Silk'n Bright Lux Manuel utilisateur

BRIGHT LUX

DE

PT

FR

DA

PL

NL

NO

LT

ES

SV

HU

IT

CS

RO

EN

TR

EN

ID: #05007

m

y

h

a

n

s

e

c

o

n

t

r

o

l

.

c

o

m

M

A

N

U

A

L

D

E

V

E

L

O

P

E

D

I

N

G

E

R

M

A

N

Y

User-friendly

Manual

EN

USER MANUAL

DA

BRUGERMANUAL

DE

BEDIENUNGSANLEITUNG

NO

BRUKERHÅNDBOK

FR

MODE D’EMPLOI

SV

ANVÄNDARMANUAL

NL

GEBRUIKSAANWIJZING

CS

NÁVOD K POUŽITÍ

ES

MANUAL DE USUARIO

PL

INSTRUKCJA OBSŁUGI

IT

MANUALE D’USO

LT

VARTOTOJO VADOVAS

TR

KULLANIM KILAVUZU

HU

HASZNÁLATI UTASÍTÁS

PT

MANUAL DO UTILIZADOR

RO

INSTRUCȚIUNI DE UTILIZARE

FAC03

A

B

2

DE

PT

FR

DA

PL

NL

NO

LT

ES

SV

HU

IT

CS

RO

EN

TR

EN

1. 2. 3. 4.

15

4 2

7

3

8

9

10

6

3

Legal notice

Invention Works B.V. reserves the right to make changes to its

products or speciﬁcations to improve performance, reliability, or

manufacturability. Information furnished by Invention Works B.V.

is believed to be accurate and reliable at the time of publication.

However, Invention Works B.V. assumes no responsibility for its

use. No license is granted by its implication or otherwise under

any patent or patent rights of Invention Works B.V.

No part of this document may be reproduced or transmitted

in any form or by any means, electronic or mechanical, for any

purpose, without the express written permission of Invention

Works B.V. Data is subject to change without notiﬁcation.

Silkn Beauty Ltd. has patents and pending patent applications,

trademarks, copyrights, or other intellectual property rights

covering subject matter in this document. The furnishing of

this document does not give you any license to these patents,

trademarks, copyrights, or other intellectual property rights

except as expressly provided in any written agreement from Silkn

Beauty Ltd. Speciﬁcations are subject to change without notice.

Silk’n and the Silk’n logo are registered trademarks of Silkn Beauty

Ltd.

Invention Works B.V.

Galileïstraat 17, 3029 AL Rotterdam, The Netherlands

www.silkn.eu – info@silkn.eu

EN

4

EN

Table of contents

1 Package contents/device parts ______________ 5

2 General information _______________________ 5

2.1 Reading and storing the user manual ______________ 5

2.2 Explanation of symbols _________________________ 5

3 Safety _____________________________________ 6

3.1 Proper use __________________________________ 6

3.2 Safety instructions _____________________________ 6

4 Checking the product and package contents _ 10

5 Charging __________________________________ 11

6 Facial cleansing ____________________________ 11

6.1 Tips on facial cleansing _________________________ 11

6.2 Switching on/o and selecting an operation mode ____ 12

6.3 Selecting a speed setting ________________________ 12

6.4 How to use __________________________________ 12

7 LED light, Infrared and cooling mode ________ 13

7.1 Tips on LED light, Infrared and cooling mode ________ 13

7.2 Switching on/o and selecting an LED mode ________ 14

7.3 How to use __________________________________ 14

7.4 Regimen ____________________________________ 15

8 Travel lock _________________________________ 15

9 Cleaning ___________________________________ 15

10 Storage ____________________________________ 16

11 Troubleshooting ___________________________ 16

12 Technical data _____________________________ 17

13 Disposal ___________________________________ 17

13.1 Disposing of the packaging ______________________ 17

13.2 Disposing of the product _______________________ 17

14 Warranty __________________________________ 18

15 Customer service __________________________ 18

5

EN 1 Package contents/device parts

1Facial brush 6Cooling surface

2Increase button (+) 7Cooling mode indicator light

3Cleansing button ( )8LED button ( )

4Decrease button (–) 9Charging port

5LED light + Infrared surface 10 USB cable

2 General information

2.1 Reading and storing the user manual

This user manual accompanies this Bright Lux

(hereafter referred to as the “product”), and

contains important information on setup and

handling.

Before using the product, read the user manual

carefully. This particularly applies to the safety instructions. Failure

to do so may result in personal injury or damage to the product.

The user manual is based on the standards and rules in force in

the European Union and United Kingdom. When abroad, you

must also observe country-speciﬁc guidelines and laws. Store

the user manual for further use. Make sure to include this user

manual when passing the product on to third parties.

2.2 Explanation of symbols

The following symbols and signal words are used in this user manual,

on the product or packaging.

WARNING!

This signal symbol/word designates a hazard with moderate risk,

which may result in death or severe injury if not avoided.

NOTICE!

This signal word warns of possible damage to property.

This signal symbol provides you with useful additional

information on handling and use.

Read the user manual.

6

EN

Declaration of Conformity: Products labelled with this

symbol meet all applicable provisions of the European

Economic Area.

Declaration of Conformity: Products labelled with this

symbol meet all applicable provisions of the United

Kingdom.

This symbol identiﬁes voltage and the current rating

for direct current.

Devices marked with this symbol are only suitable for

household use (dry indoor rooms).

IPX6 The product is protected against powerful water jets.

3 Safety

3.1 Proper use

The product is exclusively designed for facial cleansing and skin

improvement with LED light technology, Infrared and cooling. It

is only intended for private use and not suitable for commercial

purposes.

Only use the product as described in this user manual. Any other

use is considered improper and may result in damage to property

or persons. The manufacturer cannot be held liable for damages

or injury incurred through improper or incorrect use.

3.2 Safety instructions

WARNING! RISK OF ELECTRIC SHOCK!

• Only use the product with the supplied USB

cable.

• Only connect the USB cable of the product

to a suitable mains adaptor (IEC/EN 60335

certiﬁed SELV power supply) connected to

an easily accessible socket so that you can

7

EN quickly disconnect it from the mains supply

in the event of a problem.

• Do not use the product if it is damaged or if

the USB cable is defective.

• Do not open the housing; instead, have

a qualiﬁed professional perform repairs.

Contact the customer service team for this.

Liability and warranty claims are waived in

the event of repairs performed by the user,

improper connection or incorrect operation.

• Only parts that comply with the original

device data may be used for repairs. This

product contains electrical and mechanical

parts which are essential for providing

protection against sources of danger.

• Do not immerse the USB cable in water or

other liquids. Keep it away from water.

• Make sure the charging port is dry before

charging.

• Always switch the product o when you are

not using it, when you intend to clean it, or

in the event of a malfunction. Always unplug

the USB cable when you are not charging

the product.

• Never touch the USB cable with wet or

damp hands.

• Never insert any objects into the housing.

• Keep all parts of the product away from

open ﬂames and hot surfaces.

8

EN

• Lay the USB cable so that it does not pose a

tripping hazard.

• Do not pull the USB cable out of the mains

adaptor by the cord; instead, always pull it

out by the cable plug.

• Do not kink the USB cable and do not lay it

over sharp edges.

• Only charge the product at temperatures

between 0 and 40 °C.

• Only use the product indoors.

WARNING! RISK OF INJURY!

• The product can be used by children aged

from 8 years and above and persons with

reduced physical, sensory or mental capabilities

or lack of experience and knowledge if they

have been given supervision or instruction

concerning the use of the product in a safe

way and understand the hazards involved.

Children must not play with the product.

Cleaning and user maintenance must not be

performed by children.

• Keep children under the age of 8 away from

the product and USB cable.

• The product cannot be used by pregnant

women, children, people with epilepsy,

thyroid patients, people using thyroid

medications, people who are photoallergic

or use light allergy medication.

• Do not use the product on the eye lids,

9

EN inside the eye orbits, around areas that

contain inﬂammatory acne, or areas that

have rashes or wounds.

• The product cannot be used on skin

diseases, wound ulceration, trauma and

post-operative wounds.

• Do not focus the product on one spot on

your skin during use.

• Consult your physician if you are uncertain

whether you can use the product.

• Stop using the product immediately if you

feel any discomfort, develop any abnormal

reactions (such as itching or uncomfortable

inﬂammation) or in case your skin becomes

warm to the point of discomfort.

• Under abusive conditions, liquid may be

ejected from the battery; avoid contact.

Liquid ejected from the battery may cause

irritation or burns.

• If battery ﬂuid comes into contact with skin,

eyes or mucous membrane, wash and rinse

the aected areas immediately with clean

water. Consult a physician if necessary.

• The batteries must not be disassembled,

short-circuited or thrown into a ﬁre.

NOTICE! RISK OF DAMAGE!

• Do not use clay-based, silicone-based or

grainy cleansers, exfoliators or scrubs with

10

EN

the product as they may damage the soft

silicone touch-points of the product.

• Avoid leaving the product in direct sunlight

and never expose it to extreme heat or

boiling water.

• Clean the product after each use to avoid

the accumulation of grease and residues of

face wash products.

• Stop using the product if its parts exhibit

cracks or breaks or are deformed. Only

replace damaged parts with corresponding

original spare parts.

• Do not operate the product if it has been

dropped or is damaged in any way. Have

the product checked and/or repaired by

qualiﬁed technicians if necessary.

4 Checking the product and package

contents

NOTICE! RISK OF DAMAGE!

• If you are not cautious when opening the

packaging with a sharp knife or other pointed

objects, you may quickly damage the product.

Be very careful when opening it.

1. Take the product out of the packaging.

2. Check to make sure that all parts are included (see Fig. A).

3. Check whether the product or individual parts are damaged. If

this is the case, do not use the product. Contact our customer

service.

11

EN 5 Charging

• Fully charge the product before ﬁrst use and when the

battery power is low.

• When the battery power is low, the product emits

2beep sounds and the cleansing button ﬂashes 10times

before switching o automatically. Recharge the product.

• The product cannot be used during charging.

• If the product is to be stored for an extended period,

the battery level should be checked and the product

should be charged regularly.

1. Plug the smaller end of the USB cable 10 into the charging

port 9 of the product.

2. Plug the larger end of the USB cable into the USB port of a

compatible USB power source (e.g. USB power adaptor).

3. Plug the USB power adaptor into a mains socket for charging.

Charging starts automatically. The cleansing button ( ) 3

ﬂashes white during charging and stays lit when charging is done.

4. When charging is done, unplug the USB power adaptor from

the mains socket and disconnect the USB cable from the

charging port of the product.

6 Facial cleansing

WARNING! RISK OF INJURY!

• Do not use the facial brush for more than

2minutes per cleansing session and more

than 2times per day.

6.1 Tips on facial cleansing

• Clean the facial brush 1 before ﬁrst use as described in the

chapter “Cleaning”.

• Before cleansing an area of the face for the ﬁrst time, perform

a skin sensitivity test on a spot. Start your cleansing session

only if there is no adverse reaction.

• The facial brush is equipped with 2 operation modes: vibrating

mode and pulsating mode. The vibrating mode uses uniform

vibrations for deep, gentle cleansing. The pulsating mode uses

alternating strong and weak vibrations for a massage-like

soothing eect. There are also 7 speed settings for each mode.

12

EN

6.2 Switching on/o and selecting an operation mode

1. Press the cleansing button ( ) 3 once.

The facial brush 1 is switched on in the vibrating mode.

The cleansing button illuminates white during operation.

2. Press the cleansing button ( ) a second time.

The device is switched to the pulsating mode.

3. Press the cleansing button ( ) a third time.

The device is switched o.

6.3 Selecting a speed setting

• In the selected operation mode (vibrating or pulsating), press

the increase button (+) 2 or decrease button (–) 4 to

select a speed setting (1–7). The default level is 4.

6.4 How to use

1. Dampen your face and the facial brush 1 with lukewarm

water. Apply your regular face wash product on your face (see

step 1 in Fig. B).

2. Switch on the facial brush, select the vibrating mode and a

speed setting (see instructions in the previous chapters).

3. Clean your face by moving the facial brush over the face in

circular movements (see step 2 in Fig. B).

• Use the thicker studs for areas that need precise cleansing (e.g.

around the nose, eyes and chin) and use the thinner studs for

the larger areas (e.g. forehead, cheeks and neck). We recom-

mend cleansing each area for no more than 20 seconds.

• Once the facial brush starts, you hear a beep sound every

30seconds, hinting to you about the time that has passed. The

device automatically switches o after 2 minutes.

Note that whenever you change the operation mode or speed

setting during the cleansing session, the timer will be reset to

zero.

• If you want to end the cleansing session earlier, press and hold

the cleansing button ( ) 3 until the facial brush switches off.

4. Thoroughly rinse your face and the facial brush with water and

then wipe them dry with a clean, dry towel (see step 3 in

Fig. B).

5. Apply your serum or day/night cream on your face.

6. Turn on the facial brush and select the pulsating mode and a

speed setting (see instructions in the previous chapters).

13

EN 7. Massage the face by moving the facial brush over the face

in circular movements to stimulate blood circulation and

promote the absorption of your skin care product (see step 4

in Fig. B).

• The facial brush automatically switches o after 2 minutes.

• If you want to end the cleansing session earlier, press and hold

the cleansing button ( ) until the facial brush switches off.

8. Thoroughly clean the facial brush after use (see chapter

“Cleaning”).

7 LED light, Infrared and cooling mode

WARNING! RISK OF INJURY!

• Do not use the LED light + Infrared surface

and cooling surface for more than 15minutes

per LED session.

7.1 Tips on LED light, Infrared and cooling mode

• Clean the LED light + Infrared surface 5 and the cooling

surface 6 before ﬁrst use as described in the chapter

“Cleaning”.

• The LED light + Infrared surface is designed to recover your

skin’s glow and elasticity. You may also select the cooling mode,

which helps to reduce puy eyes for a brighter appearance.

• For skin improvement, you can choose from 5 modes with

various beneﬁts:

Mode Best for

Red LED light +

Infrared Reduces ﬁne lines and wrinkles, stimulates

collagen and helps to improve blood

circulation

Blue LED light +

Infrared Reduces acne-related redness and

imperfections for clearer skin

Yellow LED light

+ Infrared Improves skin hydration and sooths dry

and sensitive skin

Purple LED light

+ Infrared Anti-ageing and reduction of skin

imperfections to improve the skin’s vitality

and radiance

14

EN

Mode Best for

Red LED light

+ Infrared +

cooling

Reduces puy eyes for a brighter

appearance

7.2 Switching on/o and selecting an LED mode

1. Press the LED button ( ) 8 once.

The LED light + Infrared surface 5 is switched on in the red

LED mode.

2. Press the LED button ( ) a second time.

The device is switched to the blue LED mode.

3. Press the LED button ( ) a third time.

The device is switched to the yellow LED mode.

4. Press the LED button ( ) a fourth time.

The device is switched to the purple LED mode.

5. Press the LED button ( ) a ﬁfth time.

The device is switched to the red LED + cooling mode.

In this mode, the LED light + Infrared surface illuminates red

and the cooling surface 6 cools down to around 6 °C. The

cooling mode indicator light 7 also turns on.

6. Press the LED button ( ) a sixth time.

The device is switched o.

Tip: You can directly select the red LED + cooling mode without

pressing the LED button several times. To do so, press and hold

the LED button ( ) in any LED mode until the red LED + cooling

mode is activated.

7.3 How to use

1. Thoroughly clean and dry your face. Make sure it is free from

any make-up or dirt.

2. Turn on the LED light + Infrared surface 5 and select an LED

mode (see instructions in the previous chapter).

3. Move the LED light + Infrared surface over your face in

circular movements.

• Once the LED light + Infrared surface starts, you hear a beep

sound every 30 seconds, hinting to you about the time that has

passed. The device automatically switches o after 10minutes

(in any LED mode) or 2 minutes (red LED + cooling mode).

Note that whenever you change the mode during the LED

session, the timer will be reset to zero.

15

EN • If you want to end the LED session earlier, press the LED

button ( ) 8 repeatedly until the device switches off.

4. After the LED session, apply a serum and/or day/night cream

on your face.

7.4 Regimen

If you are using the LED light + Infrared surface 5 for the ﬁrst

time, follow the schedule below:

First week Use once every 3 days, max. 10 minutes at a time

Second week Use once every 2 days, max. 10 minutes at a time

Third week Use once every 2 days, max. 10–15 minutes at

a time

Fourth week Use once every day, max. 10–15 minutes at a

time

As soon as results show, adjust the frequency to once or twice

per week.

8 Travel lock

• Press and hold the increase button (+) 2 and decrease

button (–) 4 at the same time until you hear 2 beep sounds.

The buttons are now locked to prevent accidental activation

during travel.

• Repeat the step above to unlock the buttons.

9 Cleaning

WARNING! RISK OF ELECTRIC SHOCK!

• Always unplug the product from the power

source before cleaning.

NOTICE! RISK OF DAMAGE!

• Do not use any aggressive cleaners, brushes

with metal bristles, or sharp or metallic

cleaning utensils such as knives, hard

scrapers, and the like.

16

EN

• Do not use hot water for cleaning.

1. Clean the product with lukewarm water and soap.

2. Thoroughly rinse the product with water after cleaning and

wipe it dry with a dry cloth.

10 Storage

All parts must be completely dry before being stored.

• Store the product in a clean and dry place, avoiding heat and

direct sunlight.

• Store the product so that it is not accessible to children.

11 Troubleshooting

Some problems may be caused by minor faults that you can ﬁx

yourself. To do so, follow the instructions in the following table.

If it is still not possible to resolve the problem, contact customer

service. Do not repair the product yourself.

Fault Possible cause and solution

The product

does not

operate.

• Make sure the product is properly

charged.

• Make sure the product is not connected

to a USB power source. The product does

not work while charging.

The product

does not charge. • Make sure the USB cable 10 is securely

connected to the charging port 9 and

the USB power source.

17

EN 12 Technical data

Model: FAC03

Rated input: 5 V I A

Working voltage: 3.7 V

Battery capacity: 1,500 mAh, 5.55 Wh (lithium)

Number of LED lights: 5

Charging time: 2–3 hours

Weight: 197.7 g

IP code: IPX6

Dimensions (L × W × H): 110.5 × 75 × 44 mm

13 Disposal

13.1 Disposing of the packaging

Sort the packaging before you dispose of it.

Dispose of paperboard and cardboard with the

recycled paper service and wrappings with the

appropriate collection service.

13.2 Disposing of the product

(Applicable in the European Union and other European countries

with separate collection systems of recyclable materials)

Old appliances may not be disposed of in the

household waste!

Should the product no longer be capable of being used

at some point in time, dispose of it in accordance

with the regulations in force in your city or

county. This ensures that old appliances are recycled

in a professional manner and also rules out negative

consequences for the environment. For this reason, electrical

equipment is marked with the symbol shown here.

18

EN

Batteries and rechargeable batteries may not be

disposed of with household waste!

As the end user you are required by law to bring all

batteries and rechargeable batteries, regardless

whether they contain harmful substances* or not, to a

collection point run by the communal authority or to

a retailer, so that they can be disposed of in an

environmentally friendly manner.

Bring the entire product (including the rechargeable battery) to

your collection point and make sure that it is in an uncharged

state!

* labelled with: Cd = cadmium, Hg = mercury, Pb = lead

14 Warranty

This product is covered by a 2-year warranty according to

European regulations and law. The extent of the warranty on this

product is limited to technical defects caused by faulty production

processes. In the event you want to claim warranty please be

sure to contact our customer service for instructions. They may

be able to solve your problem without needing to return the

product to the store or our service center. Our customer service

is always pleased to help you!

15 Customer service

For more information about the products of Silk’n visit your

regional Silk’n website: www.silkn.eu. If the device is damaged,

defective, in need of repair or you need our assistance, please

contact your nearest Silk’n service center. This manual is also

available as a PDF download from: www.silkn.eu.

Service number: 0906-2130009

Email: customercareuk@silkn.eu

19

DE

Rechtlicher Hinweis

Invention Works B.V. behält sich das Recht vor, Änderungen an

seinen Produkten oder Speziﬁkationen zur Verbesserung von

Leistung, Betriebssicherheit oder Herstellbarkeit vorzunehmen.

Durch Invention Works B.V. bereitgestellte Informationen werden

zum Zeitpunkt der Veröentlichung als korrekt und verlässlich

angesehen. Die Invention Works B.V. übernimmt allerdings keine

Verantwortung für deren Verwendung. Es wird weder stillsch-

weigend noch unter einem Patent oder unter Patentrechten der

Invention Works B.V. eine Lizenz eingeräumt.

Kein Teil dieses Dokuments darf in irgendeiner Form oder mit

elektronischen oder mechanischen Mitteln für irgendwelche

Zwecke ohne ausdrückliche schriftliche Genehmigung der

Invention Works B.V. reproduziert oder übertragen werden.

Änderungen der Daten ohne Vorankündigung sind vorbehalten.

Die Silkn Beauty Ltd. verfügt über Patente sowie anhängige Patent-

anmeldungen, Handelsmarken, Urheberrechte oder sonstige Rechte

geistigen Eigentums, welche Gegenstand dieses Dokumentes sind.

Die Bereitstellung dieses Dokumentes gibt Ihnen keinerlei Lizenz

für diese Patente, Handelsmarken, Urheberrechte oder sons-

tigen Rechte geistigen Eigentums, sofern dies nicht ausdrücklich in

einer schriftlichen Vereinbarung von Silkn Beauty Ltd. geregelt ist.

Änderung der technischen Daten ohne Vorankündigung vorbe-

halten.

Silk’n und das Silk’n-Logo sind eingetragene Warenzeichen der

Silkn Beauty Ltd.

Invention Works B.V.

Galileïstraat17, 3029 AL Rotterdam, Die Niederlande

www.silkn.eu - inf[email protected]

20

DE

Inhaltsverzeichnis

1 Lieferumfang/Geräteteile ___________________ 21

2 Allgemeines _______________________________ 21

2.1 Bedienungsanleitung lesen und aufbewahren _________ 21

2.2 Symbolerklärung ______________________________ 21

3 Sicherheit _________________________________ 22

3.1 Bestimmungsgemäßer Gebrauch __________________ 22

3.2 Sicherheitshinweise ____________________________ 23

4 Produkt und Lieferumfang prüfen ____________ 28

5 Laden _____________________________________ 28

6 Gesichtsreinigung __________________________ 29

6.1 Tipps für die Gesichtsreinigung ___________________ 29

6.2 Ein-/Ausschalten und Betriebsmodus auswählen ______ 29

6.3 Geschwindigkeitseinstellung auswählen _____________ 30

6.4 Zur Verwendung ______________________________ 30

7 LED-Leuchte, Infrarot und Kühlmodus _______ 31

7.1 Tipps zu LED-Leuchte, Infrarot und Kühlmodus ______ 31

7.2 Ein-/Ausschalten und LED-Modus auswählen ________ 32

7.3 Zur Verwendung ______________________________ 32

7.4 Anwendungsplan ______________________________ 33

8 Tastensperre _______________________________ 33

9 Reinigung __________________________________ 34

10 Aufbewahrung _____________________________ 34

11 Fehlersuche ________________________________ 34

12 Technische Daten __________________________ 35

13 Entsorgung ________________________________ 35

13.1 Verpackung entsorgen __________________________ 35

13.2 Produkt entsorgen ____________________________ 36

14 Garantieinformationen _____________________ 36

15 Kundenservice _____________________________ 37

La page est en cours de chargement...

Silk'n Bright Lux Manuel utilisateur

Silk'n Bright Lux Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents