SportsArt DF208 Le manuel du propriétaire

DF-208

Multi Press

Owner’s Manual

ISO 9001/14001 Certied GoSportsArt.com 2016.07

Sports Art Industrial Co., Ltd. (Headquarter)

#11, Gong Huan Road,

Tainan City, Taiwan

T: 886 6 3840888

F: 886 6 3840999

[email protected]

Sports Art America Inc.

19510 144th Ave. N.E., Suite A-1,

Woodinville, WA 98072

T: +1 425 4819479

F: +1 425 4888155

[email protected]

Sports Art Fitness UK Ltd.

Unit 2, 3 Charnwood Business Park,

North Road, Loughborough,

LE11 1LE, England

T: +44 1509 274440

[email protected]

Sports Art Europe, Middle East & Africa

Strada Cantonale 42, Ch-6534 San Vittore,

Switzerland

T: +41 91 8273908

F: +41 91 8273910

[email protected]

Sports Art China

Room 2202, BLDG. A, Huapu Garden,

Dongzhimen South Street, No. 9,

Dongcheng District Beijing, 100007 China

T: +86 10 84094122/84094123

F: +86 10 84094121

DF-208 OWNER’S MANUAL CONTENTS

1. INTRODUCTION ................................................................................ 2

2. SAFETY PRECAUTIONS .................................................................. 3

3. LIST OF PARTS ................................................................................. 4

4. ASSEMBLE THE PRODUCT ............................................................. 9

STEP 1 Connector Installation ............................................................... 9

STEP 2 Cover Support Plate Installation ............................................... 11

STEP 3 Weight Stack Installation .......................................................... 14

STEP 4 Apply the Weight Stack Sticker ................................................ 18

STEP 5 Press Handle Installation ......................................................... 19

STEP 6 Seat Frame Installation ............................................................ 20

STEP 7 Seat Back Installation .............................................................. 23

STEP 8 Seat Frame Leveling Test ........................................................ 24

STEP 9 Support Tube Stopper Adjustment ........................................... 25

STEP 10 Cable Installation ................................................................... 26

STEP 11 Cable Adjustment ................................................................... 30

STEP 12 Cable Adjustment if too Loose ............................................... 30

STEP 13 Covers Installation ................................................................. 31

STEP 14 Storage Tray Installation ........................................................ 34

STEP 15 Secure the Product ................................................................ 35

STEP 16 Stack Fork Inspections .......................................................... 36

5. OPERATION INSTRUCTION ........................................................... 37

OPERATION Operating the Product .................................................... 37

OPERATION Exercising Instructions ................................................... 40

OPERATION Safety Operating Area ................................................... 41

6. MAINTENANCE ................................................................................ 42

MAINTENANCE Safety Precautions .................................................... 42

MAINTENANCE Guide Rod Cleaning and Lubricating ........................ 43

MAINTENANCE Schedule .................................................................... 44

MAINTENANCE Task List .................................................................... 45

MAINTENANCE One-Year Maintenance Log ....................................... 46

7. CONSIGNES DE SÉCURITÉ IMPORTANTES ................................. 47

2

1. INTRODUCTION

Congratulations on the purchase of a high quality SportsArt product, the DF-208

Multi Press machine. Constructed of high quality materials and designed for years

of reliable performance, this product was made for full commercial use.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of

this product will help ensure that exercisers obtain their tness goals safely and

successfully.

3

2. SAFETY PRECAUTIONS

This product was designed and built for optimum safety. However certain precau-

tions apply during the use of this product. Please note the following safety precau-

tions:

• Please read the entire manual before assembly and operation. Make sure the

product is installed and operated as instructed in this manual.

• Assemble and operate the product on a solid, level surface. Do not use outdoors

or near water, including pools and saunas.

• Check the product before every use. Make sure all parts are assembled, and all

fasteners are tightened. Do not use the product if it is disassembled in any way.

• Wear proper workout clothing. Do not wear loose clothing. Do not wear shoes

with leather soles or high heels. Tie all long hair back. Do not go barefoot on this

product.

• Keep away from moving parts. Moving parts may or may not stop immediately if

an object becomes caught or impedes normal motion.

• Use this product only for its intended purpose as described in this manual.

• Be careful when mounting and dismounting the unit.

• Never operate this product if it has been damaged in any way. If it is not work-

ing properly, or has been dropped or damaged, contact a service technician for

repairs.

• Do not use accessories or parts that are not specifically recommended by the

manufacturer (SportsArt). Such parts might cause injuries or cause the unit to

fail and void the warranty. We will not be responsible for any safety issue that

arises due to the misuse of accessories or parts. At the same time, we will termi-

nate the warranty terms of this equipment.

• This product is not intended for use by persons (including children 12 or younger)

with reduced physical, sensory, or mental capabilities, or by people who are

otherwise deficient in product knowledge or experience. If such people use this

product, they should be given training and be supervised at all times by some-

one responsible for their safety.

• Children 12 or younger should be supervised to ensure that they do not play on

or near the product.

• The user weight limit for this product is 227 kg, 500 lb.

• Maintenance and repair must be performed by trained service personnel

only.

CAUTION: If you feel any pain or any abnormal sensations, STOP YOUR WORK-

OUT and consult your physician immediately. Work within your recommended ex-

ercise level. DO NOT work to exhaustion. Before beginning any exercise program,

you should consult with your doctor. It is recommended that you undergo a complete

physical examination.

*NOTE: Each machine provides a different resistance ratio of weight stack.

4

3. LIST OF PARTS

Box A

5

Box B

Box C

6

Box A - Main Frame Components

No. Name Qty. No. Name Qty.

A1

Weight stack top right

cover

1 A10 Cover support plate A 2

A2

Weight stack top left

cover

1 A14 Rear cover 1

A3 Main frame 1 A15 Front cover 1

A4 Cover support plate B-2 1 A16 Bracket 2

A5 Cover support plate B-1 1 A17 Bracket 4

A6 Storage tray 1 A18 Floor xing bracket 1

A7 Stack fork 1 A19 U bracket 1

A8 Weight stack rod 1 A20 Pulley 2

A9 Cover bracket 5

Box B - User Frame Components

No. Name Qty. No. Name Qty.

A25 Press handle 1 A28 Connector A 1

A26 Seat back 1 A29 Connector B 2

A27 Seat frame 1 A30 Secondary frame 1

Components in the Hardware Kit

No. Name Qty. Specication Notes

11

Hex head screw 6 M10*P1.5*L130

Spring washer 6 M10

Nylon hex lock nut 6 M10

Washer 12 D16*d10.2*t1.0

12 Mushroom top inner hex screw 12 M6*P1.0*L12

13 Mushroom top Phillips screw 8 M5*L15

14 Screw socket 8 SGN-07

Box C - Weight Plates Components

No. Name Qty. No. Name Qty.

A33 5kg/11lb weight plate 19 A34 Weight plate sticker 1

7

Components on the Product

No. Name Specication Notes

51

Hex head screw M10*P1.5*L75

Spring washer M10

Bushing ØD16*t2.0*L45.5

Washer D16*d10.2*t1.0

Nylon hex lock nut M10

52 Upper stack carriage set

53

Nylon hex lock nut M8

PU tube ØD12*d8*L51

Flat Washer D17*d8.3*t2

Hex head screw M8*P1.25*L65

54

Nylon hex lock nut M8

PU tube ØD12*d8*L82

Flat Washer D17*d8.3*t2

Hex head screw M8*P1.25*L65

55 Guide rod

56

Inner hex screw M8*P1.25*L18

Spring washer M8*t2.0

Flat Washer D17*d8*t1.5

57

Axle E ØD20*L197

Flat washer D26*d8.5*t2

Spring washer M8

Inner hex screw M8*P1.25*L20

58

Nylon hex lock nut M8

Flat washer D17*d8.3*t1

Axle ØD11.7*L61

Components in the Hardware Kit

No. Name Qty. Specication Notes

15 Mushroom top Phillips screw 10 M5*0.8*L8

16

Inner hex screw 2 M6*P1.0*L12

Bushing 2 D21.5*10.5

17 Front cover bracket 1

18 Phillips screw 6 M6*P1.0*L12

19

Flat washer 2 D27*d6.3*t3.0

Mushroom top inner hex screw 2 M5*L20

8

Components on the Product

No. Name Specication Notes

59

Washer Ø16*Ø10.2

Nylon hex lock nut M10

Connecting board

60

Flat washer Ø20*Ø 6.3

Inner hex screw M6*L30

Bushing

61

Flat washer Ø17*Ø8.3

Spring washer M8

Mushroom top inner hex screw M8*L25

62

Mushroom top inner hex screw M6*P1.0*L12

Spring washer M6

Flat washer D20*d6.3*t1.5

Axle ØD15*L26

63

64

Nylon hex lock nut M6*P1.0*6

Flat washer D20*d6.3*t1.5

Axle ØD8*L54.5

Bushing ØD12*d8*L7

65 Soft cap ØD14

66

Mushroom top Phillips screw M5*0.8*L15

Flat washer D13*d6*t1.0

67

Spring washer M6

Flat washer D20*d6.3*t1.5

Mushroom top inner hex screw M6*P1.0*L12

68 Inner hex screw M5*P0.8*L10

69 Set fork

70 Bolt assy. crossover

71 Cover

72

Flat washer D20*d6.3*t1.5

Spring washer M6

Mushroom top inner hex screw M6*P1.0*L12

73 Pulley cover

74 Pulley ØD126*20

75

Axle ØD15*L26

Flat washer D20*d6.3*t1.5

Spring washer M6

Mushroom top inner hex screw M6*P1.0*L12

9

4. ASSEMBLE THE PRODUCT

Follow instructions below to assemble this product. Note that in this manual

the words “left” and “right” are used to refer to the product and its parts. As

such, these designations correspond to the “left” and “right” sides of a person

in position to exercise on this product. Also, for brevity, the word “screws” or

“nuts” is used where washers and other hardware may be involved.

STEP 1 Connector Installation

10

STEP 1 Connector Installation (Cont.)

Before assembling, remove screws (51) from the main frame (A3) as

shown. Use connector A (A28) and connector B (A29) to connect the main

frame (A3) to the secondary frame (A30) and then use screws (11) (51)

loosely secure these pieces. Do not tighten screws yet.

Set the unit flat on the floor. First secure screws (51) on the main frame

(A3) and then secure screws (11) on the secondary frame (A30).

11

STEP 2 Cover Support Plate Installation

12

STEP 2 Cover Support Plate Installation (Continued)

(a) Insert the screw sockets (14) into place in the main frame (A3) as

shown, and then use screws (12) (13) to secure the brackets (A16) (A17)

in place.

(Note: The bracket (A16) must be secured to the top of main frame as

shown.)

(Note: Remove the pulley before securing the bracket (A17). Once

completed, install the pulley back into place.)

(a)

13

STEP 2 Cover Support Plate Installation (Continued)

(b) Use screws (15) to secure the cover support plates (A10) to the straight

frame of the main frame (A3) and then secure the cover support plates

(A4) (A5) on both sides of the curved frame as shown.

(Note: The cover support plates must be secured outside of the bracket

(A16) (A17).)

(b)

14

STEP 3 Weight Stack Installation

15

STEP 3 Weight Stack Installation (Continued)

Follow instructions (a) through (g) to install the weight stack.

(a) Hold the upper stack carriage set (52), and then cut the zip tie. Gently

lower the upper stack carriage set (52) into place as shown.

(b) Remove screws (53) (54). Set the guide rod (55) downward into place

as shown.

(c) Tilt the guide rod (55) backward and then lift the upper stack carriage

set (52) off the guide rods as shown. Carefully set the upper stack

carriage set (52) aside.

(b)

(c)

(a)

16

STEP 3 Weight Stack Installation (Continued)

(d) Remove screws (56) from the stack fork (A7) and insert the weight stack

rod (A8) into the central mounting position of the upper stack carriage

set (52). Use screws (56) to secure the stack fork (A7) into place of the

upper stack carriage set (52) as shown.

(Note: Remove the stack fork first before assembling.)

(e) Remove screws (68) from the set fork (69) to remove the bolt assy.

crossover (70). Pull the cable from the stack fork (A7) to thread through

the bolt assy. crossover (70) as shown. Secure the bolt assy. crossover

(70) back into place of the set fork (69) with screws (68) as shown.

(d)

(e)

17

STEP 3 Weight Stack Installation (Continued)

(f) Insert and lower the (5 kg/11lb) weight plate (A33) into place on the

guide rods (55) one at a time. Once complete, slide down the upper

stack carriage set (52) on top of the weight stack.

(Note: The convex side of weight plate should face up and the stack fork

(A7) points toward the front.)

*If there is an optional (7.5kg/16.5lb) weight plate installed, insert the

optional weight plates before the (5 kg/11lb) weight plates (A30).

(g) Tilt the guide rods (55) back into place and then lift them up to their

mounting position, and then secure the assembly with screws (53) (54).

(g)

(f)

18

STEP 4 Apply the Weight Stack Sticker

Note: Before applying weight plate stickers, please wipe the area clean, and

clean your hands before proceeding to the next step.

(a) Align and tape the cardboard to the upper left corner of the weight plate

(A30).

(b) Peel off the top half of the weight plate sticker (A31) backing. Leave the

clear outside margin in place on the sticker. Don’t peel off the margin.

(c) Press the numbered part of the weight plate sticker (A31) in place while

you peel off the clear margin of the sticker.

(d) Peel off the clear margin of the sticker.

(e) Follow steps (b) ~ (d) to apply another weight plate sticker to the lower

part of the weight stack. When the stickers are in place, peel off the

cardboard. Press the sticker in place to ensure good contact on the

weight plate.

*If there are additional optional weight plates, use the optional weight plate

stickers.

(b)

(a)

(c)

(d)

(e)

19

STEP 5 Press Handle Installation

(a) First, remove the axle and screws (58) (57) from the press handle (A25)

and the secondary frame (A30). Carefully set each piece aside.

(b) Attach the press handle (A25) to the secondary frame (A30) via the axle

and then loosely secure these pieces with screws (57). Do not tighten

screws yet. And then secure the axle with screws (58). Finally, fully

secure all screws (57) (58) as shown.

(a)

(b)

La page est en cours de chargement...

SportsArt DF208 Le manuel du propriétaire

SportsArt DF208 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents