Samsung WEP870 Manuel utilisateur

World Wide Web

http://www.samsungmobile.com

Printed in Korea

Code No.: GH68-22944A

EU A. 07/2009. Rev.1.1

English ...................................................................................1

Français ...............................................................................25

Deutsch ...............................................................................49

Nederlands ..........................................................................73

English

1

Contents

Getting started

Your headset overview .......................................................... 3

Button functions ................................................................... 4

Icons .................................................................................. 5

Charging the headset ............................................................ 6

Wearing the headset ............................................................. 8

Connecting the neckstrap headset .......................................... 9

Using your headset

Turning the headset on or off ................................................10

Pairing and connecting the headset ........................................11

Using call functions ..............................................................13

Connecting the headset with a music device ............................15

Appendix

Frequently asked questions ...................................................17

Warranty and parts replacement ............................................19

Correct disposal of this product .............................................20

Correct disposal of batteries in this product .............................21

Specications ......................................................................22

2

Take the time to read through this user manual before using WEP870

Bluetooth Headset.

Bluetooth

®

is a registered trademark of the Bluetooth SIG, Inc.

worldwide—Bluetooth QD ID: B015170

More information about Bluetooth is available at www.bluetooth.com.

Safety precautions

Never disassemble or modify your headset for any reason. Doing this

may cause the headset to malfunction or become combustible. Bring

the headset to an authorised service centre to repair it or replace the

battery.

When using your headset while driving, follow local regulations in the

country or region you are in.

Avoid storage at high temperatures (above 50° C/122° F), such as in

a hot vehicle or in direct sunlight, as this can damage performance

and reduce battery life.

Do not expose the headset or any of its supplied parts to rain or other

liquids.

At very high volumes, prolonged listening to the headset can damage

your hearing.

•

English

3

Getting started

This section explains the proper use of your Bluetooth headset.

Your headset overview

Display

Volume button

Earpiece

Power button

Multifunction jack

Talk button

Ear hook

Primary

microphone

Secondary

microphone

Make sure you have the following items with your headset :

Travel adapter, neckstrap headset, and user manual.

The items supplied with your headset may vary depending on your region.

4

Button functions

Button Function

Power Slide up or down to turn the headset on or off.

Talk

Press to make or answer a call.

Press to end a call.

Press and hold to enter Pairing mode.

•

Volume

Press to adjust the volume.

During a call, press and hold to mute the

microphone.

•

You can hear a beep when the volume level of the headset reaches to the

lowest or highest level.

English

5

Icons

Icon Description

Battery power level

Bluetooth connection

On: Standby or Active mode

Blinking: Pairing with a Bluetooth enabled device

•

Call connection

On: Call in progress

Blinking: Making or receiving a call

•

6

Charging the headset

This headset has a rechargeable internal battery which is non-

removable. Charge the battery completely before using the headset for

the rst time.

1 Plug the small end of the travel adapter into the multifunction jack.

2 Plug the large end of the travel adapter into a power outlet.

During charging, the Battery icon will be moving.

If charging does not begin, slide the power button up to reset the

headset.

English

7

3 When the headset is fully charged, the Battery icon is no longer

moving. Unplug the travel adapter from the power outlet and the

headset.

Use only a Samsung-approved travel adapter. Unauthorised travel

adapters may cause an explosion or damage to the headset.

The battery will gradually wear out while charging or discharging because

it is a consumable part.

When a call comes in while charging, disconnect your headset from the

travel adapter and answer the call.

•

When the battery power is low

The headset beeps and the Battery icon is empty and blinking. Recharge

the battery. If the headsets powers off during a call, the call will

automatically transfer to your phone.

8

Wearing the headset

Place the headset on your ear.

Depending on what ear you are going to wear the headset, simply

remove and replace the ear hook.



Left



Right

English

9

Connecting the neckstrap headset

Use the supplied neckstrap headset to listen to music.

To use the neckstrap headset, plug the

connector of the neckstrap headset into

the multifunction jack on the headset.

To remove the neckstrap headset,

squeeze both sides of the connector and

unplug the neckstrap headset from the

headset.

For your safety, make sure the neckstrap headset does not get in the

way of your arm or other surrounding objects while you are taking

exercise or a walk.

When you make or answer a call by using the neckstrap headset, place

the primary microphone of the headset close to your mouth to speak.

In this case, the secondary microphone that reduces background noise

will be deactivated.

•

10

Using your headset

This section explains how to turn the headset on, pair and connect to

the phone, and use various functions.

Activated functions and features may differ depending on your type of

phone.

Some devices, especially those that are not tested or approved by the

Bluetooth SIG, may be incompatible with your headset.

•

Turning the headset on or off

To turn the headset on, slide the power button up. The Battery iconslide the power button up. The Battery icon. The Battery iconThe Battery icon

appears. Whenever you turn the headset on, it will be reset.

To turn the headset off, slide the power button down. The Batteryslide the power button down. The Battery. The BatteryThe Battery

icon disappears.

•

English

11

Pairing and connecting the headset

Pairing will create a unique and encrypted wireless link between

two Bluetooth-enabled devices, such as a Bluetooth phone and your

Bluetooth headset.

To use the headset with other Bluetooth devices, the devices must be

paired. When trying to pair the two devices, keep the headset and the

phone reasonably close together. After pairing, you can connect the two

devices.

Pairing and connecting the headset to a phone

1 Enter Pairing mode.

With the headset turned on, press and hold the talk button until

the Bluetooth icon appears.

When you turn on the headset for the rst time, it automatically

enters Pairing mode.

2 Activate the Bluetooth feature on your phone and search for the

headset (see your phone’s user manual).

3 Select the headset (WEP870) from the list of devices found by your

phone.

•

12

4 Enter the Bluetooth PIN (0000, 4 zeros) to pair and connect the

headset to your phone.

Your headset supports the Simple Pairing feature which allows the

headset to be paired with a phone without requesting a PIN. This feature

is available for phones that are compliant with Bluetooth version 2.1 or

higher.

Disconnecting the headset

To disconnect the headset from your phone,

Slide the power button down to turn off the headset.

Use the Bluetooth menu on your phone.

Reconnecting the headset

When the headset is paired with a phone, it will attempt to automatically

reconnect each time you turn the power on.

If the headset does not automatically attempt to reconnect,

Press the talk button.

Use the Bluetooth menu on your phone.

•

English

13

Using call functions

Making a call

Redialling the last number

Press the talk button to redial the last number.

For some phones, pressing the talk button opens the call log list. Press

the talk button again to dial the selected number.

Dialling a number by voice

Press and hold the talk button, and then say a name to dial a number by

voice.

Answering a call

When you hear incoming call tones, press the talk button to answer a

call.

Ending a call

Press the talk button to end a call.

14

Rejecting a call

When a call comes in, press and hold the talk button to reject a call.

Using options during a call

You can use the following functions to control your call:

Adjusting the volume

Press the volume button up or down to adjust the volume.

Muting the microphone

Press and hold the Volume up or down button to turn the microphone

off so that the person with whom you are speaking cannot hear you.

When the microphone is turned off, the headset beeps at regular

intervals. Press and hold the Volume up or down button again to turn

the microphone back on.

Transferring a call from the phone to the headset

Press the talk button to transfer a call from the phone to the headset.

Placing a call on hold

Press and hold the talk button to place the current call on hold.

English

15

Answering a second call

When you hear call waiting tones, press the talk button to end the rst

call and answer a second call.

When you hear waiting tones, press and hold the talk button to place

the rst call on hold and answer a second call.

To switch between the current call and a held call, press and hold the

talk button.

Connecting the headset with a music device

You can separately pair and connect your headset with the phone and a

Bluetooth device that plays music les.

1 Pair the headset with a phone. See page 11.

2 If successful, press and hold the talk button. The Bluetooth icon

starts blinking.

3 Search for, pair, and connect with the music device you want

according to the device’s user guide.

4 Press the talk button to connect with the paired phone.

16

5 When the phone and the device are successfully connected with the

headset, you can make or answer a call while you are listening to

music.

You can start, pause, and resume playback, and scan backward and

forward in a music le only in the connected music device.

If the headset loses the connection to the paired music device, press and

hold the Volume up button to reconnect.

•

Answering a call while listening to music

When a call comes in while listening to music, your headset will alert you

so that you can answer the call.

1 When the headset sounds incoming call tones, press the talk button.

The music stops and you are connected with the caller.

2 When you have nished the conversation, press the Talk button to

end the call. Your phone automatically resumes playback after the

call.

English

17

Appendix

Frequently asked questions

Will my headset

work with laptops,

PCs, and PDAs?

Your headset will work with devices that

support your headset’s Bluetooth version and

proles. For specications, see page 22.

Will anything cause

interference with

my conversation

when I am using

my headset?

Appliances such as cordless phones and

wireless networking equipment may cause

interference with your conversation, usually

adding a crackling noise. To reduce any

interference, keep the headset away from

other devices that use or produce radio waves.

Will my headset

interfere with my

car’s electronics,

radio, or

computer?

Your headset produces signicantly less power

than a typical mobile phone. It also only

emits signals that are in compliance with the

international Bluetooth standard. Therefore,

you should not expect any interference

with standard consumer-grade electronics

equipment.

La page charge ...

Samsung WEP870 Manuel utilisateur

Samsung WEP870 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents