EN
3- Control panel
11
3.5.4-Function button“6+6 kg“
Press this button (Fig. 3-5.4) in order to activate /de-
activate the drying function. This allows washing and
drying of maximum 6 kg laundry without interruption.
By pressing the button sequentially, drying time can be
set( 30, 60, or 150 minutes for Model HWD100 ; 20,
If the display
shows 0 or
no value, the drying function is deactivated.
In combination with programme DRY this function sets
the drying time.
Drying function is not applicable to all programmes
(see PROGRAMMES).
6+6kg
3-5.4
Note: 6+6 kg
Do not overload. Combination of washing and drying cycle only allows a maximum loading
of 6 kg (5kg for HWD80-BP14636N).
3.5.1-Function button ” Temp.“
Press this button (Fig. 3-5.1) to change the washing
temperature of the programme. If no value is illumi-
nated the temperature will be 0 °C.
In conjunction with the “Steam” button, the child lock
3.5.2-Function button “Speed”
Press this button (Fig. 3-5.2) to change or deselect
the spin of the programme. If no value is illuminated
the laundry will not spun.
Temp
Schleudern Intensiv Zeitvorwahl
5+5 kg
Kurz
Temp
Speed
3-5.1 3-5.2
3.5.3-Function button “Steam“
Speed Steam
5+5 kg
3-5.3
90,120
30,60, 90 or 120 minutes for Model HWD90).
Press this button (Fig. 3-5.3) to activate the steam fu-
nction.When this function is activated the default tem-
perature is the maximum temperature of the progra-
mme selected.This function can be activated only with
the following programmes: Cotton, Synthetic, Mix, Baby
Care, Hygiene.When the function is activated the led
above the button will light up. Pushing again this button
the function can be deactivated and the led above the
button will turn off.When the function is activated the
temperature of the programme cannot be changed.
If “Temp.” is activated, “Steam” function cannot be sel-
ected. Users can only activate “Steam” function before
starting programmes. You cannot activate “Steam”
function while the appliance is already executing a prog-
ramme.