes on the system.
Step2. Insert and fasten screws on each side of the system to secure Mounting bracket.
EPC-SKLU
18 EPC-SKLU Quick Reference Guide
2.6 Installing Stand (EPC-SKLU)
Step1. Remove 2 screws from the side.
Step2. Fasten 2 screws on the side of the system to secure Stand.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

BCM Advanced Research EPC-SKLU Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues