A986 OWNER’S MANUAL CONTENTS

1. INTRODUCTION ................................................................................ 2

2. SAFETY PRECAUTIONS .................................................................. 3

3. LIST OF PARTS ................................................................................. 4

4. ASSEMBLE THE PRODUCT ............................................................. 6

STEP 1 Install the Seat Base ................................................................. 6

STEP 2 Install the Central Support ....................................................... 7

STEP 3 Install the Arm Assemblies ....................................................... 8

STEP 4 Install the Cushion Adjustment Assembly ................................ 9

MAINTENANCE Task List .................................................................... 15

MAINTENANCE One-Year Maintenance Log ....................................... 16

7. CONSIGNES DE SÉCURITÉ IMPORTANTES ................................. 17

2

1. INTRODUCTION

Congratulations on the purchase of a high quality SportsArt product, the A986 lat

pulldown machine. Constructed of high quality materials and designed for years of

reliable performance, this product was made for full commercial use.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of

this product will help ensure that exercisers obtain their tness goals safely and

3

sure the product is installed and operated as instructed in this manual.

• Assemble and operate the product on a solid, level surface. Do not use

outdoors or near water, including pools and saunas.

• Check the product before every use. Make sure all parts are assem-

bled, and all fasteners are tightened. Do not use the product if it is disas-

sembled in any way.

• Wear proper workout clothing. Do not wear loose clothing. Do not wear

shoes with leather soles or high heels. Tie all long hair back. Do not go

barefoot on this product.

• Keep away from moving parts. Moving parts may or may not stop imme-

technician for repairs.

• Do not use accessories that are not specically recommended by the

manufacturer. Such parts might cause injuries or cause the unit to fail.

• This product is not intended for use by persons (including children) with

reduced physical, sensory, or mental capabilities, or by people who are

otherwise decient in product knowlege or experience. If such people use

this product, they should be given training and be supervised at all times

by someone responsible for their safety.

• Children should be supervised to ensure that they do not play on or

near the product.

4

3. LIST OF PARTS

Assembly Parts

No. Name Qty. No. Name Qty.

A1 Main frame 1 A6 Seat bottom cushion 1

A2 Left arm assembly 1 A7 Seat base 1

A3 Right arm assembly 1 A8 Connector 3

A4 Central support 1 A9 Weight plate peg 6

A5

Cushion adjustment

assembly

1

5

No. Name Qty. Specication Notes

6

4. ASSEMBLE THE PRODUCT

Follow instructions below to install the seat base. First, remove the connec-

tor plate (A8) from the main frame (A1). Align the seat base (A7) with the hori-

zontal tube on the front of the main frame (A1). Insert the protruding screws

on the connector plate (A8) through the holes in the main frame. Insert the

connector into place. Then secure this assembly with nuts (29) as shown.

7

STEP 2 Install the Central Support

Please follow instructions below to secure the central support into place.

First, remove the connector plate (A8) from the mainframe (A1) and the seat

8

the right arm assembly (A3).

9

(b) Insert the bushing from the screw assembly (31) into the central support

(A4). Then insert the pin into place. Align the cushion support assembly (A5)

with the holes in the central support and secure it into place with screws (31).

16

17

18

sion, le mot «vis» est utilisé dans certains cas où des rondelles, des vis et autres

matériels sont associés.