Binary B-660-MTRX-4x4 Guide d'installation

Marque: Binary

Modèle: B-660-MTRX-4x4

Catégorie: Commutateurs vidéo

Taper: Guide d'installation

Source | Mute | 2ch

(HDMI Out Audio)

INSTALLATION

MANUAL

4x4 HDMI Matrix with Analog Audio Outputs





To reduce the risk of re or electric shock, read and follow all instrucons and warnings in this

manual. Keep this manual for future reference.

1. Do not expose this apparatus to rain or moisture. Do not expose this equipment to

dripping or splashing, and ensure that no objects lled with liquids, such as vases, are

placed on the equipment. Do not use this apparatus near water.

2. Do not remove cover. No user serviceable parts inside.

3. Clean only with a dry cloth.

4. Do not block any venlaon openings. Install according to manufacturer’s instrucons.

5. Do not install near any heat sources such as radiators, heat registers, stoves or other

apparatus (including ampliers) that produce heat.

6. Do not override the safety purpose of the polarized or grounding plug. A polarized plug

has two blades, one of which is wider than the other. A grounding plug has two matching

blades and a third grounding prong. The wide blade or the third prong is provided for

your safety. If the provided plug does not t into your outlet, consult an electrician for

replacement of the obsolete outlet.

7. Protect the power cord from being walked on or pinched, parcularly at the plug end and

where the power cord is aached to the apparatus.

8. Only use aachments and accessories specied by the manufacturer.

9. Refer all servicing to qualied service personnel. Servicing is required when the apparatus

has been damaged in any way, such as when the power supply cord or plug is damaged,

liquid has been spilled on or objects have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, the apparatus does not operate normally, or it has been

dropped.

10. To completely disconnect this equipment from power, disconnect the power supply cord

from the power outlet.

11. Electrical Disconnect: The source power outlet and power supply input power sockets

should be easily accessible to disconnect power in the event of an electrical hazard or

malfuncon.

12. By means of a power cord connected to a socket-outlet with earthing connecon.

The lightning ash with arrowhead symbol, within

an equilateral triangle, is intended to alert the user

to the presence of uninsulated dangerous voltage

within the product’s enclosure that may be of

sucient magnitude to constute a risk of electric

shock to persons.

The exclamaon point within an equilateral

triangle is intended to alert the user to the

presence of important operang and maintenance

(servicing) instrucons in the literature

accompanying the appliance.

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRICAL SHOCK.

DO NOT REMOVE COVER. NO USER

SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.



1. Cet appareil ne doit pas être exposé à des éclaboussures ou des goues d’eau et aucun

objet rempli de liquide comme un vase ne doit se trouver à proxi mité.

2. N’installez pas cet appareildans un emplacement fermé telqu’une bibliothèque ou un

rack, sauf si cee installaon bénécied’une aéraon adaptée.

3. P Pour éviter tout risque d’incendie ou de déchargeélectrique, ne surchargez pasles

prises de courant des mursou les rallonges.

4. N’installez pas cet appareil àproximité de sources de chaleur,comme des radiateurs,

chauerees, fours ou tout autre appareil (comme des amplicateurs)qui dégagent de la

chaleur.

5. Ne jamais placer d’objetsenammés, tels que des bougiesallumées, sur l’appareil.

6. Neoyez l’appareil àl’aide d’un chion sec.

7. Débranchez cet. appareil pendant lesorages ou au cours des longues périodes de

nonulisaon.

8. Protéger le câble d’alimentaon pour qu’il nesoit pas piéné, coincé ousubisse d’autres

dommages.

9. Ulisez uniquementles accessoires et lematériel de xaon.

10. Conez toutes lesintervenons de dépannage à un personnel technique qualié.

11. La prise de courant source et les prises d’alimentaon d’alimen.taon doivent

êtrefacilement accessibles pourdébrancher l’alimentaon en cas dysfonconnement

électrique.

12. Au moyend’un cordond’alimentaonconnectéà un socle de prises de courant avec

connexion à la terre.

Le ash de foudre avec le symbole de la tête

d’arrow, dans un triangle équiléal, est desné

à alerter l’ulisateur de la présence de tension

dangereuse non isolée dans l’enceinte du produit

qui peut être d’une ampleur susante pour

constuer un risque de choc électrique pour les

personnes.

Le point d’exclamaon dans un triangle équiléal

est desné à alerter l’ulisateur de la présence

importante d’instrucons importantes d’opéra

et d’entreen (d’entreen) dans la liérature

accompagnant l’appareil.

Attention

Attention: Réduire le risque

de choc électrique. Ne

supprimez pas le couvercle,

pas de pièces utilisables par

l’utilisateur à l’intérieur.

Référez l’entretien au

personnel de service qualifié.



1. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

2. Disposal of a baery into re or a hot oven, or mechanically crushing or cung of a

baery, that can result in an explosion.

3. Leaving a baery in an extremely high temperature surrounding environment that can

result in an explosion or the leakage of ammable liquid or gas.

4. A baery subjected to extremely low air pressure that may result in an explosion or the

leakage of ammable liquid or gas.



1. Do not ingest the baery, Chemical burn hazard.

2. (The remote control supplied with) This product contains a coin/buon cell baery.

3. If the coin/buon cell baery is swallowed, It can cause severe internal burns in just 2

hours and can lead to death. Keep new and used baeries away from children. If the

baery compartment does not close seurely, stop using the product and keep it away from

children.

4. If you think baeries might have been swallowed or placed inside any part of the body,

seek immediate medical aenon.



1. RISQUE D’EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UN TYPE INCORRECT.

2. Éliminaon d’une baerie dans le feu ou un four chaud, ou écrasement ou coupe

mécanique d’une baerie, qui peut entraîner une explosion.

3. Laisser une baerie dans un environnement environnant à température extrêmement

élevée qui peut entraîner une explosion ou une fuite de liquide ou de gaz inammable.

4. Une baerie soumise à une pression atmosphérique extrêmement basse qui peut entraîner

une explosion ou une fuite de liquide ou de gaz inammable.



1. Ne pas ingérer la baerie, risque de brûlure chimique.

2. (La télécommande fournie avec) Ce produit conent une baerie de cellules de pièce/

bouton.

3. Si la baerie de la pièce/bouton de cellule est avalée, elle peut causer de graves brûlures

internes en seulement 2 heures et peut entraîner la mort.

4. Gardez les piles neuves et usagées loin des enfants. Si le comparment de la baerie ne se

ferme pas de façon sécure, arrêtez d’uliser le produit et gardez-le à l’écart des enfants.

5. Si vous pensez que des piles ont pu être avalées ou placées à l’intérieur d’une pare

quelconque du corps, consultez immédiatement un médecin.



This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protecon against harmful interference in a residenal installaon. This equipment generates

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instrucons, may cause harmful interference to radio communicaons. However, there

is no guarantee that interference will not occur in a parcular installaon. If this equipment

does cause harmful interference to radio or television recepon, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separaon between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modicaons not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.



Dolby Digital™,Dolby TrueHD™, and Dolby Atmos™ are registered trademarks of Dolby

Laboratories DTS 5.1™, DTS-HD Master Audio™ and DTS:X™ are registered trademarks

of DTS, Inc. All other trademarks and registered trademarks are owned by their respecve

holders.



1. Product Overview ........................................................................................................................................ 8

2. Features ........................................................................................................................................................... 8

3. Package Contents .......................................................................................................................................... 8

4. Device Layout ................................................................................................................................................ 9

4.1. B-660-MTRX-4x4 Front Panel .......................................................................................................... 9

4.2. B-660-MTRX-4x4 Rear Panel ........................................................................................................... 9

5. Installaon & Wiring ...................................................................................................................................10

5.1. Installaon ...........................................................................................................................................10

5.2. Wiring ...................................................................................................................................................11

6. IR Remote Control .......................................................................................................................................12

7. RS-232 Control ............................................................................................................................................13

8. Web UI Control ............................................................................................................................................14

8.1. Get Access to the Web UI ................................................................................................................ 14

8.2. Web UI Introducon .........................................................................................................................16

9. Specicaons ...............................................................................................................................................25

9.1. Transmission Distance ......................................................................................................................26

10. Warranty ........................................................................................................................................................ 26

11. Support ..........................................................................................................................................................26

1. 

The B-660-MTRX-4x4 is a 4K HDR 4x4 HDMI Matrix Switcher and allows up to four Ultra

High Denion 4K HDR or 1080p HD inputs to be independently distributed to four Ultra

HD displays. Analog audio outputs are also included for 2ch PCM audio de-embedded from

each HDMI output allowing for audio to be distributed separately from each HDMI output.

This matrix is controllable via IR, RS-232 and LAN using the built in Web UI. An API is available

separately for RS-232 and LAN control.

This matrix was designed to be an Ultra HD A/V distribuon soluon ideal for a variety of

applicaons that include Home Theater, Oces, Schools, Conference Rooms, Hotels, etc. All

this contained in a compact chassis that occupies only 1U of rack mount space.

2. 

• 4 HDMI inputs and 4 HDMI outputs

• Inputs and outputs support video resoluons up to 4K@60Hz 4:4:4 8bit and HDCP 2.2

• Supports 4K HDR, HLG & Dolby Vision™

• Fast switching between mulple video sources

• Supports L/R analog audio de-embedding outputs from each HDMI output (2ch PCM Audio

only)

• Supports IR, RS-232 and LAN (Telnet API & Web UI) control opons

• Supports API command control through RS-232 and Telnet connecon

3. 

• 1 x B-660-MTRX-4x4 Matrix

• 1 x AC Power Cord with US Pins

• 1 x IR Remote

• 2 x Mounng Brackets (with Screws)

• 1 x Installaon Manual

4. 

 

1 3

1. Output Channel Indicator

Indicates input for output port 1-4 showing the input related to the output.

2. IR Sensor

Receives IR from handheld IR Remote, IR Emier, or IR Flasher.

3. STATUS LED

On: The device is connected to the network.

O: The device is not connected to the network.

4. Power Switch

Press to power on/o the matrix.

 

1 3 42 5

1. AC 100-240V 50/60Hz

Connect to the provided power cord. Accepts AC power of 100-240V 50/60Hz.

2. HDMI IN (1-4)

Connect to HDMI Sources.

3. Network

Connect to a control system for Web UI or Telnet control.

4. RS-232

Connect to a control PC or control system for RS-232 serial control.

5. HDMI OUT (1-4)

Connect to an HDMI displays.

6. AUDIO OUT 1-4

For de-embedding 2ch PCM audio to L/R analog audio output. Connect to audio devices

via RCA stereo audio cables.

7. IR IN

Connect to the third-party IR control device.

5. 

 

The B-660-MTRX-4x4 occupies 1U space when installed in a standard 19” equipment rack.

Steps to Install the Matrix in an Equipment Rack:

1. Aach the Mounng Ears to the enclosure using the screws provided in the package

separately.

2. The Mounng Ears are aached to the enclosure as shown.

3. Repeat steps 1-2 for the other side of the unit.

4. Mount and ax the unit in the rack with the mounng screws.

 

Warnings:

• Before beginning any wiring be sure to disconnect the power from all devices in the system.

• During wiring gently connect and disconnect the cables.

Steps for device wiring:

1. Connect HDMI IN

Connect the HDMI sources (such as PC, Blu-ray player, Apple TV, 4K media player, etc) to

the HDMI IN 1-4. Ensure you are using a high-quality HDMI cable capable of supplying the

maximum resoluon you require.

2. Connect HDMI OUT

Connect the HDMI display device (such as a TV, projector, LED/LCD display or other

display device) to the HDMI OUT. Ensure you are using a high-quality HDMI cable capable

of supplying the maximum resoluon you require.

3. Connect AUDIO OUT

Connect audio devices to AUDIO OUT 1-4 of the Matrix (e.g. audio amplier) with RCA

cables.

4. Connect for addional control opons:

• Network Control (Telnet/Web UI): Connect a Local Area Network to the LAN port of

the Matrix.

• RS-232 Control: Connect a control PC or control system to RS-232 port of the Matrix.

• IR Control: The IR Remote provided is for controlling the Matrix through IR signal.

5. Connect the provided AC power cord to the Matrix.

6. Power on all aached devices.

...

Blu-ray Player Apple TV 4K Media Player

Display

Amplifier Amplifier

HDMI IN

HDMI OUT

AUDIO

OUT

AUDIO

OUT

Control System

Ethernet Switch

Ethernet

RS232 Signal

Ethernet

Applicaon Diagram

6. 

The Matrix can be controlled by the provided IR Remote by poinng it directly at the IR sensor

on front panel. This allows for selecng inputs (source) for each output (display) as well as

power On and O for connected CEC-enabled displays.

Select Previous Input for Output1

Click to Power On CEC-Enabled

Display of Output 1

Click to Power Off CEC-Enabled

Display of Output 1

Select Next Input for Output1

Select Specific Input for Output 1

Assigning Inputs (sources) to Outputs (display):

1. On the remote locate the output to assign an input to, these are in order vercally from

top to boom labeled in the middle of the remote.

2. Press the desired Input # or use the Previous or Next buon to scroll through the

available inputs.

Virtual IR Code Supported by Default (Matrix Switching Code)

  

 

   

Out1 0x57 0x41 0x09 0x1D 0x1F 0x0D

Out2 0x1B 0x11 0x17 0x12 0x59 0x08

Out3 0x55 0x48 0x5E 0x06 0x05 0x03

Out4 0x07 0x40 0x18 0x44 0x0F 0x51

7. 

Advanced users may need to control the matrix through RS-232 serial communicaon.

Connect a control PC or control system to the RS-232 port of the receiver. API command for

RS-232 control is available in the separate document “API Command Set_ B-660-MTRX-4x4”.

A professional RS-232 serial interface soware (e.g. Serial Assist) may be needed as well.

Before execung the API command through RS-232 serial connecon, please ensure RS-232

interface of the device and the control PC are congured correctly.

 

Baud Rate 115200 bps

Data Bits 8 bits

Parity None

Stop Bits 1 bit

Flow Control None

RS-232 Port Connecon Pinout

1 (NC)

3 (NC)

2 (NC)

4 (GND)

6 (TxD)

5 (RxD)

7 (NC)

8 (NC)

RJ-45

4 (GND)

5 (RxD)

6 (TxD)

Control Device

GND

TxD (Data Transmit)

RxD (Data Receive)

8. 

The Web UI designed for the matrix is available for basic controls and advanced sengs of the

device. The Web UI can be accessed through a browser, e.g. Chrome, Firefox, Safari, Opera, IE,

etc..

The default network mode of matrix is DHCP, if there’s not a DHCP server, the matrix

supports for local IP address.

 

1. Connect the device to the local area network, and connect the PC to the same local area

network.

2. Use a tool such as OvrC to idenfy the IP address of the device or send API command to

get IP address (More informaon, see the separate document “API Command Set_B-660-

MTRX-4x4”).

3. Input the IP address in your browser and press Enter. The following window will display.

4. Enter the Username and Password. The default username and password are both “binary”.

Then click “Login”. Upon rst login the following page will be pop up and require you to

change the default username and password.

Note:

• The new username and password must be dierent from the default used to access the

Web UI inially.

• The new username and password must be alphanumeric and between 4 to 16 characters in

length.

• Be sure to record the new username and password for accessing the Web UI later.

 

The web UI page includes the following submenus: SIGN OUT, FACTORY DEFAULT, UPDATE

and REBOOT on the up-right corner, Matrix Control and Sengs in the main page.



Click the icon to return to the login page.



Aer clicking the Factory Default Icon the following window will appear, click “CONFIRM” to

reboot the device.

Note: Please wait at least 3 minutes to refresh the web page and log in again.



Aer clicking the Update Icon the following window will appear.

Note: When both the MCU and Web UI are being updated the MCU must be updated

before the Web UI. This is due to Web UIs requiring specic rmware is installed.

MCU Firmware Update:

Click “BROWSE” to select the update bin le, then click “UPDATE” to upgrade the web UI.

Example Filename: MX0404-1018-S00-McuUpdate-20200313.tar.gz

Note: Filename shown here is for example purposes only.

Note: Do not power o the device when upgrading.

Web UI Update

Click “BROWSE” to select the update bin le, then click “UPDATE” to upgrade the web UI.

Example Filename: MX0404-1018-S00-WebUI-V1.09+dbfe52c6cd3cb6808252179c41d725

aa.bin

Note: Filename shown here is for example purposes only.

Note: LAN Module will update and reboot automacally, please wait about 3 minutes, then

refresh and login again. Don’t power o the the matrix when updang.



Aer clicking the Reboot Icon the following window will appear, click “CONFIRM” to reboot

the device.

Note: Please wait at least 3 minutes to refresh the web page and log in again.



This secon includes four submenus: Matrix Control, Presets, Input Names and Output

Names.

1. Matrix Control

This secon manages distribuon of input video sources to output displays. Click the buon

in the table to select the input for the output display (buon turns from grey to blue once

selecon is done).

• All Outputs: Click to route one input to all outputs.

• None: None input is routed to the output (or the output is turned o).

By default, Video Input 1 routes to Output 1, …, Video Input 3 routes to Output 3, Video Input

4 routes to Output 4.

2. Presets

This secon saves/loads the input/output switch sengs to or from the Matrix.

• SAVE: Sengs in Video Matrix Control secon are saved.

• LOAD: Preset already saved is loaded.

3. Input Names

This secon allows you to redene input names to idenfy them by the connected source.

• SAVE: Click to save the name change.

• RESET: Click to reset the name change.

4. Output Names

This secon allows you to redene input names to idenfy them by the connected display or

zone locaon.

• SAVE: Click to save the name change.

• RESET: Click to reset the name change.

Note: The length of alias name is limited to 15 characters total.

La page est en cours de chargement...

Binary B-660-MTRX-4x4 Guide d'installation

Marque: Binary

Modèle: B-660-MTRX-4x4

Catégorie: Commutateurs vidéo

Taper: Guide d'installation

Télécharger le PDF

rapport

dans d''autres langues

English: Binary B-660-MTRX-4x4 Installation guide

Binary B-660-MTRX-4x4 Guide d'installation

Binary B-660-MTRX-4x4 Guide d'installation

dans d''autres langues

Autres documents