Uniden D6860D2 Le manuel du propriétaire

Marque: Uniden

Modèle: D6860D2

Catégorie: Enregistreurs vidéo numériques (DVR)

Taper: Le manuel du propriétaire

Irving, Texas Printed in China

SET UP GUIDE

Wired Video Security DVR System

This Set Up Guide applies to the following models:

B6440D

G6440D

G6840D1

G6860D2

G6880D2

Uniden surveillance products are not manufactured and/or sold with the intent to be used for

illegal purposes. Uniden expects consumer’s use of these products to be in compliance with all

local, state and federal law. For further information on video surveillance and audio recording legal

requirements, please consult your local, state and federal law.

All rights allowed by law are hereby reserved.

Information in this document is subject to change without notice.

ABOUT YOUR VIDEO SECURITY SYSTEM

Thank you for purchasing Uniden's Guardian Video Security DVR. This state of the

art surveillance system provides high quality synchronous audio and video. TCP/IP

network technology lets you monitor and operate your system remotely.

This Setup Guide provides basic setup and operation information so you can quickly

get your system up and running. It also sets up remote viewing access. Download

the Owner’s Manual from www.uniden.com for detailed information about system

operation.

INCLUDED IN THE BOX:

• Cameras (4, 6, or 8) • Receiver (1) • 12V 2A Power Adapter

(2)

• 4-or8-WaySplier

Cable

• 60’ExtenonCable(4,

6, or 8)

• USB Mouse

• Ethernet Cable • HDMI Cable • CameraMounngKit

If any items are missing or damaged, visit www.uniden.com for assistance

SETTING UP YOUR SYSTEM - BASIC

Images in these installation procedures show the front and back panels of the

G6840D1. Other models' back panels will be different, but similar.

Basic setup connects the DVR to all peripheral equipment (cameras, mouse,

monitor, etc) and power. Once connected, your system is ready for use through the

DVR’s menu system.

You can set up your system in 2 stages - installing your system hardware and then

sengupbasicconguraon.Eachstagehasseparatesteps.

STAGE 1 - Install System Hardware

• Connect DVR to Power

• Connect Mouse to DVR

• Connect DVR to Monitor

• Connect Ethernet Cable

• Connect Cameras to DVR and Power

• Install Cameras

STAGE 2 - Basic System Configuration

• Complete Wizard and Log In

• Set Password

• Set Screen Resolution

• Set Motion Sensitivity

CONNECT DVR TO POWER

1. Connect the DVR to 12V power using the 12V

2A power adapter (supplied).

2. Connect the power adapter to the surge protector plugged into 120V indoor

power.

CONNECT MOUSE TO DVR

Connect the mouse to the DVR at the labeled USB

port on the back of the DVR.

CONNECT DVR TO MONITOR

There are three different ways to connect the DVR and monitor, depending on

what type of monitor port connection is available.

Monitor with HDMI Port

1. Connect DVR and monitor

using HDMI Cable

(included).

HDMI cable to DVR

HDMI cable to Monitor

(example)

2. Connect monitor to surge protector plugged into 120V indoor power.

3. TheDVRbeepsasitpowersup.AertheUNIDENwelcomescreendisplays,

the Wizard screen displays.

4. Select Exit for now; we will return to the Wizard later in the setup process.

Monitor with VGA Port

1. Connect DVR and monitor

using VGA Cable (not

included).

VGA cable to DVR

VGA cable to

Monitor (example)

2. Connect monitor to surge protector plugged into 120V indoor power.

3. TheDVRbeepsasitpowersup.AertheUNIDENwelcomescreendisplays,

the Wizard screen displays.

4. Select Exit for now; we will return to the Wizard later in the setup process.

TV with BNC Port (VIDEO IN)

1. Connect DVR and TV using

BNC-RCACable(notincluded).

BNC-RCAcabletoDVR

BNC-RCAcableto

Monitor (example)

2. Connect TV to surge protector plugged into 120V indoor power.

3. TheDVRbeepsasitpowersup.AertheUNIDENwelcomescreendisplays,

the Wizard screen displays.

4. Select Exit for now; we will return to the Wizard later in the setup process.

CONNECT ETHERNET CABLE

Connect one end of the Ethernet cable to the RJ45 jack on the DVR and the other to

yourethernetconnecondevice(router,cablebox,etc).

CONNECT CAMERAS TO DVR AND POWER

Eachcameraconnectstooneendofthe60footextenoncable.Theotherendof

thecableconnectstothereceiverandtopower.Theendsoftheextenoncable

are marked for Camera or DVR side

1. Connect camera cable's blue end

(male)tothebluecamera-sideBNCend

(female) of the extension cable.

Male Female

Female Male

2. Connect the camera cable’s RED power

connector (female) to the DVR extension

cable’s RED power connector (male).

3. Connect the extention cable's other

blueBNCend(female)toDVR'sVideoIn

connector (male).

The Video In ports on the back of the DVR

are numbered. Do not connect cameras to

ports that your system does not support. If

you have 1 - 4 cameras, use ports labeled

1 - 4, etc.

4. Connecttheextenoncable’sred

(female) power connector to one of the

powerspliercableends(male).

5. Repeat these steps to connect the other cameras to the DVR and to the split-

ter cable.

6. Connectthepowerspliercabletothe

power adaptor.

Female

Male

7. Plug power adaptor into the surge protector. Live video from the cameras

displays on the screen.

Some DVR systems have more than 4 cameras. DVR systems with 6 or 8 cameras

have an 8x splier.

INSTALL CAMERAS

Video surveillance laws vary from state to state. Check local regulations to be

sure you are operating in a legal manner.

Installaon Tips

• When selecting an outside location for your cameras, keep in mind that most

cameras are designed to operate between 14°F to 122°F (-10°C to 50°C) with a

relative humidity of up to 95%. Avoid installing cameras in direct sunlight, and

consider wind chill and other environmental factors, too.

• Mount the camera in an area that is visible, but out of reach. Route the wiring

so it does not interfere with power or telephone/cable lines and it should not

be where it could be easily cut. Create a plan for camera wire routing and for

camera angle.

• Adjust the camera angle so that it covers an area with high traffic as needed.

In “high-risk” locations, have more than one camera cover the same area. This

provides camera redundancy if a vandal attempts to damage a camera.

Male

Female

• If you position cameras indoors, avoid pointing the camera at a glass window

to see outside. This may result in a bright white ring in the night vision image

because the light from the night vision LEDs may reflect off the window glass.

Take the following placement suggestions under consideration:

• Cabling Distance From DVR to Camera. The video signal sent from the camera

to the DVR is reduced over distance. The maximum distance allowed is 330

feet (100 meters). A 60 foot cable is included. If you need a cable longer than

60 feet, then use an RG59 cable (with suitable connectors).

• Do not submerge any camera.

• Mounting. Ensure the camera is mounted on a stable surface which is capable

of supporting 5 times the weight of the camera.

• Avoid direct exposure to the weather. Cameras which are weatherproof may

be mounted outside, such as under an eave or other overhang; however, the

image will be affected by rain, etc., landing on the lens. Do not allow direct

sunlight to land on the lens.

1. With the DVR connected to the camera, hold it in the location where you

want it mounted. Check the display on the monitor to verify that the view

from that location is acceptable.

2. Mount the camera(s) to the desired surface using the parts in the supplied

mounting kit. If mounting on drywall, use the drywall anchors supplied in

the kit.

3. Adjust the camera stand to ensure that the camera has a satisfactory view

of the area you would like to monitor. The camera has several adjustment

points to provide maximum flexibility when setting the view angle. Use a

Philip's head screwdriver (not included), to make any adjustments.

BASIC CONFIGURATION

Basic configuration lets you use the DVR's internal menu system to access all DVR

features. The easiest way to get started is to go through the Wizard quick setup and

then fine tune specific areas (such as screen resolution, etc.).

Some fields may require keyboard input. Select the field and a pop-up keyboard

displays. This keyboard supports alphanumeric and symbol keys. Shift once to

input a capital letter; shift again to return to lower case. Click

ESC

to close the

keyboard.

POWER ON AND ACCESS WIZARD

1. If your DVR is already connected to power, disconnect it. Reconnect the DVR

to the power supply; the DVR powers up and the POWER and HDD LEDs on

the front light up.

2. AertheDVRpowersupandthe

UNIDENwelcomescreendisplays,the

rstofthreeWizardscreensdisplays.Fill

inthedateandmeinformaon.The

mostcommonlyusedmezonesforthis

system are:

• GMT-05:00 - Eastern Standard (Default)

• GMT-06:00 - Central Standard

• GMT-07:00 - Mountain Standard

• GMT-08:00 - Pacific Standard

• GMT-09:00 - Yukon Standard

• GMT-10:00 - Alaska-Hawaii Standard

3. Select Next.

4. The second Wizard screen sets up

DVR monitoring through the internet.

SettheHpPortto8091andthe

server port to 5000. Click Obtain an IP

address automacally to get network

informaonorllintheeldsmanually.

Refer to the Owner’s Manual at www.

uniden.com for internet access details.

Click Next.

8091

5. The last Wizard screen displays storage

status.Reviewtheinformaonandthen

click FinishtosavetheWizardseng.

Live video displays.

You need to log into the system to continue setting it up.

1. Right-click on any Live View screen; a

menu shortcut screen displays.

2. Select Main Menu; the Login dialogue

box displays. The user name, admin, is

already entered. There is no password

required so select Login (set a password

aeryoulogin).

NOTE: Uniden strongly recommends that

you set a password for your system.

3. The Main Menu screen displays.

SET PASSWORD

1. From the Main Menu screen, select

Setup>Users. The User Management

screen displays.

2. Select Change Password. (At this point,

there are no other users added to the

system.) In the Change Password screen,

enteranewpasswordandconrmit

usingthepopupkeyboard,selecng

Enter each time. Select OK to save the

new password.

3. The User Management screen displays

again.

4. Click EXIT to return to the Setup screen.

SET MOTION SENSITIVITY

You can set how sensitive the camera should be for movement to trigger recording.

You can also block off (mask) certain areas of the camera's viewing window so

normal movement in those areas (trees, wind chimes, etc.) won't trigger recording.

1. From the menu shortcut screen, select

Main Menu/Setup/Alarm/Moon. The

Moon screen displays.

2. Seteachcamera’smoondeteconspecicaons.

• Select Camera. Select the channel you want to record when motion is

detected.

• Select Holding Time. Set how long the camera continues recording after

motion is no longer detected.

• Select Trigger. Other channels record when one of the cameras detects

motion. The Trigger field sets how that camera notifies that it is recording

(buzzer, email notification, etc).

3. The last field, Area, masks parts of the

viewing area from being triggered by

normal motion. Select Setting, and a grid

displays over the camers's live view. Use

the left mouse to select a grid to block

from view. Left-click and drag to select

multiple boxes. Left-click those boxes

again to de-select them. Mask off flags,

trees, or other objects that move in the

wind to avoid false alerts.

4. Right-click to display the control bar. Click

STAR

to make the whole viewing

range a sensitivity area. Click the

TRASH CAN

to remove sensitivity areas.

Click

SD CARD

to save the settings and click to exit.

5. From Live view, test motion detection by moving something or having

someone walk through the camera's view. If the DVR detects movement

within the active grid area, a red person icon displays.

NOTE: Refer to the detailed Owner's Manual for other ways to mask areas from

recording.

BASIC OPERATION

This section covers the most common operations related to recording and viewing

video files. See the detailed Owner's Manual on www.uniden.com for more

information on all operations and specifications for this system.

MANUAL RECORDING

1. From the menu shortcut list, select

Start Record. A green square displays

in the lower left corner of the live view,

indicating that recording has begun.

CAMERA01

09/15/2016 02:30:35 PM

2. To stop recording, select Stop Record from the menu shortcut list (Start

Record changes to Stop Record

when recording starts

). The green square

goes away.

NOTE: Refer to the detailed Owner's Manual for other ways to manually start

recording.

SET RECORDING SCHEDULE

To set up a recording schedule, you have to enable recording and audio on the

cameras you want to record (Step 1). After that, set up a time schedule for each

channel to automatically begin recording (Step 2).

1. Go to Main Menu>Setup>Record, Record

tab. Check the Record and Audio boxes

for each camera you want to be able to

record.

2. Go to Main Menu>Setup>Schedule,

Schedule tab. Select a channel, then

select the blocks of time you want the

camera to record. Select Apply to save

the schedule for that channel.

3. Repeat these steps for each channel or select Apply Sengs To and enter the

channel number to use those same settings.

VIEW RECORDED FILES

1. Go to Main Menu>Search. The Search

screen displays.

2. Set up your search parameters:

• Select a date to search from the right-hand calendar.

• Select the cameras to search.

• Select single channel ( )ormulplechannels( ) to search

• Enterthemeframetostartsearching.

3. Select to play back records for that time. The monitor plays back the files

recorded for the requested channel from the requested time.

4. A playback control bar displays across

the bottom of the recorded file playback

screen.

Icon Function Icon Function

Play/Pause Previous

frame

Nextframe Fast forward

Reverse Single-screen

display

Multi-screen

display

The following icons display while the record

is playing:

Play previous

file

Play next file

(1) Playback Control

(2) Channel Audio Switch

(not available on all models)

(3) Function Hidden Key

(4) Operate Playback

09/07/2016 05:30:00

Refer to the online Detailed Owner's Manual at www.uniden.com for more

system operation details.

REMOTE ACCESS

SMARTPHONE

View live and recorded video remotely using an iOS or Android device and Uniden’s

ProHD App.

iOS screens are similar to the Android screens and are not shown.

1. From the Apple App Store, Google Play, or the Amazon App

store, download the Uniden ProHD app.

2. Open the app. The

Create Account

screen displays.

3. Complete the fields and then select

. The

Device List

screen displays.

4. Select the + icon at the top right corner to add your DVR

system to the app. The

Add Device

screen displays.

5. NameyourDVRsystem.SelecttheQRcodeiconandscan

theQRcodelabelontopoftheDVRboxortheapplicable

QRcodefrom

Main Menu/Information/System

screen on the

monitor. This will add the DVR Device ID code to the app.

Select OK.

6. The

Device List

displays again, with your system now listed.

Select your system and live video displays on your device.

Go to www.uniden.com to download the complete User’s Manual for detailed

information.

FCC PART 15/IC COMPLIANCE

FCC PART 15 COMPLIANCE

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void your authority

to operate the equipment.

Avis de conformité à la FCC : Ce dispositif a été testé et s’avère conforme à l’article 15 des règlements de la

Commission fédérale des communications (FCC). Ce dispositif est soumis aux conditions suivantes: 1) Ce dispositif

ne doit pas causer d’interférences nuisibles et; 2) Il doit pouvoir supporter les parasites qu’il reçoit, incluant les

parasites pouvant nuire à son fonctionnement.

Tout changement ou modification non approuvé expressément par la partie responsable pourrait annuler le droit à

l’utilisateur de faire fonctionner cet équipement.

IC COMPLIANCE

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two

conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

Changes or modifications not expressly approved by the party responsible for compliance could void your authority

to operate the equipment.

Cet appareil est conforme aux normes RSS exemptes de licences d’Industrie Canada. Son fonctionnement est

soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d’interférences nuisibles et (2), il doit

pouvoir accepter les interférences, incluant celles pouvant nuire à son fonctionnement normal.

Tout changement ou modification non approuvé expressément par la partie responsable pourrait annuler le droit à

l’utilisateur de faire fonctionner cet équipement.

ONE YEAR LIMITED WARRANTY

WARRANTOR: UNIDEN AMERICA CORPORATION (UNIDEN)

ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be

free from defects in materials and craftsmanship with only the limitations or exclusions set out below.

WARRANTY DURATION: This warranty to the original user shall terminate and be of no further effect 12 months

after the date of original retail sale. The warranty is invalid if the Product is

(A) damaged or not maintained as reasonable or necessary,

(B) modified, altered, or used as part of any conversion kits, subassemblies, or any configurations not sold by

Uniden,

(D) serviced or repaired by someone other than an authorized Uniden service center for a defect or malfunction

covered by this warranty,

(E) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or

(F) installed or programmed by anyone other than as detailed by the Operating Guide for this product.

STATEMENTOFREMEDY:Intheeventthattheproductdoesnotconformtothiswarrantyatanytimewhilethis

warranty is in effect, warrantor will repair the defect and return it to you without charge for parts, service, or

any other cost (except shipping and handling) incurred by warrantor or its representatives in connection with the

performanceofthiswarranty.THELIMITEDWARRANTYSETFORTHABOVEISTHESOLEANDENTIREWARRANTY

PERTAININGTOTHEPRODUCTANDISINLIEUOFANDEXCLUDESALLOTHERWARRANTIESOFANYNATURE

WHATSOEVER,WHETHEREXPRESS,IMPLIEDORARISINGBYOPERATIONOFLAW,INCLUDING,BUTNOTLIMITEDTO

ANYIMPLIEDWARRANTIESOFMERCHANTABILITYORFITNESSFORAPARTICULARPURPOSE.THISWARRANTYDOES

NOTCOVERORPROVIDEFORTHEREIMBURSEMENTORPAYMENTOFINCIDENTALORCONSEQUENTIALDAMAGES.

Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation

or exclusion might not apply to you.

LEGAL REMEDIES: This warranty gives you specific legal rights, and you might also have other rights which vary from

state to state. This warranty is void outside the United States of America.

PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in this Operating

Guide you are certain that the Product is defective, pack the Product carefully (preferably in its original packaging).

Include evidence of original purchase and a note describing the defect that has caused you to return it. The Product

should be shipped freight prepaid, by traceable means, or delivered, to warrantor at:

Uniden America Service

C/O Saddle Creek

743 Henrietta Creek Rd., Suite 100

Roanoke, TX 76262

Uniden D6860D2 Le manuel du propriétaire

Marque: Uniden

Modèle: D6860D2

Catégorie: Enregistreurs vidéo numériques (DVR)

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Uniden D6860D2 Owner's manual

Uniden D6860D2 Le manuel du propriétaire

Uniden D6860D2 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents