Breville TOUCH Impress Espresso Manuel utilisateur

EN INSTRUCTION BOOK FR-CA MANUEL D'INSTRUCTIONS ES-MX MANUAL DE INSTRUCCIONES

the Barista Touch™ Impress

2

Contents

BREVILLE®

RECOMMENDS

SAFETY FIRST

At Breville® we are very

safety conscious. We design

and manufacture consumer

products with the safety of

you, our valued customer,

foremost in mind. In addition,

we ask that you exercise a

degree of care when using

any electrical appliance

and adhere to the following

precautions.

READ ALL

INSTRUCTIONS

BEFORE USE AND

SAVE FOR FUTURE

REFERENCE

IMPORTANT

SAFEGUARDS

• Remove and discard any

packaging materials safely

before use.

• Ensure the product is

properly assembled before

ﬁrst use and fully unwind

the power cord before

operating.

• Before using for the ﬁrst

time, please ensure that

your electricity supply

is the same as shown on

the rating label on the

underside of the appliance

(V ~Hz  W).

If you have any concerns,

please contact your local

electricity company.

• The installation of a

residual current safety

switch is recommended

to provide additional

safety when using all

electrical appliances.

2 Breville® Recommends

SafetyFirst

8 Features

9 Components

11 Assembly

12 Functions

22 Care & Cleaning

26 Troubleshooting

3

EN

Safety switches with a

rated operating current

not more than mA are

recommended. Consult an

electrician for professional

advice.

• For your maximum

electrical safety, always

use this espresso machine

on a properly grounded

circuit. It is recommended

to use this machine on a

dedicated circuit separate

from other electrical

appliances.

• Do not operate the

appliance with a damaged

cord or plug or after the

appliance malfunctions

or has been damaged

in any manner. Return

the entire appliance to

the nearest authorized

Breville® Service Center for

examination, replacement,

or repair.

• Do not let the power cord

hang over the edge of a

counter or table. Do not

let the power cord touch

hot surfaces or become

knotted.

• Do not touch hot

surfaces. Always ensure

the appliance has been

allowed to cool; if the

appliance is to be: left

unattended, cleaned,

moved, assembled or

stored, or when changing

accessories; always switch

o the espresso machine

by pressing the POWER

button to OFF, and unplug

from the power outlet.

• To unplug, grasp the plug

and pull from the outlet.

Never pull from the

power cord.

• This appliance is not

intended for use by people

(including children) with

reduced physical, sensory

or mental capabilities

or lack of experience

and knowledge, unless

they have been given

supervision or instruction

concerning use of the

appliance by a person

responsible for their safety.

• Children must be

supervised to ensure that

4

they do not play with the

appliance.

• Do not leave the appliance

unattended when in

use. Do not move the

appliance whilst

in operation.

• Close supervision is

necessary when any

appliance is used by or

near children. Keep the

appliance and its cord out

of reach of children.

• To eliminate a choking

hazard for young children,

discard the protective

cover ﬁtted to the power

plug safely.

• Position the appliance on

a stable, heat resistant,

level, dry surface away

from the counter edge,

and do not operate on or

near a heat source such as

a heated oven, a hot gas or

electric burner.

• Do not operate the

appliance in an enclosed

space, or inside a

cupboard.

• Ensure the surface is level,

clean and free of water and

other substances.

• Do not use attachments

other than those provided

with the appliances. The

use of attachments not

sold or recommended by

Breville® may cause ﬁre,

electric shock, or injury.

• This appliance is for

household use only. Do

not use the appliance for

anything other than its

intended purpose. Do not

use in moving vehicles or

boats. Do not use outdoors.

Misuse may cause injury.

• Do not attempt to open

or service the espresso

machine. Servicing should

only be performed by

an authorized service

representative.

• Improper use

of the appliance

incorrectly operated or

unprofessionally repaired.

In such a case, any

warranty claim is void. No

warranty claim for any

damages can be accepted.

• The appliance is not

intended to be operated

by means of an external

timer or separate

remote-control system.

5

EN

• Use caution when

operating machine as

metal surfaces are liable

to get hot during use.

Heating element is subject

to residual heat after use.

• Do not put ﬁngers into

the tamping chute

when pushing down the

tamping lever.

• Do not open the

programming port, this is

exclusively for authorised

service personnel only.

• Do not operate the grinder

without the hopper lid in

position. Keep ﬁngers,

hands, hair, clothing, and

utensils away from the

hopper during operation.

Always check the grinder

hopper for presence of

foreign objects before

using. Do not touch

moving parts.

• Ensure the portaﬁlter

is ﬁrmly inserted and

secured into the group

head before starting an

extraction. Never remove

the portaﬁlter during the

extraction process. Fail to

follow this instruction may

lead to scalding by hot

steam or hot coee.

• Do not ﬁll water tank with

hot water.

• Never use the appliance

without water in the water

tank.

• Wipe the outer surface

with a soft, damp cloth

and then polish with a

soft, dry cloth. Keep the

appliance and accessories

clean. Follow the cleaning

instructions provided.

CAUTION

To prevent damage to

the appliance, do not use

alkaline cleaning agents

when cleaning, use a

soft cloth and a mild

detergent.

WARNING

To avoid the risk of injury,

do not open the brew

chamber during the brew

process.

6

To protect against ﬁre

or electric shock, do

not immerse the power

cord, power plug or

appliance in water or any

other liquid.

SPECIFIC

INSTRUCTIONS FOR

WATER FILTER

• Filter cartridge should

be kept out of reach

ofchildren.

• Store ﬁlter cartridges in

adry place in the original

packaging.

• Protect cartridges from

heat and direct sunlight.

• Do not use damaged ﬁlter

cartridges.

• Do not open ﬁlter

cartridges.

• If you are absent for a

prolonged period of time,

empty the water tank and

replace the cartridge.

NOTICE TO

CUSTOMERS

REGARDING MEMORY

STORAGE

Please note that in

order to better serve

our customers, internal

memory storage has

been imbedded into

your appliance. This

memory storage consists

of a small chip to collect

certain information

about your appliance

including the frequency

of use of the appliance

and the manner in which

your appliance is being

used. In the event your

appliance is returned for

service, the information

collected from the chip

enables us to quickly and

eciently service your

appliance.

7

EN

The information collected

also serves as a valuable

resource in developing

future appliances to

better serve the needs

of our consumers. The

chip does not collect any

information regarding the

individuals who use the

product or the household

where the product is

used. If you have any

questions regarding the

memory storage chip

please contact us at

privacy@breville.com

SHORT CORD

INSTRUCTIONS

Your Breville appliance is

ﬁtted with a short power

cord to reduce personal

injury or property

damage resulting from

pulling, tripping or

becoming entangled with

a longer cord. Longer

detachable power cords

or extension cords are

available and may be

used if care is exercised.

If an extension cord is

used, () the marked

electrical rating of the

cord set or extension cord

should be at least as great

as the electrical rating of

the appliance, () the cord

should be arranged so

that it will not drape over

the counter-top or table

where it can be pulled

on by children or tripped

over unintentionally and

() the extension cord

must include a -prong

grounding plug.

FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

8

RAPID HEAT UP

Innovative heating system achieves ideal

extraction temperature in  seconds.

PRECISION CONICAL BURR GRINDER

Precision conical burrs maximize ground

coee surface area for a full espresso ﬂavor.

STEPBYSTEP BARISTA GUIDANCE

Swipe and select from the drink’s menu.

Receive guidance throughout the whole coee

making process so you can enjoy a perfect cup

of coee. Adjust your shot volume, milk texture

or milk temperature, then save it as your

personal favorite.

ADJUSTABLE GRIND SIZE

Espresso grind settings from ﬁne to coarse

foroptimal extraction.

ADJUSTABLE GRIND AMOUNT

Adjust the amount of fresh ground coee

dosed into the ﬁlter basket to suit the ﬁneness

or coarseness of the grind.

PID TEMPERATURE CONTROL

Electronic PID temperature control for

increased temperature stability.

DEDICATED HOT WATER SPOUT

Dedicated hot water outlet for making a cup

ofAmericano, teas, and pre-heating cups.

LESS MESS

The portaﬁlter remains secure in the same

position as you grind, dose and tamp, reducing

any potential grinds mess on your drip tray

and bench top.

THE BARISTA TOUCH™ IMPRESS

PUCK SYSTEM

Simpliﬁes the steps needed to grind, dose, and

tamp to create an impressive puck. Less mess.

Less fuss.

• Precision Measurement Auto Corrects

theNext Dose

Grind measurement displayed on screen

indicates when correct level is achieved, and

the system automatically remembers the

adjustment for the next dose.

Correct dose level is calculated based

onmeasured grind amount.

• Assisted Tamping with a  Barista Twist

Finish

Precise lbs ( kg) impression with

aprofessional  degree barista twist for

apolished puck.

AUTOMATIC HANDSFREE MILK

TEXTURING

Automatically textures milk to the selected

temperature and style from silky smooth latté

to creamy cappuccino. Choose your preferred

milk type to optimize your milk results for

dairy, almond, soy and oat milk. Automatic

purge removes residual milk from the steam

wand once texturing is complete.

Features

9

EN

A.  oz ( g) Bean Hopper

B. Touch Screen

C. Power Button

D. Tamp Lever

E. Grind Size Adjustment Dial

F. Removable Tamp Cover

G. Grinding Cradle

H. Group Head

I. Hot Water Spout

J.  mm Stainless Steel Portaﬁlter

K. Steam Wand

L. Drip Tray Grill

M. Milk Temperature Sensor

N. Drip Tray

NOT SHOWN

•  ﬂ. oz (L) Removable Water Tank

• Tool Storage Tray

• Power Cord Storage

Components

A

B

C

D

E

F

H

I

GK

J

LM

N

Rating Information

120 V ~ 60 Hz 1 750 W

10

ACCESSORIES

A. Stainless Steel Milk Jug

B.  cup &  cup Single Wall Filter Baskets

C.  cup &  cup Dual Wall* Filter Baskets

D.  mm Stainless Steel Portaﬁlter

E. Water Filter Holder With Filter

F. Cleaning Disc

G. Cleaning Tablets

H. Cleaning Brush

I. The Razor™ precision dose trimming tool

J. Descale Powder

K. Cleaning Tool For Steam Wand Tip

L. Water Hardness Strip

M. Drip Tray Guard

(included with machines in color only)

*  cup dual wall ﬁlter basket comes

installed in the portaﬁlter

B

H

C

D

A

G

F

E

I

J

K

L

M

11

EN

BEFORE FIRST USE

Machine Preparation

Remove and discard all labels and packaging

materials attached to your espresso machine.

Ensure you have removed all parts and

accessories from the box before discarding

thepackaging.

Remove the water tank located at the back of

the machine by pulling the water tank handle.

Clean parts and accessories (water tank,

portaﬁlter, ﬁlter baskets, jug) using warm water

and a gentle dish washing liquid. Rinse well

then dry thoroughly.

NOTE

Machines with color, drip tray protection guard

is included. DO NOT DISCARD.

INSTALLING THE WATER FILTER

• Remove the water ﬁlter and water ﬁlter holder

from the plastic bag.

• Soak the ﬁlter in cold water for  minutes.

• Rinse the ﬁlter holder with cold water.

• Set the reminder for next month of

replacement. We recommend to replace

theﬁlter after  months.

• Insert the ﬁlter into the two parts of the ﬁlter

holder.

• To install the assembled ﬁlter holder into the

water tank, align the base of the ﬁlter holder

with the adapter inside the water tank. Push

down to lock into place.

NOTE

Replacing the water ﬁlter every three months

will reduce the need to descale the machine.

Filters can be purchased at www.breville.com

NOTE

If your water hardness is either  or  when

tested, we strongly recommend you to change

to an alternate water source. Filtered water

will extend both the life of your built-in ﬁlter

and descale intervals as well as superior taste.

Please ensure to test the water hardness of the

alternative water source you’ve chosen and

input into the machine accordingly. Avoid

using overly ﬁltered water, like RO water

unless some mineral content is being added

back to the ﬁnal water. Never use distilled

water, or water with no or low mineral content

as this will aect the taste of coee.

Assembly

12

Attaching the Hopper

• Insert the bean hopper into position on top

ofthe machine.

• Turn the dial to lock the hopper into place.

• Fill the hopper with fresh beans.

TIP

We recommend quality  Arabica beans

with a ‘Roasted On’ date stamped on the bag,

not a ‘Best Before’ or ‘Use By’ date. Coee

beans are best consumed between  to  days

after the ‘Roasted On’ date. Stale coee may

pour too quickly from the portaﬁlter spouts

and taste bitter and watery.

Attaching the Drip Tray

• Place the drip tray grill on top of the drip tray.

• Machines with color, attach the drip tray

protection guard cover on the drip tray.

• Slide the drip tray into the machine.

NOTE

Using the drip tray protection guard cover

is optional. But note that using the drip tray

protection guard can protect your drip tray

from dents and scratches.

Filling the Water Tank

• Ensure the water ﬁlter is securely ﬁtted inside

the water tank.

• Use the handle at the top of the water tank to

assist in lifting the water tank and away from

the machine.

MAX

• Fill the water tank with cold potable tap water

up to the MAX marking indicated on the side

of the water tank.

• Replace the water tank back on the machine,

pressing down to ensure that it is properly

positioned and attached to the machine.

MAX

NOTE

If the water level in the water tank is below

the minimum (MIN) marking, the espresso

machine will not operate.

Functions

13

EN

GENERAL OPERATION

• Check the water tank is ﬁlled with cold tap

water up to the maximum mark.

• Plug the power cord into the power outlet.

• Press the ‘Power’ button.

• Follow the instructions on screen to guide

you through ﬁrst use setup.

DRINK SELECTION

Swipe and select your choice of drink.

NOTE

Please keep the touch screen dry and clean

toensure that the machine functions properly

DRINK SCREEN

In this screen, you can customize your drink

bytouching the choice of drink on screen.

A. Home icon

B. Chosen drink

C. Hot water

D. Grind / Dose  tap the icon below the

portaﬁlter to adjust grinder settings.

E. Brew  tap the icon below the coee glass

toadjust brewing settings.

F. Milk texture  tap the icon below the milk

jug to adjust milk settings.

A B C

D E F

14

SETTING THE GRIND SIZE AND

DOSING

• Adjust the grind size by using the dial on the

side of the machine.

• Follow the screen prompts to select the

preferred ‘Basket Size’.

• Tap on the portaﬁlter image to start the

grinding and allow fresh ground coee to ﬁll

the portaﬁlter.

• Grinding will automatically stop.

INTELLIGENT BREW SETUP

Intelligent Brew Setup is a feature that helps

achieve a good coee extraction range by

assisting the dial-in process of the grinder.

When successfully completed, you can enjoy

a balanced coee shot.

From this point, further adjust grind size and

experiment to suit your style.

It is recommended using this feature whenever

you change beans, or the too fast or too slow

notiﬁcations are shown on screen.

Find the Intelligent Brew Setup in the Settings

menu under Drinks Settings.

MANUAL GRIND PURGE

For best coee results, if the machine has not

been used for a while it is recommended to

purge any stale beans that have been ground

and left in the grinder chute.

To purge; tap and hold the grind button for

 seconds, and run for around  seconds.

To stop; press the stop button. Grind purge

will stop automatically after  seconds if stop

button is not pressed.

ASSISTED TAMPING

• When grind cycle is completed, the machine

is ready to tamp.

Push the lever downwards to the end position.

This will tamp the coee grinds in the

portaﬁlter using a consistent amount of tamp

force. Pushing the lever slowly and consistently

will help to improve the puck appearance.

• Release the lever slowly upwards to the home

position after tamping.

• Repeat the tamping action as above twice.

15

EN

NOTE

Screen will indicate if tamp or dose is low, ideal

or high.

HOW TO CORRECT AN UNDER OR

OVER DOSE?

An under or over dose can occur when fresh

beans are added to the hopper; when coee

beans age; a dierent type of coee bean is

used or if a change is made to the grind size.

What to do when dose level is below the ideal

middle bar?

• When dose is below the ideal middle bar, the

machine will indicate and calculate ‘A Bit

More’. Tap the portaﬁlter image on screen to

add a bit more and follow screen prompts and

complete a tamp for an updated dose level

reading.

• When ideal dose level is reached, the

machine will automatically update the auto

dose time for the next cycle.

What to do when dose level is above the ideal

middle bar?

• When dose is above the ideal middle bar,

remove the portaﬁlter from the cradle.

• Use the Razor Trimming Tool. (refer to

Trimming the Dose section).

• The machine will calculate how much to

reduce the auto grind time and apply this

forthe next cycle.

OVER DOSE TRIMMING THE DOSE

Precision dose trimming tool

The Razor™ precision dose trimming tool

allows you to trim the puck to the right level for

a consistent extraction.

Insert the Razor™ into the coee basket until

the shoulders of the tool rest on the rim of

the ﬁlter basket. The blade of the dosing tool

should penetrate the surface of the tamped

coee.

Rotate the Razor™ dosing tool back and forth

while holding the portaﬁlter on an angle over

the knock box to trim o excess coee.

16

Inserting the Portaﬁlter

Place the portaﬁlter underneath the group head

so that the handle is aligned with the INSERT

position. Insert the portaﬁlter into the group

head and rotate the handle towards the center

until resistance is felt.

ESPRESSO EXTRACTION

• Select a display of brew options on the screen.

• Select the café size options from:

Single (approx. . ﬂ oz /  mL),

Double (approx.. ﬂ oz /  mL)

Double (approx. . ﬂ oz /  mL).

• Select Custom and slide and drag the dot

toincrease or decrease the coee volume.

• Tap the coee cup image on the screen

tostart extraction.

• The duration times are preset but can

becustomized.

MANUAL OVERRIDE

Press and hold the coee image (approx.

seconds) to enter manual extraction mode.

Touch the coee image to start the extraction,

touch the coee image again to stop the

extraction.

NOTE

• The amount of espresso extracted in the cup

will vary depending on your grind size and

grind amount settings.

• Touching the coee image during a preset

shot volume will immediately stop the

extraction.

• For optimal ﬂavor when using a  cup ﬁlter

basket, you should extract approx. . ﬂ oz/

 mL. When using a  cup ﬁlter basket,

youshould extract approx. . ﬂ oz /  mL.

TEXTURING MILK

Dierent brands and milk alternatives will

texture dierently. For best texturing results

it is recommended to use whole milk when

using dairy milk and use barista type milks

when using plant-based milks. Adjust the froth

level accordingly. Start with cold milk. Fill milk

jug to below the spout position. Lift the steam

wand and insert into milk jug. Lower steam

wand, ensuring it is fully down. The milk jug

should rest on the milk temperature sensor

located on the drip tray and tip of the steam

wand should be submerged and ensure that

milk covers the ring around the steam wand tip.

MAX

MIN

MILK MUST

COVER THIS

RING

17

EN

NOTE

Check the image on the screen for the correct

milk jug position.

Under the milk jug image, tap the icon to adjust

the milk temperature, the level of milk froth

orchange your milk option: Dairy, Almond,

Oat or Soy.

To start, touch the ‘Milk jug’ image. The screen

will display the temperature of the milk as

itheats.

Milk texturing will stop automatically when the

selected milk temperature is reached.

Lift steam wand to remove milk jug. Wipe the

wand and tip with a clean damp cloth. Lower

steam wand to the down position and the wand

will automatically purge.

MANUAL MILK TEXTURING

Auto milk texturing and auto shut-o are

disabled during manual milk texturing mode.

Start with a cold milk. Fill milk jug to below the

spout position. Lift the steam wand and slide

the milk jug under the steam wand. Hold the

milk jug at an angle.

Start frothing by tapping the milk jug image

on screen. When frothing is done and the jug

is hot to comfortably touch; tap the milk jug

image on screen to stop.

Wipe the wand & tip with a clean damp cloth.

Lower steam wand to the down position and

the wand will automatically purge.

CAUTION: BURN HAZARD

Pressurized steam can still be released, even

after machine has been switched o. Children

must always be supervised.

NOTE

• When the machine creates steam, a pumping

noise can be heard. This is the normal

operation of the pump.

• Use exclusively the stainless steel milk jug

included in the pack to froth milk. The use

ofcontainer made of glass or plastic material

to froth milk may lead to overheating milk

ordangerous conditions.

USING HOT WATER

The machine has a dedicated hot water spout.

The HOT WATER function can be used to pre-

heat cups or add hot water manually. Tostart

and stop hot water, touch ‘Hot Water’ icon on

the screen.

NOTE

Using the hot water spout and the steam wand

is not possible when extracting espresso.

Run hot water before or after extracting

espresso.

WARNING

Filled cup temperature is approximately F-

F ( C -  C). Be careful in handling

hot beverages.

18

TIP

Heating your cup or glass

A warm cup will help maintain the coee’s

optimal temperature. Pre-heat your cup by

rinsing with hot water from the hot water spout

and place on the cup warming tray.

Heating the portaﬁlter and ﬁlter basket

A cold portaﬁlter and ﬁlter basket can

reduce the extraction temperature enough to

signiﬁcantly aect the quality of your espresso.

Always ensure the portaﬁlter and ﬁlter basket

are pre-heated with hot water from the hot

water spout before initial use.

NOTE

Always wipe the portaﬁlter and ﬁlter basket dry

before dosing with ground coee as moisture

can encourage ‘channeling’ where water by-

passes the ground coee during extraction.

FILTER BASKETS

This machine includes both single and dual

wall,  cup and  cup ﬁlter baskets.

Use the  cup ﬁlter basket when brewing a

single cup and the  cup ﬁlter baskets when

brewing  cups or a stronger single cup or mug.

The provided ﬁlter baskets are designed for

ground coee:

 cup ﬁlter basket  -g

 cup ﬁlter basket  -g

Single Wall Filter Baskets

1 CUP 2 CUP

Single Wall ﬁlter baskets should be used when

grinding fresh whole coee beans.

These allows you to experiment with grind and

dose to create a more balanced espresso.

Dual Wall Filter Baskets

1 CUP 2 CUP

Dual Wall ﬁlter baskets should be used when

using pre-ground coee and older beans that

are past the  day roast date.

These regulate the pressure and help to

optimize the extraction regardless of the grind,

dose, or freshness.

THE GRIND

Adjusting the Grind Size

The grind size will aect the rate of water ﬂow

through the coee in the ﬁlter basket and the

ﬂavor of the espresso. When setting the grind

size, it should be ﬁne but not too ﬁne and

powdery.

19

EN

To adjust the grind, rotate the grind dial to the

back of the machine to go coarser, or rotate

the dial towards the front of the machine to go

ﬁner or slide the dot on the screen to the left for

a ﬁner grind or to the right for a coarser grind.

The smaller the value shown on screen, the

ﬁner the grind size. The larger the value shown

on screen, the coarser the grind size.

NOTE

• When making changes to the grind size, the

new auto dosing time will be calculated after

your next tamp and updated for the dose

cycle following that. The dose amount is

calculated and stored automatically. Two to

three extractions may be required to calibrate

the extraction.

• For most bean varieties, the grinder will

pause the grind operation when coee beans

ran out.

Extracting Espresso

• As a guide, the espresso will start to ﬂow

after - seconds (infusion time) and should

bethe consistency of dripping honey.

• If the espresso starts to ﬂow before  seconds

you have either under dosed the ﬁlter basket

and/or the grind is too coarse. This is an

UNDER-EXTRACTED shot.

• If the espresso starts to drip but doesn’t ﬂow

after  seconds, then you have either over

dosed the ﬁlter basket and/or the grind is too

ﬁne. This is an OVER-EXTRACTED shot.

A great espresso is about achieving the perfect

balance between sweetness, acidity, and

bitterness.

The ﬂavor of your coee will depend on many

factors, such as the type of coee beans, degree

of roast, freshness, coarseness or ﬁneness of the

grind, and the dose of ground coee.

Experiment by adjusting these factors just one

at a time to achieve the taste of your preference.

HOW TO ADD & DELETE

CUSTOMIZED DRINKS

Adding A New Drink

When customizing a default drink, tap the

disk icon on the upper right of the screen to

rename and save newly created coee settings.

Name the new drink with a maximum of 

characters. Every created drink is saved to the

start of the drink carousel.

Editing Or Deleting A Saved Drink

Select the name of the saved drink and tap and

hold the coee image for three seconds and

select either ‘Edit’ or ‘Delete’ from the screen.

Press ‘Yes’ to conﬁrm or ‘No, cancel’ to return

tothe drink carousel screen.

20

SETTINGS

To enter settings menu, touch the icon on the

upper right of the screen.

Maintenance

Clean Steam Wand – This will show how to

clean the steam wand to remove any blockage

for better steaming performance.

Group Head Cleaning – This will need

Espresso cleaning tablet or powder and will

take  minutes to complete.

Grinder Cleaning – Follow step-by-step

process to clean the grinder to help the grinder

running in its optimal capacity and avoid

possible blockages.

Descale – Descaling prevents excess mineral

and scale build-up. A pop-up message will let

you know when it is time for descaling.

Water Filter Change – To ensure machine has

clean water to use.

Drink Settings

Intelligent Dose – To turn on or o ‘Intelligent

Dosing’ that measures the dose and enables

the intelligent brewing calibration feature.

Default Milk – List of dierent kinds of milk

and select the desired milk default.

Coee Tutorial – Machine will guide you on

screen, step by step to make an actual coee.

Other

Notiﬁcations – List of the machine notiﬁcation

alerts.

Guidance Tips – To turn on and o the

guidance tip animations on the drink screen.

Date & Time – To help set the date and time on

the machine.

Units – To switch between imperial and metric

units.

Help – Online help information screen with

QRCode.

Language – To set the machine’s language.

Demo mode – For on-screen Barista Touch™

Impress demonstration sequence.

About Appliance –To show model number

andﬁrmware version of the machine.

Factory Reset – Use this function to reset

all programmable values back to the factory

settings and delete all custom drinks.

La page est en cours de chargement...

Breville TOUCH Impress Espresso Manuel utilisateur

Breville TOUCH Impress Espresso Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents