SportsArt DF207 Le manuel du propriétaire

DF-207

Assisted Chin And Dip

Owner’s Manual

ISO 9001/14001 Certied GoSportsArt.com 2016.05

Sports Art Industrial Co., Ltd. (Headquarter)

#11, Gong Huan Road,

Tainan City, Taiwan

T: 886 6 3840888

F: 886 6 3840999

[email protected]

Sports Art America Inc.

19510 144th Ave. N.E., Suite A-1,

Woodinville, WA 98072

T: +1 425 4819479

F: +1 425 4888155

[email protected]

Sports Art Fitness UK Ltd.

Unit 2, 3 Charnwood Business Park,

North Road, Loughborough,

LE11 1LE, England

T: +44 1509 274440

[email protected]

Sports Art Europe, Middle East & Africa

Strada Cantonale 42, Ch-6534 San Vittore,

Switzerland

T: +41 91 8273908

F: +41 91 8273910

[email protected]

Sports Art China

Room 2202, BLDG. A, Huapu Garden,

Dongzhimen South Street, No. 9,

Dongcheng District Beijing, 100007 China

T: +86 10 84094122/84094123

F: +86 10 84094121

DF-207 OWNER’S MANUAL CONTENTS

1. INTRODUCTION ................................................................................ 2

2. SAFETY PRECAUTIONS .................................................................. 3

3. LIST OF PARTS ................................................................................. 4

4. ASSEMBLE THE PRODUCT ............................................................. 7

STEP 1 Cover Support Plate, Connector and Front Support Installation 7

STEP 2 Weight Stack Installation ......................................................... 10

STEP 3 Apply the Weight Stack Sticker ............................................... 13

STEP 4 Rear Cover Installation ............................................................ 14

STEP 5 Top Covers Installation ............................................................ 16

STEP 6 Seat Bottom Installation .......................................................... 17

STEP 7 Handles Installation ................................................................ 18

STEP 8 Storage Tray Installation ......................................................... 19

STEP 9 Secure the Product ................................................................. 20

STEP 10 Cable Adjustment .................................................................. 21

STEP 11 Stack Fork Inspections .......................................................... 22

5. OPERATION INSTRUCTION ............................................................ 23

OPERATION Operating the Product ..................................................... 23

OPERATION Exercising Instructions ..................................................... 24

OPERATION Safety Operating Area ...................................................... 25

6. MAINTENANCE ................................................................................ 26

MAINTENANCE Safety Precautions ................................................... 26

MAINTENANCE Guide Rod Cleaning and Lubricating ....................... 27

MAINTENANCE Schedule .................................................................... 28

MAINTENANCE Task List .................................................................... 29

MAINTENANCE One-Year Maintenance Log ....................................... 30

7. CONSIGNES DE SÉCURITÉ IMPORTANTES ................................. 31

2

1. INTRODUCTION

Congratulations on the purchase of a high quality SportsArt product, the DF-207

Assisted Chin and Dip machine. Constructed of high quality materials and designed

for years of reliable performance, this product was made for full commercial use.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of

this product will help ensure that exercisers obtain their tness goals safely and

successfully.

3

2. SAFETY PRECAUTIONS

This product was designed and built for optimum safety. However certain precau-

tions apply during the use of this product. Please note the following safety precau-

tions:

• Please read the entire manual before assembly and operation. Make sure the

product is installed and operated as instructed in this manual.

• Assemble and operate the product on a solid, level surface. Do not use outdoors

or near water, including pools and saunas.

• Check the product before every use. Make sure all parts are assembled, and all

fasteners are tightened. Do not use the product if it is disassembled in any way.

• Wear proper workout clothing. Do not wear loose clothing. Do not wear shoes

with leather soles or high heels. Tie all long hair back. Do not go barefoot on this

product.

• Keep away from moving parts. Moving parts may or may not stop immediately if

an object becomes caught or impedes normal motion.

• Use this product only for its intended purpose as described in this manual.

• Be careful when mounting and dismounting the unit.

• Never operate this product if it has been damaged in any way. If it is not work-

ing properly, or has been dropped or damaged, contact a service technician for

repairs.

• Do not use accessories or parts that are not specifically recommended by the

manufacturer (SportsArt) . Such parts might cause injuries or cause the unit to

fail and void the warranty. We will not be responsible for any safety issue that

arises due to the misuse of accessories or parts. At the same time, we will termi-

nate the warranty terms of this equipment.

• This product is not intended for use by persons (including children 12 or younger)

with reduced physical, sensory, or mental capabilities, or by people who are

otherwise deficient in product knowledge or experience. If such people use this

product, they should be given training and be supervised at all times by some-

one responsible for their safety.

• Children 12 or younger should be supervised to ensure that they do not play on

or near the product.

• The user weight limit for this product is 227 kg, 500 lb.

• Maintenance and repair must be performed by trained service personnel

only.

CAUTION: If you feel any pain or any abnormal sensations, STOP YOUR WORK-

OUT and consult your physician immediately. Work within your recommended ex-

ercise level. DO NOT work to exhaustion. Before beginning any exercise program,

you should consult with your doctor. It is recommended that you undergo a complete

physical examination.

*NOTE: Each machine provides a different resistance ratio of weight stack.

4

3. LIST OF PARTS

Box A

Box B

5

Box A - Main Frame Components

No. Name Qty. No. Name Qty.

A1 Weight stack top right cover 1 A9 Cover bracket 3

A2 Weight stack top left cover 1 A10 Cover support plate A 1

A3 Main frame 1 A11 Ø50 Connector 2

A4 Cover support plate B-2 1 A12 Knee cushion 1

A5 Top handle frame 1 A13 Rear support 2

A6 Storage tray 1 A14 Rear cover 1

A7 Right and left handles 2 A15 Front support 2

A8 Connector 1 A16 Bracket 5

Box B - Weight Plates Components

No. Name Qty. No. Name Qty.

A30 5kg/11lb weight plate 19 A31 Weight plate sticker 1

Components in the Hardware Kit

No. Name Qty. Specication Notes

12

Hex head screw 8 M10*P1.5*L130

Spring washer 8 M10

Washer 16 D16*d10.2*t1.0

Nylon hex lock nut 8 M10

13 Phillips screw 6 M6*P1.0*L12

14 Screw socket 10 SGN-07

15 Mushroom top inner hex screw 12 M6*P1.0*L12

16 Mushroom top Phillips screw 10 M5*L15

17 Mushroom top Phillips screw 5 M5*P0.8*L8

18

Round head inner hex screw 1 M6*P1.0*L12

Bushing 1 D19*7.8

19

Flat washer 2 D27*d6.3*t3.0

Mushroom top inner hex screw 2 M5*L20

20 Floor xing bracket 1

21 U bracket 1

6

Components on the Product

No. Name Specication Notes

22 Upper stack carriage set

23

Hex bolt M8*P1.25*L65

Washer D17*d8.3*t2

PU tube D12*d8*L51

Nylon hex lock nut M8

24 Guide rod

25 Mushroom top inner hex screw M6*P1.0*L12

26 Mushroom top Phillips screw M5*0.8*L8

27

Mushroom top inner hex screw M8*P1.25*L25

Spring washer M8

Flat washer D22*d8.2*t2

28

Round head inner hex screw M6*L8

Spring washer M6*t1.5

29

Round head inner hex screw M10*P1.5*L15

Washer D16*d10.2*t1.0

Spring washer M10

30

Round head inner hex screw M10*L20

Spring washer M10

Washer D26*d10.3*t3.0

Components in the Hardware Kit

No. Name Qty. Specication Notes

L-shaped Allen wrench 1 (M5)

L-shaped Allen wrench 1 (M6)

L-shaped Allen wrench 1 (M8)

Open end wrench 2 (13*17)

Phillips-head screw driver 1

7

4. ASSEMBLE THE PRODUCT

Follow instructions below to assemble this product. Note that in this manual

the words “left” and “right” are used to refer to the product and its parts. As

such, these designations correspond to the “left” and “right” sides of a person

in position to exercise on this product. Also, for brevity, the word “screws” or

“nuts” is used where washers and other hardware may be involved.

STEP 1 Cover Support, Connector & Front Support Installation

8

STEP 1 Cover Support, Connector & Front Support Installation (Cont.)

* Do NOT cut the zip tie of seat frame when you lift the main frame up.

* We recommend you to assemble the machine with at least two people.

(a) Insert the screw sockets (14) into place in the main frame (A3) as

shown, and then use screws (16) to secure the brackets (A16) in place.

(Note: The prominent side of bracket (A16) must be secured in back of

main frame.)

(b). Use screws (17) to secure the cover support plates (A10) to the straight

frame of the main frame (A3) and then secure the cover support plates

(A4) to the side of the curved frame as shown.

(b)

(a)

9

STEP 1 Cover Support, Connector & Front Support Installation (Cont.)

(c) Use the connector (A11) to connect the front support (A15) and secure

with screws (12) at area A as shown and then secure the rear support

(A13) to the front support (A15) with screws (12) at area B as shown.

A

B

10

STEP 2 Weight Stack Installation

11

STEP 2 Weight Stack Installation (Continued)

(a) Hold the upper stack carriage set (22), and then cut the zip tie. Gently

lower the upper stack carriage set (22) into place as shown.

(b) Remove screws (23). Set the guide rod (24) downward into place as

shown.

(c) Tilt the guide rod (24) backward and then lift the upper stack carriage

set (22) off the guide rods as shown. Carefully set the upper stack

carriage set (22) aside and Do NOT gave a strong pull at the cable.

(a)

(c)

(b)

12

STEP 2 Weight Stack Installation (Continued)

(d) Insert and lower the (5 kg/11lb) weight plates (A30) into place on the

guide rods (24) one at a time. Once complete, slide down the upper

stack carriage set (22) on top of the weight stack.

(Note: The convex side of weight plate should face up and the stack fork

(A7) points toward the front.)

* If there is an optional (7.5kg/16.5lb) weight plate installed, insert the

optional weight plates first before the (5 kg/11lb) weight plates (A30).

(e) Tilt the guide rods (24) back into place and then lift them up to their

mounting position, and then secure the assembly with screws (23).

(d)

(e)

13

STEP 3 Apply the Weight Stack Sticker

Note: Before applying weight plate stickers, please wipe the area clean, and

clean your hands before proceeding to the next step.

(a) Align and tape the cardboard to the upper left corner of the weight plate

(A40).

(b) Peel off the top half of the weight plate sticker(A41) backing. Leave the

clear outside margin in place on the sticker. Don’t peel off the margin.

(c) Press the numbered part of the sticker in place while you peel off the

clear margin of the sticker.

(d) Peel off the clear margin of the sticker.

(e) Follow steps (b) ~ (d) to apply another weight plate sticker to the lower

part of the weight stack. When the stickers are in place, peel off the

cardboard. Press the sticker in place to ensure good contact on the

weight plate.

*If there are additional optional weight plates, use the optional weight plate

stickers.

(b)

(a)

(c)

(d)

(e)

14

STEP 4 Rear Cover Sticker Installation

(a) Loosen and remove screws (25) from the main frame (A3).

(b) Use screws (25) to secure the cover bracket (A9) in place on the main

frame (A3) as shown.

(b )

(a )

15

STEP 4 Rear Cover Sticker Installation (Continued)

(c) Slide the rear cover (A14) from the top down into the cover support plates’

grooves (A4) (A10).

(d) Secure the assembly with screw (18) as shown.

(d)

(c)

16

STEP 5 Top Covers Installation

(a). Use screws (13) to secure the weight stack top right cover (A1) and the

top left cover (A2) in place on the main frame as shown.

(b). Loosen and remove screws (26) from the weight stack top right cover

(A1) and the top left cover (A2), and then use screws (26) to secure the

connector (A8) from down on the inner bracket of the top covers.

(Note: The opening of the connector should face inward as shown.)

(b )

(a )

17

STEP 6 Seat Bottom Installation

(a) Before assembling the seat bottom, hold the bar of seat frame as shown,

and then cut the zip tie. Gently heighten the seat frame into place as

shown.

(b) Loosen and remove screws (27) from the knee cushion (A12).

(c) Secure the knee cushion (A12) to the seat frame with screws (27) as

shown.

(a)

(c)

(b)

18

STEP 7 Handles Installation

(a) Loosen and remove screws (28) from the right and left handles (A7).

(b) Insert the right and left handles (A7) onto their mount stems on the main

frame and secure them in place with screws (28) as shown.

(c) Loosen and remove screws (29) (30) from the main frame (A3).

(d) Put the top handle frame (A5) on the main frame (A3), and then align

holes and secure the assembly with screws (29) (30).

(d)

(c)

(b)

(a)

19

STEP 8 Storage Tray Installation

(a) Align the storage tray (A6) to the holes in the main frame, and then secure

the storage tray with screws (19) as shown.

(a)

La page charge ...

SportsArt DF207 Le manuel du propriétaire

SportsArt DF207 Le manuel du propriétaire

dans d''autres langues

Documents connexes