MK3XXX/4XXX Mounting Kits
Installation Guide
© 2015 Symbol Technologies, Inc.
Zebra reserves the right to make changes to any product to improve reliability, function,
or design.
Zebra does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under
any patent right or patent, covering or relating to any combination, system, apparatus,
machine, material, method, or process in which Zebra products might be used. An
implied license exists only for equipment, circuits, and subsystems contained in Zebra
products.
Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The Symbol
logo is a registered trademark of Symbol Technologies, Inc., a Zebra Technologies
company.
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com
Warranty
For the complete Zebra hardware product warranty statement, go to:
http://www.zebra.com/warranty
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com
Zebra and the Zebra head graphic are registered trademarks of ZIH
Corp. The Symbol logo is a registered trademark of Symbol
Technologies, Inc., a Zebra Technologies company.
© 2015 Symbol Technologies, Inc
.
72-169370-02 Revision A — February 2015
Introduction
This guide provides instructions for mounting the MK3XXX and MK4XXX
using the Wall Mount Kit and Pole Mount Kit.
Using the MK3XXX/MK4XXX Wall Mount Kit
Securing the Mounting Plate
Determine the mounting location and the orientation of the power adapter
behind the mounting plate.
Configuration 1: Power Port Facing Down
1. Secure the mounting plate to the wall using the four mounting screws
provided.
2. Slide the power adapter down into the plate with the power port facing
down.
3. Plug the power supply into the power adapter.
Configuration 2: Power Port Facing Up
1. Plug the power supply into the power adapter.
2. Position the power adapter behind the mounting plate with the power port
facing up and the power connector routing between the two bottom tabs.
3. Secure the mounting plate to the wall using the four mounting screws
provided.
Mounting
Screws (4)
Mounting Plate
Power Adapter
Power Supply
Mounting Plate
Power Adapter
Power Supply
Power Connector
Mounting Screws (4)
Power Connector
Mounting the MK3XXX/4XXX on the Mounting Plate
1. Insert the four shoulder screws provided into the mounting holes in the
back of the MK3XXX/MK4XXX.
2. Connect the power adapter to the power port in the back of the
MK3XXX/MK4XXX.
3. Connect other required cables and route and secure them properly.
4. Mount the MK3XXX/MK4XXX by placing the shoulder screws through the
four keyholes on the mounting plate, and slide the MK3XXX/MK4XXX over
and down to secure.
5. Insert the locking screw through the hole in the tab at the side of the
mounting plate. Hand tighten the screw to secure the MK3XXX/MK4XXX.
Using the MK3XXX/MK4XXX Pole Mount Kit
To mount the MK3XXX/MK4XXX to a pole using the Pole Mount Kit:
1. Insert the four shoulder screws provided into the mounting holes in the
back of the MK3XXX/MK4XXX.
2. Connect the cables to the MK3XXX/MK4XXX and route and secure them
properly. Position the power adapter behind the mounting plate. See
Securing the Mounting Plate.
3. Secure the mounting plate to the pole mount bracket using the four
mounting screws provided.
4. Mount the MK3XXX/MK4XXX by placing the shoulder screws through the
four keyholes on the mounting plate, and slide the MK3XXX/MK4XXX over
and down to secure.
5. Route the pole mount straps through the mounting bracket. Wrap them
around the pole and tighten.
6. Insert the locking screw through the hole in the tab at the side of the
mounting plate. Hand tighten the screw to secure the MK3XXX/MK4XXX.
Waste Electrical and Electronic Equipment (WEEE)
English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling.
For information on how to return product, please go to: http://www.zebra.com/weee.
Bulgarish: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да се
връщат на Zebra за рециклиране. За информация относно връщането на продукти, моля отидете
на адрес: http://www.zebra.com/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti vrátit spoleènosti
Zebra k recyklaci. Informace o zpùsobu vrácení produktu najdete na webové stránce:
http://www.zebra.com/weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er udtjent. Læs
oplysningerne om returnering af produkter på: http://www.zebra.com/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum
Recycling an Zebra zurückgesandt werden. Informationen zur Rücksendung von Produkten finden Sie
unter http://www.zebra.com/weee.
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας ζωής τους,
πρέπει να
επιστρέφονται στην Zebra για ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την επιστροφή
ενός προϊόντος, επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee στο Διαδίκτυο.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil
Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi:
http://www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Zebra al final
de su ciclo de vida para que sean reciclados. Si desea más información sobre cómo devolver un pro-
ducto, visite: http://www.zebra.com/weee.
Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être
retournés à Zebra pour recyclage. Pour de plus amples informations sur le retour de produits,
consultez: http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono
essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalità di restituzi-
one, visitare il seguente sito Web: http://www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ Zebra otr-
reizējai pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu Zebra, lūdzu, skatiet:
http://www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti grąžinti utilizuoti į
kompaniją „Zebra“. Daugiau informacijos, kaip gr
ąžinti gaminį, rasite: http://www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra vállalathoz kell eljuttatni újra-
hasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el a
http://www.zebra.com/weee weboldalra.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu rri-
tornati għand Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk jogħġbok
żur: http://www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar
Zebra te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer
informatie over het terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji nale¿y zwróciæ do firmy
Zebra w celu ich utylizacji. Informacje na temat zwrotu produktów znajduj¹ siê na stronie internetowej
http://www.zebra.com/weee.
Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Zebra para
reciclagem. Para obter informações sobre como devolver o produto, visite: http://www.zebra.com/weee.
Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de funcţionare, trebuie retur-
nate la Zebra pentru reciclare. Pentru informaţii despre returnarea produsului, accesaţi:
http://www.zebra.com/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po uplynutí doby ich životnosti
vrátené spoločnosti Zebra na recykláciu. Bližšie informácie o vrátení výrobkov nájdete na:
http://www.zebra.com/weee.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Zebra za
reciklažo. Za informacije o vraèilu izdelka obišèite: http://www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Zebra-
yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa
http://www.zebra.com/weee.
Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Zebra för
återvinning. Information om hur du returnerar produkten finns på http://www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için Zebra'ya iade
edilmelidir. Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu adresi ziyaret edin:
http://www.zebra.com/weee.
Service Information
If you have a problem using the equipment, contact your facility’s Technical or Systems
Support. If there is a problem with the equipment, they will contact Zebra Support at:
http://www.zebra.com/support
For the latest version of this guide go to: http://www.zebra.com/support
Shoulder Screws (4)
Power Adapter
Power Port
Locking Screw
Shoulder Screws (4)
Mounting Plate
Mounting Screws (4)
Pole Mount Bracket
Pole Mount Straps
Locking Screw
-
1
-
2
Zebra MK3XXX/4XXX Guide d'installation
- Taper
- Guide d'installation
- Ce manuel convient également à
dans d''autres langues
- English: Zebra MK3XXX/4XXX Installation guide
Documents connexes
-
Zebra MK3000 Guide de référence
-
Zebra MK3100/3190 Guide de référence
-
-
-
-
-
-
Zebra DS9208 Guide de démarrage rapide
-
-