SportsArt P722 Le manuel du propriétaire

P722 OWNER’S MANUAL CONTENTS

1. INTRODUCTION ................................................................................ 2

2. SAFETY PRECAUTIONS .................................................................. 3

3. LIST OF PARTS ................................................................................. 4

4. ASSEMBLE THE PRODUCT ............................................................. 9

STEP 1 Cover Support Plate and the Connector Installation ................ 9

STEP 2 Weight Stack Installation ......................................................... 13

STEP 3 Apply the Weight Stack Sticker ............................................... 17

STEP 4 Cover Support Plate and the Front Cover Installation ............ 18

STEP 5 CAM Frame and the Cable Installation .................................... 19

STEP 6 Seat Bottom Installation ........................................................... 23

STEP 7 Seat back Installation ............................................................... 24

STEP 8 Rear Cover and Top Covers Installation .................................. 25

STEP 9 Storage Tray Installation .......................................................... 26

STEP 10 Cable Adjustment ................................................................... 27

STEP 11 Stack Fork Inspections ........................................................... 28

5. OPERATION INSTRUCTION ............................................................ 29

6. MAINTENANCE ................................................................................ 30

MAINTENANCE Schedule .................................................................... 31

MAINTENANCE Task List .................................................................... 32

MAINTENANCE One-Year Maintenance Log ....................................... 33

7. CONSIGNES DE SÉCURITÉ IMPORTANTES ................................. 34

2

1. INTRODUCTION

Congratulations on the purchase of a high quality SportsArt product, the P722 Pectoral

Fly / Rear Deltoid machine. Constructed of high quality materials and designed for

years of reliable performance, this product was made for full commercial use.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of

this product will help ensure that exercisers obtain their tness goals safely and

successfully.

3

2. SAFETY PRECAUTIONS

This product was designed and built for optimum safety. However certain precau-

tions apply during the use of this product. Please note the following safety precau-

tions:

• Please read the entire manual before assembly and operation. Make sure the

product is installed and operated as instructed in this manual.

• Assemble and operate the product on a solid, level surface. Do not use outdoors

or near water, including pools and saunas.

• Check the product before every use. Make sure all parts are assembled, and all

fasteners are tightened. Do not use the product if it is disassembled in any way.

• Wear proper workout clothing. Do not wear loose clothing. Do not wear shoes

with leather soles or high heels. Tie all long hair back. Do not go barefoot on this

product.

• Keep away from moving parts. Moving parts may or may not stop immediately if

an object becomes caught or impedes normal motion.

• Use this product only for its intended purpose as described in this manual.

• Be careful when mounting and dismounting the unit.

• Never operate this product if it has been damaged in any way. If it is not work-

ing properly, or has been dropped or damaged, contact a service technician for

repairs.

• Do not use accessories that are not specifically recommended by the manufac-

turer. Such parts might cause injuries or cause the unit to fail.

• This product is not intended for use by persons (including children) with reduced

physical, sensory, or mental capabilities, or by people who are otherwise defi-

cient in product knowledge or experience. If such people use this product, they

should be given training and be supervised at all times by someone responsible

for their safety.

• Children should be supervised to ensure that they do not play on or near the

product.

• The user weight limit for this product is 227 kg, 500 lb.

CAUTION: If you feel any pain or any abnormal sensations, STOP YOUR WORK-

OUT and consult your physician immediately. Work within your recommended ex-

ercise level. DO NOT work to exhaustion. Before beginning any exercise program,

you should consult with your doctor. It is recommended that you undergo a complete

physical examination.

*NOTE: Regarding the decaled resistance on the unit weight stack, the actual weight

being lifted is configured at a ratio of 1:1. Example: If the stack fork is engaged at

60KG (132LB) at the weight stack, the actual pulling weight is 60KG (132LB).

4

3. LIST OF PARTS

Box A

5

Box B

Box C

6

Box A - Main Frame Components

No. Name Qty. No. Name Qty.

A1

Weight stack top right

cover

1 A8 Stack rod 1

A2

Weight stack top left

cover

1 A9 Cover bracket 5

A3 Main frame 1 A10 Cover support plate A 2

A4 Cover support plate B-2 1 A11 Bracket 5

A5 Cover support plate B-1 1 A12 Pulley 1

A6 Storage tray 1 A14 Rear cover 1

A7 Stack fork 1 A15 Front cover 1

Box B - User Frame Components

No. Name Qty. No. Name Qty.

A20 CAM frame 1 A23 Vertical support 1

A21 Left arm with handle 1 A24 Seat bottom/back 2

A22 Right arm with handle 1 A25 Seat frame 1

Box C - Weight Plates Components

No. Name Qty. No. Name Qty.

A30 5kg/11lb weight plate 15 A32

Weight plate sticker

(65kg~100kg/143lb

~220lb)

1

A31

Weight plate sticker

(10kg~60kg/22lb

~132lb)

1

7

Components on the Product

No. Name Specication Notes

30

Hex head screw M10*P1.5*L30

Spring washer M10

Washer D16*d10.2*t1.0

31 Upper stack carriage set

32

Hex head screw M8*P1.25*L65

Flat washer D17*d8.3*t2

PU tube D12*d8*L51

Nylon hex lock nut M8

33 Guide rod

34

Round head inner hex screw M8*P1.25*L18

Spring washer M8*t2.0

Flat washer D17*d8*t1.5

Components in the Hardware Kit

No. Name Qty. Specication Notes

10 Screw socket 10 SGN-07

11 Mushroom top Phillips screw 10 M5*L15

12 Mushroom top Phillips screw 10 M5*0.8*L8

13

Hex head screw 2 M10*P1.5*L30

Spring washer 2 M10

Flat washer 4 D21*d10.5*t2

Nylon hex lock nut 2 M10

14 Mushroom top inner hex screw 10 M6*P1.0*L12

15

Round head inner hex screw 3 M6*P1.0*20

Bushing 3 D21.5*10.5

16 Round head phillips screw 6 M6*P1.0*L12

L-shaped Allen wrench 2 (M4)

L-shaped Allen wrench 1 (M5)

L-shaped Allen wrench 1 (M6)

Open end wrench 2 (13*17)

Phillips-head screw driver 1

8

Components on the Product

No. Name Specication Notes

35

Round head inner hex screw M8*P1.25*L20

Flat washer D26*d8.3*t3

Bushing D20*d15*L17

36

Mushroom top inner hex screw M8*P1.25*L25

Spring washer M8

37

Bevelled head inner hex screw M8*P1.25*L20

Nylon hex lock nut M8

38

Mushroom top inner hex screw M6*P1.0*L12

Flat washer D20*d6.3*t1.5

39 Bevelled head Phillips screw M5*L8

40

Hex head screw M10*P1.5*L75

Spring washer M10

Washer D16*d10.2*t1.0

Connecting board A

Bushing D16*t2*L39

Nylon hex lock nut M10

41 Round head inner hex screw M5*P0.8*L30

42 Cover

43

Mushroom top inner hex screw M6*P1.0*L20

Spring washer M6

Nylon hex lock nut M6

44 Cable set block

45

Mushroom top inner hex screw M6*P1.0*L12

Spring washer M6

Flat washer D20*d6.3*t1.5

Pulley cover

Pulley ØD126*20

9

4. ASSEMBLE THE PRODUCT

Follow instructions below to assemble this product. Note that in this manual

the words “left” and “right” are used to refer to the product and its parts. As

such, these designations correspond to the “left” and “right” sides of a person

in position to exercise on this product. Also, for brevity, the word “screws” or

“nuts” is used where washers and other hardware may be involved.

STEP 1 Cover Support Plate and the Connector Installation

10

Seat frame installation

(a). Loosen and remove the screws (30) from the main frame (A3) as

shown.

(b). Use the screws (30) to secure the seat frame (A23) to the main frame

(A3) as shown.

(a)

(b)

11

Brackets and cover support plates installation

(a). Insert the screw sockets (10) into place in the main frame (A3) as

shown, and then use the screws (11) to secure the brackets (A11)

in place.

(a)

12

(b). Use the screws (12) to secure the cover support plates (A10) to the

straight frame of the main frame (A3) and then secure the cover

support plates (A4) (A5) to the both side of the curved frame as shown.

(Note: The cover support plates must be secured outside of the bracket

(A11).)

(b)

13

STEP 2 Weight Stack Installation

14

(a). Hold the upper stack carriage set (31), and then cut the zip tie. Gently

lower the upper stack carriage set (31) into place as shown.

(b). Remove the screws (32). Set the guide rod (33) downward into place as

shown.

(c). Tilt the guide rod (33) backward and then lift the upper stack carriage

set (31) off the guide rods as shown. Carefully set the upper stack

carriage set (31) aside.

(c)

(b)

(a)

15

(d). Loosen and remove the screws (34) from the stack fork (A7) and insert

the weight stack rod (A8) into the central mounting position of the upper

stack carriage set (31). Use the screws (34) to secure the stack fork

(A7) into place of the upper stack carriage set (31) as shown.

(Note: Remove the stack fork first before assembling.)

(e). Insert and lower the (5 kg/11lb) weight plates (A30) into place on the

guide rods (33) one at a time. Once complete, slide down the upper

stack carriage set (31) on top of the weight stack.

(Note: The convex side of weight plate should face up and the stack

fork (A7) points toward the front.)

* If there is an optional (7.5kg/16.5lb) weight plate installed, insert the

optional weight plates first before the (5 kg/11lb) weight plates (A30).

(e)

(d)

16

(f). Tilt the guide rods (33) back into place and then lift them up to their

mounting position, and then secure the assembly with the screws (32).

(f)

17

STEP 3 Apply the Weight Stack Sticker

Note: Before applying weight plate stickers, please wipe the area clean, and

clean your hands before proceeding to the next step.

(a). Align and tape the cardboard to the upper left corner of the weight plate

(A30).

(b). Peel off the top half of the weight sticker (A31) backing. Leave the clear

outside margin in place on the sticker. Don’t peel off the margin.

(c). Press the numbered part of the sticker in place

(d). Peel off the clear margin of the sticker.

(e). Follow steps (b) ~ (d) to apply the weight plate sticker (A32) to the lower

part of the weight stack. When the stickers are in place, peel off the card

board. Press the sticker in place to ensure good contact on the weight

plate.

*If there are additional optional weight plates, use the optional weight plate

stickers.

(b)

(a)

(c)

(d)

(e)

18

STEP 4 Cover Support Plate and the Front Cover Installation

(a). Use the screws (14) to secure the cover bracket (A9) in place on the

main frame (A3) as shown.

(b). Slide the front cover (A15) from the top down into the cover support

plates’ grooves.

(Note: Take out the stack fork (A7) and place it on the upper stack

carriage set (31) as shown to avoid damaging to the cover.

(c). Secure the assembly with the screw (15) as shown.

(b)

(a)

(c)

19

STEP 5 CAM Frame and the Cable Installation

20

(a). Use the screws (13) to loosely secure the vertical support (A23) to the

seat frame (A25) as shown.

(b). Loosen and remove the screws (13) (35) (40) (41) (43) from the CAM

frame (A20) and then remove the cover (42) and the cable set block

(44) as shown.

(c). Set the CAM frame (A20) horizontally on the vertical support (A23) and

the main frame (A3) as shown and then align holes and secure the

assembly with the screws (13) (40). Tighten the screws (13) of the seat

frame (A25) and the vertical support (A23).

(a)

(b)

(c)

La page charge ...

SportsArt P722 Le manuel du propriétaire

SportsArt P722 Le manuel du propriétaire

dans d''autres langues

Documents connexes