Siemens HQ738356M Manuel utilisateur

Catégorie
Fours
Taper
Manuel utilisateur
iemens-home.com/welcome
Register
your
product
online
siemens-home.com/welcome
Free standing cooker
Cuisinière
HQ738356M
[en] Instruction manual . . . . . . . . . . . . . 3
[fr] Notice d’utilisation . . . . . . . . . . . . . 18
[ar]
π≤à°ùªdG óbƒªdG
ɪ©à°S’G π«dO
. . . . . . . . . . . . . . . . . . 3
3
Ú Table of contents
[en]Instruction manual
Important safety information.....................................................4
Causes of damage .............................................................................6
Your new appliance....................................................................7
The control panel................................................................................7
The hob.................................................................................................8
The oven...............................................................................................8
Cooling fan...........................................................................................8
Accessories .........................................................................................9
Optional accessories .........................................................................9
Before using the oven for the first time..................................10
Setting the clock ..............................................................................10
Baking out the oven ........................................................................10
Cleaning the burner caps and cups ............................................ 10
Cleaning the accessories............................................................... 10
Operating the hob ....................................................................10
Switching on the gas burner.......................................................... 10
How to operate your oven........................................................11
Oven lighting..................................................................................... 11
Operating modes............................................................................. 11
Operating the oven.......................................................................... 11
Operating the rotary spit................................................................. 11
Setting the time-setting options..............................................12
Timer ..................................................................................................12
Cooking time ....................................................................................12
End time.............................................................................................13
Clock .................................................................................................. 14
Childproof lock .........................................................................14
Changing the basic settings ...................................................14
Care and cleaning ....................................................................14
Cleaning agents ...............................................................................15
Catalytic cooking compartment panels....................................... 15
Removing and fitting the appliance door....................................16
Removing and inserting the hook-in racks ................................. 16
Troubleshooting .......................................................................17
Error messages................................................................................17
Replacing the oven light bulb........................................................ 17
After-sales service ...................................................................18
Energy and environment tips..................................................18
Saving energy with your oven ....................................................... 18
Saving energy with the hob ........................................................... 18
Environmentally-friendly disposal.................................................. 18
Produktinfo
Additional information on products, accessories, replacement
parts and services can be found at
www.siemens-home.com and in the online shop
www.siemens-eshop.com
4
: Important safety information
Read these instructions carefully. Only then
will you be able to operate your appliance
safely and correctly. Retain the instruction
manual and installation instructions for
future use or for subsequent owners.
Check the appliance for damage after
unpacking it. Do not connect the appliance
if it has been damaged in transport.
Only allow a licensed professional to
connect the appliance. Damage caused by
incorrect connection is not covered under
warranty. Call the after-sales service if you
want to convert your appliance to a different
type of gas.
This appliance is intended for domestic use
and the household environment only. This
appliance must only be used to prepare
food and drinks and must never be used as
a heater. Do not leave the appliance
unattended during operation. Only use the
appliance indoors.
This appliance is intended for use up to a
maximum height of 2000 metres above sea
level.
This appliance is not intended for operation
with an external clock timer or a remote
control.
Always slide accessories into the cooking
compartment correctly. See "Description of
accessories in the instruction manual.
Close the safety valve on the gas supply
line if the cooker will not be used for a
prolonged period.
WHAT TO DO IF YOU SMELL GAS!
Escaping gas may cause an explosion.
If you smell gas or notice any faults in the
gas installation:
Immediately shut off the gas supply or
close the gas cylinder valve.
Immediately extinguish all naked flames
and cigarettes.
Do not use any light or appliance switches
and do not pull any plugs out of sockets.
Do not use any telephones or mobile
phones within the building.
Open windows and ventilate the room.
Call the aftersales service or the gas
supplier.
Risk of asphyxiation!
The use of a gas cooker leads to a build-up
of heat, moisture and products of
combustion in the room where the
appliance is installed. Ensure that the
installation room is well ventilated. The
natural ventilation openings must be kept
open or a mechanical ventilation device
must be provided (e.g. an extractor hood).
Intensive and persistent use of the
appliance may mean that it is necessary to
have additional ventilation (e.g. opening a
window), or more effective ventilation (e.g.
operating the existing mechanical
ventilation device at a higher setting).
Risk of fire!
A draught is created when the appliance
door is opened. Greaseproof paper may
come into contact with the heating
element and catch fire. Do not place
greaseproof paper loosely over
accessories during preheating. Always
weight down the greaseproof paper with a
dish or a baking tin. Only cover the
surface required with greaseproof paper.
Greaseproof paper must not protrude over
the accessories.
Risk of fire!
Combustible objects that are left in the
cooking compartment may ignite. Never
store combustible items in the cooking
compartment. Never open the appliance
door if there is smoke inside. Switch off
the appliance and unplug the mains plug
or switch off the fuse in the fuse box. Shut
off the gas supply.
Risk of fire!
Hot oil and fat can ignite very quickly.
Never leave hot fat or oil unattended.
Never use water to put out burning oil or
fat. Switch off the hotplate. Extinguish
flames carefully using a lid, fire blanket or
something similar.
Risk of fire!
The hotplates become very hot. Never
place combustible items on the hob.
Never place objects on the hob.
Risk of fire!
The appliance becomes very hot and
flammable materials could catch fire.
Never store or use flammable
objects (e.g. spray cans, cleaning agents)
under the appliance or in its immediate
vicinity. Never place flammable items on
or in the appliance.
Risk of fire!
5
When gas hotplates are in operation
without any cookware placed on them,
they can build up a lot of heat. The
appliance and the extractor hood above it
may become damaged or be set on fire.
Grease residue in the filter of the extractor
hood may ignite. Only operate the gas
burners with cookware on them.
Risk of fire!
The rear of the appliance becomes very
hot. This may cause damage to the power
cables. Electricity and gas lines must not
come into contact with the rear of the
appliance.
Risk of burns!
The appliance becomes very hot. Never
touch the interior surfaces of the cooking
compartment or the heating elements.
Always allow the appliance to cool down.
Keep children at a safe distance.
Risk of serious burns!
Accessories and ovenware become very
hot. Always use oven gloves to remove
accessories or ovenware from the cooking
compartment.
Risk of burns!
Alcoholic vapours may catch fire in the hot
cooking compartment. Never prepare food
containing large quantities of drinks with a
high alcohol content. Only use small
quantities of drinks with a high alcohol
content. Open the appliance door with
care.
Risk of burns!
The hotplates and surrounding area
(particularly the hob surround, if fitted)
become very hot. Never touch the hot
surfaces. Keep children at a safe distance.
Risk of burns!
The accessible parts become very hot
when in operation. Never touch hot parts.
Keep children at a safe distance.
Risk of burns!
Empty cookware becomes extremely hot
when set on a gas hotplate that is in
operation. Never heat up empty cookware.
Risk of scalding!
The accessible parts become hot during
operation. Never touch the hot parts. Keep
children at a safe distance.
Risk of scalding!
When you open the appliance door, hot
steam may escape. Open the appliance
door with care. Keep children at a safe
distance.
Risk of scalding!
Water in a hot cooking compartment may
create hot steam. Never pour water into
the hot cooking compartment.
Risk of injury!
Scratched glass in the appliance door
may develop into a crack. Do not use a
glass scraper, sharp or abrasive cleaning
aids or detergents.
Risk of injury!
Incorrect repairs are dangerous. Repairs
may only be carried out, and damaged
power and gas lines replaced, by an after-
sales engineer trained by us. If the
appliance is faulty, unplug the mains plug
or switch off the fuse in the fuse box. Shut
off the gas supply. Contact the after-sales
service.
Risk of injury!
Faults or damage to the appliance are
dangerous. Never switch on a faulty
appliance. Unplug the appliance from the
mains or switch off the circuit breaker in
the fuse box. Shut off the gas supply.
Contact the after-sales service.
Risk of injury!
Unsuitable pan sizes, damaged or
incorrectly positioned pans can cause
serious injury. Observe the instructions
which accompany the cookware.
Risk of injury!
The glass cover may crack. Never close
the glass hob cover if a burner is switched
on or the burner is still warm. Remove any
spills before opening the hob cover.
Risk of injury!
If the appliance is placed on a base and is
not secured, it may slide off the base. The
appliance must be fixed to the base.
Risk of tipping!
Warning: In order to prevent tipping of the
appliance, this stabilizing means must be
installed. Refer to the instructions for
installation.
6
Risk of electric shock and serious injury!
The cable insulation on electrical
appliances may melt when touching hot
parts of the appliance. Never bring
electrical appliance cables into contact
with hot parts of the appliance.
Risk of electric shock!
Do not use any high-pressure cleaners or
steam cleaners, which can result in an
electric shock.
Risk of electric shock!
When replacing the cooking compartment
bulb, the bulb socket contacts are live.
Before replacing the bulb, unplug the
appliance from the mains or switch off the
circuit breaker in the fuse box.
Causes of damage
Hob
Caution!
Only use the burners when cookware has been placed on
top. Do not heat up empty pots or pans. The saucepan base
will be damaged.
Clear up spills immediately. Use deep pots for dishes with a
lot of liquid. This will prevent the food from boiling over.
Do not use roasting dishes if they must be heated using two
burners. This will cause heat accumulation. The appliance
could be damaged.
Cooking on gas burners releases extra heat and moisture.
Adjacent units may become damaged over time. For long
cooking times, switch on the cooker hood or ventilate the
room.
Observe the manufacturer's instructions when using special
ovenware.Aluminium foil and plastic containers can melt and
stick on hot burners.
Place the pot or pan centrally over the burner. This will
optimise transfer of the heat from the burner flame to the pot
or ban base. The handle does not become damaged, and
greater energy savings are guaranteed.
Ensure that the gas burners are clean and dry. The burner
cup and ¶burner cap must be positioned exactly.
Ensure that the hotplate/burner is never switched on when
the hob cover is on, e.g. by children playing.
Oven
Caution!
Accessories, foil, greaseproof paper or ovenware on the
cooking compartment floor: do not place accessories on the
cooking compartment floor. Do not cover the cooking
compartment floor with any sort of foil or greaseproof paper.
Do not place ovenware on the cooking compartment floor.
This will cause heat accumulation. The baking and roasting
times will no longer be correct and the enamel will be
damaged.
Inserting accessories: depending on the appliance model,
accessories can scratch the door panel when closing the
appliance door. Always insert the accessories into the
cooking compartment as far as they will go.
Water in a hot cooking compartment: do not pour water into
the cooking compartment when it is hot. This will cause
steam. The temperature change can cause damage to the
enamel.
Moist food: do not store moist food in the cooking
compartment when it is closed for prolonged periods This will
damage the enamel.
Fruit juice: when baking particularly juicy fruit pies, do not
pack the baking tray too generously. Fruit juice dripping from
the baking tray leaves stains that cannot be removed. If
possible, use the deeper universal pan.
Cooling with the appliance door open: only allow the cooking
compartment to cool when it is closed. Even if the appliance
door is only open a little, front panels of adjacent units could
be damaged over time.
Heavily soiled oven seal: if the oven seal is heavily soiled, the
oven door will no longer close properly when the oven is in
operation. The fronts of adjacent units could be damaged.
Always keep the oven seal clean.
Oven door as a bearing surface: do not stand or place
objects on the oven door when it is open. Do not hang
objects on the oven door.
Carrying the appliance: do not carry or hold the appliance by
the door handle. The door handle cannot support the weight
of the appliance and could break.
Heavy accessories: do not pull out heavily laden accessories
too far without first unloading them sufficiently. Heavy
accessories will tip when pulled out. This causes pressure to
be exerted on the shelf supports in the cooking compartment,
which can damage the enamel. Relieve the strain on the
accessories when they are pulled out by raising them slightly
with one hand. Caution: always use an oven cloth or oven
gloves when handling hot accessories.
Storage compartment
Caution!
Do not place hot objects in the storage compartment. It could
be damaged.
7
Your new appliance
Get to know your appliance. You will find information about the
control panel and hob, as well as the oven, types of heating
and accessories.
Depending on the appliance model, individual details may
differ.
The control panel
Explanation
1 Hob cover
2 Hob
3 Control panel
4 Oven
5 Storage compartment
Explanation
1 Control knob for oven temperature
2 Oven indicator light
3 Buttons and display
4 Control knob for oven functions
5 Control knob for hotplates
8
The hob
Types of gas burner
Control knob for hotplates
This control knob is used to adjust the heat setting of the gas
burner hotplates.
The symbols above the control knob show you the gas burner
to which the control knob belongs.
The oven
In order to operate the oven, you require two operating knobs:
The function selector and the temperature selector.
Control knob for oven
Function selector
Set the operating mode using the function selector.
Temperature selector
Set the temperature using the temperature selector.
There is a limit stop between settings 260 and 0. Do not turn
the knob beyond this point.
Cooling fan
The cooling fan switches on and off as required. The hot air
escapes above the door. Caution: Do not cover the ventilation
slots. Otherwise the oven will overheat.
So that the cooking compartment cools down more quickly
after operation, the cooling fan continues to run for a certain
period afterwards.
Explanation
1 High output burner (3.0 kW)
2 Wok burner (3.9 kW)
3 Standard burner (1.8 kW)
4 Economy burner (1.0 kW)
Gas burners Pot/pan diameter
Economy burner 12 - 14 cm
Standard burner 16 - 22 cm
High output
burner
18 - 26 cm
Wok burner 18 - 26 cm
Setting Meaning
Ú
Off
˜
Large flame, highest power
Economy flame, lowest power
Symbol Meaning
0 Off position
%
Top/bottom heating*
$
Bottom heating
G
Grill/rotary spit
(
Full-surface grill
4
Hot air grill
2
Top/bottom heating and hot air
:
Hot air
?
Defrost setting
* Type of heating used to determine the energy efficiency class
in accordance with EN50304.
Setting Meaning
0 Off
50 - 260 Temperature range in °C
9
Accessories
The accessories can be inserted into the cooking compartment
at 4 different levels. Always insert them as far as they will go so
that the accessories do not touch the door panel. Ensure that
the accessories have always been inserted into the cooking
compartment correctly.
The pull-out rails allow you to pull accessories out completely.
When inserting the adapter for the baking and roasting shelf,
ensure that it latches into place behind the indentation on the
pull-out rails
: Risk of fire!
Under no circumstances should a baking sheet, a baking tray,
a pan or another form of cookware be placed directly on the
oven floor. This causes the floor of the appliance to overheat
and can seriously damage the bottom of the fitted unit.
You can pull out the accessories two thirds of the way without
them tipping. This allows dishes to be removed easily.
The accessories may become deformed when they become
hot. As soon as they have cooled down, the deformation
disappears with no effect on the function.
You can buy accessories from the after-sales service, from
specialist retailers or online.
--------
Optional accessories
You can buy accessories from the after-sales service, from
specialist retailers or online.
--------
Accessories Description
Baking and roasting wire rack
For ovenware, cake tins, joints,
grilled items, frozen meals.
Enamelled baking tray
For moist cakes, pastries, frozen
meals and large roasts. Can also
be used as a drip tray to collect
dripping fat.
Support for baking tray
The baking tray can be inserted
into the oven with this support.
Espresso attachment
Attachment for an espresso pot,
for placing on the economy
burner.
Rotary spit
With rotary spit support and metal
hook
For roasts and large pieces of
poultry. Only use in combination
with the enamelled baking tray.
Locking pins
For locking the hinges.
Accessories Description
Pressure regulator Pressure regulator for liquefied
gas.
Customer service number:
752313
Wok ring Attachment for a wok, for placing
on the wok burner.
When using the wok attachment, it
is possible to use cooking contain-
ers with a diameter greater than
26 cm (woks, frying pans, pots,
containers with a curved base,
etc.).
Customer service number:
750290
10
Before using the oven for the first time
In this section, you can find out what you must do before using
your appliance to prepare food for the first time. Read the
Safety information section beforehand.
Remove the appliance packaging and dispose of it
appropriately.
Setting the clock
After the appliance has been connected, the 0 symbol and
three zeros flash in the display. Set the clock.
1. Press the 0 button.
The clock in the display shows 12:00. The time symbols light
up and the
N arrow is next to 0.
2. Use the @ or A button to set the clock.
After a few seconds, the time that has been set is adopted.
Baking out the oven
Precleaning the oven
1. Remove accessories and hook-in racks from the cooking
compartment.
2. Fully remove any remaining packaging, such as small pieces
of polystyrene, from the cooking compartment.
3. Some parts are covered with a protective film. Remove the
protective film.
4. Clean the outside of the appliance with a soft, damp cloth.
5. Clean the cooking compartment with hot soapy water.
Heating up the oven
To remove the new cooker smell, heat up the oven when it is
empty and closed.
1. Turn the temperature selector to the maximum temperature.
2. Switch off the oven after 45 minutes.
Recleaning the oven
1. Clean the cooking compartment with hot soapy water.
2. Fit the hook-in racks.
Cleaning the burner caps and cups
1. Clean the burner caps (A) and cups (B) with water and
washing-up liquid.
2. Dry the parts well.
3. Place the burner cup (B) onto the burner (C).
4. Position the burner cap (A) exactly on the burner cup (B).
Cleaning the accessories
Before using the accessories, clean them thoroughly using a
cloth and warm soapy water.
Operating the hob
Notes
Appliances with a hob cover must only be switched on if the
hob cover is open.
The burner caps must always be positioned exactly on top of
the burner cups. The slots on the burner cup must be free
from obstruction. All parts must be dry.
Ensure that the burner is not subjected to draughts caused
by air conditioning systems, fans or similar appliances.
Switching on the gas burner
1. Press the control knob for the required burner and turn it to
the
˜ position.
The gas burner ignites.
2. Keep the control knob pressed for a few seconds until the
flame stabilises.
3. Set the desired flame setting.
The flame is not stable between positions
Ú and ˜. Always
select a position between
˜ and .
If the flame goes out
Switch off the control knob. Wait one minute and switch the
burner on again.
: Risk of fire!
If the flame goes out, gas will escape. Never leave the gas
burner unattended during operation. Ensure that there are no
draughts.
If the gas burner does not ignite
In the event of a power cut or damp ignition plugs, light the gas
burner with a gas lighter or a match.
Switching off the gas burner
Turn the control knob for the required hotplate to the
Ú position.
$
%
&
Setting Meaning
Economy flame, lowest power
˜
Large flame, highest power
11
How to operate your oven
You have the option of adjusting your oven to a range of
different settings. You can control the oven using the electronic
clock.
Oven lighting
Switching on the oven light
Turn the function selector to an operating mode.
The oven light also switches on when the oven door is opened.
Switching off the oven light
Turn the function selector to the off position.
Close the oven door.
Operating modes
The following operating modes are available.
Operating the oven
Switching on the oven
Note: Always keep the appliance door closed when it is in
operation.
1. Turn the function selector to the desired operating mode.
2. Turn the temperature selector to set the desired temperature.
The oven switches on.
The indicator lamp is lit when the oven is heating up. It goes out
during pauses in heating.
Switching off the oven
1. Turn the function selector to the 0 position.
2. Turn the temperature selector to the 0 position.
The oven switches off.
Operating the rotary spit
The rotary spit can be used with excellent results to cook joints,
such as rolled roasting joints and poultry. The meat is roasted
thoroughly and evenly.
The drive for the rotary spit is automatically activated as soon
as you switch on the grill.
Preparing roasts
1. Place the joint as centrally as possible on the rotary spit and
secure it at both ends with the retaining clips.
You can also secure the joint using kitchen twine.
2. With poultry, bind the ends of the wings underneath the back
and the thighs against the body. This prevents them from
overbrowning.
3. Pierce the skin on the underside of the wings to allow the fat
to escape.
Inserting the rotary spit
: Risk of burns!
Never touch the hot surfaces of the cooking compartment or
the heating elements. Children must be kept at a safe distance
from the appliance at all times. Open the appliance door
carefully. Hot steam may escape.
1. Slide the rotary spit shelf halfway in at shelf position 2.
2. Place the rotary spit on the rotary spit shelf and unscrew and
remove the handle.
3. Slide in the rotary spit shelf all the way.
4. Slide the rotary spit to the left into the motor mount.
5. Pour water into a baking tray and slide this into shelf position
1 to collect the dripping fat.
6. Close the appliance door.
Switching on the rotary spit
Turn the control knob for the oven to the
G position.
Note: Grill+ rotisserie cooking must never exceed 240°C.
Switching off the rotary spit
Turn the control knob for the oven to the 0 position.
Operating mode Use
%
Top/bottom heat-
ing*
For sponge cakes in tins, bakes, lean
joints of beef, veal and game.
$
Bottom heating For bain-marie applications such as
crema catalana, or for preserving.
Also improvement setting if the base
is not fully baked through
G
Grill/rotary spit Grill: For individual portions or small
quantities of steaks, sausages, fish
and toast.
Rotary spit: For roasts, rolled joints
and poultry
(
Full-surface grill For several steaks, sausages, fish and
pieces of toast.
4
Hot air grill For poultry and larger pieces of meat
2
Top/bottom heat-
ing and hot air
For cakes with very moist toppings.
:
Hot air For cakes, pizza and items baked on
two levels, for roasting and drying.
?
Defrost setting For defrosting meat, poultry, fish and
pastries.
* Type of heating used to determine the energy efficiency class
in accordance with EN50304.
12
Removing the rotary spit
: Risk of burns!
Never touch the hot surfaces of the cooking compartment or
the heating elements. Children must be kept at a safe distance
from the appliance at all times. Open the appliance door
carefully. Hot steam may escape.
: Risk of burns!
Never touch the rotary spit or other accessories directly when
they are hot. Always wear oven gloves or heat-resistant gloves
when handling hot accessories.
1. Open the appliance door carefully.
2. Using the metal hook, pull the rotary spit to the right out of
the motor mount.
3. Pull the rotary spit shelf halfway out of the oven.
4. Hold the rotary spit in place on the left-hand side with an oven
glove and screw the handle onto the rotary spit.
5. Lift the rotary spit carefully out of the rotary spit shelf.
6. Remove the rotary spit shelf and the baking tray from the
oven.
Setting the time-setting options
Your oven has various time-setting options. You can use the 0
button to call up the menu and switch between the individual
functions. All the time symbols are lit when you can make
settings. The
N arrow shows you the time-setting option that is
active. A time-setting option that has already been set can be
changed direction with the
@ or A button when the N arrow is
next to the relevant time symbol.
Timer
You can use the timer as a kitchen timer. It runs independently
of the oven. The timer has its own signal. In this way, you can
tell whether it is the timer or a cooking time which has elapsed.
1. Press the 0 button once.
The time symbols light up in the display and the
N arrow is
next to
V.
2. Use the @ or A button to set the timer duration.
Default value for
@button = 10 minutes
Default value for
Abutton = 5 minutes
After a few seconds, the time setting is adopted. The timer
starts. The
NV symbol lights up in the display and the timer
duration counts down. The other time symbols go out.
The timer duration has elapsed
A signal sounds. 0:00 is shown in the display. Use the
0
button to switch off the timer.
Changing the timer duration
Use the
@ or A button to change the timer duration. After a few
seconds, the change is adopted.
Cancelling the timer duration
Use the
A button to reset the timer duration to 0:00. The
change will be adopted after a few seconds. The timer is
switched off.
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the
N arrow.
To call up the
V timer, x cooking time, y end time or 0
clock, press the
0 button repeatedly until the N arrow is next
to the relevant symbol. The display shows the value for a few
seconds.
Cooking time
The cooking time for your dish can be set on the oven. When
the cooking time has elapsed, the oven switches itself off
automatically. This means that you do not have to interrupt
other work to switch off the oven. The cooking time cannot be
accidentally exceeded.
Example in the picture: cooking time 45 minutes.
1. Use the function selector to set the type of heating.
2. Set the temperature or grill setting using the temperature
selector.
3. Press the 0 button twice.
0:00 is shown in the display. The time symbols light up and
the
N arrow is next to x.
13
4. Use the @ or A button to set the cooking time.
Default value for
@ button = 30 minutes
Default value for
A button = 10 minutes
The oven will start up after a few seconds. The cooking time
counts down in the display and the
Nx symbol lights up. The
other time symbols go out.
The cooking time has elapsed
A signal sounds. The oven stops heating. 0:00 is shown in the
display. Press the
0 button. You can set a new cooking time
using the
@ or A button. Or press the 0 button twice and turn
the function selector to the off position. The oven switches off.
Changing the cooking time
Use the
@ or A button to change the cooking time. After a few
seconds, the change is adopted. If the timer has been set,
press the
0 button beforehand.
Cancelling the cooking time
Use the
A button to reset the cooking time to 0:00. After a few
seconds, the change is adopted. The cooking time is
cancelled. If the timer has been set, press the
0 button
beforehand.
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the N arrow.
To call up the
V timer, x cooking time, y end time or 0
clock, press the
0 button repeatedly until the N arrow is next
to the relevant symbol. The display shows the value for a few
seconds.
End time
You can change the time at which you wish your dish to be
ready. The oven starts automatically and finishes at the desired
time. You can, for example, put your dish in the cooking
compartment in the morning and set the cooking time so that it
is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
Example in the picture: it is 10:30 am, the cooking time is
45 minutes and the oven is required to finish cooking at
12:30 pm.
1. Adjust the function selector.
2. Set the temperature selector.
3. Press the 0 button twice.
4. Use the @ or A button to set the cooking time.
5. Press the 0 button.
The
N arrow is next to y. The time when the dish will be
ready is displayed.
6. Use the @ or A button to set a later end time.
After a few seconds, the oven adopts the settings and switches
to standby position. The display shows the time at which the
dish will be ready and the
N arrow is next to the y symbol.
The
V and 0 symbols go out. When the oven starts, the
cooking time counts down in the display and the
N arrow is
next to the
x symbol. The y symbol goes out.
The cooking time has elapsed
A signal sounds. The oven stops heating. 0:00 is shown in the
display. Press the
0 button. You can set a new cooking time
using the
@ or A button. Or press the 0 button twice and turn
the function selector to the off position. The oven switches off.
Changing the end time
Use the
@ or A button to change the end time. After a few
seconds, the change is adopted. If the timer has been set, first
press the
0 button twice. Do not change the end time if the
cooking time has already started to elapse. The cooking result
would no longer be correct.
Cancelling the end time
Use the
A button to reset the end time to the current time. After
a few seconds, the change is adopted. The oven starts. If the
timer has been set, first press the
0 button twice.
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the
N arrow.
To call up the
V timer, x cooking time, y end time or 0
clock, press the
0 button repeatedly until the N arrow is next
to the relevant symbol. The display shows the value for a few
seconds.
14
Clock
After connecting the appliance to the mains or after a power
cut, the
0 symbol and three zeros flash in the display. Set the
clock.
1. Press the 0 button.
The clock in the display shows 12:00. The time symbols light
up and the
N arrow is next to 0.
2. Use the @ or A button to set the clock.
After a few seconds, the time that has been set is adopted.
Changing the clock
No other time-setting option should have been set.
1. Press the 0 button four times.
The time symbols light up in the display and the
N arrow is
next to
0.
2. Use the @ or A button to change the clock.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Childproof lock
The oven has a childproof lock to prevent children from
switching it on by accident.
The oven will not respond to any settings.You can still set the
clock and the timer when the childproof lock is activated.
If the type of heating and temperature or grill setting are set, the
childproof lock interrupts the heater element.
Note: If a hob is connected, it will not be affected by the
childproof lock on the oven.
Activating the childproof lock
No cooking time or end time should be set.
Press and hold the
@ button for approx. four seconds.
The
@ symbol appears in the display. The childproof lock is
activated.
Deactivating the childproof lock
Press and hold the
@ button for approx. four seconds.
The
@ symbol goes out in the display. The childproof lock is
deactivated.
Changing the basic settings
Your oven has various basic settings. These settings can be
customised to suit your requirements.
No other time-setting option should have been set.
1. Press and hold the 0 button for approx. 4 seconds.
The current basic setting for the clock display is shown in the
display, e.g. c1 1 for selection 1.
2. Use the @ or A button to change the basic setting.
3. Confirm by pressing the 0 button.
The next basic setting appears in the display. You can scroll
through all levels with the
0 button and change the setting
with the
@ or A button.
4. To finish, press and hold the 0 button for approx. 4 seconds.
All basic settings are applied.
You may change the basic settings at any time.
Care and cleaning
With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
Slight differences in the colours on the front of the oven are
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
: Risk of electric shock!
Do not use any high-pressure cleaners or steam cleaners,
which can result in an electric shock.
: Risk of burns!
The appliance becomes very hot. Never touch the interior
surfaces of the cooking compartment or the heating elements.
Always allow the appliance to cool down. Keep children at a
safe distance.
Basic setting Selection 1 Selection 2 Selection 3
c1 Clock display always* only with
the
0 but-
ton
-
c2 Signal duration
upon completion of
a cooking time or
timer period
approx.
10 seconds
approx.
2 minutes*
approx.
5 minutes
c3 Waiting time until a
setting is applied
approx.
2 seconds
approx.
5 seconds*
approx.
10 seconds
* Factory setting
15
Cleaning agents
Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
Do not use
for the hob
undiluted washing-up liquid or dishwasher detergent
abrasive materials, scouring sponges
aggressive cleaners such as oven spray or stain remover
high-pressure cleaners or steam jet cleaners
Do not use
in the oven
harsh or abrasive cleaning agents
cleaning agents with a high alcohol content
hard scouring pads or cleaning sponges
high-pressure cleaners or steam cleaners.
Wash new sponge cloths thoroughly before use.
Catalytic cooking compartment panels
The catalytic cooking compartment panels are coated with self-
cleaning enamel.
The surfaces clean themselves while the oven is in operation.
Larger splashes will only be removed after the oven has been
used several times.
The rear and side walls are covered with catalytic panelling.
Never clean these surfaces with oven cleaner. Slight
discolouration of the enamel does not affect self-cleaning.
Area Cleaning agents
Appliance exterior Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Do not use glass cleaners or
glass scrapers.
Stainless steel Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Remove traces of limescale,
grease, starch and albumin (e.g. egg
white) immediately. Corrosion can form
under such residues.
Special stainless steel cleaning prod-
ucts suitable for hot surfaces are availa-
ble from our after-sales service or from
specialist retailers. Apply a very thin layer
of the cleaning product with a soft cloth.
Aluminium and
plastic
Glass cleaner:
Clean with a soft cloth.
Gas hob and pan
supports
Hot soapy water.
Use very little water. Water must not be
allowed to enter the appliance through
the base of the burners.
Clean boiled over liquids and spilt food
immediately.
You can remove the pan supports. Do
not clean the pan supports in the dish-
washer.
Gas burners, hot-
plate
Remove the burner cups and caps, clean
them with soapy water.
The gas outlet openings must remain
free from obstruction.
Ignition plugs: small, soft brush.
The gas burners only work properly
when the ignition plugs are clean. Dry all
parts thoroughly. Ensure they are refitted
correctly.
The burner caps are coated in black
enamel. The colour may change over
time. This does not affect their operation.
Do not clean the burner caps in the dish-
washer.
Enamel surfaces
(smooth surfaces)
To facilitate cleaning, you can switch on
the interior lighting and detach the appli-
ance door if necessary. Apply ordinary
washing-up liquid or a vinegar solution
with a soft, damp cloth or chamois
leather; dry with a soft cloth. Loosen
baked-on food residues with a damp
cloth and detergent. We recommend
using oven-cleaning gel for heavy depos-
its of dirt. This can be applied to the
affected area. Leave the cooking com-
partment open after cleaning to allow it
to dry.
Self-cleaning sur-
faces (rough sur-
faces)
Please see the notes in section: Self-
cleaning surfaces
Door panels Glass cleaner:
Clean with a soft cloth. Do not use a
glass scraper.
Glass cover for the
oven light
Hot soapy water:
Clean with a dish cloth.
Seal
Do not remove.
Hot soapy water:
Clean with a dish cloth. Do not scour.
Shelf Hot soapy water:
Soak and clean with a dish cloth or
brush.
Accessories Hot soapy water:
Soak and clean with a dish cloth or
brush.
Area Cleaning agents
16
Removing and fitting the appliance door
You can remove the appliance door to clean it more
thoroughly.
Removing the appliance door
: Risk of injury!
Whenever the hinges are not locked, they snap shut with great
force. When removing the oven door, ensure that the locking
pins are fully inserted into the holes in the hinges.
1. Open the oven door fully.
2. Lock both hinges on the left and right using a locking pin (a).
Note: The locking pins must be fully inserted into the holes in
the hinges.
3. Grip the oven door on either side with both hands and close
the oven door by approx. 30° (b).
4. Raise the oven door slightly and pull it out.
Note: Do not fully close the oven door. The hinges may
become bent and the enamel may be damaged.
Fitting the appliance door
1. Grip the oven door on either side with both hands.
2. Slide the hinges into the slots in the oven (a).
Note: The notch below the hinges must engage into the
frame of the oven (b).
3. Lower the door downwards.
4. Remove the locking pins.
: Risk of injury!
If the oven door falls out accidentally or a hinge snaps shut, do
not reach into the hinge. Call after-sales service.
Removing and inserting the hook-in racks
You can remove the hook-in racks for easier cleaning.
Removing the hook-in racks
1. Unscrew the right and left-hand screws on the hook-in rack.
2. Remove the hook-in rack.
Inserting the hook-in rack
1. Hold the hook-in rack in front of the drill holes in the side
panel.
2. Screw in the hook-in rack tight again using the screws.
DE
ED
17
Troubleshooting
Malfunctions often have simple explanations. Refer to the table
before calling the after-sales service, as you may be able to
remedy the fault yourself.
: Risk of injury!
Incorrect repairs may cause serious hazards. Repairs to the
appliance may only be performed by a qualified technician. If
repairs are required, contact the after-sales service.
Fault table
Error messages
If an error message with appears, press the 0 button. The
message disappears. A time function that has been set is
cleared. If the error message does not disappear, please
contact the after-sales service.
You can take remedial action yourself if the following error
message is displayed.
: Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out by one of our trained after-sales engineers.
Replacing the oven light bulb
If the bulb in the oven light fails, it must be replaced.
Replacement heat-resistant bulbs can be obtained from the
after-sales service or from specialist retailers. Please supply
your appliance's E number and FD number. Do not use any
other type of bulb.
: Risk of electric shock!
When replacing the cooking compartment bulb, the bulb socket
contacts are live. Before replacing the bulb, unplug the
appliance from the mains or switch off the circuit breaker in the
fuse box.
1. Switch off the circuit breaker or unplug the mains plug.
2. Open the appliance door.
3. Place a tea towel in the cold cooking compartment to prevent
damage.
4. Unscrew the glass cover from the defective oven light bulb
inside the cooking compartment.
5. Replace the oven light bulb with a bulb of the same type.
Voltage: 230 V;
Power: 25 W;
Thread: E14;
Temperature resistance: 300°C
6. Screw the glass cover for the oven light back on.
7. Remove the tea towel and switch the circuit breaker back on
or plug in the mains plug.
8. Switch on the oven lighting and check that it is working
properly.
Fault Possible cause Remedy/information
The appliance is not functioning. Faulty fuse Look in the fuse box and check that the fuse
is in working order.
Power cut Check whether the kitchen light works.
0 and zeros flash in the display.
Power cut Reset the clock.
The oven light has failed. Faulty oven light Change the oven light bulb, (see section
"Replacing oven light")
The gas burner does not ignite. Power cut or damp ignition plugs Light the gas burner with a gas lighter or a
match.
The oven does not heat up. Faulty fuse. Check the fuse and replace if necessary.
The function selector has not been set. Set the function selector.
All dishes prepared in the oven burn
within a short period of time.
Faulty thermostat Call the after-sales service.
The door panel steams up when the
oven is hot.
Normal occurrence; caused by the differ-
ence in temperature.
Not possible; this has no effect on oven per-
formance.
Error message Possible cause Remedy/information
“‹‚‚
A button was
depressed for
too long or is
covered up.
Press all buttons individu-
ally. Check whether any but-
tons are jammed, covered
up or soiled.
18
After-sales service
Our after-sales service is there for you if your appliance needs
to be repaired. We will always find the right solution in order to
avoid unnecessary visits from a service technician.
When calling us, please give the product number (E no.) and
the production number (FD no.) so that we can provide you with
the correct advice. The rating plate and the relevant numbers
can be found on the inside of the storage compartment flap.
You can make a note of the numbers of your appliance and the
telephone number of the after-sales service in the space below
to save time should it be required.
Please be aware that a visit by an after-sales engineer will be
charged if a problem turns out to be the result of operator error,
even during the warranty period.
Please find the contact data of all countries in the enclosed
customer service list.
To book an engineer visit and product advice
Rely on the professionalism of the manufacturer. You can
therefore be sure that the repair is carried out by trained service
technicians who carry original spare parts for your appliances.
Energy and environment tips
Here you can find tips on how to save energy when baking and
roasting in the oven and when cooking on the hob, and how to
dispose of your appliance properly.
Saving energy with your oven
Only preheat the oven if this is specified in the recipe or in
the operating instruction tables.
Use dark, black lacquered or enamelled baking tins. They
absorb the heat particularly well.
Open the oven door as infrequently as possible while
cooking, baking or roasting.
It is best to bake more than one cake, one after the other.
The oven is still warm. This reduces the baking time for the
second cake. You can also place two loaf tins next to each
other.
For longer cooking times, you can switch the oven off
10 minutes before the end of the cooking time and use the
residual heat to finish cooking.
Saving energy with the hob
Always use a saucepan which is the correct size for your
food. A larger, less full saucepan requires a lot of energy.
Always place a suitable lid on the saucepan.
Switch to a lower heat setting in good time.
The gas flame must always be in contact with the base of the
saucepan.
Environmentally-friendly disposal
Dispose of packaging in an environmentally-friendly manner.
E no. FD no.
After-sales serviceO
GB 0344 892 8999
Calls charged at local or mobile rate.
IE 01450 2655
0.03 € per minute at peak. Off peak 0.0088 € per
minute.
This appliance is labelled in accordance with
European Directive 2012/19/EU concerning used
electrical and electronic appliances (waste electrical
and electronic equipment - WEEE). The guideline
determines the framework for the return and recycling
of used appliances as applicable throughout the EU.
19
Þ Table des matières
[fr]Notice dutilisation
Précautions de sécurité importantes .....................................20
Causes de dommages ...................................................................23
Votre nouvel appareil ...............................................................24
Bandeau de commande.................................................................24
Table de cuisson.............................................................................. 25
Le four................................................................................................25
Ventilateur de refroidissement....................................................... 25
Accessoire.........................................................................................26
Accessoire en option ...................................................................... 26
Avant la première utilisation ...................................................27
Réglage de l'heure ..........................................................................27
Chauffe à vide du four .................................................................... 27
Nettoyage des chapeaux et couronnes de brûleurs ................ 27
Nettoyer les accessoires................................................................ 27
Utiliser la table de cuisson ......................................................27
Allumage des brûleurs.................................................................... 27
Voici comment utiliser le four .................................................28
Eclairage............................................................................................ 28
Modes de fonctionnement .............................................................28
Utilisation du four.............................................................................28
Commande du tournebroche ........................................................ 28
Réglage des fonctions de temps ............................................29
Minuterie ............................................................................................ 29
Durée..................................................................................................29
Heure de la fin.................................................................................. 30
Heure..................................................................................................31
Sécurité-enfants .......................................................................31
Modifier les réglages de base .................................................31
Entretien et nettoyage..............................................................32
Nettoyants ......................................................................................... 32
Panneaux catalytiques du compartiment de cuisson............... 33
Décrocher et accrocher la porte de l'appareil ........................... 33
Retrait et montage des grilles supports ...................................... 33
Pannes et dépannage ..............................................................34
Messages d'erreur...........................................................................34
Changer la lampe du four.............................................................. 34
Service après-vente .................................................................35
Conseils concernant l'énergie et l'environnement................35
Économiser de l'énergie dans le four.......................................... 35
Économiser de l'énergie sur la table de cuisson ...................... 35
Elimination écologique....................................................................35
Produktinfo
Vous trouverez des informations supplementaires concernant
les produits, accessoires, pièces de rechange et services sur
Internet sous :
www.siemens-home.com et la boutique en ligne :
www.siemens-eshop.com
20
: Précautions de sécurité importantes
Lire attentivement ce manuel. Ce n'est
qu'alors que vous pourrez utiliser votre
appareil correctement et en toute sécurité.
Conserver la notice d'utilisation et de
montage pour un usage ultérieur ou pour le
propriétaire suivant.
Contrôler l'état de l'appareil après l'avoir
déballé. Ne pas le raccorder s'il présente
des avaries de transport.
Seul un spécialiste agréé est habilité à
raccorder l'appareil. En cas de dommages
dus à un raccordement incorrect, il n'y a
aucun droit à la garantie. Pour la
modification à un autre type de gaz, appeler
le service après-vente.
Cet appareil est destiné exclusivement à
une utilisation domestique et non
professionnelle. Utiliser l'appareil
uniquement pour préparer des mets et des
boissons, ne jamais l'utiliser comme
appareil de chauffage. Surveiller l'appareil
pendant son fonctionnement. Utiliser
l'appareil uniquement à l'intérieur.
Cet appareil est conçu pour une utilisation
jusqu'à une altitude maximale de 2 000 m.
Cet appareil n'est pas conçu pour un
fonctionnement avec une minuterie externe
ou une commande à distance.
Toujours insérer les accessoires à l'endroit
dans le four. Voir la description des
accessoires dans la notice d'utilisation.
Fermer la vanne de sécurité à l'arrivée de
gaz lorsque l'appareil n'est pas utilisé
pendant une longue durée.
COMPORTEMENT EN CAS D'ODEUR DE
GAZ !
Du gaz qui s'échappe peut conduire à une
explosion.
En cas de constatation d'odeur de gaz ou
de dérangements sur l'installation de gaz :
Fermer immédiatement l'arrivée du gaz ou
le robinet de la bouteille de gaz.
Eteindre immédiatement tout feu nu et
cigarettes.
Ne plus actionner les interrupteurs de
lumière et d'appareils, ne pas retirer de
connecteurs de la prise. Ne pas utiliser le
téléphone ou le portable dans la maison.
Ouvrir les fenêtres et aérer en grand la
pièce.
Appeler le service après-vente ou la
société de distribution de gaz.
Risque d'asphyxie !
L'utilisation de l'appareil de cuisson au gaz
conduit à la formation de chaleur,
d'humidité et de produits de combustion
dans la pièce où l'appareil est installé.
Veiller à un bonne aération de la pièce où
l'appareil est installé. Les bouches
d'aération naturelles doivent rester ouvertes
ou il faut prévoir une installation mécanique
de ventilation (p.ex. une hotte). Une
utilisation intensive et de longue durée de
l'appareil peut rendre nécessaire une
aération supplémentaire, p.ex. en ouvrant
une fenêtre, ou une aération plus efficace,
p.ex. faire fonctionner l'installation
mécanique de ventilation à un niveau de
puissance supérieur.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Siemens HQ738356M Manuel utilisateur

Catégorie
Fours
Taper
Manuel utilisateur