SportsArt P757 Le manuel du propriétaire

1. INTRODUCTION..................................................................................................

2. IMPORTANT SAFETY PRECAUTIONS...............................................................

3. LIST OF PARTS...................................................................................................

4. ASSEMBLING THE PRODUCT

STEP 1 Cover Support Plate and the Connector Installation.............................

STEP 2 Weight Stack Installation.......................................................................

STEP 3 CAM Installation....................................................................................

STEP 4 Cable Installation..................................................................................

STEP 5 Handle Installation.................................................................................

STEP 6 Cylindrical Cushion Arm Installation......................................................

STEP 7 Seat Bottom and Seat Back Installation................................................

STEP 8 Apply the Weight Stack Sticker..............................................................

STEP 9 Front Cover and Rear Cover Installation...............................................

STEP 10 Top Covers Installation .........................................................................

STEP 11 Storage Tray Installation........................................................................

STEP 12 Cable Adjustment..................................................................................

STEP 13 Stack Fork Inspections..........................................................................

5. OPERATION INSTRUCTION................................................................................

6. MAINTENANCE....................................................................................................

Maintenance Machine Maintenance......................................................................

Maintenance Schedule..........................................................................................

Maintenance Task List...........................................................................................

Maintenance One-Year Maintenance Log.............................................................

7. CONSIGNES DE SECURITE IMPORTANTES.....................................................

1

2

5

8

13

‘ ‘

17

20

24

25

26

28

29

32

33

34

35

36

39

40

41

42

43

P757 OWNER’S MANUAL CONTENTS

Congratulations on the purchase of a high quality SportsArt product, the P757 Leg

Extension machine. Constructed of high quality materials and designed for years of

reliable performance, this product was made for full commercial use.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of this

product will help ensure that exercisers obtain their fitness goals safely and

successfully.

1

1. INTRODUCTION

2

2. IMPORTANT SAFETY PRECAUTIONS

This product was designed and built for optimum safety. However certain precautions

apply during the use of this product. Please note the following safety precautions:

．Please read the entire manual before assembly and operation. Make sure the

product is installed and operated as instructed in this manual.

．Assemble and operate the product on a solid, level surface. Do not use outdoors

or near water, including pools and saunas.

．Check the product before every use. Make sure all parts are assembled, and all

fasteners are tightened. Do not use the product if it is disassembled in any way.

．Wear proper workout clothing. Do not wear loose clothing. Do not wear shoes with

leather soles or high heels. Tie all long hair back. Do not go barefoot on this

product.

．Keep away from moving parts. Moving parts may or may not stop immediately if an

object becomes caught or impedes normal motion.

．Use this product only for its intended purpose as described in this manual.

．Be careful when mounting and dismounting the unit.

．Never operate this product if it has been damaged in any way. If it is not working

properly, or has been dropped or damaged, contact a service technician for

repairs.

．Do not use accessories that are not specifically recommended by the

manufacturer. Such parts might cause injuries or cause the unit to fail.

．This product is not intended for use by persons (including children) with reduced

physical, sensory, or mental capabilities, or by people who are otherwise deficient

in product knowledge or experience. If such people use this product, they should

be given training and be supervised at all times by someone responsible for their

safety.

．Children should be supervised to ensure that they do not play on or near the

product.

．The user weight limit for this product is 227 kg, 500 lb.

CAUTION: If you feel any pain or any abnormal sensations, STOP YOUR

WORKOUT and consult your physician immediately. Work within your recommended

exercise level. DO NOT work to exhaustion. Before beginning any exercise program,

you should consult with your doctor. It is recommended that you undergo a complete

physical examination.

*NOTE: Regarding the decaled resistance on the unit weight stack, the actual weight

being lifted is configured at a ratio of 1:1. Example: If the stack fork is engaged at

60KG (132LB) at the weight stack, the actual pulling weight is 60KG (132LB).

．

Box A

3

3. LIST OF PARTS

Box B

Box C

4

No. Name Qty

No.

QtyDescription

A1

A2

A3

A4

A5

A6

A7

A8

A9

2

1

2

4

Box A - Main Frame Components

A10

A11

A12

A13

A14

A15

A16

A17

5

1

Weight stack top right cover

Weight stack top left cover

Main frame

Cover support plate B-2

Cover support plate B-1

Storage tray

Stack fork

Weight stack rod

Cover bracket

Cover support plate A

Cover

Pulley cover

Pulley

Rear cover

Front cover

Bracket

No. Name Qty

No.

QtyDescription

A20

A21

A23

A24

A25

1

Box B - User Frame Components

A26

A27

A28

A29

1

Cylindrical cushion arm

Connector A

Connector B

Connector C

CAM

Handle

Seat back

Seat frame

Seat bottom

No. Name Qty

No.

QtyDescription

A30

A31

1

Box C - Weight Plates Components

A32

15

1

Weight plate sticker (65kg~100kg/143lb~220lb)

5kg/11lb weight plate

No. Name Qty Notes

Specification

12

13

14

15

16

17

18

Components in the Hardware Kit

1

6

8

12

8

10

1

2

1

M6*P1.0*L12

SGN- 07

M6*P1.0*L12

M5*L15

M5* 0. 8* L8

D25

(M4)

(M5)

(M6)

(M8)

Screw soft cap

Phillips screw

Screw socket

Mushroom top inner hex screw

Mushroom top Phillips screw

Round sticker

L-shaped Allen wrench

Weight plate sticker (10kg~60kg/22lb ~132lb)

Round head inner hex screw

Bushing

19

M6*P1.0*L20

D19*7.8

No. Name

Specification

Components on the Product

Hex head screw

Spring washer

Washer

Nylon hex lock nut

Upper stack carriage set

Hex bolt

Washer

PU tube

Nylon hex lock nut

Guide rod

Round head inner hex screw

Spring washer

Washer

Round head inner hex screw

Axle cover

Mushroom top inner hex screw

Spring washer

Flat washer

CAM stop plate

Mushroom top inner hex screw

Cable set block

Mushroom top inner hex screw

Spring washer

Nylon hex lock nut

Round head inner hex screw

Mushroom top inner hex screw

Spring washer

Flat washer

Nylon hex lock nut

Mushroom top inner hex screw

Spring washer

Washer

6

21

22

23

26

27

29

30

33

34

35

Notes

24

25

28

31

32

M10*P1.5*L130

M10

D16*d10.2*t1.0

M10

M8*P1.25*L65

D17*d8.3*t2

∮D12*d8*L51

M8

M8*P1.25*L18

M8*t2.0

D17*d8*t1.5

M8*P1.25*L20

Ø65

M6*P1.0*L20

M6*P1.0*L12

M6

D20*d6.3*t1.5

M6*P1.0*L10

M6*P1.0*L20

M6

M8*P1.25*L20

M8*P1.25*L25

M8

D17*d8.3*t2

M8

M8*P1.25*L25

M8

D22*d8.2*t2

38

No. Name

Components in the Hardware Kit

2

1

(13*17)

Open end wrench

Phillips-head screw driver

Qty

Notes

Specification

7

No. Name

Specification

Components on the Product

44

43

Notes

M6*P1.0*L12

D20*d6.3*t1.5

M5*L8

Washer

Bevelled head Phillips screw

Nylon hex lock nut

Mushroom top inner hex screw

M8

M6*P1.0*L12

40

41

Seat back plate

39

Bevelled head inner hex screw

M8*P1.25*L20

Mushroom top inner hex screw

STEP 1 Cover Support Plate and the Connector Installation

8

4. ASSEMBLE THE PRODUCT

Follow instructions below to assemble this product. Note that in this manual the

words “left” and “right” are used to refer to the product and its parts. As such, these

designations correspond to the “left” and “right” sides of a person in position to

exercise on this product. Also, for brevity, the word “screws” or “nuts” is used where

washers and other hardware may be involved.

*Loosen and remove the screws (21) and the connecting plates from the connectors

(A27) (A28) (A29) as shown. Carefully set each piece aside.

9

(a). Insert the screw sockets (14) into place in the main frame (A3) as shown, and then

use the screws (15) (16) to secure the brackets (A16) (A17) in place.

(Note: The bracket (A16) must be secured to the top of maim frame as shown.)

10

(a)

(b). Use the screws (17) to secure the cover support plates (A10) to the straight

frame of the main frame (A3) and then secure the cover support plates (A4) (A5)

to the both side of the curved frame as shown.

(Note: The cover support plates must be secured outside of the bracket (A16)

(A17).)

(b)

11

(c)

seat frame (A24), and then secure the screws (21).

. Use the connectors (A27) (A28) (A29) to connect the main frame (A3) and the

12

STEP 2 Weight Stack Installation

13

(a). Hold the upper stack carriage set (22), and then cut the zip tie. Gently lower the

upper stack carriage set (22) into place as shown.

(b). Remove the screws (23). Set the guide rod (24) downward into place as shown.

(c). Tilt the guide rod (24) backward and then lift the upper stack carriage set (22) off

the guide rods as shown. Carefully set the upper stack carriage set (22) aside.

14

(c)

(a)

(b)

(d). Loosen and remove the screws (25) from the stack fork (A7) and insert the

weight stack rod (A8) into the central mounting position of the upper stack

carriage set (22). Use the screws (25) to secure the stack fork (A7) into place of

the upper stack carriage set (22) as shown.

(Note: Remove the stack fork first before assembling.)

(e). Insert and lower the (5 kg/11lb) weight plates (A30) into place on the guide rods

(24) one at a time. Once complete, slide down the upper stack carriage set (22)

on top of the weight stack.

(Note: The stack fork (A7) points toward the front.)

* If there is an optional (7.5kg/16.5lb) weight plate installed, insert the optional

weight plates first before the (5 kg/11lb) weight plates (A30).

(Note: The convex side of weight plate should face up.)

15

(e)

(d)

(f). Tilt the guide rods (24) back into place and then lift them up to their mounting

position, and then secure the assembly with the screws (23).

(f)

16

STEP 3 CAM Installation

17

(a). Loosen and remove the screw (26) and the cap (27) from the CAM (A20).

(b). Place the CAM (A20) horizontally into its mounting area, and then rotate

the cam so that the rotator arm is pointing downward as shown.

(Note: Due to the CAM hasn't been connected to the cable yet, to avoid any

injuries, please make sure no one is near the CAM.)

(c). Secure the axle cover (27) in place with the screw (26), and then apply the

round sticker (18) as shown.

(Note: The stopper must be rested below the tube as shown.)

18

(c)

(a)

(b)

(d). Loosen and remove the screws (28) from the CAM mounting area.

(e). Secure the cover (A11) with the screws (28).

(Note: The bakelite must be rested below the cover as shown.)

(d)

(e)

19

La page charge ...

SportsArt P757 Le manuel du propriétaire

SportsArt P757 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents