Infinity NF4 SLI Manuel utilisateur

935-CK804A-000

87100523

System Board User’s Manual

Carte Mère Manuel Pour Utilisateur

System-Platine Benutzerhandbuch

Manual del Usuario de Placas Base

Ðóêîâîäñòâî ÏîëüçîâàòåëÿÐóêîâîäñòâî Ïîëüçîâàòåëÿ

Ðóêîâîäñòâî Ïîëüçîâàòåëÿ

2

Quick Setup Guide

1

Quick Setup

Guide

Copyright

This publication contains information that is protected by copyright. No part of it

may be reproduced in any form or by any means or used to make any

transformation/adaptation without the prior written permission from the copyright

holders. This publication is provided for informational purposes only. The

manufacturer makes no representations or warranties with respect to the

contents or use of this manual and specifically disclaims any express or implied

warranties of merchantability or fitness for any particular purpose. The user will

assume the entire risk of the use or the results of the use of this document.

Further, the manufacturer reserves the right to revise this publication and make

changes to its contents at any time, without obligation to notify any person or

Trademarks

Product names or trademarks appearing in this manual are for identification

purpose only and are the properties of the respective owners.

Caution

To avoid damage to the system, use the correct AC input voltage range

..

.

To reduce the risk of electric shock, unplug the power cord before removing the

system chassis cover for installation or servicing. After installation or servicing,

cover the system chassis before plugging the power cord.

Battery: 1. Danger of explosion if battery incorrectly replaced. 2. Replace only

with the same or equivalent type recommend

by the manufacturer. 3. Dispose of

used batteries according to the battery manufacturer’s

instructions.

Notice

The system board and accessories in the package may not come similar to the

information stated in this manual. This may differ in accordance to the sales region

or models in which it was sold. For more information about the standard

package in your region, please contact your dealer or sales representative.

FCC and DOC Statement on Class B

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference when the

equipment is operated in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accord-

ance with the instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio TV technician for help.

Notice:

1. The changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate the

equipment.

2. Shielded interface cables must be used in order to comply with the emission

limits.

3

1

Quick Setup Guide

Quick Setup

Guide

Table of Contents

Chapter 1

Quick Setup Guide.............................................

Chapter 2

English......................................................................

Chapter 3

Français....................................................................

Chapter 4

Deutsch...............................................................................

Chapter 5

Español............................................................................

Chapter 6

Ðóññêèé.......................................................................

4

17

21

25

29

33

The user’s manual in the provided CD contains detailed information about the system board. If, in some

cases, some information doesn’t match those shown in this manual, this manual should always be re-

garded as the most updated version.

Le manuel d’utilisateur dans le CD muni contient renseignement détaillé au sujet de carte de système. Si,

en quelque cas, quelque renseignement n’appareille de ce que dit dans ce manuel, ce manuel doit

toujours être considéré comme la plus nouvelle version.

Das Benutzerhandbuch in der angebotenen CD enthält detaillierte Informationen über die Hauptplatine.

Wenn in manchen Fällen manche Informationen nicht denjenigen Informationen dargestellt in diesem

Handbuch entsprechen, soll dieses Handbuch als die meist aktualisierte Ausgabe gelten.

El uso explicativo contene información detalle sobre la sistema board en el CD preparativo. Si en algún

caso, la información no es igual con el uso explicativo, necesita ver el uso explicativo, esque es más

nuevo.

Â ðóêîâîäñòâå ïîëüçîâàòåëÿ íà ïðåäîñòàâëÿåìîì CD äèñêå ñîäåðæèòñÿ ïîäðîáíàÿ

èíôîðìàöèÿ î ìàòåðèíñêîé ïëàòå. Èíîãäà íàïå÷àòàííîå ðóêîâîäñòâî ìîæåò íå

ñîâïàäàòü ðóêîâîäñòâîì íà CD, òàê êàê ïîñëåäíåå íàèáîëåå ÷àñòî îáíîâëÿåòñÿ è

ÿâëÿåòñÿ ñàìûì ñâåæèì.

4

Quick Setup Guide

1

Quick Setup

Guide

System Board Layout

Chapter 1 - Quick Setup Guide

5

1

Quick Setup Guide

Quick Setup

Guide

System Memory

• DIMMs are on the same channel.

• DIMMs in a channel can be identical or

completely different. However, we highly

recommend using identical DIMMs.

• Not all slots need to be populated.

• DIMMs of the same memory configura-

tion are on different channels.

Single Channel

Dual Channel

Memory Configurations

The table below shows the DIMM sockets that must be populated

with DIMMs for single or dual channel interface. We strongly

recommend that you strictly follow the memory configurations below.

Installing DDR DIMMs other than the recommended configurations

may cause system boot failure.

DDR 1

-

DDR 1

-

DDR 1

Dual Channel

Single Channel

DDR 2

-

DDR 2

-

DDR 3

-

DDR 3

-

DDR 4

-

DDR 4 Channel B

DDR 3 Channel A

DDR 2 Channel B

DDR 1 Channel A

6

Quick Setup Guide

1

Quick Setup

Guide

Important Notes on Memory Usage

1. The system board will fail to boot when 3 DIMMs are used.

The integrated memory controller in AMD's 64-bit Socket 939

series CPU supports dual channel however when 3 DIMMs are

installed, the controller is not capable of accurately distinguishing

between dual and single channels resulting to boot up problem.

Even if you have luckily booted the system, the total memory

size detected is from 2 DIMMs only, not 3. Therefore we do not

suggest using 3 DIMMs.

Memory Speed

DDR400

DDR333

DDR400

DDR333

DIMM 1

S

D

S

D

S

D

S

D

DIMM 2

S

D

S

D

DIMM 3

S

D

S

D

S

D

DIMM 4

S

D

"S": Single side DIMM

"D": Double side DIMM

2. The table below lists different memory configurations and their

corresponding memory speed. Take note that some memory

configurations will automatically reduce the memory speed to

DDR333.

If in any case the system becomes unstable, set the memory

timing from “1T” to “2T” in the “1T/2T Memory Timing” field

(Genie BIOS Setting submenu of the Award BIOS).

7

1

Quick Setup Guide

Quick Setup

Guide

Jumpers

Important:

The 5VSB power source of your power supply must support

≥

720mA.

Clear CMOS Data

PS/2 Power Select

2-3 On:

Clear CMOS Data

1-2 On: Normal

(default)

X

JP2

312312

X

JP7 3

1

2

3

1

2

2-3 On: 5VSB

1-2 On: 5V

(default)

8

Quick Setup Guide

1

Quick Setup

Guide

Important:

If you are using the Wake-On-USB Keyboard/Mouse function for 2

USB ports, the 5VSB power source of your power supply must

support

≥

1.5A. For 3 or more USB ports, the 5VSB power source of

your power supply must support

≥

2A.

USB Power Select

Rear Panel I/O Ports

X

USB 1-4

(JP5)

3

1

2

3

1

2

2-3 On: 5VSB1-2 On: 5V

(default)

2-3 On: 5VSB

1-2 On: 5V

(default)

X

USB 5-10

(JP6)

312312

PS/2

Mouse

PS/2

K/B

COM

S/PDIF-out

S/PDIF-in USB 1-2 USB 3-4

1394_1

LAN

Parallel

Line-out

Line-in

Mic-in

9

1

Quick Setup Guide

Quick Setup

Guide

I/O Connectors

Note:

DO NOT use RCA S/PDIF and optical S/PDIF at the same time.

S/PDIF-in/out Jacks

W

J3

1

5

+5V

Key

SPDIF out

SPDIF in

GND

S/PDIF-out

S/PDIF-in

W

IEEE 1394

1394_1

W

1394_2

+12V (fused)

1

TPA+

Ground

TPB+

+12V (fused)

Key

TPA-

Ground

TPB-

Ground

2

10

9

10

Quick Setup Guide

1

Quick Setup

Guide

USB 4

USB 3

Universal Serial Bus Ports

W

USB 2

USB 1

USB 5-6

W

USB 7-8

W

USB 9-10

1

VCC

-Data

+Data

Ground

Key

VCC

-Data

+Data

Ground

N. C.

2

10

9

CD-in Internal Audio Connector

W

1

4

Right audio

channel

Left audio

channel

Ground

11

1

Quick Setup Guide

Quick Setup

Guide

Front audio W

Audio (Rear Audio and Front Audio)

Mic-in

Line-out

Line-in

W

Rear audio

1

2

10

9

MicGND

Mic Power

AuD_Vcc

AuD_R_Out

AuD_R_Return

N. C.

Key

AuD_L_Out

AuD_L_Return

Light Blue

Lime

Pink

2-channel

Line-in

Line-out

Mic-in

4-channel

Rear R/L

Front R/L

Mic-in

6-channel

Rear R/L

Front R/L

Center/Subwoofer

12

Quick Setup Guide

1

Quick Setup

Guide

Important:

Before creating RAID, make sure you have installed the Serial/Parallel

ATA drives and connected the data cables otherwise you won’t be

able to enter the NVIDIA RAID BIOS utility.

Floppy Disk Drive Connector

X

34

33

21

Serial ATA Connectors

X

SATA 3 (J2)

17

SATA 4 (J10)

17

SATA 2 (J11)

17

SATA 1 (J13)

17

13

1

Quick Setup Guide

Quick Setup

Guide

IDE Disk Drive Connector

X

40

39

21

IDE 2

40

39

21

IDE 1

Important:

Before creating RAID, make sure you have installed the Serial/Parallel

ATA drives and connected the data cables otherwise you won’t be

able to enter the NVIDIA RAID BIOS utility.

Cooling Fan Connectors

X

CPU fan

1

3

Ground

Power

Sense

System fan

Chipset fan

31

Ground

Power

Sense

31

Ground

Power

Sense

14

Quick Setup Guide

1

Quick Setup

Guide

Note:

The sequence of the pin functions on some IR cable may be

reversed from the pin function defined on the system board. Make

sure to connect the cable connector to the IR connector according to

their pin functions.

IrDA Connector

W

51

VCC

N. C.

IRRX

Ground

IRTX

LEDs

Standby

Power LED

DRAM

Power LED

15

1

Quick Setup Guide

Quick Setup

Guide

Important:

To ensure that adequate power is provided, we strongly recommend

that you use a minimum of 400 Watt (or greater) power supply.

Power Connectors

X

4

3

1

2

+12V

Ground

+12V

13 1

1224

+3.3VDC

COM

+5VDC

COM

+5VDC

COM

PWR_OK

+5VSB

+12VDC

+3.3VDC

-12VDC

COM

PS_ON#

COM

NC

+5VDC

COM

5V/12V

1

4

+5V+12V

Ground

X

PCI Express Slots

PCI Express x16

PCI Express x1

PCI Express x16

16

Quick Setup Guide

1

Quick Setup

Guide

Front Panel Connectors

X

J19

1

2

19

20

HD-LED

PWR-LED

ATX-SW

RESET

SPEAKER

3

5

14

16

8

10

18

20

7

9

13

15

17

19

2

4

6

HD-LED

(Primary/Secondary IDE LED)

Reserved

ATX-SW

(ATX power switch)

Reserved

RESET

(Reset switch)

SPEAKER

(Speaker connector)

PWR-LED

(Power/Standby LED)

Pin Assignment

HDD LED Power

HDD

N. C.

PWRBT+

PWRBT-

N. C.

Ground

H/W Reset

Speaker Data

N. C.

Ground

Speaker Power

LED Power (+)

LED Power (-) or Standby Signal

17

2

English

Chapter 2 - English

Features and Specifications

Processor

• AMD Athlon

TM

64 FX / Athlon

TM

64 / Sempron

TM

• 2000MT/s HyperTransport interface

• Socket 939

Chipset

• NVIDIA nForce4

TM

SLI

- Supports NVIDIA SLI

TM

(Scalable Link Interface)

System Memory

• Four 184-pin DDR SDRAM DIMM sockets

• Supports dual channel (128-bit wide) memory interface

• Supports up to 4GB system memory

• Supports PC2100 (DDR266), PC2700 (DDR333) and PC3200

(DDR400) DDR SDRAM DIMM

• Supports x8/x16 ECC/non-ECC unbuffered DIMMs, up to

512Mb DDR devices

Expansion Slots

• 2 PCI Express x16 slots (operates at x8 bandwidth)

• 2 PCI Express x1 slots

• 3 PCI slots

SLI (Scalable Link Interface) Mode

• Use 2 SLI-ready PCI Express x16 graphics cards (use identical

cards) on the PCI Express x16 slots.

• In SLI mode, the bandwidth of each x16 slot works at the

bandwidth of x8. When the graphics cards are connected via the

SLI bridge, it runs at x16 bandwidth.

BIOS

• Award BIOS

• 4Mbit flash memory

Energy Efficient Design

• Supports ACPI specification and OS Directed Power

Management

• Supports ACPI STR (Suspend to RAM) function

18

English

2

English

• Wake-On-Events include:

- Wake-On-PS/2 Keyboard/Mouse

- Wake-On-USB Keyboard/Mouse

- Wake-On-LAN

- Wake-On-Ring

- RTC timer to power-on the system

• AC power failure recovery

Hardware Monitor

• Monitors CPU/system temperature

• Monitors VCC3/12V/3.3V/5VSB/Vbat voltages

• Monitors the speed of the cooling fans

• CPU Overheat Protection function monitors CPU temperature

during system boot-up

Onboard Audio Features

• 6-channel audio CODEC

• True stereo line level outputs

• S/PDIF-in/out interface

Onboard LAN Features

• Marvell 88E1111 Gigabit Phy

• Fully compliant to IEEE 802.3 (10BASE-T), 802.3u (100BASE-TX)

and 802.3ab (1000BASE-T) standards

• Integrated power management functions

• Supports wire for management

IDE Interface with NVIDIA RAID

• Supports two IDE connectors that allow connecting up to four

UltraDMA 133Mbps hard drives

• NVIDIA RAID allows RAID arrays spanning across Serial ATA

and Parallel ATA

• RAID 0, RAID 1, RAID 0+1 and JBOD

Serial ATA Interface with NVIDIA RAID

• Supports four Serial ATA ports

• SATA speed up to 3Gb/s

• NVIDIA RAID allows RAID arrays spanning across Serial ATA

and Parallel ATA

• RAID 0, RAID 1, RAID 0+1 and JBOD

19

2

English

IEEE 1394 Interface

• VIA VT6307

• Supports two 100/200/400 Mb/sec ports

Rear Panel I/O Ports

• 1 mini-DIN-6 PS/2 mouse port

• 1 mini-DIN-6 PS/2 keyboard port

• 2 S/PDIF RCA jacks (S/PDIF-in and S/PDIF-out)

• 1 parallel port

• 1 serial port

• 1 IEEE 1394 port

• 1 RJ45 LAN port

• 4 USB 2.0/1.1 ports

• Line-in, line-out and mic-in jacks

I/O Connectors

• 3 connectors for 6 additional external USB 2.0/1.1 ports

• 1 connector for 1 external IEEE 1394 port

• 1 front audio connector for external line-out and mic-in jacks

• 1 CD-in internal audio connector

• 1 S/PDIF connector for optical cable connection

• 1 IrDA connector

• 4 Serial ATA connectors

• 2 IDE connectors

• 1 floppy connector

• 1 24-pin ATX power connector

• 1 4-pin ATX 12V power connector

• 1 5V/12V power connector

• 1 front panel connector

• 3 fan connectors

PCB

• ATX form factor

• 24.4cm (9.6") x 30.5cm (12")

20

English

2

English

Package Checklist

The system board package contains the following items:

; The system board

; A user’s manual

; One IDE cable

; One floppy cable

; Two Serial ATA data cables

; One Serial ATA power cable

; One “nVRAID Driver” diskette

; One I/O shield

; One “Mainboard Utility” CD

If any of these items are missing or damaged, please contact your

dealer or sales representative for assistance.

La page charge ...

Infinity NF4 SLI Manuel utilisateur

Infinity NF4 SLI Manuel utilisateur

dans d''autres langues

Autres documents