Samsung HT-D350 Le manuel du propriétaire

Digital Home

Entertainment System

user manual

Imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

HT-D350

HT-D355

HT-D350-XU_ENG-0310.indd 1 2011-03-11 �� 4:55:52

2 English

English 3

Safety Information



TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.



RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates “dangerous voltage”

inside the product that presents a risk of

electric shock or personal injury.

CAUTION :

TO PREVENT ELECTRIC

SHOCK, MATCH WIDE BLADE OF PLUG TO

WIDE SLOT, FULLY INSERT.

This symbol indicates important

instructions accompanying the

product.

WARNING

To reduce the risk of re or electric shock, do

not expose this appliance to rain or moisture.

CAUTION

Apparatus shall not be exposed to dripping or splashing

and no objects lled with liquids, such as vases, shall be

placed on the apparatus.

The Mains plug is used as a disconnect device and shall

stay readily operable at any time.

This apparatus shall always be connected to an AC outlet

with a protective grounding connection.

To disconnect the apparatus from the mains, the plug

must be pulled out from the mains socket, therefore the

mains plug shall be readily operable.

~

 

 

 

 

 

CLASS 1 LASER PRODUCT

This Compact Disc player is classied as a CLASS

1 LASER product.

Use of controls, adjustments or performance of

procedures other than those specied herein may

result in hazardous radiation exposure.

CAUTION

INVISIBLELASERRADIATIONWHENOPENAND

INTERLOCKSDEFEATED,AVOIDEXPOSURETOBEAM.

~



IMPORTANT NOTICE

The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated

on the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used.

Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of

the same colour as the fuse fitted in the plug. Replacement covers are available from your dealer. If the fitted plug is not

suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a

suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative to cutting

off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a mains socket as there is

a risk of shock hazard from the bared flexible cord. Never attempt to insert bare wires directly into a mains socket. A

plug and fuse must be used at all times.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:– BLUE = NEUTRAL BROWN

= LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug,

proceed as follows:–The wire coloured BLUE must be connected to the terminal marked with the letter N or

coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the let-

ter L or coloured BROWN or RED.

WARNING :

DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH LETTER E OR

BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.

HT-D350-XU_ENG-0310.indd 2 2011-03-11 �� 4:55:52

2 English

English 3



Check for the supplied accessories below.

1 2 3

4 5 6

7 8

0

9

FUNCTION

TV SOURCE

DSP / EQ

A B C D

S/W LEVEL

REPEAT USB REC DIMMER

TUNER

MEMORY

MO/ST

DISC

MENU

TITLE

INFO

GIGA

VOL

TV CH V

TUNING V

DVD RECEIVER

SELECT

SAMSUNG

TV

MUTE

POWER

P L

TOOLS

Video Cable FM Antenna

User manual

Remote Control/Batteries

(AAA size)

Scart Adapter

(Europe only)



Ensure that the AC power supply in your house complies with the identication sticker located on the back of your product.

Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm).

Do not place the product on ampliers or other equipment which may become hot.

Make sure the ventilation slots are not covered.

Do not stack anything on top of the product.

Before moving the product, ensure the Disc Insert Hole is empty.

In order to disconnect the product completely from the power supply, remove the AC plug from the wall outlet, especially when left

unused for a long period of time.

During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the

product.

Do not expose the product to direct sunlight or other heat sources. This could lead to overheating and malfunction of the

product.

Protect the product from moisture, and excess heat or equipment creating strong magnetic or electric elds (i.e.

speakers.).

Disconnect the power cable from the AC supply if the product malfunctions.

Your product is not intended for industrial use. Use of this product is for personal use only.

Condensation may occur if your product or disc has been stored in cold temperatures. If transporting the product during

the winter, wait approximately 2 hours until the product has reached room temperature before using.

The batteries used with this product contain chemicals that are harmful to the environment.

Do not dispose of batteries in the general household trash.

~

HT-D350-XU_ENG-0310.indd 3 2011-03-11 �� 4:55:53

4 English

English 5



Small scratches on the disc may reduce sound and

picture quality or cause skipping.

Be especially careful not to scratch discs when

handling them.

Holding discs

Do not touch the playback side of the disc.

Hold the disc by the edges so that

ngerprints will not get on the surface.

Do not stick paper or tape on the disc.

Disc Storage

Do not keep in direct sunlight

Keep in a cool ventilated area

Keep in a clean Protection jacket.

Store vertically.

NOTE

Do not allow the discs to become contaminated with dirt.

Do not load cracked or scratched discs.

Handling and Storing Discs

If you get fingerprints or dirt on the disc, clean it with a

mild detergent diluted in water and wipe with a soft cloth.

When cleaning, wipe gently from the inside to the

outside of the disc

NOTE

Condensation may form if warm air comes into contact

with cold parts inside the product. When condensation

forms inside the product, it may not operate correctly. If

this occurs, remove the disc and let the product stand

for 1 or 2 hours with the power on.

~

✎

`

~

✎

`



Dolby and the double-D symbol are registered trademarks of Dolby

Laboratories.

ABOUT DIVX VIDEO: DivX® is a digital video format

created by DivX, Inc. This is an ofcial DivX Certied

device that plays DivX video. Visit www.divx.com for more information

and software tools to convert your les into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certied® device must be

registered in order to play DivX Video-on-Demand (VOD) content. To

generate the registration code, locate the DivX VOD section in the device

setup menu. Go to vod.divx.com with this code to complete the

registration process and learn more about DivX VOD.

DivX Certied® to play DivX ® video

DivX®, DivX Certied® and associated logos are trademarks of DivX,

Inc. and are used under license.

Pat. 7,295,673; 7,460,668; 7,515,710; 7,519,274

HDMI, the HDMI Logo, and High-Denition

Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC in the United States and other countries.

This item incorporates copy protection technology that is protected by U.S.

patents and other intellectual property rights of Rovi Corporation. Reverse

engineering and disassembly are prohibited.



reserved.



Many DVD discs are encoded with copy protection.

Because of this, you should only connect your product

directly to your TV, not to a VCR. Connecting to a VCR

results in a distorted picture from copy-protected DVD

discs.

~

Safety Information

HT-D350-XU_ENG-0310.indd 4 2011-03-11 �� 4:55:53

4 English

English 5

Contents

ENGLISH



2 Safety Warnings

3 Precautions

3 Accessories

4 Cautions on Handling and Storing Discs

4 Licence

4 Copyright

4 Copy Protection



6 Icons that will be used in manual

6 Disc Types and Characteristics

9 Description

9 Front Panel

9 Rear Panel

10 Remote control



11 Connecting the Speakers

14 Connecting the Video Out to your TV

16 Connecting the FM Antenna

17

Connecting Audio from External Components



18 Before Starting (Initial Settings)

18 Setting the Setup menu

19 Display

19 TV Aspect

19 BD Wise

19 Resolution

19 HDMI Format

19 Video Out Signal

19 Audio

19 Speaker Setting

21 DRC (Dynamic Range Compression)

21 AUDIO SYNC

21 HDMI AUDIO

21 System

21 Initial Settings

21 DivX(R) Registration

21 Language

22 Security

22 Parental Rating

22 Change Password

22 Support

22 Product Information



22 Disc Playback

23 Audio CD(CD-DA)/MP3/WMA Playback

23 JPEG File Playback

24 Using the Playback Function

27 Sound Mode

28 Listening to Radio



29 USB Function

29 USB Recording



30 Troubleshooting

31 Language code list

32 Specications

Figures and illustrations in this User Manual are

provided for reference only and may differ from actual

product appearance.

A

n administration fee may be charged if either

an engineer is called out at your request and there

is no defect in the product

(i.e. where you have failed to read this user manual)

you bring the unit to a repair centre and there is no

defect in the product

(i.e. where you have failed to read this user

manual).

The amount of such administration charge will be

advised to you before any work or home visit is

carried out.

•

a.

b.

•

HT-D350-XU_ENG-0310.indd 5 2011-03-11 �� 4:55:54

6 English

Getting Started

English 7



Make sure to check the following terms before

reading the user manual.

Icon Term Denition

d

DVD

This involves a function

available with DVD-Video or

DVD±R/±RW discs that

have been recorded and

nalised in Video Mode.

B

CD

This involves a function

available with a data CD

(CD DA, CD-R/-RW).

A

MP3

This involves a function

available with CD-R/-RW

discs.

G

JPEG

This involves a function

available with CD-R/-RW

discs.

D

DivX

This involves a function

available with MPEG4 discs.

(DVD±R/±RW, CD-R/-RW)

!

CAUTION

This involves a case where a

function does not operate or

settings may be cancelled.

✎

NOTE

This involves tips or instructions

on the page that help each

function operate.

Shortcut

Key

This function provides direct and

easy access pressing the button

on the remote control.

Region Code

The product and the discs are coded by region. These

regional codes must match in order for the disc to play. If the

codes do not match, the disc will not play.

A DVD Video labeled

ALL

will also play on this system.



Disc types that can be played

Disc Types &

Mark (Logo)

Recorded

Signals

Characteristics

DVD-VIDEO

VIDEO

DVD video

DVD-R/DVD-RW IN DVD video

FORMAT

DVD+R/DVD+RW IN DVD

video FORMAT

AUDIO-CD

AUDIO AUDIO CD

DivX

AUDIO

+

VIDEO

AUDIO CD

CD-R/CD-RW in AUDIO CD

FORMAT

DATA CD

CD-R/CD-RW in DATA CD

FORMAT that contains the

following kinds of ﬁles and

conforms to ISO 9660 LEVEL

1/LEVEL 2, OR JOLIET

(EXTENDED FORMAT)

-MP3 ﬁles

-JPEG Image ﬁles

-MPEG 4 VIDEO ﬁles

DATA DVD

DVD-ROM/DVD-R/DVD-RW

DVD+R/DVD+RW IN DATA

DV FORMAT that contains

the following kinds of ﬁles

and conforms to

UDF(*Universal Disk Format)

-MP3 ﬁles

-JPEG Image ﬁles

-MPEG 4 VIDEO ﬁles

USB Device

USB Device that contains the

following kinds of ﬁles.

-MP3 FILE OR WMA/WMV

ﬁles

-JPEG Image ﬁles

-MPEG 4 Video ﬁles

HT-D350-XU_ENG-0310.indd 6 2011-03-11 �� 4:55:54

6 English

English 7

01 Getting Started

Do not use the following type of discs!

LD, CD-G, CD-I, CD-ROM, DVD-ROM and

DVD-RAM discs cannot be played on this product.

If such discs are played, a <WRONG DISC

FORMAT> message appears on the TV screen.

DVD discs purchased abroad may not play on this

product.

If such discs are played, a <Wrong Region. Please

check Disc.> message appears on the TV screen.

Disc Types And Disc Format

This product does not support Secure (DRM) Media les.

CD-R Discs

Some CD-R discs may not be playable depending on

the disc recording device (CD-Recorder or PC) and the

condition of the disc.

Use a 650MB/74 minute CD-R disc.

Do not use CD-R discs over 700MB/80 minutes as

they may not be played back.

Some CD-RW (Rewritable) media, may not be playable.

Only CD-Rs that are properly "closed" can be fully

played. If the session is closed but the disc is left open,

you may not be able to fully play the disc.

CD-R MP3 Discs

MP3 le names should contain no blank spaces

or special characters (. / = +).

Use discs recorded with a compression/

decompression data rate greater than 128Kbps.

If the disc is not closed, it will take longer to begin

playback and not all of the recorded les may be played.

For les encoded in Variable Bit Rate (VBR)

format, i.e. les encoded in both low bit rate and

high bit rate (e.g., 32Kbps ~ 320Kbps), the

sound may skip during playback.

A maximum of 500 tracks can be played per CD.

A maximum of 300 folders can be played per CD.

CD-R JPEG Discs

A maximum of 999 images can be stored on a folder.

When playing a Kodak/Fuji Picture CD, only the JPEG

les in the picture folder can be played.

Picture discs other than Kodak/Fuji Picture CDs may

take longer to start playing or may not play at all.

~

DVD±R/±RW, CD-R/RW Discs

Software updates for incompatible formats are not

supported.

(Example : QPEL, GMC, resolutions higher than

800 x 600 pixels, etc.)

If a DVD-R/-RW disc has not been recorded

properly in DVD Video format, it will not be

playable.

Supported Formats (DivX)

This product only supports the following media formats.If both

video and audio formats are not supported, the user may

experience problems such as broken images or no sound.

Supported Video Formats

Format Supported Versions

AVI

DivX3.11~DivX5.1, XviD

WMV

V1/V2/V3/V7

Supported Audio Formats

Format Bit Rate

Sampling

Frequency

MP3

80~320kbps

44.1khz

WMA

56~128kbps

AC3

128~384kbps 44.1/48khz

Aspect Ratio : Although the default DivX resolution is

640x480 pixels, this product supports up to

720x480 pixels. TV screen resolutions higher than

800 will not be supported.

When you play a disc whose sampling frequency is

higher than 48khz or 320kbps, you may experience

shaking on the screen during playback.

Sections with a high frame rate might not be played

while playing a DivX le.

Since this product only provides encoding formats

authorized by DivX Networks, Inc., a DivX le

created by the user might not play.

~

HT-D350-XU_ENG-0310.indd 7 2011-03-11 �� 4:55:54

8 English

Getting Started

English 9

Notes on USB connection

Supported devices: USB storage media, MP3

player, digital camera

If a folder or le name is longer than 10

characters, it may not properly display or

operate.

A subtitle le bigger than 300KB may not be

properly displayed.

A certain USB/digital camera device, USB card

reader is not supported.

FAT16 and FAT32 le systems are supported.

Photo (JPEG), music (MP3, WMA) and video le

should have their names in Korean or English.

Otherwise, the le may not played.

Connect directly to the product's USB port.

Connecting through another cable may raise

problems with USB compatibility.

Inserting more than one memory device to a

multi-card reader may not operate properly.

PTP protocol for digital camera is not supported.

Do not disconnect USB device during a

"Reading" process.

Bigger the image resolution, the longer the delay

to displaying.

DRM applied MP3/WMA or video les

downloaded from a commercial site are not

played back.

External HDD device is not supported.

The maximum current supported by the USB

port for an external device is 500 mA (at 5V DC).

1)

2)

3)

4)

5)

6)

7)

8)

9)

10)

11)

12)

13)

Supported le formats

Format

Still

Picture

Music Movie

File name

JPG MP3 WMA WMV DivX

File

extension

JPG

.JPEG

.MP3 .WMA .WMV .AVI

Bit rate

–

80~320

kbps

56~128

kbps

4Mbps 4Mbps

Version

– –

V8

V1,V2,

V3,V7

DivX3.11~

DivX5.1,

XviD

Pixel

640x480

– –

720x480

Sampling

Frequency

–

44.1kHz 44.1kHz

44.1KHz~ 48KHz

14)

HT-D350-XU_ENG-0310.indd 8 2011-03-11 �� 4:55:54

8 English

English 9

01 Getting Started



Front Panel

Rear Panel

SURROUND SURROUND

SUBWOOFER

CENTER FRONTFRONT

SPEAKERS OUT

SPEAKER IMPEDANCE : 3

FM ANT

VIDEO OUT

AUX IN

COMPONENT OUT

HDMI OUT

DIGITAL

AUDIO IN

ONLY

FOR SERVICE

 



SPEAKER OUTPUT

CONNECTORS



ONLY FOR SERVICE



EXTERNAL DIGITAL OPTICAL IN

JACK (DIGITAL AUDIO IN)



HDMI OUT JACK



COMPONENT VIDEO OUTPUT

JACKS



FM ANTENNA JACK



VIDEO OUT JACK



AUX IN JACKS

  

 

5V 500mA

     



DISC TRAY



DISPLAY



USB PORT



OPEN/CLOSE BUTTON

(

)



FUNCTION BUTTON

(

)



STOP BUTTON

(

)



PLAY/PAUSE BUTTON

(

)



VOLUME CONTROL

BUTTON

( , )



POWER BUTTON (

)



REMOTE CONTROL SENSOR



HT-D350-XU_ENG-0310.indd 9 2011-03-11 �� 4:55:55

10 English

Getting Started

English 11



Tour of the Remote Control

Installing batteries in the Remote Control

NOTE

Place batteries in the remote control so they match the

polarity : (+) to (+) and (–) to (–).

Always replace both batteries at the same time.

Do not expose the batteries to heat or ame.

The remote control can be used up to approximately 7

meters in a straight line.

The remote control will work on a Samsung TV.

✎

`

* Battery size: AAA

1 2 3

4 5 6

7 8

0

9

FUNCTION

TV SOURCE

DSP / EQ

A B C D

S/W LEVEL

REPEAT USB REC DIMMER

TUNER

MEMORY

MO/ST

DISC

MENU

TITLE

INFO

GIGA

VOL

TV CH V

TUNING V

DVD RECEIVER

SELECT

SAMSUNG

TV

MUTE

POWER

P L

TOOLS

Turn the

product

on and off.

Allow access to common functions

of the product such as the Photo

List.

A. TITLE button : Press to check

the title menu.

B. DISC MENU button : Press to

check the disc menu.

Press numeric button to operate options.

or

1. PLII button : Select the desired Dolby

Pro Logic II audio mode, P.Bass or MP3

enhancement function.

2. DSP/EQ

button : Select the desired

DSP/EQ audio mode.

3. S/W

LEVEL button : Used to adjust the

level of the subwoofer.

4. REPEAT button : Allows you to repeat a

title, chapter, track or disc.

Adjust the volume up/down.

Press to skip forwards /Change channels up.

Press to select TV.

Exit the menu.

Return to the previous menu.

To open and close the disc tray.

Press to select TV's video mode.

or

This is mode selection button.

Press to pause a disc.

Press numeric button to operate options.

or

5. USB REC button : Used to start USB

recording.

6. DIMMER button : Adjust the

brightness of Display.

7. INFO button :Display current disc(file)

status.

8.GIGA button : Used to turn on/off

GIGA Sound function.

Cut off the sound temporarily.

C. MO/ST button : Press to listen

in Mono/Stereo in the FM mode.

D. TUNER MEMORY button :

Press to preset FM stations.

Press this to move to the home

menu.

Press to stop/play a disc.

Press to skip backwards.

/Change channels down.

Select on-screen menu items and

change menu value.

Used to change the audio/subtitle

language, angle etc.

Press to select the DVD RECEIVER

mode.

Press to search backwards or

forwards.

HT-D350-XU_ENG-0310.indd 10 2011-03-11 �� 4:55:56

10 English

English 11

02 Connections

This section involves various methods of connecting the product to other external components.

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.



Front Speakers

ei

Place these speakers in front of your listening position, facing inwards (about 45°)

toward you. Place the speakers so that their tweeters will be at the same height

as your ear. Align the front face of the front speakers with the front face of the

center speaker or place them slightly in front of the center speakers.

Center Speaker

f

It is best to install it at the same height as the front speakers. You can also install it

directly over or under the TV.

Surround Speakers

hj

Place these speakers to the side of your listening position.

If there isn't enough

room, place these speakers so they face each other. Place them about 60 to

90cm above your ear, facing slightly downward.

*

Unlike the front and center speakers, the surround speakers are used to

handle mainly sound effects and sound will not come from them all the time.

Subwoofer

g

The position of the subwoofer is not so critical. Place it anywhere you like.

Position of the product

Place it on a stand or cabinet shelf, or under the

TV stand.

Selecting the Listening Position

The listening position should be located about 2.5

to 3 times the distance of the TV's screen size

away from the TV.

Example : For 32" TV's 2~2.4m

For 55" TV's 3.5~4m

SW

CAUTION

Do not let children play with or near the speakers. They could get hurt if the speaker falls.

When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.

Keep the subwoofer out of the reach of children so as to prevent them from inserting their hands or alien

substances into the duct (hole) of the subwoofer.

Do not hang the subwoofer on the wall through the duct (hole).

NOTE

If you place a speaker near your TV set, screen colour may be distorted because of the magnetic eld

generated by the speaker. If this occurs, place the speaker away from your TV set.



`

✎

`

Connections

HT-D350-XU_ENG-0310.indd 11 2011-03-11 �� 4:55:56

12 English

Connections

English 13

Speaker Components

SPEAKERCABLE

FRONT



(L) (R)

SUBWOOFER



SURROUND

(L) (R)

CENTER

Speaker Components Assembled Speakers

HT-D355



FRONT



SURROUND

(L) (R)

STAND



STANDBASE



(L) (R)

SCREW (5×15): 4EA



SCREW (4×20): 16EA



SUBWOOFER



CENTER SPEAKER

FRONT/SURROUND

SPEAKER

SUBWOOFER



CENTER



HT-D350

Installing the Speakers on the Tallboy Stand

* HT-D355 only - Front/Surround Speakers

Turn the Stand Base upside-down and connect it to

the Stand.

Insert small screws (4*20, For connecting Stand & Stand

Base) clockwise into the four holes marked using a

screwdriver as shown in the illustration.

CAUTION : When you use a torque screwdriver, be

careful not to put excessive force. Otherwise, it runs

idle or can be damaged. (torque screwdriver- below

15 kg.f.cm)





!

 

Stand

Base

HT-D355

SPEAKERCABLE

HT-D350-XU_ENG-0310.indd 12 2011-03-11 �� 4:56:08

12 English

English 13

02 Connections

Connecting The Speakers

Press down the terminal tab on the back of the speaker.

Insert the black wire into the black terminal (–) and the red wire into the red

terminal (+), and then release the tab.

Connect the connecting plugs to the back of the product by matching the

colours of the speaker plugs to the speaker jacks.







Black

Red

Connecting the wall mount

Connect the speaker cord with the colour

tube to (+), and the speaker cord without the

colour tube to (–).

Prepare screws (not supplied) that are suitable

for the hole on the back of each speaker.

See the illustrations below.

Fasten the screws to the wall, then hang the

speaker on the wall.







Colour tube

Front left speaker (L) : White

Front right speaker (R) : Red

Center speaker : Green

Surround left speaker (L) : Blue

Surround right speaker (R) : Gray

5 mm

10 mm

Hole on the back of the speaker

30 mm

4 mm

8 to 10 mm

Depth of fastened screw

Connect the upper Speaker to the assembled Stand.

Insert another large

screw (5*15, For connecting Speaker

& Stand)

clockwise into the hole on the rear of the

speaker using a

screwdriver.

This is the appearance after the speaker is installed.

Follow this steps to install other speaker.













Stand

Speaker

HT-D350-XU_ENG-0310.indd 13 2011-03-11 �� 4:56:10

14 English

Connections

English 15



Choose one of the four methods for connecting to a TV.

METHOD 1 : HDMI

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN

jack on your TV.

METHOD 2 : Component Video

If your television is equipped with Component Video inputs, connect a Component video cable(not supplied)

from the COMPONENT OUT (PR, PB and Y) jacks on the back of the product to the Component Video Input

jacks on your TV.

METHOD 3 : Scart (Europe only)

If your television is equipped with a SCART input, connect the supplied video cable from the VIDEO OUT jack

on the back of the product to the VIDEO jack on the Scart adapter (Europe only), then connect the SCART

adapter's jack to the SCART IN jack on your television.

METHOD 4 : Composite Video

Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack

on your TV.

SURROUND SURROUND

SUBWOOFER

CENTER FRONTFRONT

SPEAKERS OUT

SPEAKER IMPEDANCE : 3

FM ANT

VIDEO OUT

AUX IN

COMPONENT OUT

HDMI OUT

DIGITAL

AUDIO IN

ONLY

FOR SERVICE

SCART IN

METHOD 4

(supplied)

METHOD 3

(Europe only)

Green

BlueRed

METHOD 1

METHOD 2

HT-D350-XU_ENG-0310.indd 14 2011-03-11 �� 4:56:11

14 English

English 15

02 Connections

NOTE

Resolutions available for the HDMI output are 480p(576p), 720p,1080i/1080p. See page 19 for the resolution

setting.

This product operates in Interlace scan mode 480i(576i) for component/composite output.

After making the video connection, set the Video input source on your TV to match the corresponding Video

output mode on your product.

Turn this product on rst before you set the video input source on your TV. See your TV owner's manual for

more information on how to select the TV's Video Input source.

CAUTION

Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright

protection systems and the picture will be distorted on the television.

HDMI FUNCTION

HDMI Auto Detection Function

The product's video output will automatically change to HDMI mode when connecting an HDMI cable while power is on.

HDMI (High Denition Multimedia Interface)

HDMI is an interface that enables the digital transmission of video and audio data with just a single

connector. Using HDMI, the product transmits a digital video and audio signal and displays a vivid picture

on a TV having an HDMI input jack.

HDMI connection description

- HDMI outputs only a pure digital signal to the TV.

-

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears

on the screen.

What is the HDCP?

HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via

HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a

display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized

copies from being made.

Using Anynet+(HDMI-CEC)

Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote

control. Anynet + can be used by connecting this product to a SAMSUNG TV using a HDMI Cable. This is

only available with SAMSUNG TV's that support Anynet+.

Connect the product to a Samsung TV with an HDMI cable. (See page 14)

Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)

NOTE

The Anynet+ function supports some buttons of the remote control.

This function is not available if an HDMI cable does not support CEC.

Depending on your TV, certain HDMI output resolutions may not work.

Please refer to the user’s manual of your TV.

Please check the

logo (If your TV has an

logo, then it supports Anynet+ function.)

✎

`

!

`

~





✎

`

HT-D350-XU_ENG-0310.indd 15 2011-03-11 �� 4:56:11

16 English

Connections

English 17



Connect the FM antenna supplied to the FM Antenna jack.

Slowly move the antenna wire around until you nd a location where reception is good, then fasten it to a

wall or other rigid surface.

NOTE

This product does not receive AM broadcasts.





✎

`

SURROUND SURROUND

SUBWOOFER

CENTER FRONTFRONT

SPEAKERS OUT

SPEAKER IMPEDANCE : 3

FM ANT

VIDEO OUT

AUX IN

COMPONENT OUT

HDMI OUT

DIGITAL

AUDIO IN

ONLY

FOR SERVICE

FM Antenna (supplied)

HT-D350-XU_ENG-0310.indd 16 2011-03-11 �� 4:56:12

16 English

English 17

02 Connections



SURROUND SURROUND

SUBWOOFER

CENTER FRONTFRONT

SPEAKERS OUT

SPEAKER IMPEDANCE : 3

FM ANT

VIDEO OUT

AUX IN

COMPONENT OUT

HDMI OUT

DIGITAL

AUDIO IN

ONLY

FOR SERVICE

Optical Cable

(not supplied)

Audio Cable (not supplied)

If the external analogue

component has only one Audio

Out, connect either left or right.

Set-Top Box

VCR

AUX

OPTICAL

WhiteRed

AUX : Connecting an External Analogue Component

Analogue signal components such as a VCR.

Connect AUX IN (Audio) on the back of the product to the Audio Out of the external Analogue

component.

Be sure to match the colours of the connecting jacks.

Press the FUNCTION button to select AUX input.

The mode switches as follows :

DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM

NOTE

You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the

VCR to this product.

OPTICAL : Connecting an External Digital Component

Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).

Connect the DIGITAL AUDIO IN (OPTICAL) on the back of the product to the Digital Output of the

external digital component.

Press the FUNCTION button to select D.IN.

The mode switches as follows :

DVD/CD ➞ D.IN ➞ AUX ➞ USB ➞ FM



~



~

✎

`





~

HT-D350-XU_ENG-0310.indd 17 2011-03-11 �� 4:56:12

18 English

Setup

English 19



Press the POWER button when it is plugged in

TV for the rst time.

Initial Settings screen will be displayed.

>

Move

"

Select

Initial settings > On-Screen Language

Select a language for the on-screen displays

English

한국어

Nederlands

Français

Deutsch

Italiano

Press the ▲▼ buttons to select the desired

language, then press the ENTER button.

Press the ENTER button to select Start button.

Press the ▲▼ buttons to select desired TV Aspect,

then press the ENTER button.

NOTE

If you have not selected a preferred language in

the initial settings, you will see a language

selection window next time you turn on the

product.

Your language selection will apply to all menus:

On-Screen Menu, Disc Menu, Audio, Subtitle.

If you want to move to the previous screen, press the

RETURN button.

Once you select a menu language, you can change it by

pressing the STOP (@) button on the remote control for

more than 5 seconds with no disc inserted.

When the Initial Settings screen does not appear, refer to

the Initial Settings. (see page 21)









✎

`

Setting the Setup menu

The access step may differ depending on the selected

menu. The GUI (Graphical User Interface) in this

manual may differ, depending on the rmware version.

1 2 3

4 5 6

7 8

0

9

FUNCTION

TV SOURCE

DSP / EQ

A B C D

S/W LEVEL

REPEAT USB REC DIMMER

TUNER

MEMORY

MO/ST

DISC

MENU

TITLE

INFO

GIGA

VOL

TV CH V

TUNING V

DVD RECEIVER

SELECT

SAMSUNG

TV

MUTE

POWER

P L

TOOLS

1

2

3

4

1

MENU BUTTON : Display the home menu.

2

ENTER / DIRECTION BUTTON

Move the cursor and select an item.

Select the currently selected item.

Conrm the setting.

3

RETURN BUTTON : Return to the previous

setup menu.

4

EXIT BUTTON : Exit the setup menu.

Function DVD/CD

Settings

Press the POWER button.

Press the

_+

buttons to select Settings, then

press the ENTER button.

Press the

▲▼

buttons to select the desired

menu, then press the ENTER button.

Press the

▲▼

buttons to select the desired sub-

menu, then press the ENTER button.

Press the

▲▼

buttons to select the desired

item, then press the ENTER button.

Press the EXIT button to exit the setup menu.













HT-D350-XU_ENG-0310.indd 18 2011-03-11 �� 4:56:13

18 English

English 19

03 Setup



You can congure various display options such as

the TV Aspect, Resolution, etc.

TV Aspect

Depending on the type of television you have, you

may want to adjust the screen setting.

4:3 Pan-Scan

~

Select when you want to see the 16:9

video supplied by the DVD without the

black bars on top and bottom, even

though you have a TV with a 4:3 ratio

screen(extreme left and right portion of

the movie picture will be cut off).

4:3 Letter Box

~

Select when you want to see the total

16:9 ratio screen DVD supplies, even

though you have a TV with a 4:3 ratio

screen. Black bars will appear at the

top and bottom of the screen.

16:9 Wide

~

You can view the full 16:9 picture on

your widescreen TV.

NOTE

When using HDMI, the screen is automatically converted to the

16:9 Wide mode and TV Aspect is deactivated.

If a DVD is in the 4:3 ratio, you cannot view it in the wide screen.

Since DVD discs are recorded in various image formats, they will

look different depending on the software, the type of TV, and the

TV aspect ratio setting.

BD Wise

(Samsung products only)

BD Wise is Samsung's latest inter-connectivity

feature.

When you connect Samsung products with

BD-Wise to each other via HDMI, the optimum

resolution will be set automatically.

On : The original resolution of the DVD disc will

be output to the TV direct.

Off : The output resolution will be xed

according to the Resolution previously set,

regardless of the resolution of the disc.

✎

`

~

NOTE

This will optimize the picture quality according to the

content (In the DVD disc, etc) that you want to play and

the product or your BD Wise-compliant Samsung TV.

If you want to change the resolution in BD Wise mode,

you must set BD mode to Off in advance.

BD Wise will be disabled if the product is connected to

a device that does not support BD Wise.

Resolution

Sets the output resolution of the HDMI video signal. The

number in 480p(576p), 720p, 1080i and 1080p indicates

the number of lines of video.

The i and p indicate interlace and progressive scan,

respectively.

480p(576p) : Outputs 480 lines of progressive video.

720p : Outputs 720 lines of progressive video.

1080i : Outputs 1080 lines of interlaced video.

1080p : Outputs 1080 lines of progressive video.

BD Wise : Automatically sets the optimal resolution when

connected via HDMI to a TV with the BD Wise feature. (The

BD Wise menu item appears only if BD Wise is set to On.)

NOTE

If Component or Composite is connected, the

resolution supports only 480i(576i).

1080P may not appear depending on TV.

HDMI Format

You can optimize the colour setting from the HDMI

output. Select a connected device Type.

Monitor : Select if connected to a Monitor via HDMI.

TV : Select if connected to a TV via HDMI.

Video Out Signal

Different countries apply different TV standard.

You can select from NTSC or PAL.

NTSC :

You can select the NTSC video format

PAL :

You can select the PAL video format



Speaker Setting

Speaker Size

You can set the Speaker Size of the Center and Surround

Speakers, as well as Test Tone in this mode.

✎

`

~

✎

`

~

HT-D350-XU_ENG-0310.indd 19 2011-03-11 �� 4:56:15

20 English

Setup

English 21

Settings

m

Move

"

Select

'

Return

Speaker Setting

Speaker Size ▶

Sound Edit

Delay Time

T

est Tone : Off

Select Return

For the Front, the mode is set to Small.

For the Subwoofer, the mode is set to Present.

For the Center and Surround, you can switch the

mode to Small or None.

- Small : Select this when using the speakers.

- None :

Select this when no speaker is

connected.

NOTE

The speaker mode may vary depending on the

Dolby Pro Logic and Stereo settings.

Sound Edit

You can adjust the balance and level for each speaker.

Settings

m

Move

"

Select

'

Return

Sound Edit

<

Change

"

Select

'

Return

dB

Front Bal.

Surround

Bal.

Center Level

Surround Level

SW Level

R

L

Press the

▲▼

buttons to select and adjust the

desired speaker.

Press the

_+

buttons to adjust the settings.

Adjusting Front/Surround Bal.

You can select between 0 and -6.

The volume decreases as you move closer to –6.

Adjusting Center/Surround/Subwoofer Level

The volume level can be adjusted in steps from

+6dB to –6dB.

The sound gets louder as you move closer to +6dB

and quieter as you get closer to -6dB.

~

✎

`

Delay Time

If the speakers cannot be placed at equal distances from

the listening position, you can adjust the delay time of the

audio signals from the Center and Surround speakers.

You can also set the Test Tone in this mode.

Setting up the Speaker Delay Time

When 5.1CH Surround Sound is played, you can

enjoy the best sound if the distance between you

and each speaker is the same.

Since the sounds arrive at the listening position at

different times depending on the placement of

speakers, you can adjust this difference by adding a

delay effect to the Center and Surround Speakers.

Settings

m

Move

"

Select

'

Return

<

Change

"

Select

'

Return

Delay Time

Front

Center : 00ms

Surround :

10ms

Subwoofer

Test Tone :

Off

Test Tone

Settings

m

Move

"

Select

'

Return

Speaker Setting

Speaker Size

Sound Edit

Delay Time

Test Tone :

On ▶

"

Select

'

Return

Use the Test Tone feature to check the speaker

connections.

Press the

_+

buttons to select On.

The test tone will be sent to Front Left ➞ Center

➞ Front Right ➞ Surround Right ➞ Surround

Left ➞ Subwoofer in order.

To stop the test tone, press the ENTER button.

~

HT-D350-XU_ENG-0310.indd 20 2011-03-11 �� 4:56:15

La page charge ...

Samsung HT-D350 Le manuel du propriétaire

Samsung HT-D350 Le manuel du propriétaire

dans d''autres langues

Documents connexes