SportsArt P721 Le manuel du propriétaire

P721 OWNER’S MANUAL CONTENTS

1. INTRODUCTION ................................................................................ 2

2. SAFETY PRECAUTIONS .................................................................. 3

3. LIST OF PARTS ................................................................................. 4

4. ASSEMBLE THE PRODUCT ............................................................. 9

STEP 1 Cover Support Plate and the Connector Installation ................ 9

STEP 2 Weight Stack Installation ......................................................... 14

STEP 3 Handles Installation ................................................................. 18

STEP 4 Cable Installation ..................................................................... 20

STEP 5 Chest Cushion Installation ........................................................ 22

STEP 6 Seat Bottom Installation ............................................................ 23

STEP 7 Apply the Weight Stack Sticker ................................................. 24

STEP 8 Front Cover and Rear Cover Installation .................................. 25

STEP 9 Top Covers Installation ............................................................. 26

STEP 10 Storage Tray Installation ......................................................... 27

STEP 11 Cable Adjustment .................................................................... 28

STEP 12 Stack Fork Inspections ........................................................... 29

5. OPERATION INSTRUCTION ............................................................ 30

6. MAINTENANCE ................................................................................ 31

MAINTENANCE Schedule .................................................................... 32

MAINTENANCE Task List .................................................................... 33

MAINTENANCE One-Year Maintenance Log ....................................... 34

7. CONSIGNES DE SÉCURITÉ IMPORTANTES ................................. 35

2

1. INTRODUCTION

Congratulations on the purchase of a high quality SportsArt product, the P721

Dependent Mid Row machine. Constructed of high quality materials and designed for

years of reliable performance, this product was made for full commercial use.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of

this product will help ensure that exercisers obtain their tness goals safely and

successfully.

3

2. SAFETY PRECAUTIONS

This product was designed and built for optimum safety. However certain precau-

tions apply during the use of this product. Please note the following safety precau-

tions:

• Please read the entire manual before assembly and operation. Make sure the

product is installed and operated as instructed in this manual.

• Assemble and operate the product on a solid, level surface. Do not use outdoors

or near water, including pools and saunas.

• Check the product before every use. Make sure all parts are assembled, and all

fasteners are tightened. Do not use the product if it is disassembled in any way.

• Wear proper workout clothing. Do not wear loose clothing. Do not wear shoes

with leather soles or high heels. Tie all long hair back. Do not go barefoot on this

product.

• Keep away from moving parts. Moving parts may or may not stop immediately if

an object becomes caught or impedes normal motion.

• Use this product only for its intended purpose as described in this manual.

• Be careful when mounting and dismounting the unit.

• Never operate this product if it has been damaged in any way. If it is not work-

ing properly, or has been dropped or damaged, contact a service technician for

repairs.

• Do not use accessories that are not specifically recommended by the manufac-

turer. Such parts might cause injuries or cause the unit to fail.

• This product is not intended for use by persons (including children) with reduced

physical, sensory, or mental capabilities, or by people who are otherwise defi-

cient in product knowledge or experience. If such people use this product, they

should be given training and be supervised at all times by someone responsible

for their safety.

• Children should be supervised to ensure that they do not play on or near the

product.

• The user weight limit for this product is 227 kg, 500 lb.

CAUTION: If you feel any pain or any abnormal sensations, STOP YOUR WORK-

OUT and consult your physician immediately. Work within your recommended ex-

ercise level. DO NOT work to exhaustion. Before beginning any exercise program,

you should consult with your doctor. It is recommended that you undergo a complete

physical examination.

*NOTE: Regarding the decaled resistance on the unit weight stack, the actual weight

being lifted is configured at a ratio of 1:1. Example: If the stack fork is engaged at

60KG (132LB) at the weight stack, the actual pulling weight is 60KG (132LB).

4

3. LIST OF PARTS

Box A

5

Box B

Box C

6

Box A - Main Frame Components

No. Name Qty. No. Name Qty.

A1

Weight stack top right

cover

1 A8 Stack rod 1

A2

Weight stack top left

cover

1 A9 Cover bracket 1

A3 Main frame 1 A10 Cover support plate A 2

A4 Cover support plate B-2 1 A14 Rear cover 1

A5 Cover support plate B-1 1 A15 Front cover 1

A6 Storage tray 1 A16 Bracket 2

A7 Stack fork 1 A17 Bracket 4

Box B - User Frame Components

No. Name Qty. No. Name Qty.

A21 Seat bottom 1 A25 Right handle 1

A22 Chest cushion 1 A26 Connector A 1

A23 Seat frame 1 A27 Connector B 1

A24 Left handle 1

Box C - Weight Plates Components

No. Name Qty. No. Name Qty.

A30 5kg/11lb weight plate 15 A32

Weight plate sticker

(65kg~100kg/143lb

~220lb)

1

A31

Weight plate sticker

(10kg~60kg/22lb

~132lb)

1

7

Components on the Product

No. Name Specication Notes

30

Hex head screw M10*P1.5*L130

Spring washer M10

Ø50 Connecting board 46.4*L150*t5.0

Washer D16*d10.2*t1.0

Nylon hex lock nut M10

31

Hex head screw M10*P1.5*L75

Spring washer M10

Connecting board C W60*L156*t5

Bushing D16*t2*L39

Washer D16*d10.2*t1.0

Nylon hex lock nut M10*P1.5*H6

32

Hex head screw M10*P1.5*L130

Spring washer M10

Ø50 Connecting board A W46.4*L120*t5.0

Washer D16*d10.2*t1.0

Nylon hex lock nut M10

33 Upper stack carriage set

34

Hex head screw M8*P1.25*L65

Flat washer D17*d8.3*t2

PU tube D12*d8*L51

Nylon hex lock nut M8

35 Guide rod

Components in the Hardware Kit

No. Name Qty. Specication Notes

10 Screw socket 8 SGN-07

11 Mushroom top inner hex screw 12 M6*P1.0*L12

12 Mushroom top Phillips screw 8 M5*L15

13 Mushroom top Phillips screw 10 M5*0.8*L8

14 Ronund head Phillips screw 6 M6*P1.0*L12

16

Round head inner hex screw 2 M6*P1.0*20

Bushing 2 D21.5*10.5

L-shaped Allen wrench 2 (M4)

L-shaped Allen wrench 1 (M5)

L-shaped Allen wrench 1 (M6)

Open end wrench 2 (13*17)

Phillips-head screw driver 1

8

Components on the Product

No. Name Specication Notes

36

Round head inner hex screw M8*P1.25*L18

Spring washer M8*t2.0

Flat washer D17*d8*t1.5

37

Mushroom top inner hex screw M8*P1.25*L15

Flat washer D26*d8.5*t2

38

Mushroom top inner hex screw M6*P1.0*L12

Spring washer M6

Flat washer D20*d6.3*t1.5

Axle D15*L26

39

Axle D10*L23

Washer D16*d10.2*t1.0

Flat washer D16*d6.3*t2

Nylon hex lock nut M6*P1.0*6

40

Mushroom top inner hex screw M8*P1.25*L25

Spring washer M8

41

Bevelled head inner hex screw M8*P1.25*L20

Nylon hex lock nut M8

42

Plastic round head inner hex

screw

M6*P1.0*20

Flat washer D20*d6.3*t1.5

43 Bevelled head Phillips screw M5*L8

9

4. ASSEMBLE THE PRODUCT

Follow instructions below to assemble this product. Note that in this manual

the words “left” and “right” are used to refer to the product and its parts. As

such, these designations correspond to the “left” and “right” sides of a person

in position to exercise on this product. Also, for brevity, the word “screws” or

“nuts” is used where washers and other hardware may be involved.

STEP 1 Cover Support Plate and the Connector Installation

10

*Loosen and remove the screws (30) (31) (32) and the connecting plates

from the components (A26) (A27) as shown.

11

Brackets and the cover support plates installation

(a). Insert the screw sockets (10) into place in the main frame (A3) as

shown, and then use the screws (11) (12) to secure the brackets (A16)

(A17) in place.

(Note: The bracket (A16) must be secured to the top of maim frame as

shown.)

12

(b). Use the screws (13) to secure the cover support plates (A10) to the

straight frame of the main frame (A3) and then secure the cover

support plates (A4) (A5) to the both side of the curved frame as shown.

(Note: The cover support plates must be secured outside of the bracket

(A16) (A17).)

13

Connector and the seat frame installation

(a). Use the connector A (A26) to connect the main frame (A3) to the seat

frame (A23) and then use the screws (30) to loosely secure these

pieces. Do not tighten screws yet.

(b). Use the connector B (A27) to connect the main frame (A3) to the seat

frame (A23) and then use the screws (31) (32) to secure these pieces.

Finally, tighten all screws.

14

STEP 2 Weight Stack Installation

15

(a). Hold the upper stack carriage set (33), and then cut the zip tie. Gently

lower the upper stack carriage set (33) into place as shown.

(b). Remove the screws (34). Set the guide rod (35) downward into place as

shown.

(c). Tilt the guide rod (35) backward and then lift the upper stack carriage

set (33) off the guide rods as shown. Carefully set the upper stack

carriage set (33) aside.

16

(d). Loosen and remove the screws (36) from the stack fork (A7) and insert

the weight stack rod (A8) into the central mounting position of the upper

stack carriage set (33). Use the screws (36) to secure the stack fork

(A7) into place of the upper stack carriage set (33) as shown.

(Note: Remove the stack fork first before assembling.)

(e). Insert and lower the (5 kg/11lb) weight plates (A30) into place on the

guide rods (35) one at a time. Once complete, slide down the upper

stack carriage set (33) on top of the weight stack.

(Note: The convex side of weight plate should face up and the stack

fork (A7) points toward the front.)

* If there is an optional (7.5kg/16.5lb) weight plate installed, insert the

optional weight plates first before the (5 kg/11lb) weight plates (A30).

17

(f). Tilt the guide rods (35) back into place and then lift them up to their

mounting position, and then secure the assembly with the screws (34).

18

STEP 3 Handles Installation

19

(a). Loosen and remove the screws (37) from the handles (A24) (A25)

as shown.

(b). Place the axles of the handles (A24) (A25) onto the main frame (A23)

and then scecure with the screws (37) as shown.

(b)

(a)

20

STEP 4 Cable Installation

(a). Insert the cable nut as indicated by the arrows onto the weight stack

rod (A8) at least 15-20mm deep as shown.

(b). Loosen and remove the screws (38), the axle (39) and the pulley from

the seat frame (A23) as shown.

La page est en cours de chargement...

SportsArt P721 Le manuel du propriétaire

SportsArt P721 Le manuel du propriétaire

dans d''autres langues

Documents connexes