IMPORTANT
SAFETY
INSTRUCTIONS!
1.
READ
these instructions.
2.
KEEP
these instructions.
3.
HEED
all warnings.
4.
FOLLOW
all instructions.
5. CLEAN
ONLY
with
dry
cloth.
6.
DO
NOT
block any ventilation openings. Install in
accordance
with
the
manufacturer's instructions.
7.
DO
NOT
install near any heat sources such as radiators,
heat registers, stoves,
or
other
apparatus (including
amplifiers)
that
produce heat.
8.
DO
NOT defeat
the
safety purpose
of
the polarized
or
grounding
type
plug. A polarized plug has two blades
with
one wider than the other. A grounding type plug
has two blades and a
third
grounding prong. The wider
blade
or
the
third
prong are provided
for
your safety.
If
the
provided plug does
not
fil
into
your outlet, consult an
electrician
for
replacement
of
the obsolete outlet.
9.
PROTECT
the power cord
from
being walked on
or
pinched, particularly
at
plugs, convenience receptacles,
and
the
point
where they exit from the apparatus.
10.
ONLY
USE
attachments/accessories specified by
the
manufacturer.
11.
USE
only with a cart, stand, tripod, bracket,
or
table
specified by the manufacturer,
or
sold
with
the
apparatus. When a
cart
is used, use caution when •
moving
the
cart/apparatus combination
to
avoid
"1lf
injury
from tip·over.
12.
UNPLUG this apparatus during lightning storms
or
when
unused
for
long periods
of
time.
13.
REFER
all servicing
to
qualified service personnel.
Servicing is required when
the
apparatus has been
damaged in any
way,
such as power-supply cord
or
plug
is damaged, liquid has been spilled
or
objects have fallen
into
the apparatus, the apparatus has been exposed
to
rain
or
moisture, does
not
operate normally,
or
has
been dropped.
14.
To
completely disconnect this apparatus from
the
AC
mains, disconnect the power supply cord plug
from
the
AC
receptacle.
15.
The mains plug
of
the power supply cord shall remain
readily operable.
16.
Do
not
overload wall outlets
or
extension cords beyond
their
rated capacity , which could cause an electric
shock
or
fire
,A
The exclamation point, within an equilateral triangle, is
intended
to
alert the user
to
the
presence
of
important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
A.
The lightning flash with arrowhead symbol within an
equilateral triangle is intended
to
alert
the user
to
the presence
of
uninsulated "dangerous voltage" within the
product's enclosure
that
may be
of
sufficient magnitude
to
constitute a risk
of
electrical shock
to
persons.
WARNING:
To
reduce the risk
of
fire
or
electrical shock,
do
not
expose this apparatus
to
rain
or
moisture.
A
13m:
WARNING;
Voltages in this equipment are hazardous
to
life.
No
user-serviceable parts inside. Refer all servicing
to
qualified service personnel.
CAUTION: Changes
or
modifications
not
expressly approved
by the manufacturer could void the user's
authority
to
operate
this device.
FCC
AND
CANADA
EMC COMPLIANCE INF"ORMATION
This device complies with part
15
of
the
FCC
Rules.
Operation is
subject
to
the following two conditions:
(1) This device may not
cause
harmful interference, and (2)
this device must accept any interference received, including
interference that may
cause
undesired operation.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class 8 digital device, pursuant to part
15
of
the
FCC
Rules.
These
limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates,
uses
and
can
radiate radio frequency energy and,
if
not installed and used in
accordance with the instructions, may
cause
harmful interference
to
radio communications.
However,
there is no guarantee that
interference will
not
occur in a particular installation.
II
this