TeleAdapt KD-G721 Manuel utilisateur

ENGLISH

FRANÇAIS

CD RECEIVER

RECEPTEUR CD

KD-G722/KD-G721

For installation and connections, refer to the separate manual.

Pour l’installation et les raccordements, se référer au manuel séparé.

INSTRUCTIONS

MANUEL D’INSTRUCTIONS

GET0357-003A

[EX/EU]

For canceling the display demonstration, see page 7.

Pour annuler la démonstration des affichages, référez-vous à la page 7.

Cover_KD-G722_003A_3.indd 2Cover_KD-G722_003A_3.indd 2 11/30/05 10:17:29 AM11/30/05 10:17:29 AM

2

ENGLISH

How to use the MODE button

If you press MODE, the unit goes into functions

mode, then the number buttons and 5/∞

buttons work as different function buttons.

Ex.: When number button 2 works as

MO (monaural) button.

To use these buttons for their original

functions again after pressing MODE, wait for

5 seconds without pressing any of these buttons

until the functions mode is cleared or press

MODE again.

Note: Only for [EX] model users in UK and

European countries

For security reasons, a numbered ID card

is provided with this unit, and the same ID

number is imprinted on the unit’s chassis.

Keep the card in a safe place, as it will help the

authorities to identify your unit if stolen.

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to

obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

How to reset your unit

• Your preset adjustments will also be erased.

How to forcibly eject a disc

“PLEASE” and “EJECT” appear alternately on

the display.

• If this does not work, reset your unit.

• Be careful not to drop the disc when it ejects.

Time countdown indicator

EN02-07_KD-G722_003A_3.indd 2EN02-07_KD-G722_003A_3.indd 2 11/30/05 10:18:06 AM11/30/05 10:18:06 AM

ENGLISH

3

How to read this manual

• Button operations are mainly explained with

the illustrations in the table below.

• Some related tips and notes are explained in

“More about this unit” (see pages 22 – 25).

Press briefly.

Press repeatedly.

Press either

one.

Press and hold until your

desired response begins.

Press and hold both

buttons at the same time.

The following marks are used to indicate...

: Built-in CD player operations.

: External CD changer operations.

: External USB memory operations.

: Indicator displayed for the

corresponding operation.

Warning:

If you need to operate the unit while driving,

be sure to look ahead carefully or you may be

involved in a traffic accident.

Caution on volume setting:

Discs produce very little noise compared

with other sources. Lower the volume

before playing a disc to avoid damaging

the speakers by the sudden increase of the

output level.

CONTENTS

Control panel

—

KD-G722 and KD-G721

......... 4

Remote controller —

RM-RK50

............... 5

Getting started ................................. 7

Basic operations .................................................... 7

Radio operations .............................. 8

FM RDS operations ............................ 9

Searching for your favorite FM RDS programme ... 9

Disc/USB memory operations ............. 11

Playing a disc in the unit ....................................... 11

Playing discs in the CD changer ............................. 11

Playing from a USB memory ................................. 12

Sound adjustments ........................... 15

General settings — PSM ................... 16

Title assignment ............................... 18

iPod®/D. player operations ................ 19

Other external component operations

..... 20

DAB tuner operations ........................ 21

More about this unit ......................... 22

Maintenance .................................... 25

Troubleshooting ............................... 26

Specifications ................................... 29

For safety...

• Do not raise the volume level too much, as

this will block outside sounds, making driving

dangerous.

• Stop the car before performing any

complicated operations.

Temperature inside the car...

If you have parked the car for a long time in hot

or cold weather, wait until the temperature in

the car becomes normal before operating the

unit.

EN02-07_KD-G722_003A_2.indd 3EN02-07_KD-G722_003A_2.indd 3 11/16/05 10:35:46 AM11/16/05 10:35:46 AM

4

ENGLISH

1 BAND button

2 • Control dial

•

(standby/on attenuator) button

3 DISP (display) button

4 Remote sensor

• DO NOT expose the remote sensor to

strong light (direct sunlight or artificial

lighting).

5 Display window

6 5 (up) / ∞ (down) buttons

7 T/P (traffic programme/programme type)

button

8 0 (eject) button

Parts identification

Control panel — KD-G722 and KD-G721

9 USB (Universal Serial Bus) input terminal

p SRC (source) button

q

(control panel release) button

w SEL (select) button

e MODE button

r EQ (equalizer) button

t MO (monaural) button

y SSM (Strong-station Sequential Memory)

button

u Number buttons

i RPT (repeat) button

o RND (random) button

;

4/¢ buttons

How to detach/attach the control panel

Detaching... Attaching...

CAUTION:

The lever comes out if you pressed the 0 button while the

panel is detached. If this happens, push the lever back into lock

position before attaching the panel.

Lever

EN02-07_KD-G722_003A_f.indd 4EN02-07_KD-G722_003A_f.indd 4 12/8/05 5:20:43 PM12/8/05 5:20:43 PM

ENGLISH

5

a Track information indicators—TAG (ID3

Tag),

(track/file), (folder)

s Tuner reception indicators—ST (stereo),

MO (monaural)

d RDS indicators—TP, PTY, AF, REG

f Main display

g Tr (track) indicator

h LOUD (loudness) indicator

j Source display / Volume level indicator

k Playback mode / item indicators—

RND (random),

(disc), (folder),

RPT (repeat)

Display window

l Tracks type indicators*—WMA, MP3

/ Playback source indicators*—CH (CD

changer), DISC (built-in CD player)

z EQ (equalizer) indicator

x Sound mode (C-EQ: custom equalizer)

indicators—USER, ROCK, CLASSIC,

POPS, HIP HOP, JAZZ

•

also works as the time countdown

indicator and level meter during play (see

page 17).

*

lights up for the selected item.

Caution:

The unit is equipped with the steering wheel

remote control function.

• See the Installation/Connection Manual

(separate volume) for connection.

Remote controller — RM-RK50

Installing the lithium coin battery

(CR2025)

Aim the remote controller directly at the

remote sensor on the unit. Make sure there is

no obstacle in between.

Continued on the next page

EN02-07_KD-G722_003A_2.indd 5EN02-07_KD-G722_003A_2.indd 5 11/16/05 10:35:48 AM11/16/05 10:35:48 AM

6

ENGLISH

Warning:

• Do not install any battery other than

CR2025 or its equivalent; otherwise, it may

explode.

• Store the battery in a place where children

cannot reach to avoid risk of accident.

• To prevent the battery from over-heating,

cracking, or starting a fire:

– Do not recharge, short, disassemble,

heat the battery, or dispose of it in a fire.

– Do not leave the battery with other

metallic materials.

– Do not poke the battery with tweezers or

similar tools.

– Wrap the battery with tape and insulate

when throwing away or saving it.

Main elements and features

1 (standby/on/attenuator) button

• Turns the power on if pressed briefly or

attenuates the sound when the power is

on.

• Turns the power off if pressed and held.

2 5 U (up) / D (down) ∞ buttons

• Changes the FM/AM/DAB bands with

5 U.

• Changes the preset stations (or services)

with D ∞.

• Changes the folder of the MP3/WMA/

USB.

• While playing an MP3 disc on an

MP3-compatible CD changer:

– Changes the disc if pressed briefly.

– Changes the folder if pressed and held.

• While listening to an Apple iPod

®

or a

JVC D. player:

– Pauses/stops or resumes playback with

D ∞.

– Enter the main menu with 5 U.

(Now 5 U/D ∞/2 R/F 3 work as the

menu selecting buttons.)*

3 VOL – / VOL + buttons

• Adjusts the volume level.

4 SOUND button

• Selects the sound mode (C-EQ: custom

equalizer).

5 SOURCE button

• Selects the source.

6 2 R (reverse) / F (forward) 3 buttons

• Searches for stations (or services) if

pressed briefly.

• Searches for ensembles if pressed and

held.

• Fast-forwards or reverses the track if

pressed and held.

• Changes the tracks if pressed briefly.

• While listening to an iPod or a D. player

(in menu selecting mode):

– Selects an item if pressed briefly. (Then,

press D ∞ to confirm the selection.)

– Skips 10 items at a time if pressed and

held.

*

5 U : Returns to the previous menu.

D ∞ : Confirms the selection.

EN02-07_KD-G722_003A_2.indd 6EN02-07_KD-G722_003A_2.indd 6 11/16/05 10:35:49 AM11/16/05 10:35:49 AM

ENGLISH

7

Getting started

Basic operations

~ Turn on the power.

Ÿ

*

You cannot select these sources if they

are not ready or not connected.

!

For FM/AM tuner

For DAB tuner

⁄ Adjust the volume.

@ Adjust the sound as you want. (See

page 15.)

Volume level appears.

Volume level indicator

To drop the volume in a

moment (ATT)

To restore the sound,

press it again.

To turn off the power

Basic settings

• See also “General settings — PSM” on pages

16 – 18.

1

2

1 Canceling the display

demonstrations

Select “DEMO,” then “DEMO OFF.”

2 Setting the clock

Select “CLOCK H” (hour), then adjust

the hour.

Select “CLOCK M” (minute), then

adjust the minute.

Select “24H/12H,” then “24H” (hour) or

“12H” (hour).

3 Finish the procedure.

To check the current clock time while the

power is turned off

EN02-07_KD-G722_003A_2.indd 7EN02-07_KD-G722_003A_2.indd 7 11/16/05 10:35:50 AM11/16/05 10:35:50 AM

8

ENGLISH

Radio operations

~

Ÿ

!

Start searching for a station.

When a station is received, searching

stops.

To stop searching, press the same button

again.

To tune in to a station manually

In step ! above...

1

2 Select a desired station frequency.

Lights up when receiving an FM stereo

broadcast with sufficient signal strength.

Selected band appears.

When an FM stereo broadcast is hard to

receive

Reception improves, but stereo effect will be

lost.

To restore the stereo effect, repeat the same

procedure. “MONO OFF” appears and the MO

indicator goes off.

Storing stations in memory

You can preset six stations for each band.

FM station automatic presetting —

SSM (Strong-station Sequential

Memory)

1 Select the FM band (FM1 – FM3) you

want to store into.

2

3

“SSM” appears, then disappears when

automatic presetting is over.

Local FM stations with the strongest signals are

searched and stored automatically in the FM

band.

Lights up when monaural mode is activated.

EN08-17_KD-G722_003A_3.indd 8EN08-17_KD-G722_003A_3.indd 8 11/23/05 9:48:49 AM11/23/05 9:48:49 AM

9

ENGLISH

Manual presetting

Ex.: Storing FM station of 92.5 MHz into preset

number 4 of the FM1 band.

1

2

3

Listening to a preset station

1

2 Select the preset station (1 – 6) you

want.

To check the current clock time while

listening to an FM (non-RDS) or AM station

• For FM RDS stations, see page 11.

Preset number flashes for a while.

Frequency Ô Clock

FM RDS operations

What you can do with RDS

RDS (Radio Data System) allows FM stations

to send an additional signal along with their

regular programme signals.

By receiving the RDS data, this unit can do the

following:

• Programme Type (PTY) Search (see the

following)

• TA (Traffic Announcement) and PTY

Standby Receptions (see pages 10 and 16)

• Tracing the same programme automatically

—Network-Tracking Reception (see page 11)

• Programme Search (see page 17)

Searching for your favorite

FM RDS programme

You can tune in to a station broadcasting your

favorite programme by searching for a PTY

code.

• To store your favorite programme types, see

page 10.

~ The last selected PTY

code appears.

Ÿ Select one of your favorite

programme types.

or

Select one of the PTY codes (see

page 10).

Continued on the next page

EN08-17_KD-G722_003A_2.indd 9EN08-17_KD-G722_003A_2.indd 9 11/16/05 10:35:21 AM11/16/05 10:35:21 AM

10

ENGLISH

! Start searching for your favorite

programme.

If there is a station broadcasting a

programme of the same PTY code as you

have selected, that station is tuned in.

PTY codes

NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE,

SCIENCE, VARIED, POP M (music), ROCK M (music), EASY

M (music), LIGHT M (music), CLASSICS, OTHER M (music),

WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE

IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music),

OLDIES, FOLK M (music), DOCUMENT

Storing your favorite programme

types

You can store six favorite programme types.

Preset programme types in the number buttons

(1 to 6):

1 Select a PTY code (see page 9).

2 Select the preset number (1 – 6) you

want to store into.

3 Repeat steps 1 and 2 to store other

PTY codes into other preset numbers.

Ex.: When “ROCK M” is selected

4 Finish the procedure.

Using the standby receptions

TA Standby Reception

TA Standby Reception allows the unit to switch

temporarily to Traffic Announcement (TA)

from any source other than AM.

The volume changes to the preset TA volume

level if the current level is lower than the preset

level (see page 17).

To activate TA Standby Reception

The TP (Traffic Programme)

indicator either lights up or

flashes.

• If the TP indicator lights up, TA Standby

Reception is activated.

• If the TP indicator flashes, TA Standby

Reception is not yet activated. (This occurs

when you are listening to an FM station

without the RDS signals required for TA

Standby Reception.)

To activate TA Standby Reception, tune in to

another station providing these signals. The

TP indicator will stop flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

PTY Standby Reception

PTY Standby Reception allows the unit to

switch temporarily to your favorite PTY

programme from any source other than AM.

To activate and select your favorite PTY code

for PTY Standby Reception, see page 16.

The PTY indicator either lights up or flashes.

• If the PTY indicator lights up, PTY Standby

Reception is activated.

EN08-17_KD-G722_003A_2.indd 10EN08-17_KD-G722_003A_2.indd 10 11/16/05 10:35:22 AM11/16/05 10:35:22 AM

11

ENGLISH

• If the PTY indicator flashes, PTY Standby

Reception is not yet activated.

To activate PTY Standby Reception, tune in

to another station providing these signals. The

PTY indicator will stop flashing and remain

lit.

To deactivate the PTY Standby Reception,

select “OFF” for the PTY code (see page 16).

The PTY indicator goes off.

Tracing the same programme—

Network-Tracking Reception

When driving in an area where FM reception

is not sufficient enough, this unit automatically

tunes in to another FM RDS station of the

same network, possibly broadcasting the same

programme with stronger signals (see the

illustration below).

When shipped from the factory, Network-

Tracking Reception is activated.

To change the Network-Tracking Reception

setting, see “AF-REG” on page 16.

Programme A broadcasting on different frequency areas

(01 – 05)

To check the current clock time while

listening to an FM RDS station

Disc/USB memory

operations

Playing a disc in the unit

All tracks will be played repeatedly until you

change the source or eject the disc.

To stop play and eject the disc

Playing discs in the CD changer

All discs in the magazine will be played

repeatedly until you change the source.

• Ejecting the magazine will also stop playback.

~

* If you have changed the external input

setting to “EXT IN” (see page 17), you

cannot select the CD changer.

Ÿ Select a disc.

For disc number from 01 – 06:

For disc number from 07 – 12:

Continued on the next page

Station name (PS) = Station Frequency =

Programme type (PTY) = Clock = (back to the

beginning)

EN08-17_KD-G722_003A_f.indd 11EN08-17_KD-G722_003A_f.indd 11 12/8/05 12:41:38 PM12/8/05 12:41:38 PM

12

ENGLISH

Playing from a USB memory

This unit can play MP3/WMA tracks stored in a

USB memory.

All tracks in the USB memory will be played

repeatedly until you change the source.

• Removing the USB memory will also stop

playback.

~

Ÿ

If a USB memory has been attached...

Playback starts from where it has been stopped

previously.

• If a different USB memory is currently

attached, playback starts from the beginning.

To eject the USB memory, straightly pull it out

from the unit.

Cautions:

• Avoid using the USB memory if it might

hinder your safety driving.

• Make sure all important data has been

backed up to avoid losing the data.

USB input terminal

USB memory

About MP3 and WMA tracks

MP3 and WMA “tracks” (words “file” and

“track” are used interchangeably) are recorded

in “folders.”

About the CD changer

It is recommended to use a JVC

MP3-compatible CD changer with your unit.

• You can also connect MP3-incompatible

CD changers. However, these units are not

compatible with MP3 discs.

• You cannot use the CH-X99, CH-X100, and

KD-MK series CD changers with this unit.

• You cannot play any WMA disc in the CD

changer.

• Disc text information recorded in the CD

Text can be displayed when a JVC CD Text

compatible CD changer is connected.

• For connection, see Installation/Connection

Manual (separate volume).

To fast-forward or reverse the track

To go to the next or previous tracks

To go to the next or previous folders (only for

MP3/WMA/USB)

For MP3 tracks:

For WMA tracks:

EN08-17_KD-G722_003A_3.indd 12EN08-17_KD-G722_003A_3.indd 12 11/23/05 9:48:41 AM11/23/05 9:48:41 AM

13

ENGLISH

To locate a particular track (for CD) or folder

(for MP3/ WMA/USB) directly

To select a number from 01 – 06:

To select a number from 07 – 12:

• To use direct folder access on MP3/WMA/

USB, it is required that folders are assigned

with 2-digit numbers at the beginning of their

folder names—01, 02, 03, and so on.

To select a particular track in a folder (for

MP3/WMA/USB):

Other main functions

Skipping tracks quickly during play

Only possible on JVC

MP3-compatible CD changer

• For MP3/WMA/USB, you can skip tracks

within the same folder.

Ex.: To select track 32 while playing a track

whose number is a single digit (1 to 9)

1

2

Each time you press the button, you can

skip 10 tracks.

• After the last track, the first track will be

selected and vice versa.

3

Prohibiting disc ejection

You can lock a disc in the loading slot.

To cancel the prohibition, repeat the same

procedure.

EN08-17_KD-G722_003A_2.indd 13EN08-17_KD-G722_003A_2.indd 13 11/16/05 10:35:26 AM11/16/05 10:35:26 AM

14

ENGLISH

Changing the display information

While playing an audio CD or a CD Text

While playing an MP3/WMA

*

2

disc or a

USB memory

• When “TAG DISP” is set to “TAG ON”

(see page 18)

• When “TAG DISP” is set to “TAG OFF”

: Elapsed playing time with the current

track number

: Clock with the current track number

*

1

If the current disc is an audio CD,

“NO NAME” appears.

*

2

Only for the built-in CD player and external

USB memory.

*

3

If an MP3/WMA file does not have Tag

information, folder name and file name

appear. In this case, the TAG indicator will

not light up.

Selecting the playback modes

You can use only one of the following playback

modes at a time.

1

2 Select your desired playback mode.

7 Repeat play

Mode Plays repeatedly

TRK RPT : The current track.

FLDR RPT*

4

: All tracks of the current

folder.

DISC RPT*

5

: All tracks of the current disc.

RPT OFF : Cancels.

7 Random play

Mode Plays at random

FLDR RND*

4

: All tracks of the current

folder, then tracks of the next

folder and so on.

DISC RND : All tracks of the current disc

or USB memory.

MAG RND*

5

: All tracks of the inserted

discs.

RND OFF : Cancels.

*

4

Only while playing a media (MP3/WMA/

USB).

*

5

Only while playing discs in the CD

changer.

EN08-17_KD-G722_003A_f.indd 14EN08-17_KD-G722_003A_f.indd 14 12/6/05 11:17:49 AM12/6/05 11:17:49 AM

15

ENGLISH

Sound adjustments

You can select a preset sound mode suitable to

the music genre (C-EQ: custom equalizer).

1

2

Indication (For)

BAS TRE LOUD

(bass) (treble) (loudness)

USER (Flat sound)

00 00 OFF

ROCK

(Rock or disco music)

+03 +01 ON

CLASSIC

(Classical music)

+01 –02 OFF

POPS (Light music)

+04 +01 OFF

HIP HOP

(Funk or rap music)

+02 00 ON

JAZZ (Jazz music)

+02 +03 OFF

Adjusting the sound

You can adjust the sound characteristics to your

preference.

1

2

Preset values

Indication, [Range]

BAS*

1

(bass), [–06 to +06]

Adjust the bass.

TRE*

1

(treble), [–06 to +06]

Adjust the treble.

FAD*

2

(fader), [R06 to F06]

Adjust the front and rear speaker balance.

BAL (balance), [L06 to R06]

Adjust the left and right speaker balance.

LOUD*

1

(loudness), [LOUD ON or

LOUD OFF]

Boost low and high frequencies to produce a

well-balanced sound at low volume level.

SUB.W*

3

(subwoofer), [00 to 08]

Adjust the subwoofer output level.

VOL (volume), [00 to 30 or 50*

4

]

Adjust the volume.

*

1

When you adjust the bass, treble, or loudness,

the adjustment you have made is stored for

the currently selected sound mode (C-EQ)

including “USER.”

*

2

If you are using a two-speaker system, set the

fader level to “00.”

*

3

This takes effect only when a subwoofer is

connected.

*

4

Depending on the amplifier gain control

setting. (See page 18 for details.)

Indication pattern changes

as you adjust the level.

Ex.: When “TRE” is selected

EN08-17_KD-G722_003A_f.indd 15EN08-17_KD-G722_003A_f.indd 15 12/19/05 6:31:55 PM12/19/05 6:31:55 PM

16

ENGLISH

3 Adjust the PSM item selected.

4 Repeat steps 2 and 3 to adjust the

other PSM items if necessary.

5 Finish the procedure.

You can change PSM (Preferred Setting Mode)

items listed in the table that follows.

1

2 Select a PSM item.

General settings — PSM

Indications Selectable settings, [reference page]

DEMO

Display demonstration

DEMO ON : [Initial]; Display demonstration will be activated

automatically if no operation is done for about

20 seconds, [7].

DEMO OFF : Cancels.

CLOCK H

Hour adjustment

0 – 23 (1 – 12), [7]

[Initial: 0 (0:00)]

CLOCK M

Minute adjustment

00 – 59, [7]

[Initial: 00 (0:00)]

24H/12H

Time display mode

12H O 24H, [7]

[Initial: 24H]

CLK ADJ

Clock adjustment

AUTO : [Initial]; The built-in clock is automatically adjusted

using the CT (clock time) data in the RDS signal.

OFF : Cancels.

AF-REG

Alternative frequency/

regionalization

reception

When the received signals from the current FM RDS station become

weak...

AF : [Initial]; Switches to another station (the programme

may differ from the one currently received), [11].

• The AF indicator lights up.

AF REG : Switches to another station broadcasting the same

programme.

• The AF and REG indicators light up.

OFF : Cancels (not selectable when “DAB AF” is set to “AF ON”).

PTY-STBY

PTY standby

Activates PTY Standby Reception with one of the PTY codes, [10].

OFF [Initial] = PTY codes, [10] = (back to the beginning)

EN08-17_KD-G722_003A_3.indd 16EN08-17_KD-G722_003A_3.indd 16 11/23/05 9:10:45 AM11/23/05 9:10:45 AM

17

ENGLISH

Indications Selectable settings, [reference page]

TA VOL

Traffic announcement

volume

[Initial: VOL 15]; VOL 00 — VOL 30 or 50*

1

, [10]

P-SEARCH

Programme search

ON : Using the AF data, the unit tunes in to another frequency

broadcasting the same programme as the original

preset RDS station is if the preset station signals are not

sufficient.

OFF : [Initial]; Cancels.

DAB AF*

2

Alternative frequency

reception

AF ON : [Initial]; Traces the programme among DAB services

and FM RDS stations, [11, 22].

AF OFF : Cancels.

DAB VOL*

2

DAB volume

adjustment

You can adjust the volume level (VOL –12 — VOL +12) of DAB tuner

to match the FM sound level and store it in memory.

[Initial: VOL 00]

LEVEL

Audio level meter

ON : [Initial]; Activates the audio level indicator.

OFF : Cancels; sound mode indicator is shown.

DIMMER

Dimmer

AUTO : [Initial]; Dims the display when you turn on the

headlights.

ON : Activates dimmer.

OFF : Cancels.

TEL

Telephone muting

MUTING 1/MUTING 2 : Select either one which mutes the sounds

while using a cellular phone.

OFF : [Initial]; Cancels.

SCROLL*

3

Scroll

ONCE : [Initial]; Scrolls the track information once.

AUTO : Repeats scrolling (5-second intervals in between).

OFF : Cancels.

• Pressing DISP for more than one second can scroll the display

regardless of the setting.

WOOFER

Subwoofer cutoff

frequency

LOW : Frequencies lower than 90 Hz are sent to the subwoofer.

MID : [Initial]; Frequencies lower than 135 Hz are sent to the

subwoofer.

HIGH : Frequencies lower than 180 Hz are sent to the subwoofer.

EXT IN*

4

External input

CHANGER : [Initial]; To use a JVC CD changer, [11], an Apple iPod

or a JVC D. player, [19].

EXT IN : To use any other external component than the above,

[20].

*

1

Depends on the amplifier gain control (see page 18).

*

2

Displayed only when DAB tuner is connected.

*

3

Some characters or symbols will not be shown correctly (or will be blanked) on the display.

*

4

Displayed only when one of the following sources is selected—FM, AM, CD, or USB.

Continued on the next page

EN08-17_KD-G722_003A_f.indd 17EN08-17_KD-G722_003A_f.indd 17 12/12/05 3:33:38 PM12/12/05 3:33:38 PM

18

ENGLISH

You can assign titles to CDs (both in the unit

and the CD changer). You can assign up to 30

discs and each title up to 32 characters.

• You cannot assign a title to a CD Text, an

MP3/WMA disc, or a USB memory.

1 Select the sources.

• For CDs in this unit: Insert a CD.

• For CDs in the CD changer: Select

“CD-CH,” then select a disc number.

2 Enter the title assignment mode.

3 Assign a title.

1 Select a character.

2 Move to the next (or previous)

character position.

3 Repeat steps 1 and 2 until you

finish entering the title.

4 Finish the procedure.

To erase the entire title

In step 2 on the left...

Available characters

Indications Selectable settings, [reference page]

TAG DISP

Tag display

TAG ON : [Initial]; Shows the Tag information while playing MP3/

WMA tracks, [14].

TAG OFF : Cancels.

AMP GAIN

Amplifier gain control

You can change the maximum volume level of this unit.

LOW PWR : VOL 00 – VOL 30 (Select this if the maximum power of

the speaker is less than 50 W to prevent them from being

damaged.)

HIGH PWR : [Initial]; VOL 00 – VOL 50

IF BAND

Intermediate frequency

filter

AUTO : [Initial]; Increases the tuner selectivity to reduce

interference noises between close stations. (Stereo effect

may be lost.)

WIDE : Subject to interference noises from adjacent stations, but

sound quality will not be degraded and the stereo effect

will remain.

Ex.: When “CD“ is selected as the source

Title assignment

EN18-23_KD-G722_003A_2.indd 18EN18-23_KD-G722_003A_2.indd 18 11/16/05 10:49:40 AM11/16/05 10:49:40 AM

ENGLISH

19

Continued on the next page

iPod®/D. player operations

This unit is ready for operating an Apple iPod

or a JVC D. player from the control panel.

Before operating your iPod or D. player:

Connect either one of the following (separately

purchased) to the CD changer jack on the rear

of this unit.

• Interface adapter for iPod

®

—KS-PD100 for

controlling an iPod.

• D. player interface adapter—KS-PD500 for

controlling a D. player.

• For connection, see Installation/Connection

Manual (separate volume).

• For details, refer also to the manual supplied

with the interface adapter.

Caution:

Make sure to turn off this unit or turn off the

vehicle’s ignition switch before connecting

or disconnecting the iPod or D. player.

Preparations:

Make sure “CHANGER” is selected for the

external input setting, see page 17.

~

Ÿ

Playback starts automatically from

where it has been paused*

1

or stopped*

2

previously.

! Adjust the volume.

⁄ Adjust the sound as you want. (See

page 15.)

• Make sure the equalizer on the iPod or

D. player is deactivated.

To pause*

1

or stop*

2

playback

To resume playback,

press it again.

To fast-forward or

reverse the track

To go to the next or

previous tracks

*

1

For iPod

*

2

For D. player

Selecting a track from the menu

1 Enter the main menu.

Now the 5/∞/ 4/¢ buttons

work as the menu selecting buttons*

3

.

*

3

The menu selecting mode will be canceled:

– If no operations are done for about

5 seconds.

– When you confirm the selection of a

track.

EN18-23_KD-G722_003A_f.indd 19EN18-23_KD-G722_003A_f.indd 19 12/9/05 12:33:57 PM12/9/05 12:33:57 PM

20

ENGLISH

7 Random play

ALBM RND*

Functions the same as “Shuffle Albums” of

the iPod.

SONG RND/RND ON

Functions the same as “Shuffle Songs” of

the iPod or “Random Play = On” of the D.

player.

RND OFF

Cancels.

*

For iPod: Only if you select “ALL” in

“ALBUMS” of the main “MENU.”

To check other information while listening to

an iPod or a D. player

Other external component

operations

You can connect an external component to

the CD changer jack on the rear using the Line

Input Adapter—KS-U57 (not supplied) or AUX

Input Adapter—KS-U58 (not supplied).

• For connection, see Installation/Connection

Manual (separate volume).

For listening to the USB memory, see pages

12 – 14; For iPod or D. player, see pages 19 – 20.

~

If “EXT IN” does not appear, see page 17

and select the external input (“EXT IN”).

2 Select the desired menu.

For iPod:

PLAYLIST Ô ARTISTS Ô ALBUMS Ô SONGS

Ô GENRES Ô COMPOSER Ô (back to the

beginning)

For D. player:

PLAYLIST Ô ARTIST Ô ALBUM Ô GENRE

Ô TRACK Ô (back to the beginning)

3 Confirm the selection.

To move back to the previous

menu, press 5.

• If a track is selected, playback starts

automatically.

• If the selected item has another layer, you

will enter the layer. Repeat steps 2 and 3

until the desired track is played.

• Holding

4/¢ can skip 10

items at a time.

Selecting the playback modes

1

2 Select your desired playback mode.

7 Repeat play

ONE RPT

Functions the same as “Repeat One” of

the iPod or “Repeat Mode = One” for the

D. player.

ALL RPT

Functions the same as “Repeat All” of the

iPod or “Repeat Mode = All” for the D.

player.

RPT OFF

Cancels.

EN18-23_KD-G722_003A_f.indd 20EN18-23_KD-G722_003A_f.indd 20 12/10/05 9:33:37 AM12/10/05 9:33:37 AM

La page est en cours de chargement...

TeleAdapt KD-G721 Manuel utilisateur

Ce manuel convient également à

TeleAdapt KD-G721 Manuel utilisateur

dans d''autres langues

Autres documents