Pioneer DEH-P920R Le manuel du propriétaire

Catégorie
Lecteur CD
Taper
Le manuel du propriétaire
Multi-CD/DAB control DSP High power CD player
with RDS tuner
Syntoniseur RDS, lecteur de CD, “Puissance élevée”,
processeur de signal numérique (DSP) et contrôleur
DAB/CD
Operation Manual
DEH-P920R
Mode d’emploi
ENGLISH
FRANÇAIS ESPAÑOL
1
Contents
Dear Customer ............................................ 3
Key Finder .................................................... 4
-
Head Unit
-
Remote Controller
Before Using This Product ...................... 5
About This Product .......................................... 5
About This Manual ............................................ 5
Important .......................................................... 5
Resetting the Microprocessor ............................ 5
About the Demo Mode ...................................... 6
-
Reverse Demo
-
Feature Demo
When using the DAB
(Digital Audio Broadcasting) Tuner .......... 7
-
About This Product’s Indications
-
Operation
Precaution ........................................................ 10
After-sales Service for Pioneer Products ........ 10
Remote Controller and Care .................. 11
Using the Remote Controller .......................... 11
Batteries .......................................................... 12
Basic Operation ...................................... 13
To Listen to Music .......................................... 13
Basic Operation of Tuner ................................ 14
-
Manual and Seek Tuning
-
Preset Tuning
-
Band
Basic Operation of Built-in CD Player .......... 15
-
Switching the Display
-
Eject
-
Switching the Display
(only for CD TEXT Discs)
-
Track Search and Fast Forward/Reverse
-
Disc Loading Slot
-
Open
Basic Operation of Multi-CD Player .............. 17
-
Switching the Display
-
Track Search and Fast Forward/Reverse
-
Disc Search
-
Switching the Display
(When playing a CD TEXT disc on a CD
TEXT compatible Multi-CD player)
-
Disc Number Search
(for 6-Disc, 12-Disc types)
-
Disc Number Rough Search
(for 50-Disc type only)
Corresponding Display Indications
and Buttons................................................ 19
Entering the Function Menu ............................ 19
Function Menu Functions ................................ 20
Entering the Detailed Setting Menu ................ 22
Detailed Setting Menu Functions .................... 23
Tuner Operation ...................................... 24
-
Local Seek Tuning (LOCAL)
-
Selecting Stations by Station List
(Station List)
-
Best Stations Memory
(Best Stations Memory)
Using the RDS Functions ........................ 26
PTY Function .................................................. 26
-
Searching the PTY
-
PTY Alarm
-
Canceling Announcements
Display Modes ................................................ 28
TA Function (Traffic Announcement) ............ 29
-
Activating/Deactivating the TA Function
-
Canceling Traffic Announcements
-
Adjusting the TA Volume
Radio Text ...................................................... 31
-
Radio Text Display
-
Storing Radio Text in Memory
-
Recalling Preset Radio Text
Using the Built-in CD Player .................. 33
-
Repeat Play (Play Mode)
-
Random Play (RandomPlay)
-
Scan Play (Scan Play)
-
Pause (Pause)
-
Selecting Tracks by Track Title List
(Track List)
-
Disc Title Input (Title Input ABC)
Using Multi-CD Players .......................... 36
-
Repeat Play (Play Mode)
-
Random Play (RandomPlay)
-
Scan Play (Scan Play)
-
Pause (Pause)
Compression and DBE (Compression) ............ 38
-
Comp./DBE ON/OFF Switching
ITS (Instant Track Selection) .......................... 38
-
ITS Programming (ITS Memory)
-
ITS Play (ITS Play)
-
Erase a Track Program
-
Erase a Disc Program
Disc Title ........................................................ 40
-
Disc Title Input (Title Input ABC)
-
Selecting Discs by Disc Title List
(Disc List)
-
Selecting Tracks by Track Title List
(Track List)
Audio Adjustment .................................... 42
Selecting the Equalizer Curve ........................ 42
Entering the Audio Menu 1 ............................ 42
Audio Menu 1 Functions ................................ 43
-
Balance Adjustment (FAD/BAL)
Graphic Equalizer ............................................ 43
-
About the Flat and Custom
-
Recalling the Equalizer Curves (EqualizEr)
-
Adjusting the Equalizer Curves (EqualizEr)
Sound Field Control and Octaver .................... 46
-
Recalling the Sound Field Program
(SFC & OCT)
Position Selector .............................................. 47
-
About the Position Indicator
-
Setting the Listening Position (Position)
Entering the Audio Menu 2 ............................ 48
Audio Menu 2 Functions ................................ 49
-
Subwoofer Output (Sub W-1)
-
Subwoofer Setting Adjustment (Sub W-2)
-
Non-Fading Output (Non FadE-1)
-
Non-Fading Output Level Adjustment
(Non FadE
-2)
-
High Pass Filter (High Pass)
-
Loudness Adjustment (LoudnEss)
-
Automatic Sound Levelizer (ASL) Function
-
Source Level Adjustment (SLA) Function
Auto-equalizing Function ................................ 53
-
Before Operating the Auto-equalization
-
Auto-equalizing
-
Error Codes of Auto-equalizing Function
Detaching and Replacing
the Front Panel .................................. 57
Theft Protection .............................................. 57
-
Detaching the Front Panel
-
Replacing the Front Panel
-
Warning Tone
Initial Setting ............................................ 59
Entering the Initial Setting Menu .................... 59
Initial Setting Menu Functions ........................ 60
-
Setting the Calendar and Time
(Calendar&Time)
-
Setting the DAB Priority Function
(DAB Priority)
-
Setting the Warning Tone (Warning Tone)
-
Switching the “Multi-CD” Display
(“Multi-CD” display)
-
Switching the AUX Mode (AUX)
-
Switching the Rear Speaker Output
(Rear Speaker Out)
-
Setting the Subwoofer Control
(Sub woofer control)
-
Setting the Dimmer (Dimmer)
-
Selecting the Digital Attenuator
(Digital Attenuator)
-
Selecting the Wall Paper (Wall Paper)
-
Selecting the Brightness (Brightness)
DFS Alarm Function ................................ 64
Activating the DFS Alarm Feature .................. 64
Setting Entry Delay Time ................................ 64
Activating Internal Speaker ON/OFF ............ 65
-
Speaker Volume Output Adjustment
Setting the Selectable Output
(Pulsed/Constant Output) ........................ 66
Selecting Door Switching Systems ................ 66
-
Door System Confirmation
Starter Disable ................................................ 68
Central Door Lock Systems ............................ 69
-
Selecting the Door Lock Type
-
Door Lock Confirmation
Operation of “DFS Alarm” ............................ 70
Arming Alarm ................................................ 70
Disarming Alarm ............................................ 71
Entry Detection .............................................. 71
Other Functions ........................................ 72
Time Display .................................................. 72
-
Displaying the Time
Off Clock ........................................................ 72
Switching the Entertainment Display .............. 73
Using the PGM Button (Program Function) .... 74
-
Setting PGM Button
-
Using the PGM Button
Using the AUX Source .................................... 76
-
Selecting the AUX Source
-
AUX Title Input
Cellular Telephone Muting .............................. 76
CD Player and Care .................................. 77
Precaution ........................................................ 77
Built-in CD Player’s Error Message .............. 77
Specifications .......................................... 78
2
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS
ITALIANO NEDERLANDS
3
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your
musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your
equipment offers. This manufacturer and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your equipment by playing it at a safe level.
One that lets the sound come through loud and clear without annoying blaring or distortion—and,
most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against
this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
Start your volume control at a low setting.
Slowly increase the sound until you can hear it comfortably and clearly, and without distor-
tion.
Once you have established a comfortable sound level:
Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all,
we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the
Electronic Industries Association’s Consumer Electronics Group recommend you avoid pro-
longed exposure to excessive noise. This list of sound levels is included for your protection.
Decibel
Level Example
30 Quiet library, soft whispers
40 Living room, refrigerator, bedroom away from traffic
50 Light traffic, normal conversation, quiet office
60 Air conditioner at 20 feet, sewing machine
70 Vacuum cleaner, hair dryer, noisy restaurant
80 Average city traffic, garbage disposals, alarm clock at two feet.
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE
90 Subway, motorcycle, truck traffic, lawn mower
100 Garbage truck, chain saw, pneumatic drill
120 Rock band concert in front of speakers, thunderclap
140 Gunshot blast, jet plane
180 Rocket launching pad
Information courtesy of the Deafness Research Foundation.
Key Finder
4
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS
ITALIANO NEDERLANDS
Head Unit
Remote Controller
A remote controller that enables remote operation of the head unit is supplied.
Operation is the same as when using buttons on the head unit.
ATT button
This lets you quickly lower volume level (by about 90%).
Press once more to return to the original volume level.
FUNCTION button
SOURCE/OFF button
BAND button
5/ buttons
2/3 buttons
AUDIO button
PGM button
Raise or lower the volume.
+/– button
5//2/3 buttons
SOURCE/OFF button
+/– button
AUDIO button
PTY button
Buttons 1–6
RT button
PGM button
FUNCTION button
EQ selector
DISPLAY button
ENTERTAINMENT button
EJECT button
BAND button
RESET button
5
Before Using This Product
About This Product
The tuner frequencies on this product are allocated for use in North America. Use in other
areas may result in improper reception.
About This Manual
This product features a number of sophisticated functions ensuring superior reception and
operation. All are designed for the easiest possible use, but many are not self-explanatory.
This operation manual is intended to help you benefit fully from their potential and to
maximize your listening enjoyment.
We recommend that you familiarize yourself with the functions and their operation by
reading through the manual before you begin using this product. It is especially important
that you read and observe the “Precaution” on page 10 and in other sections.
This manual explains head unit operation. You can perform the same operations with the
remote controller. The remote controller offers the convenience of ATT, a function not
provided on the head unit.
Important
The serial number of this device is located on the bottom of this product. For your own
security and convenience, be sure to record this number on the enclosed warranty card.
Resetting the Microprocessor
The microprocessor must be reset under the following conditions:
When using this product for the first time after installation.
When the machine fails to operate properly.
When strange (incorrect) messages appear on the display.
To reset the microprocessor, press the RESET button on the head unit with a
pen tip or other pointed instrument.
6
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS
ITALIANO NEDERLANDS
About the Demo Mode
This product features two demonstration modes. One is the Reverse Demo mode, the other
is the Feature Demo mode.
Reverse Demo
If you do not perform an operation within about 30 seconds, screen indications start to
reverse, and then continue reversing every 10 seconds. Pressing button 5 when power to
this product is switched OFF while the ignition switch is set to ACC or ON cancels the
Reverse Demo mode. Pressing button 5 again to start the Reverse Mode.
Feature Demo
The Feature Demo automatically starts when power to this product is switched OFF while
the ignition switch is set to ACC or ON. Pressing button 6 during Feature Demo operation
cancels the Feature Demo mode. Pressing button 6 again to start the Feature Mode.
Remember that if the Feature Demo continues operating when the car engine is switched
OFF, it may drain battery power.
Note:
You cannot cancel a Demo mode when the front panel is open.
The red lead (ACC) of this product should be connected to a terminal coupled with ignition switch
ON/OFF operations. If this is not done, the vehicle battery may be drained.
7
Before Using This Product
When using the DAB (Digital Audio Broadcasting) Tuner
You can use this product with a separately sold hide-away DAB tuner (GEX-P900DAB,
GEX-P900DABII) in Canada. For details concerning operation, refer to the DAB Tuner’s
Operation Manuals.
This section provides information on DAB operations with this product which differs from
that described in the DAB Tuner’s Operation Manual.
About This Product’s Indications
The following is an explanation of this product’s indications.
7 Indications that light when Function is switched ON
Indicator Function
LANG Language Filter (Language Filter)
WTHR* Area Weather Flash (Weather)
ANNC* Announce (Announce)
NEWS* News Flash (News)
TRFC* Road Traffic Flash or Transport Flash
* If the set Announcement Support is received, the icon on the right lights.
7 DAB Status Indications
Indicator Status
EXTRA The currently received Service has a Secondary Service Component.
TEXT The currently received Service has a Dynamic Label.
DAB When DAB reception is possible.
“DAB” “WTHR” “ANNC” “NEWS” “TRFC”
“LANG” “EXTRA”“TEXT”
Operation
With this product, operation of the following five functions differs. (Reference pages are in
the Hide-away DAB Tuner’s Operation Manual.)
Changing the Label (Refer to page 12.)
Changing Display Indications (Refer to page 13.)
Switch Announcements ON/OFF (Refer to page 17.)
Searching the PTY (Refer to page 20.)
Service List Function (Newly equipped for this product)
7 Changing the Label
Each press of the DISPLAY button changes the display in the following order:
Service Component Label (Service) = Dynamic Label (Text)
= Ensemble Label (Ensemble) = Service Label
Note:
With a Service Component that has no Service Component Label or Dynamic Label, switching to
Service Component Label and Dynamic Label is not possible. With displays other than Service
Label, if you do not perform an operation within 8 seconds or press a button other than the
DISPLAY button, the display returns to Service Label Indicators.
7 Changing Display Indications
This product doesn’t have this function.
7 Switch Announcements ON/OFF
With this product, you can switch announcements ON/OFF in the Function Menu or by
pressing the PTY button.
In the Function Menu, each time you press the 2/3 button at step 2, the mode changes as
follows:
News Flash (News) = Area Weather Flash (Weather) = Announce (Announce)
Note:
The Announce mode (Announce) unifies three modes such as Warning/Service, Event Flash and
Special Event.
The next announcement switches ON/OFF each time you press the PTY button.
Road Traffic Flash
Transport Flash
Note:
When ON, the “TRFC” indicator lights.
To cancel a Road Traffic Flash or Transport Flash interruption and return to the original source,
press the PTY button during an announcement interruption.
7 Searching the PTY
Select the PTY Search setting mode at step 1 with the PTY button.
(You cannot switch to this mode in the Function Menu.)
8
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS
ITALIANO NEDERLANDS
9
Before Using This Product
7 Service List Function
This product is also equipped with the Service List Function in the Function Menu. It is
possible to select the desired Service among the memorized Services in the Service List.
Function Menu Functions appear on the display in the following order:
Service List (SRVC. List) = Language Filter (Language Filter) = Announcement
Support (Announcement Support) = Service Follow (Service Follow) = Service
Component (Primary/Secondary) = Dynamic Label (DAB Text)
Note:
You can also select and recall the desired Service directly with the 1 to 6 buttons.
3. Recall the selected Service with
the 5 button.
2. Select the desired Service with
the 2/3 buttons.
1. Press the FUNCTION button and select the Service List mode (SRVC.
List) in the Function Menu.
Precaution
Keep this manual handy as a reference for operating procedures and precautions.
Always keep the volume low enough for outside sounds to be audible.
Protect the product from moisture.
If the battery is disconnected, the preset memory will be erased and must be repro-
grammed.
After-sales Service for Pioneer Products
Please contact the dealer or distributor from where you purchased the product for its after-
sales service (including warranty conditions) or any other information. In case the necessary
information is not available, please contact the companies listed below:
Please do not ship your product to the companies at the addresses listed below for repair
without advance contact.
For warranty information please see the Limited Warranty sheet included with your product.
10
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS
ITALIANO NEDERLANDS
CAUTION: USE OF CONTROL OR ADJUSTMENT OR PERFOR-
MANCE OF PROCEDURES OTHER THAN THOSE SPEC-
IFIED HEREIN MAY RESULT IN HAZARDOUS RADIA-
TION EXPOSURE.
CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS
PRODUCT WILL INCREASE EYE HAZARD.
7 U.S.A.
Pioneer Electronics Service, Inc.
CUSTOMER SERVICE
DEPARTMENT
P.O. Box 1760
Long Beach, CA 90801
800-421-1404
7 CANADA
Pioneer Electronics of Canada, Inc.
CUSTOMER SERVICE DEPARTMENT
300 Allstate Parkway
Markham, Ontario L3R 0P2
(905) 479-4411
1-877-283-5901
11
Remote Controller and Care
Using the Remote Controller
This product is equipped with a remote controller for convenient operation.
Point the remote controller in the direction of the front panel to operate.
When the remote controller is not in use, attach it firmly to the provided Mounting base.
Precaution:
Do not store the remote controller in high temperatures or direct sunlight.
The remote controller may not function properly in direct sunlight.
Do not let the remote controller fall onto the floor, where it may become jammed under the brake or
accelerator pedal.
If you press the FUNCTION button on the remote controller while pressing the BAND button on it,
the remote controller will not function properly. To cancel this setting, press the AUDIO button on
the remote controller while pressing the BAND button on it to return to the previous setting.
12
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS
ITALIANO NEDERLANDS
Batteries
Remove the cover on the back of the remote controller and insert the batter-
ies with the (+) and (–) poles pointing in the proper direction.
Precaution:
Use only AAA or IEC R03 1.5 V batteries.
Remove the batteries if the remote controller is not used for a month or longer.
Do not attempt to recharge the supplied batteries.
Do not mix new and used batteries.
If the event of battery leakage, wipe the remote controller completely clean and install new
batteries.
13
Basic Operation
To Listen to Music
The following explains the initial operations required before you can listen to music.
Note:
Loading a disc in this product. (Refer to page 15.)
1. Select the desired source (e.g. Tuner).
Each press of the SOURCE/OFF button selects the desired source in the following order:
Built-in CD player (Compact Disc) = TV (Television) = Tuner = DAB (Digital Audio
Broadcasting) Tuner = Multi-CD player = External Unit = AUX
Note:
External Unit refers to a Pioneer product (such as one available in the future) that, although incom-
patible as a source, enables control of basic functions by this product. Only one External Unit can
be controlled by this product.
In the following cases, the sound source will not change:
* When a product corresponding to each source is not connected to this product.
* No disc is set in this product.
* No magazine is set in the Multi-CD player.
* AUX (external input) is set to OFF. (Refer to page 61.)
When this product’s blue/white lead is connected to the car’s Auto-antenna relay control terminal,
the car’s Auto-antenna extends when this product’s source is switched ON. To retract the antenna,
switch the source OFF.
2. Raise or lower the volume.
3. Turn the source OFF.
Hold for 1 second
Each press changes the Source ...
14
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS
ITALIANO NEDERLANDS
Basic Operation of Tuner
Preset Tuning
You can memorize broadcast stations in buttons
1 through 6 for easy, one-touch station recall.
Preset station recall 2 seconds or less
Broadcast station preset memory 2 seconds or more
Note:
Up to 18 FM stations (6 in FM-1, FM-2 and FM-3) and 6 AM
stations can be stored in memory.
You can also use the 5 or buttons to recall broadcast
stations memorized in buttons 1 through 6.
Preset Number Indicator
Frequency Indicator
Band
FM-1 = FM-2 = FM-3
= AM
Band Indicator
Manual and Seek Tuning
You can select the tuning method by changing the length of time you
press the 2/3 button.
Manual Tuning (step by step) 0.5 seconds or less
Seek Tuning 0.5 seconds or more
Note:
If you continue pressing the button for longer than 0.5 seconds, you can skip broadcast
stations. Seek Tuning starts as soon as you release the button.
Stereo indicator “ ” lights when a stereo station is selected.
15
Basic Operation
Basic Operation of Built-in CD Player
Play Time Indicator
Track Number Indicator
Switching the Display
Each press of the DISPLAY button changes
the display in the following order:
Playback mode (Play Time)
= Disc Title
Note:
If you switch a display when the disc title has
not been input, “No Title” is displayed.
Eject
Press the EJECT button, and
you can open the front panel
before ejection.
In case of opening the front
panel, you can just eject a CD.
Note:
The CD function can be turned
ON/OFF with the disc remain-
ing in this product. (Refer to
page 13.)
A disc left partially inserted
after ejection may incur dam-
age or fall out.
Switching the Display (only for CD TEXT Discs)
Each press of the DISPLAY button changes the display in the following order:
Playback mode (Play Time) = Disc Title = Disc Artist = Track Title = Track Artist
With text longer than 20 letters, you can scroll to see the rest of the text by pressing the
DISPLAY button for 2 seconds.
Note:
A CD TEXT disc is a CD featuring recorded text information such as Disc Title, Artist
Name and Track Title.
If certain text information is not recorded on a CD TEXT disc, “No ~” (e.g. “No Title”) is
displayed.
WARNING:
Do not use with the front panel left open. If you do leave it open,
it may result in injury in the event of an accident.
16
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS
ITALIANO NEDERLANDS
Track Search and Fast Forward/Reverse
You can select between Track Search or Fast Forward/Reverse by pressing
the 2/3 button for a different length of time.
Track Search 0.5 seconds or less
Fast Forward/Reverse Continue pressing
Disc Loading Slot
If a CD is inserted, the front panel is closed automatically.
The Built-in CD player plays one standard 12 cm or 8 cm
(single) CD at a time. Do not use an adapter when playing
8 cm CD.
Note:
If a disc cannot be inserted fully or playback fails, make sure the
recorded side is down. Push the EJECT button and check the
disc for damage before reinserting it.
If the Built-in CD player cannot operate properly, an error mes-
sage (such as “ERROR-14”) appears on the display. Refer to
“Built-in CD Player’s Error Message” on page 77.
Open
Press the EJECT button for 1 second, and you can open the front
panel without ejecting a CD.
In case of opening the front panel, you can close it.
Note:
When opening the front panel, the 1 to 6 buttons are not available.
Switching the Display
Each press of the DISPLAY
button changes the display in
the following order:
Playback mode (Play Time)
= Disc Title
Note:
If you switch displays when
disc titles have not been input,
“No Title” is displayed.
17
Basic Operation
Basic Operation of Multi-CD Player
This product can control a Multi-CD player (sold separately).
Track Search and Fast Forward/Reverse
You can select between Track Search or Fast
Forward/Reverse by pressing the 2/3 button
for a different length of time.
Track Search 0.5 seconds or less
Fast Forward/Reverse Continue pressing
Play Time Indicator
Disc Search
Disc Number Indicator
Track Number Indicator
Switching the Display (When playing a CD TEXT disc on a CD TEXT compatible
Multi-CD Player)
Each press of the DISPLAY button changes the display in the following order:
Playback mode (Play Time) = Disc Title = Disc Artist = Track Title = Track Artist
With text longer than 20 letters, you can scroll to see the rest of the text by pressing the
DISPLAY button for 2 seconds.
Note:
A CD TEXT disc is a CD featuring recorded text information such as Disc Title, Artist Name
and Track Title.
If certain text information is not recorded on a CD TEXT disc, “No ~” (e.g. “No Title”) is
displayed.
You cannot switch to the Disc Title Input mode in the Detailed Setting Menu.
18
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS
ITALIANO NEDERLANDS
Disc Number Search (for 6-Disc, 12-Disc types)
You can select discs directly with the 1 to 6 buttons. Just press the number
corresponding to the disc you want to listen to.
Note:
When a 12-Disc Multi-CD Player is connected and you want to select disc 7 to 12, press the 1 to 6
buttons for 2 seconds.
Disc Number Rough Search (for 50-Disc type only)
This handy function lets you select discs loaded in a 50-Disc Multi-CD Player using the 1
to 5 buttons. The 50 discs are divided into five blocks, with each of the 1 to 5 buttons
assigned to a block.
Select the desired block with the 1 to 5 buttons.
Note:
After completing a rough search, use the 5 and buttons to select a desired disc.
Note:
The Multi-CD player may perform a preparatory operation, such as verifying the presence of a disc
or reading disc information, when the power is turned ON or a new disc is selected for playback.
“READY” is displayed.
When a magazine is loaded into a 50-Disc type Multi-CD Player, information on all the discs in
the magazine is read.
If you start playing a disc on a 50-Disc type Multi-CD Player before reading of information on all
discs has been completed, reading of information stops part way through. This will prevent you
from using the ITS function. (If you try and use this function, “Not Ready” is displayed.)
If this happens, reading of information begins again when you switch to a component other than
the 50-Disc Type Multi-CD Player.
If the Multi-CD player cannot operate properly, an error message such as “ERROR-14” is dis-
played. Refer to the Multi-CD Player Owner’s Manual.
If there are no discs in the Multi-CD player magazine, “No Disc” is displayed.
“LOADING” will be displayed in the following cases:
* If the disc in the extra tray is selected.
* If the disc is moved from the extra tray to the magazine.
(Refer to the 50-Disc Type Multi-CD Player Owner’s Manual.)
You cannot use the “Ejecting a Single Disc”, “Frequency Play”, “Music Group Play” or “ABC
Disc Title Search” functions with this product.
19
Basic Operation
Corresponding Display Indications and Buttons
This product’s display features Key Guidance Indicators. These light to indicate which of
the 5//2/3 buttons you can use. When you’re in the Function Menu (refer to next sec-
tion), Detailed Setting Menu (refer to page 22), Initial Setting Menu (refer to page 59) or
Audio Menu 1, 2 (refer to pages 42 and 48), they also make it easy to see which 5//2/3
buttons you can use to switch functions ON/OFF, switch repeat selections and perform
other operations.
Indicator and corresponding buttons are shown below.
7 Head Unit 7 Remote Controller 7 Display
When 1 is lit in the display, perform appropriate operations with the z buttons.
Entering the Function Menu
The Function Menu lets you operate simple functions for each source.
Note:
After entering the Function Menu, if you do not perform an operation within about 30 seconds, the
Function Menu is automatically canceled.
1. Select the desired mode in the Function Menu. (Refer to next section,
“Function Menu Functions”.)
Each press changes the Mode ...
z
1
z
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160

Pioneer DEH-P920R Le manuel du propriétaire

Catégorie
Lecteur CD
Taper
Le manuel du propriétaire

dans d''autres langues