A988 OWNER’S MANUAL CONTENTS

1. INTRODUCTION ................................................................................ 2

2. SAFETY PRECAUTIONS .................................................................. 3

3. LIST OF PARTS ................................................................................. 4

4. ASSEMBLE THE PRODUCT ............................................................. 6

STEP 1 Install the Upright Frame .......................................................... 6

STEP 2 Install the Arm Assemblies ....................................................... 7

STEP 3 Install the Rotating Handles ..................................................... 8

STEP 4 Install the Cushions ................................................................. 9

MAINTENANCE Task List .................................................................... 15

MAINTENANCE One-Year Maintenance Log ....................................... 16

7. CONSIGNES DE SÉCURITÉ IMPORTANTES ................................. 17

2

1. INTRODUCTION

Congratulations on the purchase of a high quality SportsArt product, the A988 hack

squat machine. Constructed of high quality materials and designed for years of

reliable performance, this product was made for full commercial use.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of

this product will help ensure that exercisers obtain their tness goals safely and

3

sure the product is installed and operated as instructed in this manual.

• Assemble and operate the product on a solid, level surface. Do not use

outdoors or near water, including pools and saunas.

• Check the product before every use. Make sure all parts are assem-

bled, and all fasteners are tightened. Do not use the product if it is disas-

sembled in any way.

• Wear proper workout clothing. Do not wear loose clothing. Do not wear

shoes with leather soles or high heels. Tie all long hair back. Do not go

barefoot on this product.

• Keep away from moving parts. Moving parts may or may not stop imme-

technician for repairs.

• Do not use accessories that are not specically recommended by the

manufacturer. Such parts might cause injuries or cause the unit to fail.

• This product is not intended for use by persons (including children) with

reduced physical, sensory, or mental capabilities, or by people who are

otherwise decient in product knowledge or experience. If such people use

this product, they should be given training and be supervised at all times

by someone responsible for their safety.

• Children should be supervised to ensure that they do not play on or

near the product.

4

3. LIST OF PARTS

Assembly Parts

No. Name Qty. No. Name Qty.

A1 Main frame 1 A6 Left arm assembly 1

A2 Upright 1 A7 Connector 1

A3 Weight plate peg 2 A8 Seat cushion 1

A4 Chest cushion 1 A9 Rotating handle 2

A5 Right arm assembly 1

5

Components on the Product

No. Name Specication Notes

28

Washer D16*d10.2*t1.0

Spring washer M10

Washer D16*d10.2*t1.0

Bushing D16*t2*L39

Washer D35*d12*Lt1.0

Hex nut M10

30

Round head inner hex screw M8*P1.25*L20

Spring washer M8

Flat washer D26*d8.3*t3

Bushing

Axle D25*L104

Spring washer M8

Bushing D26.5*d16*L20.5

Axle D16*L59.6

Components in the Hardware Kit

No. Name Qty. Specication Notes

13

Bevelled head inner hex screw 8 M8*P1.25*L20

Spring washer 8 M8

Hex lock nut 8 M8

14

Inner hex screw 4 M6*L10

6

4. ASSEMBLE THE PRODUCT

Follow instructions below to assemble this product. Note that in this manual

the words “left” and “right” are used to refer to the product and its parts. As

such, these designations correspond to the “left” and “right” sides of a person

in position to exercise on this product. Also, for brevity, the word “screws” is

used where screws, washers, and other hardware may be involved.

STEP 1 Install the Upright Frame

Follow instructions (a) through (b) to install the upright frame.

(a) First insert the bushing from screws (28)(29) onto the upright frame (A2)

as shown.

7

assemblies.

from the other side).

(b) Carefully hold either the left or right arm assembly (A5,A6) on the main

the same procedure to install the arm assembly on the opposite side.

8

STEP 3 Install the Rotating Handles

Please follow instructions (a) through (b) to install the rotating handles.

9

STEP 4 Install the Cushions

Please follow instructions (a) through (c) to install seat and chest cushions.

(a) Remove screws (31) and the metal plates AB from the chest cushion (A4)

16

17

18

ont au préalable été formées eu égard à l’utilisation de ce produit par une per-

sonne responsable de leur sécurité.

produit.

Si vous ressentez une douleur ou si vous avez une sensation anormale, AR-

RÊTEZ VOTRE ENTRAÎNEMENT et consultez immédiatement votre médecin.

Entraînez-vous à votre niveau d’exercice recommandé. NE PAS s’entraîner jusqu’à

• Avant de commencer un programme d’exercice, vous devriez consulter votre