JVC KD-LH911 Manuel utilisateur

ENGLISH

FRANÇAIS

CD/SD RECEIVER

RECEPTEUR CD/SD

KD-LH911

For installation and connections, refer to the separate manual.

Pour l’installation et les raccordements, se référer au manuel séparé.

INSTRUCTIONS

MANUEL D’INSTRUCTIONS

GET0275-003A

[EX/EU]

For canceling the display demonstration, see page 9.

Pour annuler la démonstration des affichages, référez-vous à la page 9.

Cover_KD-LH911[EX_EU]f.indd 2Cover_KD-LH911[EX_EU]f.indd 2 1/7/05 6:56:07 PM1/7/05 6:56:07 PM

2

ENGLISH

How to reset your unit

This will reset the microcomputer. Your

preset adjustments will also be erased.

Warning:

If you need to operate the receiver while

driving, be sure to look ahead carefully or

you may be involved in a traffic accident.

Cautions:

If the temperature inside the car is below

0°C, the movement of animation and text

scroll will be halted on the display to prevent

the display from being blurred.

appears on the display.

When the temperature increases, and the

operating temperature is resumed, these

functions will start working again.

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to

obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

Note: Only for [EX] model users in UK and European countries

For security reasons, a numbered ID card is provided with this receiver, and the same ID number is

imprinted on the receiver’s chassis. Keep the card in a safe place, as it will help the authorities to

identify your receiver if stolen.

EN02-07_LH911[EX_EU]f.indd 2EN02-07_LH911[EX_EU]f.indd 2 1/7/05 6:56:20 PM1/7/05 6:56:20 PM

3

ENGLISH

How to reset your unit ........................... 2

How to read this manual ........................ 4

How to forcibly eject a disc ................... 4

How to change the display pattern ........ 5

How to enter the various menus ............ 5

Control panel — KD-LH911 ........ 6

Parts identification ................................. 6

Remote controller —

RM-RK300 ............................. 7

Main elements and features ................... 7

Getting started ....................... 8

Basic operations .................................. 8

Canceling the display demonstrations ... 9

Setting the clock .................................... 9

Radio operations ................... 10

Listening to the radio ........................... 10

Storing stations in memory .................... 11

Listening to a preset station ................... 12

FM RDS operations ................. 13

Searching for your favorite FM RDS

programme

....................................... 13

Storing your favorite programmes ......... 14

Using the standby receptions ................. 15

Tracking the same programme—

Network-Tracking Reception ............ 16

Disc/SD card operations ......... 17

Playing a disc in the receiver ................ 17

Playing discs in the CD changer ............ 18

Playing an SD card .............................. 19

Other main functions ............................. 21

Selecting the playback modes ................ 23

Sound adjustments ................ 25

Setting the basic sound selection

menu — SEL ................................... 25

Selecting preset sound modes

(i-EQ: intelligent equalizer) ............... 27

Storing your own sound modes ............. 27

Graphic displays .................... 29

Basic procedure ................................... 29

Downloading the files ............................ 30

Deleting the files .................................... 31

Activating the downloaded files ............ 33

General settings — PSM ......... 34

Basic procedure ..................................... 34

Selecting the dimmer mode ................... 38

Changing the display color .................... 39

Other main functions ............. 41

Assigning titles to the sources ............... 41

Changing the control panel angle .......... 42

Detaching the control panel ................... 42

External component operations

... 43

Playing an external component ............ 43

DAB tuner operations

................ 44

Listening to the DAB tuner ................... 44

Storing DAB services in memory .......... 46

Tuning in to a preset DAB service ........ 46

Using the standby reception .................. 47

Tracing the same programme

—Alternative Reception

..................... 48

Maintenance .......................... 49

More about this receiver ........ 50

Troubleshooting ..................... 54

Specifications ......................... 57

*Temperature inside the car....

If you have parked the car for a long time in

hot or cold weather, wait until the temperature

in the car becomes normal before operating the

unit.

Contents

*For safety....

• Do not raise the volume level too much, as

this will block outside sounds, making driving

dangerous.

• Stop the car before performing any

complicated operations.

EN02-07_LH911[EX_EU]f.indd 3EN02-07_LH911[EX_EU]f.indd 3 1/7/05 6:56:21 PM1/7/05 6:56:21 PM

4

ENGLISH

How to forcibly eject a disc

If a disc cannot be recognized by the receiver or

cannot be ejected, ejects the disc as follows.

• If an SD card is inserted, ejects the SD card

first (see page 19).

1

2

• If this does not work, reset your receiver.

• Be careful not to drop the disc when it

ejects.

Caution on volume setting:

Discs produce very little noise compared

with other sources. Lower the volume

before playing a disc to avoid damaging

the speakers by the sudden increase of the

output level.

How to read this manual

The following methods are used to make the

explanations simple and easy-to-understand:

• Some related tips and notes are explained in

“More about this receiver” (see pages

50 – 53).

• Button operations are mainly explained with

the illustrations as follows:

Press briefly.

Press repeatedly.

Press either one.

Press and hold until

your desired response

begins.

Press and hold both

buttons at the same

time.

The following marks are used to indicate...

: Built-in CD player operations.

: External CD changer operations.

: SD player operations.

EN02-07_LH911[EX_EU]f.indd 4EN02-07_LH911[EX_EU]f.indd 4 1/7/05 6:56:22 PM1/7/05 6:56:22 PM

5

ENGLISH

How to change the display pattern

Ex.: When tuner is selected as the source

Source display pattern /

Audio level meters

Clock display pattern

Graphic screen appears only after

you have downloaded a file,

(see pages 29 – 33).

How to enter the various menus

The main menu contains six menus (MODE,

PSM, SEL, PICT, EQ, TITLE).

1

2 Move the cursor to select a menu you

want (MODE, PSM, SEL, PICT, EQ,

TITLE).

• To go back to the previous screen, press

BACK.

* Works as time countdown indicator.

3 Enter the selected menu.

Ex.: When MODE menu is selected

• To go back to the MENU screen, press

MENU.

4 Operate as instructed on the screen.

*

EN02-07_LH911[EX_EU]f.indd 5EN02-07_LH911[EX_EU]f.indd 5 1/7/05 6:56:22 PM1/7/05 6:56:22 PM

6

ENGLISH

Control panel — KD-LH911

Parts identification

1 + / – button

2 (standby/on attenuator) button

3 5 (up) button

4

4/¢ buttons

5 Display window

6 T/P (traffic programme/programme type)

button

7 0 (eject) button

(angle) button

8 SOURCE button

9 OK button

p Reset button

q ∞ (down) button

w Remote sensor

• DO NOT expose the remote sensor to

strong light (direct sunlight or artificial

lighting).

e MENU button

r DISP (display) button

t BACK button

y

(control panel release) button

u BAND button

EN02-07_LH911[EX_EU]f.indd 6EN02-07_LH911[EX_EU]f.indd 6 1/7/05 6:56:23 PM1/7/05 6:56:23 PM

7

ENGLISH

Remote controller — RM-RK300

Installing the lithium coin battery

(CR2025)

• When operating, aim the remote controller

directly at the remote sensor on the

receiver. Make sure there is no obstacle in

between.

Warning:

• Store the battery in a place where children

cannot reach to avoid risk of accident.

• To prevent the battery from over-heating,

cracking, or starting a fire:

– Do not recharge, short, disassemble, or

heat the battery or dispose of it in a fire.

– Do not leave the battery with other

metallic materials.

– Do not poke the battery with tweezers or

similar tools.

– Wrap the battery with tape and insulate

when throwing away or saving it.

Caution:

The receiver is equipped with the steering

wheel remote control function.

• See the Installation/Connection Manual

(separate volume) for connection.

Main elements and features

1 (standby/on/attenuator) button

• Turns on and off the power and also

attenuates the sound.

2 SOURCE button

• Selects the source.

3 5 (up) / ∞ (down) buttons

• Changes the preset stations.

• Changes the services for DAB.

• Changes the MP3/WMA folders.

4 VOL (volume) + / – buttons

• Adjusts the volume level.

5 Number buttons

• Selects the preset station (or service) if

pressed, or store a station (or a service) if

pressed and held.

• Selects the tracks while playing an audio

CDs or CD Text.

• Selects the folders while playing

MP3/WMA discs or an SD card.

• Selects the discs while operating the CD

changer.

6 ANGLE button

• Adjusts the control panel angle.

7 BAND button

• Selects the band for FM/AM and DAB.

8 4 / ¢ buttons

• Searches for stations (or ensembles) if

pressed, or skips frequencies after pressed

and held.

• Changes the tracks of the disc or of the

SD card if pressed.

• Fast-forwards or reverses the track if

pressed and held.

EN02-07_LH911[EX_EU]f.indd 7EN02-07_LH911[EX_EU]f.indd 7 1/7/05 6:56:23 PM1/7/05 6:56:23 PM

8

ENGLISH

~

Ÿ

You cannot select some sources if they

are not ready.

! • For FM/AM tuner only

• For DAB tuner only

⁄ Adjust the volume.

To show the level meter (see page 36).

@ Adjust the sound as you want.

(See pages 25 – 28.)

To drop the volume in a moment (ATT)

To restore the sound,

press it again.

To turn off the power

Getting started

Basic operations

EN08-13_LH911[EX_EU]f.indd 8EN08-13_LH911[EX_EU]f.indd 8 1/7/05 6:56:52 PM1/7/05 6:56:52 PM

9

ENGLISH

Setting the clock

1 Enter the PSM menu (see page

5).

2 Set the hour, minute, and clock

system.

1 Select “Clock Hr” (hour), then

adjust the hour.

2 Select “Clock Min” (minute), then

adjust the minute.

3 Select “24H/12H,” then select

“24Hours” or “12Hours.”

3 Exit from the setting.

To check the current clock time when the

power is turned off

Canceling the display

demonstrations

If no operations are done for about 20 seconds,

display demonstration starts.

[Initial: Demo]—see page 34.

1 Enter the PSM menu (see page

5).

2 Select “Off.”

• Make sure “Demo/Link” is shown

on the display. If not, press 5 or ∞.

3 Exit from the setting.

To activate the display demonstration

In step 2 above, select “Demo” or

“Image Link.” For more details, see page 34.

EN08-13_LH911[EX_EU]f.indd 9EN08-13_LH911[EX_EU]f.indd 9 1/7/05 6:56:54 PM1/7/05 6:56:54 PM

10

ENGLISH

To tune in to a station manually

In step ! on the left...

1

2 Select the desired station frequencies.

Radio operations

~

Ÿ

! Start searching for a station.

When a station is received, searching

stops.

To stop searching, press the same

button again.

Listening to the radio

Clock display

EN08-13_LH911[EX_EU]f.indd 10EN08-13_LH911[EX_EU]f.indd 10 1/7/05 6:56:55 PM1/7/05 6:56:55 PM

11

ENGLISH

When an FM stereo broadcast is hard to

receive

1 Enter the MODE menu (see page 5).

2 Select “Mono.”

3 Select “On.”

Reception improves, but stereo effect will

be lost.

4 Exit from the setting.

To restore the stereo effect, repeat the same

procedure and select “Off” on step 3.

Storing stations in memory

You can preset six stations for each band.

FM station automatic presetting —

SSM (Strong-station Sequential

Memory)

1

2

Select the FM band (FM1 – FM3)

you want to store into.

3 Enter the MODE menu (see page

5).

4 Select “SSM.”

5

Local FM stations with the strongest signals are

searched and stored automatically in the FM

band.

EN08-13_LH911[EX_EU]f.indd 11EN08-13_LH911[EX_EU]f.indd 11 1/7/05 6:56:55 PM1/7/05 6:56:55 PM

12

ENGLISH

Manual presetting

Ex.: Storing FM station of 92.5 MHz into the

preset number 4 of the FM1 band.

1

2

3

• By holding 5/∞, the Preset Station List

will also appears (see step 7 below).

4 Enter the MODE menu (see page

5).

5 Select “List.”

6

7 Select a preset number.

• If the current band is FM, you can move to

the lists of the other FM bands by pressing

4/¢.

8 Store the station.

Listening to a preset station

1

2

3 Perform steps 4 to 7 (on left column)

to enter the Preset Station List.

4

EN08-13_LH911[EX_EU]f.indd 12EN08-13_LH911[EX_EU]f.indd 12 1/7/05 6:56:56 PM1/7/05 6:56:56 PM

13

ENGLISH

You can tune in to a station broadcasting your

favorite programme by searching for a PTY code.

•

To store your favorite programme, see page

14.

~

Ÿ Select a PTY code.

• You can move to the other lists by

pressing 4/¢.

FM RDS operations

Searching for your favorite FM RDS programme

! Start searching for your favorite

programme.

If there is a station broadcasting a

programme of the same PTY code as

you have selected, that station is tuned

in.

EN08-13_LH911[EX_EU]f.indd 13EN08-13_LH911[EX_EU]f.indd 13 1/13/05 1:17:27 PM1/13/05 1:17:27 PM

14

ENGLISH

2 Select a PTY code.

• You can move to the other lists by

pressing 4/¢.

3

4 Select a preset number.

5 Store the setting.

6 Repeat steps 2 to 5 to store other

PTY codes into other preset

numbers.

7 Exit from the setting.

What you can do with RDS

RDS (Radio Data System) allows FM

stations to send an additional signal along

with their regular programme signals.

By receiving the RDS data, this receiver can

do the following:

•

Programme Type (PTY) Search (see page 13)

• Temporarily switches to Traffic

Announcement—TA Standby Reception.

(See page 15.)

• Temporarily switches to your favorite

programme—PTY Standby Reception. (See

pages 14 – 16, and 36.)

•

Tracing the same programme automatically

—Network-Tracking Reception (see page 16)

• Programme Search (see page 36)

PTY codes

News, Affairs, Info, Sport, Educate, Drama,

Culture, Science, Varied, Pop M (music),

Rock M (music), Easy M (music),

Light M (music), Classics, Other M

(music), Weather, Finance, Children, Social,

Religion, Phone In, Travel, Leisure, Jazz,

Country, Nation M (music), Oldies, Folk M

(music), Document

Storing your favorite programmes

You can store six favorite programme types.

Preset programme types:

1

EN14-19_LH911[EX_EU]f.indd 14EN14-19_LH911[EX_EU]f.indd 14 1/13/05 1:18:02 PM1/13/05 1:18:02 PM

15

ENGLISH

Using the standby receptions

TA Standby Reception

TA Standby Reception allows the receiver to

switch temporarily to Traffic Announcement

(TA) from any source other than AM.

• If a station starts broadcasting a traffic

announcement, “Traffic News” appears on the

display, and this receiver temporarily tunes

in to the station. The volume changes to the

preset TA volume level (see page 36).

To activate TA Standby Reception

• If the TP indicator lights up, TA Standby

Reception is activated.

• If the TP indicator flashes, TA Standby

Reception is not yet activated. (This occurs

when you are listening to an FM station

without the RDS signals required for TA

Standby Reception.)

To activate TA Standby Reception, tune in to

another station (or service) providing these

signals. The TP indicator will stop flashing

and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

PTY Standby Reception

PTY Standby Reception allows the receiver

to switch temporarily to your favorite PTY

programme from any source other than AM.

• This function also takes effect for the DAB

tuner.

To select your favorite PTY code for PTY

Standby Reception, see page 36.

The PTY indicator either lights up or flashes.

To activate the PTY Standby Reception

1 Enter the MODE menu (see page 5).

2 Select “PTY.”

3 Select one of the PTY codes (see page

14).

To be continued...

TP indicator appears.

EN14-19_LH911[EX_EU]f.indd 15EN14-19_LH911[EX_EU]f.indd 15 1/7/05 6:57:42 PM1/7/05 6:57:42 PM

16

ENGLISH

4 Exit from the setting.

• If the PTY indicator lights up, PTY

Standby Reception is activated.

• If the PTY indicator flashes, PTY Standby

Reception is not yet activated.

To activate PTY Standby Reception, tune

in to another station (or service) providing

these signals. The PTY indicator will stop

flashing and remain lit.

To deactivate the PTY Standby Reception

Select “Off” in step 3 on page 15.

The PTY indicator goes off.

Tracking the same programme—

Network-Tracking Reception

When driving in an area where FM reception

is not sufficient enough, this receiver

automatically tunes in to another FM RDS

station of the same network, possibly

broadcasting the same programme with stronger

signals (see the illustration below).

When shipped from the factory, Network-

Tracking Reception is activated.

To change the Network-Tracking Reception

setting, see “AF-Regn’l” on page 36.

Programme A broadcasting on different

frequency areas (01 – 05)

PTY indicator appears.

EN14-19_LH911[EX_EU]f.indd 16EN14-19_LH911[EX_EU]f.indd 16 1/7/05 6:57:43 PM1/7/05 6:57:43 PM

17

ENGLISH

Disc/SD card operations

Playing a disc in the receiver

About MP3 and WMA discs

MP3 and WMA (Windows Media

®

Audio)

“tracks” (words “file” and “track” are used

interchangeably) are recorded in “folders.”

• When an MP3 or a WMA folder includes

an image <jll> file edited by Image

Converter (Wide Ver 1.2)—supplied in the

CD-ROM, you can show the image on the

display while the tracks in the folder are

played back—Image Link. (See pages 19,

34, and 52 for details.)

• When inserting an MP3 or a WMA disc:

All tracks will be

played repeatedly until

you change the source

or eject the disc.

• When inserting an audio CD or a CD Text

disc:

*

1

Either the MP3 or WMA indicator lights up

depending on the detected file.

*

2

The album name/performer with indicator

and the track title with

indicator will

appear if “ID3 Tag” is set to “On” (see

page 36).

*

3

Appear only for CD Texts and CDs if it has

been assigned or recorded. (“No Name”

appears for a while if no name is recorded

or assigned to an audio CD.)

To stop play and eject the disc

To return the control panel to

its previous position, press it

again.

Total playing

time

Clock display

Total track number

Total folder number

Total track number

File type

*

1

Track name*

3

Current track

number

Disc name

*

3

Current folder

number

Current

track

number

Folder name

*

2

Track name*

2

Elapsed

playing

time

Clock display

EN14-19_LH911[EX_EU]f.indd 17EN14-19_LH911[EX_EU]f.indd 17 1/7/05 6:57:43 PM1/7/05 6:57:43 PM

18

ENGLISH

• When the current disc is an MP3 disc:

• When the current disc is an audio CD or a

CD Text disc:

*

1

The album name/performer with indicator

and the track title with

indicator will

appear if “ID3 Tag” is set to “On” (see

page 36).

*

2

Appear only for CD Texts and CDs if it has

been assigned or recorded. (“No Name”

appears for a while if no name is recorded

or assigned to an audio CD.)

Playing discs in the CD changer

About the CD changer

It is recommended to use the JVC MP3-

compatible CD changer with your receiver.

• You can also connect other CH-X series

CD changers (except CH-X99 and

CH-X100). However, they are not

compatible with MP3 discs, so you cannot

play back MP3 discs.

• You cannot use the KD-MK series CD

changers with this receiver.

• Disc text information recorded in the CD

Text can be displayed when a JVC CD

Text compatible CD changer is connected.

• You cannot control and play any WMA

disc in the CD changer.

All tracks of the inserted discs in the magazine

will be played repeatedly until you change

the source or eject the magazine from the CD

changer.

~

*

If you have changed “Ext Input”

setting to “Ext In” (see page 37), you

cannot select the CD changer.

Current

folder

number

Current

track

number

Folder name*

1

Track name*

1

Current

disc

number

Track name*

2

Current track

number

Current disc

number

Disc

name*

2

Clock display

EN14-19_LH911[EX_EU]f.indd 18EN14-19_LH911[EX_EU]f.indd 18 1/7/05 6:57:44 PM1/7/05 6:57:44 PM

19

ENGLISH

Playing an SD card

About the SD card

You can play back MP3/WMA tracks

recorded on the SD card and show the stored

image on the display during playback—

Image Link. (See pages 17, 34, and 52 for

details.)

The required SD recording format is FAT

12/16 and the recommended storage type is

8 MB to 512 MB.

• You cannot use MMC or mini SD with this

receiver.

Before detaching the control panel, turn off the

power.

~ Detach the control panel.

Ÿ

Press in the SD card until you hear a

clicking sound.

To eject the SD card, press the SD

card again.

To be continued....

SD loading slot

SD card

EN14-19_LH911[EX_EU]f.indd 19EN14-19_LH911[EX_EU]f.indd 19 1/7/05 6:57:45 PM1/7/05 6:57:45 PM

20

ENGLISH

! Attach the control panel.

⁄ • The control panel goes

back to the previous

position (see page 42).

Playback starts automatically if tracks

are recorded.

If an SD card has been loaded....

1

2

* The album name/performer with

indicator and the track title with

indicator will appear if “ID3 Tag” is

set to “On” (see page 36).

Track name*

Current

track

number

Folder name

*

Current folder

number

Elapsed

playing

time

Track name*

Current

track

number

Folder name

*

Current folder

number

Elapsed

playing

time

Clock display

EN20-27_LH911[EX_EU]f.indd 20EN20-27_LH911[EX_EU]f.indd 20 1/7/05 6:58:10 PM1/7/05 6:58:10 PM

La page charge ...

JVC KD-LH911 Manuel utilisateur

JVC KD-LH911 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents