Edmax Technology STC07 Manuel utilisateur

Catégorie
Ouvre-porte
Taper
Manuel utilisateur
1
User Manual of Face Recognition
Temperature Measuring Terminal
IModel
DM1071-T ____________
IIProduct specifications
Basic
parameters
Soc
High-performance AI SoC (4-core A7 + NPU + DSP)
Memory
1GB DDR3
Storage
EMMC 8GB
Identification
requirements
Recognize height
1.2 ~ 2.2 meters, adjustable angle
Recognition distance
0.5 ~ 1.2 meters
Face angle
30 degrees left and right, 30 degrees up and down
Face recognition
Face recognition accuracy
99.99%1:1FRR 1%)
Living body detection
Support
Recognition speed
<300ms20000 face library
Face Library
default 20000, maximum 50000
1: 1 face comparison
Support
1: N face search
Support
Infrared thermal
imaging module
Temperature measurement
accuracy
≤±0.3
Temperature measurement
range
20~45
Total pixels
120*9010800
Alarm
Abnormal body
temperature alarm
Support
(body temperature alarm threshold can be set)
Alarm without a mask
Support (can be set)
Internet
LAN
RJ45100M
Wi-Fi
2.4G,802.11b/g/n
2
Screen
Size
7 inch LCD screen
Resolution
600*1024
Camera
Resolution
2 million
Type
120DB ultra-wide dynamic binocular camera
Fill light
Built-in fill light, no fear of backlight, dark light
environment
Interface
Power supply
DC 12V
Internet
1 RJ45 10M / 100M adaptive Ethernet port
USB
1 USB 2.0 interface
Lock control
1 channel lock control signal
Optional
1 interface, optional RS232 / UART
Electrical
parameters
Voltage
DC 12V
Electric current
500mA
Power
15W
Operating temperature
20~35
Storage temperature
-25~60
Packing List
Host *1, power adapter *1, power adapter *3 (American standard, British standard,
European standard), screws *8, certificate of conformity *1
Bracket*3 (Desktop, Wall-mounted, Upright type)
III Interface Description
3
IVInstallation method
Wall-mounted
1. Make positioning marks on the wall according to the positions of the 6 fixing holes of the
wall-mounted bracket A; After drilling the holes with an impact drill, fix the bracket A with expansion
screws;
2. Use the built-in screws to replace the host bracket B with a wall-mounted one, and clip the host
buckle B to the wall bracket A;
3. Use the built-in screws to fix the brackets A and B together at C and connect the power supply.
4
Upright
1. According to the gate type and actual use scene, make a hole at the appropriate position of the
gate, the reference diameter is 34.2mm;
2. Unscrew the nut A at the bottom of the column to separate the entire host and cables;
3. From above the holes, first pass the cables through the holes one by one, and insert the posts into
the holes, and then from below the turnstile, pass the cables through the nut A one by one;
4. Tighten the nut and connect the power supply, Wiegand and light.
Desktop
5
1. Remove the default column bracket, that is, remove all the screws at ABCD in the left picture to
separate the column bracket from the host;
2. Take out the desktop support in the right picture, corresponding to the original ABCD position in the
left picture, and tighten it with screws;
3. It can be placed on the desktop and can be moved at will. It can be used when connected to the
power supply.
Bracket replacement-column threading method:
Mobile phone scan code to view video guidance
VMaintenance and maintenance
1. During the installation and use of the product, please strictly abide by the electrical safety
regulations in the area of use.
2. Please inspect the product as soon as you receive it. If the product cannot be used normally,
please contact the after-sales service personnel. Please do not disassemble and repair it
yourself.The company does not assume any responsibility for product problems caused by
disassembly and modification without communication and approval.
3. Please keep your username and password properly.
4. This product has a certain waterproof function, but please do not soak the product in water.
5. Do not disassemble and repair the product by yourself, otherwise it will affect the equipment
warranty.
6. Avoid harsh or extreme environments such as extreme high temperature (or low temperature), high
humidity, vibration, radiation, and chemical corrosion during installation and use.
6
VIWarranty Card
-----------------------------------------------------------------------------------------------------------------------------
Warranty Card
Warranty instructions note:
1. Warranty certificate
Please keep this warranty card properly. If the warranty card is lost, it will not be reissued. Please be
sure to keep the invoice or relevant valid proof of purchase and present it when the machine fails to be
repaired. If you cannot provide the warranty card or related proof of purchase, the starting date of the
product's warranty period will be based on the factory date corresponding to the product serial number.
2. Warranty
From the date of sale, the product can be returned within 7 days if there is a problem, and it can be
replaced within 15 days. Under normal use, if there is a hardware failure, you can get one year of free
maintenance. After the warranty period, you need to pay for materials and maintenance man-hours.
The company will be entitled to charge maintenance fees if it falls under the following factors:
(1) The product exceeds the warranty period specified by the company.
(2) Failure or damage caused by the use, maintenance, and storage of the product not in accordance
with the product manual or the environment indicated in the manual.
(3) Damage caused by man-made.
(4) Failure or damage caused by installation, repair, debugging or disassembly by maintenance
personnel of non-authorized organizations of our company.
(5) The use of third-party products causes the company's products to malfunction or damage.
(6) Damage caused by accident or other force majeure (such as flood, fire, earthquake, etc.).
The right to interpret the above terms belongs to the company.
Address:
Customer Service Hotline:
User feedback (please fill in the following information and send it back to our company)
Product model: ___________________ Product serial number: ______________
Dealer Name: _________________ Dealer Phone: ______________
User name: ___________________ Date of purchase: ________________
mailing address:_______________________________________________________
Email: _____________________ Phone: ____________________
Repair Date
Completion
Date
Maintenance Records
Maintenance
Organization
and Personnel
7
VIIWarning
FCC statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: The user is cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
ISED Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the
device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux
CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement
ISED Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments.This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and
any part of your body.
Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de séparation d'au moins
20 cm doit être maintenue entre l'antenne de cet appareil ettoutes les personnes.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Edmax Technology STC07 Manuel utilisateur

Catégorie
Ouvre-porte
Taper
Manuel utilisateur

dans d''autres langues