Canvas Tavio 5-Light Le manuel du propriétaire

ASSEMBLY INSTRUCTIONS

HAVING TROUBLE?

TOLL-FREE:

1-888-670-6684

IMPORTANT:Pleasereadthismanualcarefully

beforebeginningassemblyofthisproduct.

Keepthismanualforfuturereference.

PRODUCT NO.

ASSEMBLY INSTRUCTIONS

HAVING TROUBLE?

TOLL-FREE:

1-888-670-6684

IMPORTANT: Please read this manual carefully

before beginning assembly of this product.

Keep this manual for future reference.

ASSEMBLY INSTRUCTIONS

HAVING TROUBLE?

TOLL-FREE:

1-888-670-6684

IMPORTANT:Pleasereadthismanualcarefully

beforebeginningassemblyofthisproduct.

Keepthismanualforfuturereference.

PRODUCT NO.

PRODUCT NO. 152-2643-6

5-LIGHT CHANDELIER

TAVIO

We believe in the power of décor and its

ability to make up the fabric of your home.

That’s why CANVAS™ collections draw

inspiration from Canadians and the way

they live.

From on-trend furniture pieces to holiday

décor and all your outdoor living essentials,

CANVAS™ makes it easy to refresh your space

to reflect your unique style and the way you

live every day.

We would love to hear from you and welcome

your thoughtful feedback. Visit our website at

canadiantire.ca to tell us about your

experience, and share your photos with us

using #myCANVASstyle.

Show us how you bring CANVAS™ products

to life. We can’t wait to see!

WARNING! CONSULT A QUALIFIED ELECTRICIAN TO ENSURE

CORRECT BRANCH CIRCUIT CONDUCTOR.

TABLE OF CONTENTS

CLEANING: Before cleaning your fixture, turn off the switch or power source.

Wipe the fixture with a soft, damp cloth.

IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY.

TOOLS REQUIRED

READ INSTRUCTIONS AND REVIEW ALL DIAGRAMS BEFORE

INSTALLING FIXTURE. GENERAL INSTRUCTIONS:

1. All electrical connections must be made in accordance with local

codes, ordinances and the Canadian Electrical Code.

2. These fixtures should be mounted on an electrical outlet box. The box must

be directly supported by the building structure.

3. Turn off the circuit breaker or remove the appropriate fuse to disconnect

power source before installing fixture.

4. Turning the light switch off to cut the power is not sufficient to prevent

electric shock. When in doubt about the safety of any electrical installation or

repair, consult a qualified electrician.

TAVIO

Tools Required 3

Parts List 4

Hardware List 5

Exploded Parts 6

Before You Begin Assembly 7

Electrical Installation 8

Step-by-step Guide 9

Technical Data 17

Assembly Troubleshooting 18

Product Troubleshooting 18

Caring for Your Item 18

Warranty 19

Ladder Safety

Goggles

Electrical

Tape

No. 2 Cross-head

Screwdriver Wire

Cutter

Wire

Stripper

Flathead

Screwdriver Insulated

Pliers

Needle

Nose Pliers

3

ITEM DESCRIPTION THUMBNAIL QUANTITY

1

3

2

PARTS LIST

Canopy 1

Main fixture body 1

Top loop 1

TAVIO4

HARDWARE LIST

A

C

E

B

D

F

ITEM DESCRIPTION THUMBNAIL QUANTITY

G

H

I

J

Threaded ring 1

Wire nut 3

Threaded rod 1

Hex nut 2

Mounting screw 2

Mounting bracket 1

1

TAVIO

Chain

Chain link connector 2

Screw collar loop 1

5

60W (max.) ST19 bulb base

E26 (sold separately)

EXPLODED PARTS

TAVIO

3

6

(sold separately)

5 X

J

A

1

I

2X

H

G

2

READ EACH STEP CAREFULLY

Make sure you understand each step. If you have any questions,

contact CANVAS™ customer service at 1-888-670-6684 (toll-free).

MAKE SURE ALL PARTS ARE PRESENT

Compare all pieces to the parts and hardware lists, and make sure

you have all tools required for assembly.

ASSEMBLE IN A CLEARED AREA

Place all parts from the box on the floor in front of you on a clean,

dry, level surface to protect the product as it is being built.

REMOVE PACKAGING MATERIALS

Place packing materials back in the box. Do not dispose of

packaging materials until assembly is complete.

BEFORE YOU BEGIN ASSEMBLY

TAVIO 7

STEP 1

Place the wall switch to the “OFF” position.

WARNING! CONSULT A QUALIFIED ELECTRICIAN TO ENSURE

CORRECT BRANCH CIRCUIT CONDUCTOR.

•Place either the main (Master) switch to

the “OFF” position, cutting off power to

your entire home, OR turn off the

individual switch that provides power to

where the fixture will be installed.

•Place either the main (Master) switch to

the “OFF” position, cutting off power to

your entire home, OR unscrew the fuse

that provides power to where the fixture

will be installed.

NOTE: Shutting off a wall switch that

controls the light is not sufficient to

prevent electric shock.

STEP 2

Depending on which type of fuse box you have in your home:

ELECTRICAL INSTALLATION

TAVIO8

STEP-BY-STEP GUIDE

STEP 1

Thread two hex nuts Bonto the

threaded rod Eto the midpoint.

Thread the threaded rod Ein

through the centre hole of the

mounting bracket F

approximately 1/3 of the way.

Do not tighten the hex nuts B.

Pull the supply wires out from

the outlet box.

Attach the mounting bracket F

to the outlet box by feeding the

mounting screws Dthrough the

slots of the mounting bracket F

and tightening them into the

mounting holes of the outlet box.

9TAVIO

D

E

F

B

DX2 EX1 FX1BX2

STEP-BY-STEP GUIDE

Thread the screw collar loop I8 to 9 turns

onto the bottom end of the threaded rod

E.

Tighten the bottom hex nut Bagainst

screw collar loop I.

Place the canopy 1over the outlet box.

Turn the screw collar loop Iuntil the

midpoint of the outer threads of the screw

collar loop Ialign with the bottom surface

of the canopy 1.

Remove the canopy 1and tighten the top

hex nut Bagainst the mounting bracket F.

TAVIO

STEP 2

IX11X1

10

I

1

E

B

F

STEP-BY-STEP GUIDE

Separate the arms on the main fixture body 3 evenly

around the centre.

Thread the top loop 2onto the top of the main fixture

body 3.

Attach the chain Gto the top loop 2using the chain

link connector H.

Raise the chain Gand the main fixture body 3up to

the outlet box to determine the desired length needed

for installation.

Identify the chain link that needs to be opened to

remove the excess chain.

Recommendation: Lay the main fixture body 3on a

flat surface.

Open the chain link using two pairs of pliers.

Remove and discard the excess chain.

TAVIO

STEP 3

3X1 GX1 HX22X1

G

H

3

2

11

STEP-BY-STEP GUIDE

Slide the threaded ring Aonto the chain

Gfollowed by the canopy 1.

Hook a chain link connector Honto the

top link of the chain G.

Raise the chain link connector Halong

with the chain Gand the main fixture

body 3up to the ceiling and hook it onto

the screw collar loop I.

TAVIO

STEP 4

AX1

STEP-BY-STEP GUIDE

12

I

H

G

1

A

3

H

G

1

A

STEP-BY-STEP GUIDE

TAVIO

STEP 5

Thread the cord and fixture ground wire

through every other link in the chain G.

Feed the cord and fixture ground wire

into the centre hole of the screw collar

loop I, through the threaded rod E, and

then out of the outlet box.

Continue feeding the cord and fixture

ground wire until there is no slack

remaining.

Cut off any excess cord and fixture

ground wire, leaving 6” (15 cm)

extending from the outlet box.

Split and separate the fixture cord and

strip off 3/8” (1 cm) of insulation from

each wire.

STEP-BY-STEP GUIDE

E

I

G

E

I

G

13

WARNING:

Ensure wiring is

not pinched,

pulled, or twisted

during installation.

STEP-BY-STEP GUIDE

TAVIO

STEP 6

CX3

Wrap the fixture ground wire one turn around the green ground screw of the mounting

bracket F, leaving about 4” (10 cm) extra wire extending from the screw.

Tighten the ground screw against the mounting bracket F.

Connect the black supply wire to the smooth fixture wire using a wire nut C.

Connect the white supply wire to the ribbed fixture wire using a wire nut C.

Connect the fixture ground wire and the supply ground wire using a wire nut C.

Wrap all wire connections with electrical tape for a more secure connection.

Carefully tuck all wire connections into the outlet box.

14

NOTE: If you have

electrical questions,

consult your local

electrical code for

approved grounding

methods.

WARNING! MAKE SURE NO

BARE WIRING IS EXPOSED

WHEN THE WIRE

CONNECTORS ARE

INSTALLED (EXCEPT FOR

THE GROUND WIRE).

GROUND

WIRE

BLACK

WIRE

WHITE

WIRE

C

F

STEP-BY-STEP GUIDE

TAVIO

STEP 7

15

Slide the canopy 1up the chain G,

toward the outlet box, and up

against the ceiling surface.

Slide the threaded ring Aup the

chain Gand thread it onto the screw

collar loop Ito secure the canopy 1

flush against the ceiling surface.

1

A

I

G

WARNING:

Ensure wiring is

not pinched,

pulled, or twisted

during installation.

STEP-BY-STEP GUIDE

TAVIO

STEP 8

16

NOTE: Bulb is sold

separately.

NOTE: Do not exceed a

60 watt incandescent

light bulb or SBCFL or

LED equivalent.

JX5

Install an incandescent light

bulb Jor listed SBCFL or

LED equivalent into the

sockets of the main fixture

body 3.

3

J

TECHNICAL DATA

SPECIFICATIONS

ASSEMBLED DIMENSIONS WITHOUT BULBS (W×D×H)

ASSEMBLED WEIGHT

MIN. HANGING HEIGHT

MAX. HANGING HEIGHT

TAVIO

24 × 24 × 27 ̶86 5/8”

61 × 61 × (69 ̶220 cm)

6 lb 3 oz

2.8 kg

27”

69 cm

86 5/8”

220 cm

17

27 ̶86 5/8”

(69 ̶220 cm)

24” (61 cm)

(maximum weight; weight may vary depending on how much chain is used)

HAVING TROUBLE?

LET US HELP YOU!

BEFORE RETURNING

YOUR PRODUCT

CALL US;

WE CAN HELP

If you have questions regarding your product or require

warranty assistance, please call our customer service helpline.

TOLL-FREE:

1-888-670-6684

ASSEMBLY TROUBLESHOOTING

PRODUCT TROUBLESHOOTING

PROBLEM POSSIBLE CAUSES SOLUTION

CARING FOR YOUR ITEM

1

2

3

Make sure the power

supply is on.

The power supply is off.

Do not use any cleaners with chemicals, solvents, or harsh abrasives.

Use a dry or slightly dampened clean cloth and wipe the exterior surface of the

fixture.

To clean the interior of the fixture, disconnect the power to the fixture by turning off

the circuit breaker or by removing the fuse at the fuse box, and then use a slightly

dampened clean cloth to wipe the interior surface of the fixture.

TAVIO

The light will not turn on.

Check the wire

connections.

The fixture is wired

incorrectly.

Replace the light bulb.The light bulb is dead.

Test or replace the

switch.

The switch is faulty.

Check the wiring.The fixture is wired

incorrectly.

The fuse blows or the

circuit breaker trips when

the light is turned on.

18

1-YEAR LIMITED WARRANTY*

This CANVAS™ product carries a one (1) year warranty against defects in workmanship and

materials. Trileaf Distribution agrees to replace the defective product free of charge within the

stated warranty period, when returned by the original purchaser with proof of purchase. This

product is not guaranteed against wear or breakage due to misuse and/or abuse.

Made in China

Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8

PRODUCT NO.

WARRANTY INFORMATION

152-2643-6

TAVIO 19

La page est en cours de chargement...

Canvas Tavio 5-Light Le manuel du propriétaire

Canvas Tavio 5-Light Le manuel du propriétaire

Documents connexes

Autres documents