Animo
2
04/02FC GL Timer
Deze gebruiksaanwijzing is bestemd voor de gebruiker van de Tempomatic Timer.
Lees deze gebruiksaanwijzing aandachtig, voor een goed en veilig gebruik van de Timer.
1. Operation
The 99 hours timer is a timer that counts back, which can be set on a
maximum of 99 hours. This way it is possible to for instance set the timer
of a coffee machine on Friday for use on Monday. As soon as the timer
reaches the 0, the coffee maker is switched on and the brewing process
will start. When the timer is turned on, three zeros and two flashing dots
will appear in the display. When the time is not set within 1 minute (see 2a
and 2b), the time will automatically be activated and in the display appears
0:01. In this case the time should be set according to point 2d.
2. Setting the time
a. Press the push button CLOCK once (the display will start to flicker).
b. Use the buttons UP and DOWN to set the actual time. With every push on the button the time jumps
one minute. When the button is pressed and held, then the time will jump in steps of 10 minutes.
c. When the correct time has been reached and the buttons UP and DOWN are no longer used, the
programmed time starts to flicker. With the push button CLOCK the time is activated and both dots flicker
simultaneously (the time will become active automatically when the push button CLOCK is not activated
within one minute).
d. When at the activated time the push button CLOCK is pressed, the display begins to flicker and the time can
be adapted as described above.
3. Setting the start up time
Set the hours and minutes that are required between the moment of setting the 99 hours timer and the moment
of starting the coffee machine. The setting of the start up time takes place within the actual time.
a. Use the buttons UP and DOWN to set the required start up time (see 2b). When the start up time is
being set for the first time, the beginning time is 0:00. After that the beginning time will be equal to the
last set start up time.
b. Activate the set start up time by pushing the START/STOP button or wait 5 seconds. Both dots flicker
in turn now and the set time declines.
c. A start up time that has been set at an earlier time can be reactivated by pressing the push buttons UP
or DOWN shortly (the time appears in the display) and then pushing the START/STOP button.
d. Five seconds before the ending time a signal will sound 5 times. Afterwards the timer will switch on and
a signal will sound two more times. The coffee machine has now been activated.
e. An activated start up time can be reset by pushing the START/STOP button which means that the start
up time will start again from the set time. By holding the START/STOP button for two seconds, the start
up time will be ignored and the timer will be switched on; a short double signal will sound.
4. General
After setting the start up time, set manually or not, the actual time will appear automatically in the display.
During the time the start up time is active, display of the actual time is not possible.