SportsArt DF201 Le manuel du propriétaire

DF-201

Horizontal Leg Press

Owner’s Manual

ISO 9001/14001 Certied GoSportsArt.com 2016.05

Sports Art Industrial Co., Ltd. (Headquarter)

#11, Gong Huan Road,

Tainan City, Taiwan

T: 886 6 3840888

F: 886 6 3840999

[email protected]

Sports Art America Inc.

19510 144th Ave. N.E., Suite A-1,

Woodinville, WA 98072

T: +1 425 4819479

F: +1 425 4888155

[email protected]

Sports Art Fitness UK Ltd.

Unit 2, 3 Charnwood Business Park,

North Road, Loughborough,

LE11 1LE, England

T: +44 1509 274440

[email protected]

Sports Art Europe, Middle East & Africa

Strada Cantonale 42, Ch-6534 San Vittore,

Switzerland

T: +41 91 8273908

F: +41 91 8273910

[email protected]

Sports Art China

Room 2202, BLDG. A, Huapu Garden,

Dongzhimen South Street, No. 9,

Dongcheng District Beijing, 100007 China

T: +86 10 84094122/84094123

F: +86 10 84094121

DF-201 OWNER’S MANUAL CONTENTS

1. INTRODUCTION ................................................................................ 2

2. SAFETY PRECAUTIONS .................................................................. 3

3. LIST OF PARTS ................................................................................. 4

4. ASSEMBLE THE PRODUCT ............................................................. 9

STEP 1 Seat Frame and the Connector Installation .............................. 9

STEP 2 Weight Stack Installation ......................................................... 12

STEP 3 Cable Installation .................................................................... 16

STEP 4 Cable Adjustment ..................................................................... 18

STEP 5 Cable Slack Adjustment ........................................................... 19

STEP 6 Foot Press Plate Installation .................................................... 20

STEP 7 Handle Installation ................................................................... 22

STEP 8 Seat Bottom Installation ........................................................... 23

STEP 9 Seat Back Installation .............................................................. 25

STEP 10 Apply the Weight Stack Sticker .............................................. 26

STEP 11 Cover Support Plate Installation ............................................ 27

STEP 12 Front Cover and Rear Cover Installation ............................... 29

STEP 13 Top Covers Installation .......................................................... 30

STEP 14 Storage Tray Installation ........................................................ 31

STEP 15 Secure the Product ................................................................ 32

STEP 16 Stack Fork Inspections .......................................................... 33

5. OPERATION INSTRUCTION ............................................................ 34

OPERATION Operating the Product ..................................................... 34

OPERATION Exercising Instructions ..................................................... 35

OPERATION Safety Operating Area .................................................... 36

6. MAINTENANCE ................................................................................ 37

MAINTENANCE Safety Precautions ................................................... 37

MAINTENANCE Guide Rod Cleaning and Lubricating ....................... 38

MAINTENANCE Schedule .................................................................... 39

MAINTENANCE Task List .................................................................... 40

MAINTENANCE One-Year Maintenance Log ....................................... 41

7. CONSIGNES DE SÉCURITÉ IMPORTANTES ................................. 42

2

1. INTRODUCTION

Congratulations on the purchase of a high quality SportsArt product, the DF-201

Horizontal Leg Press machine. Constructed of high quality materials and designed for

years of reliable performance, this product was made for full commercial use.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of

this product will help ensure that exercisers obtain their tness goals safely and

successfully.

3

2. SAFETY PRECAUTIONS

This product was designed and built for optimum safety. However certain precau-

tions apply during the use of this product. Please note the following safety precau-

tions:

• Please read the entire manual before assembly and operation. Make sure the

product is installed and operated as instructed in this manual.

• Assemble and operate the product on a solid, level surface. Do not use outdoors

or near water, including pools and saunas.

• Check the product before every use. Make sure all parts are assembled, and all

fasteners are tightened. Do not use the product if it is disassembled in any way.

• Wear proper workout clothing. Do not wear loose clothing. Do not wear shoes

with leather soles or high heels. Tie all long hair back. Do not go barefoot on this

product.

• Keep away from moving parts. Moving parts may or may not stop immediately if

an object becomes caught or impedes normal motion.

• Use this product only for its intended purpose as described in this manual.

• Be careful when mounting and dismounting the unit.

• Never operate this product if it has been damaged in any way. If it is not work-

ing properly, or has been dropped or damaged, contact a service technician for

repairs.

• Do not use accessories or parts that are not specifically recommended by the

manufacturer (SportsArt) . Such parts might cause injuries or cause the unit to

fail and void the warranty. We will not be responsible for any safety issue that

arises due to the misuse of accessories or parts. At the same time, we will termi-

nate the warranty terms of this equipment.

• This product is not intended for use by persons (including children 12 or younger)

with reduced physical, sensory, or mental capabilities, or by people who are

otherwise deficient in product knowledge or experience. If such people use this

product, they should be given training and be supervised at all times by some-

one responsible for their safety.

• Children 12 or younger should be supervised to ensure that they do not play on

or near the product.

• The user weight limit for this product is 227 kg, 500 lb.

• Maintenance and repair must be performed by trained service personnel

only.

CAUTION: If you feel any pain or any abnormal sensations, STOP YOUR WORK-

OUT and consult your physician immediately. Work within your recommended ex-

ercise level. DO NOT work to exhaustion. Before beginning any exercise program,

you should consult with your doctor. It is recommended that you undergo a complete

physical examination.

*NOTE: Each machine provides a different resistance ratio of weight stack.

4

3. LIST OF PARTS

Box A

5

Box B

Box C

6

Box A - Main Frame Components

No. Name Qty. No. Name Qty.

A1 Weight stack top right cover 1 A9 Cover bracket 4

A2 Weight stack top left cover 1 A10 Cover support plate A 2

A3 Main frame 1 A14 Rear cover 1

A4 Cover support plate B-2 1 A15 Front cover 1

A5 Cover support plate B-1 1 A16 Bracket 5

A6 Storage tray 1 A17 Floor xing bracket 1

A7 Stack fork 1 A18 U bracket 1

A8 Weight stack rod 1

Box B - User Frame Components

No. Name Qty. No. Name Qty.

A20 Upper stack carriage set 1 A26 Handle 1

A21 Foot press plate 1 A27 Connector A 1

A22 Stopper 1 A28 Connector B 1

A23 Seat back 1 A29 Connector C 1

A24 Seat frame 1 A30 Ø50 Connecting board 2

A25 Seat bottom 1 A31 Ø50 Connecting board A 1

Box C - Weight Plates Components

No. Name Qty. No. Name Qty.

A40 5kg/11lb weight plate 7 A42 Weight plate sticker 2

A41 7.5kg/15lb weight plate 8

Note: The total weight plate is 15PCS. If your optional weight is 80kg,

there will be 15PCS 5kg/11lb weight plates instead, without 7.5kg/15lb

weight plates.

Components in the Hardware Kit

No. Name Qty. Specication Notes

10 Mushroom top inner hex screw 8 M6*P1.0*L12

11 Phillips screw 6 M6*P1.0*L12

12

Round head inner hex screw 2 M6*P1.0*20

Bushing 2 D19*7.8

13 Screw socket 10 SGN-07

14 Mushroom top inner hex screw 12 M6*P1.0*L12

7

Components on the Product

No. Name Specication Notes

30

Hex head screw M10*P1.5*L130

Spring washer M10

Washer D16*d10.2*t1.0

Nylon hex lock nut M10

31

Mushroom top inner hex screw M10*P1.5*L25

Washer D44*d10.5*t3.0

32

Hex bolt M10*P1.5*L75

Spring washer M10

Washer D16*d10.2*t1.0

Connector plate C W60*L156*t5

Bushing D16*t2*L39

Hex lock nut M10

Nylon hex lock nut M10

33

Hex head screw M10*P1.5*L30

Spring washer M10

Washer D16*d10.2*t1.0

35

Hex head screw M8*P1.25*L65

Flat washer D17*d8.3*t2

PU tube D12*d8*L51

Nylon hex lock nut M8

36 Guide rod

37 Cotter pin 1.6t

Components in the Hardware Kit

No. Name Qty. Specication Notes

15 Mushroom top Phillips screw 10 M5*L15

16 Mushroom top Phillips screw 10 M5*0.8*L8

17 Front cover support plate 1

18

Flat washer 2 D27*d6.3*t3.0

Mushroom top inner hex screw 2 M5*L20

L-shaped Allen wrench 2 (M4)

L-shaped Allen wrench 1 (M5)

L-shaped Allen wrench 1 (M6)

L-shaped Allen wrench 1 (M8)

Open end wrench 2 (13*17)

T-shaped Allen wrench 1 (M4)

Phillips-head screw driver 1

8

Components on the Product

No. Name Specication Notes

37

Rubber washer D20*d11.1*t2

Stopper

Pin Ø10.8*L50.5

38

Round head inner hex screw M6*L30002230631

Spring washer M6*t1.5

Flat washer D20*d6.3*t1.5

39 Round head inner hex screw M5*P0.8*L10

40

Mushroom top inner hex screw M6*P1.0*L12

Spring washer M6

Flat washer D20*d6.3*t1.5

Axle D15*L26

41

Nylon hex lock nut M6*P1.0*6

Flat washer D20*d6.3*t1.5

Axle D8*L54.5

Bushing D12*d8*L7

42 Soft cap D14

43

Round head inner hex screw M8*P1.25*L25

Spring washer M8*t2.0

Flat washer D17*d8*t1.5

Nylon hex lock nut M8*P1.25

44

Round head inner hex screw M8*P1.25*L20

Spring washer M8

Flat washer D26*d8.3*t3

Axle D20*L153

45

Mushroom top inner hex screw M8*P1.25*L25

Spring washer M8

Flat washer D17*d8.3*t2

Nylon hex lock nut M8

46

Mushroom top inner hex screw M8*P1.25*L25

Spring washer M8

Flat washer D22*d8.2*t2

47

Mushroom top inner hex screw M8*P1.25*L25

Spring washer M8

Flat washer D22*d8.2*t2

48

Bevelled head inner hex screw M8*P1.25*L20

Nylon hex lock nut M8

49

Mushroom top Phillips screw M5*0.8*L15

Flat washer D13*d6*t1.0

9

4. ASSEMBLE THE PRODUCT

Follow instructions below to assemble this product. Note that in this manual

the words “left” and “right” are used to refer to the product and its parts. As

such, these designations correspond to the “left” and “right” sides of a person

in position to exercise on this product. Also, for brevity, the word “screws” or

“nuts” is used where washers and other hardware may be involved.

STEP 1 Seat Frame and the Connector Installation

10

STEP 1 Seat Frame and the Connector Installation (Cont.)

* Loosen and remove screws (31) (32) (33) and the connecting plates from

the components (A3) (A24) (A27) as shown. Carefully set each piece

aside.

11

STEP 1 Seat Frame and the Connector Installation (Cont.)

(a) Use screws (30) to secure the connecting board A (A31) to the

connector B (A28) and the main frame (A3) in area A. Use screws (32)

to secure the connector B (A28) to the seat frame (A24) in area B. And

then use screws (30) (31) (33) to secure the connecting board (A30) to

the connector A (A27), the connector C (A29), the main frame (A3) and

the seat frame (A24) as shown.

A

B

12

STEP 2 Weight Stack Installation

13

STEP 2 Weight Stack Installation (Continued)

(a) Remove screws (35) from the guide rod (36). Set the guide rod (36)

downward into place as shown.

(b) Remove the pin (37) and the rubber washer from the guide rod (36).

(b)

(a)

14

STEP 2 Weight Stack Installation (Continued)

(c) Loosen and remove screws (38) (39) from the stack fork (A7).

(d) Insert the weight stack rod (A8) into the central mounting position of the

upper stack carriage set (A20). Use screws (38) (39) to secure the stack

fork (A7) and the cable bracket into place of the upper stack carriage

set (A20) as shown.

(Note: Remove the stack fork first before assembling.)

(d)

(c)

15

STEP 2 Weight Stack Installation (Continued)

(e) Insert and lower the (5 kg/11lb) weight plates (A40) into place on the

guide rods (36) one at a time. Once complete, slide down the upper

stack carriage set (A20) on top of the weight stack.

(Note: The convex side of weight plate should face up and the stack

fork (A7) points toward the front.)

* If there is an optional (7.5kg/16.5lb) weight plate installed, insert the

optional weight plates first before the (5 kg/11lb) weight plates (A40).

(f) Tilt the guide rods (36) back into place and re-install the rubber washer

to the guide rods (36), and then align holes and secure the pin (37) back

into the place as shown.

(g) Lift the guide rods up to their mounting position, and then secure them

with screws (35).

(f)

(e)

(g)

16

STEP 3 Cable Installation

(a) Loosen and remove screws (40) from area A and B as shown.

A

B

17

STEP 3 Cable Installation (Continued)

(b) First, cut the zip tie on the cable. Disconnect the feeder cord from area

B and wrap this feeder cord around the cable nut. Tread the cable onto

the pulley at area B as indicated, and then secure the pulley with screws

(40). Pull the feeder cord at area A to thread the cable through the pulley

at area A as indicated and then secure the cover plate back into place

with screws (40). Finally, disconnect the feeder cord and secure the

cable to the guide rods as shown.

(Note: In securing the cover plate, place the cover plate horizontal to, but not

touching the cable.)

A

B

18

STEP 4 Cable Adjustment

Please follow the following instructions to adjust the cable.

* Insert the stack fork into the gap under the lowest weight plate, and then

adjust the large nut at area C. Adjust until the upper stack carriage set

moves slightly.

* To adjust the cable, first insert the (Z) rod and loosen the (Y) nut, and

then adjust the (X) nut. If the cable is too long, adjust the (X) nut

downward. If too short, adjust the (X) nut upward. After adjusting the (X)

nut, tighten the (Y) nut against the weight stack to secure this position.

19

STEP 5 Cable Slack Adjustment

* If area C can no longer be adjusted, set distance at area C to 30mm.

Remove screws (41) from hole E of area D and the soft cap (42) from area

F, and then insert the cable nut into hole F and secure with screws (41).

Finally, insert the soft cap (42) into area E as shown. Follow “Cable

Adjustment” to secure the cable, and then adjust the cable tightness.

La page charge ...

SportsArt DF201 Le manuel du propriétaire

SportsArt DF201 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents