Panasonic HL-CX667S Mode d'emploi

Operating and Installation Instructions

ELECTRIC BUILT-IN OVEN Household Use

Mode d’emploi et notice d’installation

FOUR ENCASTRABLE ÉLECTRIQUE

Usage domestique

Instrucciones de instalación y funcionamiento

HORNO ELÉCTRICO DE PARED Uso doméstico

English Français Español

Operating and Installation Instructions �� EN-1 - 27

Thank you for purchasing a Panasonic appliance.

•

This appliance is intended for household use only.

•

Please read these instructions carefully before attempting to install, operate or service

this appliance.

•

For optimum performance and safety, please read these instructions carefully and follow

safety precautions when using this appliance.

•

Before using this appliance please pay extra attention to “Safety Precautions”

(pages EN-2 - 4).

Keep this Operating and Installation Instructions for future use.

Model No./Nº de modèle/N.º de modelo HL-CX667S

Instrucciones de instalación y funcionamiento �� ES-1 - 27

Gracias por comprar un electrodoméstico Panasonic.

•

Este aparato es solo para uso doméstico.

•

Lea estas instrucciones detenidamente antes de instalar, hacer funcionar o realizar

mantenimiento en este aparato.

•

Para que el funcionamiento y la seguridad sean óptimos, lea estas instrucciones

detenidamente y respete las precauciones de seguridad cuando use este aparato.

•

Antes de usar este aparato, preste mucha atención a las “Precauciones de

seguridad” (páginas ES-2 - 4)�

Conserve estas Instrucciones de instalación y funcionamiento para consultarlas en el futuro.

Mode d’emploi et notice d’installation �� FR-1 - 27

Nous vous remercions d’avoir choisi cet appareil Panasonic.

•

Cet appareil est uniquement prévu pour un usage domestique.

•

Veuillez lire attentivement ces instructions avant d’installer, d’utiliser ou d’effectuer

l’entretien de votre appareil.

•

Pour un meilleur rendement et une sécurité optimale, veuillez lire attentivement ces instructions

et respecter soigneusement les consignes relatives à la sécurité lorsque vous utilisez l’appareil.

•

Avant toute utilisation de cet appareil, veuillez porter une attention particulière aux

« Précautions relatives à la sécurité » (pages FR-2 - 4)

Conservez ce mode d’emploi et la notice d’installation pour consultation ultérieure.

Safety Precautions ��2 - 4

Parts Identification .............................................................................................................5 - 6

• Accessories ......................................................................................................................... 6

Using the Oven ................................................................................................................7 - 16

• Function Setting ..................................................................................................................7

• Before Using the Oven ........................................................................................................ 8

• While Using the Oven .........................................................................................................8

• Operations....................................................................................................................9 - 13

• Rack Placement Warning ..................................................................................................13

• Using the Rotisserie Kit ..............................................................................................13 - 14

• Cooking Advice and Instructions ................................................................................15 - 16

• Tips for Energy Saving ......................................................................................................16

Cleaning and Maintenance ............................................................................................17 - 18

• Cleaning the Oven Door....................................................................................................17

• Cleaning the Inside of the Oven .................................................................................17 - 18

• Bulb Replacement ............................................................................................................. 18

Troubleshooting ....................................................................................................................19

Error Codes ..........................................................................................................................20

Specifications .......................................................................................................................20

For Installer

Installation Instructions ..................................................................................................21 - 27

• Introduction .......................................................................................................................21

• Electrical Connection .................................................................................................21 - 24

• Installing the Oven .....................................................................................................25 - 27

• Securing the Oven to a Cabinet ........................................................................................27

EN-1

English

Tables of Contents

EN-2

Safety Precautions

In order to prevent accidents or injuries to the users, other people, and damage to

property, please follow the instructions below�

■ The following charts indicate the degree of damage caused by wrong operation�

WARNING

Indicate serious injury or death�

CAUTION

Indicate risk of injury or property damage�

■ The symbols are classified and explained as follows�

These symbols indicate

prohibition�

This symbol indicates requirement

that must be followed�

This symbol indicates an action that should be performed carefully�

Make sure to follow these instructions

WARNING

When abnormality/failure occurs,

stop using the unit and turn off

the circuit breaker�

Example of abnormality/failure:

•

Abnormal noise or heat.

•

Abnormal emission of smoke, fire.

The unit must be grounded�

Improper grounding could cause

electric shock.

If the supply cord is damaged,

it must be replaced by the

manufacturer, its service agent

or similarly qualified persons in

order to avoid a hazard�

Ensure that the circuit breaker is

turned off before replacing the

lamp to avoid the possibility of

electric shock�

The means for disconnection

must be incorporated in the fixed

wiring in accordance with the

wiring rules�

This appliance is not intended

for use by persons (including

children) with reduced physical,

sensory or mental capabilities,

or lack of experience and

knowledge, unless they have been

given supervision or instruction

concerning use of the appliance

by a person responsible for

their safety� Children should be

supervised to ensure that they do

not play with the appliance�

During use the appliance

becomes hot� Care should be

taken to avoid touching heating

elements inside the oven�

Accessible parts may become

hot during use� Young children

should be kept away�

Be sure to turn off the circuit

breaker before maintenance,

repair or service�

EN-3

English

WARNING

Do not connect the power

voltage other than 120 V/240 V or

120 V/208 V AC, may cause fire or

electric shock�

The appliance must not be

installed behind a decorative door

in order to avoid overheating�

Do not disassemble the unit for

reconstruction�

Do not discard the packaging

or any part of it, or leave it

unattended� It can constitute a

suffocation hazard for children,

especially the plastic bags�

CAUTION

Installation and servicing must be

carried out by competent persons

in accordance with the regulation

in force�

Before the appliance is operated,

all the protective film applied

must be removed (apart from the

Name Plate)�

Take care that no objects are

stuck in the door of the oven�

The appliance becomes very hot

during use� Suitable heat-proof

gloves should be worn when

handling�

All cooking operations must take

place with the door closed�

When the oven is first switched

on, it may emit an unpleasant

smell� This is due to the bonding

agent used for insulating panels

within the oven� Please heat

up the new empty appliance

with the conventional cooking

function, at 480 °F (250 °C) for

15 - 20 minutes in order to remove

any manufacturing residues� Be

sure to ventilate when performing

this heating� It is normal that there

will be a slight smoke and odors�

Never obstruct the openings and

slits provided for ventilation and

heat release�

Spray cleaner is not to be used

for cleaning�

Do not use harsh abrasive

cleaners or sharp metal scrapers

to clean the oven door glass,

since they can scratch the

surface, which may result in

shattering of the glass�

A steam cleaner is not to be used�

Do not use this appliance for

heating rooms�

Do not rest any weight or sit on

the open door of the appliance�

The Name Plate with the technical

data, serial number and brand

name has been visibly affixed to

the appliance�

DO NOT REMOVE THE NAME

PLATE FOR ANY REASON�

Do not allow residues of sugary

foods (such as jam) to set inside

the oven since they might damage

the enamel lining of the oven�

EN-4

Safety Precautions

■ Note:

Contact the Panasonic service center or authorized dealer for maintenance and repair.

Make sure to follow these instructions

CAUTION

Do not use plastic kitchenware or

containers� The high temperatures

inside the oven could melt the

plastic and damage the appliance�

Do not use sealed tins or

containers in the appliance�

Over pressure may occur inside

the containers during cooking,

creating a danger of explosion�

Do not leave the appliance

unattended during cooking

process where fats or oils could

be released� Fats and oils may

catch fire�

Do not cover the bottom of the

oven with aluminum or tin foil

sheets during cooking and do not

place pans or trays on it to avoid

damage to the enamelled surface�

If the surface is still very hot

during cooking, do not pour water

directly onto the trays� The steam

could cause severe burns and

damage to enamelled surface�

Do not insert pointed metal

objects into any aperture in the

appliance�

Do not modify this appliance�

Do not replace the parts of the

appliance with spare parts other

than authorized Panasonic parts�

Do not put inflammable material

inside the oven; if it is switched

on by accident, it may cause a

fire�

EN-5

English

Parts Identification

Catalytic Cleaning

•

Liners with special enamel coating.

•

During cooking process, grease and fat are absorbed into

the liners and dispersed leaving the oven interior clean and

reducing cooking odors.

Oven Lamp

Removable Rack

Removable Door

Name Plate

Telescopic Extension

Hole to insert the Rotisserie Rod

Control Panel

1� Main Display

2� Clock Set Key

3� Reminder/Delay Key

4� Function Key

5� Minus Key

6� Plus Key

7� Temperature Setting Key

8� Pause/Cancel Key

9� Start Key

EN-6

Parts Identification

Wire Shelf

For roasting and grilling.

Enamel Baking Tray

For cooking large quantities of food such as moist cakes,

pastries, frozen food etc., or for collecting fat/spillage and

meat juices.

Rotisserie Kit

For averaging the speed of the motor and heating the food

evenly.

At the same time, it can guarantee the nutrition of the food.

Removable Rack

The shelf and tray support rails on the right and left sides

of the oven and can be removed when cleaning the oven

walls.

Telescopic Shelf

(50% length expendable rail)

Telescopic pull-out shelf system provides easy and safe

access to the food.

(a) (b)

Screw Pack

a. Screw Cap (2 pieces)

b. Screw (2 pieces)

■ Note:

•

Contact the Panasonic service center or authorized dealer for maintenance and repair.

•

Use original Panasonic accessories only.

Accessories

English

EN-7

English

Using the Oven

Symbol Function description

Oven Lamp

Enables the user to observe the progress of cooking without opening the door.

Defrost

The circulation of air at room temperature enables quicker thawing of frozen

food, (without the use of any heat). It’s a gentle but quick way to speed up the

defrosting time and thawing of ready-made dishes and cream filled product, etc.

Bottom Heat

A concealed element in the bottom of the oven provides a more concentrative

heat to the base of food without browning. This is ideal for slow cooking dishes

such as casseroles, stews, pastries and pizzas where a crispy base is desired.

The temperature can be set within the range of 140 - 250 °F (60 - 120 °C). The

default temperature is 140 °F (60 °C).

Conventional Cooking

The top and bottom elements work together to provide conventional cooking.

The temperature can be set within the range of 120 - 480 °F (50 - 250 °C). The

default temperature is 430 °F (220 °C). Rotisserie operates together with this

function.

Conventional Cooking with Fan

Combination of the fan and both heating elements provides more even heat

penetration, saving up to 30 - 40 % of energy. Dishes are lightly browned on the

outside and still moist inside.

■ Note:

This function is suitable for grilling or roasting big pieces of meat at a higher

temperature. The temperature can be set within the range of 120 - 480 °F

(50 - 250 °C). The default temperature is 430 °F (220 °C).

Double Grilling

The inside radiant element and top element are working. The temperature can

be set within the range of 360 - 470 °F (180 - 240 °C). The default temperature

is 410 °F (210 °C). Rotisserie operates together with this function.

Double Grilling with Fan

The inside radiant element and top element are working with the fan. The

temperature can be set within the range of 360 - 470 °F (180 - 240 °C). The

default temperature is 410 °F (210 °C).

True Convection

An element around the convection fan provides an additional source of heat

for convection style cooking. In the true convection mode, the fan automatically

comes on to improve air circulation within the oven and creates an even heat

for cooking. The temperature can be set within the range of 120 - 470 °F (50 -

240 °C). The default temperature is 360 °F (180 °C).

Radiant Grilling

The inner grill element switches on and off to maintain the temperature. The

temperature can be set within the range of 360 - 470 °F (180 - 240 °C). The

default temperature is 410 °F (210 °C). Rotisserie operates together with this

function.

Function Setting

EN-8

Using the Oven

Before Using the Oven

CAUTION

Before the appliance is operated, all the protective film applied must be

removed (apart from the Name Plate)�

When the oven is first switched on, it may emit an unpleasant smell� This is

due to the bonding agent used for insulating panels within the oven� Please

heat up the new empty appliance with the conventional cooking function,

at 480 °F (250 °C) for 15 - 20 minutes in order to remove any manufacturing

residues� Be sure to ventilate when performing this heating�

It is normal that there will be a slight smoke and odors�

■ Note:

Before the first operation, remove all accessories and clean with soft cloth and mild

detergent.

While Using the Oven

CAUTION

All cooking operations must be carried out with the door fully closed�

Do not cover the bottom of the oven with aluminum or tin foil sheets during

cooking and do not place pans or trays on it to avoid damage to the enamel

coating surface�

■ Note:

The appliance is equipped with a cooling system which comes into operation as soon as

a cooking function starts. The fan causes a steady outflow of air from above the door.

After cooking is finished, the cooling fan will continue to work for 15 minutes or until the

temperature of oven becomes below 160 °F (70 °C).

EN-9

English

Operations

Clock Setting

After connecting the oven to the power supply, the symbol will be visible on

the display�

1. Press

, and the hour figures will flash.

2. Press

or to adjust the hour. (Hour should be within 0 - 23.)

3. Press

, and the minutes will flash.

4. Press

or to adjust the minutes. (Minute should be within 0 - 59.)

5. Press

to finish the clock setting. “ ” in the time display will flash, and the clock is

set.

Function Setting

1. Press to choose the cooking function you require .The related cooking function

will be visible on the display.

2. Press

or to adjust the cooking time. (Time should be within 1 minute -

9 hours. The minute increments are 1 minute between 1 minute and 30 minutes;

5 minutes from 30 minutes to 9 hours.)

3. Press

, then press or to adjust the cooking temperature.

4. Press

to start cooking. It will begin countdown. The corresponding icon,

will be visible on the display, indicating the heating is in progress. The

oven will shutdown automatically if the time reaches

. Beep will sound 5 times,

and the display will change to clock indicating the current time.

5. If step 2 is to be ignored, the default cooking time is 9 hours. (This means the oven

will shutdown automatically after 9 hours.)

■ Note:

•

The oven lamp will be on for all the cooking functions.

•

If is not pressed within 5 minutes after all cooking program has been set, the

display will change to clock indicating current time. This means the cooking program

has been canceled.

•

and functions are not for heating.

•

While cooking is in progress, you can adjust the cooking time by pressing or

, then press . If is not pressed within 5 seconds, the cooking time will revert

back to the original time to continue cooking.

•

While cooking is in progress, you can adjust the cooking temperature by

pressing

, “ ” will be visible on the display. Press or to adjust the cooking

temperature, then press

. If is not pressed within 5 seconds, the cooking

temperature will revert back to the original temperature to continue cooking.

EN-10

Using the Oven

Start/Pause/Cancel Function

1. For every function, press to start operating the function.

2. Press

once to pause the function. To resume the function, press .

3. Press

twice to cancel the function.

Lamp Setting

1. Press once, will be visible on the display.

2. Press

to switch on the lamp. (No heating takes place.)

3. Press

twice to switch off the lamp.

Inquiring for Time

While cooking is in progress or the reminder was set, press to see the current

time�

Child Lock Function

To Lock: Press and hold and simultaneously for approximately 3 seconds,

beep will sound and

will be visible on the display� All controls will be

disabled�

To Unlock: Press and hold

and simultaneously for approximately 3 seconds,

beep will sound and

will go off� All controls are ready for use�

■ Note:

Alternatively to unlock the Child Lock, switch OFF the power supply.

Switching display from °F to °C

The default temperature setting display is °F.

1. Press

3 times. will be visible on the display.

2. Press

.

3. Press

again and hold for approximately 3 seconds.

4.

°C will be visible on the display.

5. The display will change to clock indicating the current time.

Follow the same steps when switching display from °C to °F.

■ Note:

•

Setting will be effective unless the plug is disconnected. Once the circuit breaker is

turned off or power failure occurs, the display setting will return to °F.

•

Press twice when you cancel the procedure after performing step 2. Otherwise, the

oven will start heating and continue for 9 hours.

EN-11

English

Reminder Function

This function allows you to program the oven as a kitchen timer in two cases:

to start cooking at certain time.

that the cooking has completed for your next action.

The countdown time can be set from 1 minute to 9 hours�

■ For case

In standby mode,

1. Press

. and will be visible on the display, will flash.

2. Press

or to set the reminder time.

3. Press

to start. “ ” in the time display will flash, and the reminder time is set. It will

begin to countdown.

■ Note:

•

Beep will sound 10 times to remind you to start cooking after the time reaches .

and will go off, and the display will change to clock indicating current time.

•

During the countdown, you can pause the reminder by pressing once.

To restart, press

.

•

During the countdown, you can cancel the reminder by pressing twice.

■ For case

While the cooking is in progress,

1. Press

. and will be visible on the display, will flash.

2. Press

or to set the reminder time.

3. Press

to start the reminder. The display will revert back to cooking display and

will be visible on the display.

■ Note:

•

Beep will sound 10 times to remind you to start next action after the time reaches

. and will go off, and the cooking will continue.

•

You cannot pause or cancel the reminder function once it is set.

Delay Function/End Function

Only when the current time has been set, Delay Function/End Function can be used

for either of 2 cases below:

To delay start of cooking, after setting the end time of cooking and the cooking duration

time. The cooking starts automatically and end at the time pre-programmed.

To start cooking immediately after setting the end cooking time to shutdown the oven

automatically when the cooking is completed.

EN-12

Using the Oven

■ For case

In standby mode,

1. Press

twice, and will be visible on the display.

2. Press

or to set the end hour. (Hour should be within 0 - 23.)

3. Press

again;

4. Press

or to set the end minute. (Minute should be within 0 - 59.)

5. Press

to choose the cooking function you require.

6. Press

or to set the duration of cooking.

7. Press

, then press or to adjust the cooking temperature.

8. Press

to start the Delay Function.

9. The oven will shutdown automatically when the delay timer reaches

. Beep will

sound 5 times, the display will change to clock indicating the current time.

Example: If you place your food (uncooked) in the oven at current time

, and you

want to cook for 1 hour and end the cooking at

,

In steps 2 - 4, set the end time as

,

In step 6, set the cooking time as

.

Result: Cooking will start at

. It will begin to countdown by delay timer.

Eventually, your oven will shutdown automatically at

, with beep sound.

■ For case

In standby mode,

1. Press

twice, and will be visible on the display.

2. Press

or to set the end hour. (Hour should be within 0 - 23.)

3. Press

again;

4. Press

or to set the end minute. (Minute should be within 0 - 59.)

5. Press

to choose the cooking function you require.

6. Press

, then press or to adjust the cooking temperature.

7. Press

to start the End Function.

8. The oven will shutdown automatically when the countdown reaches

. Beep will

sound 5 times, and the display will change to clock indicating the current time.

Example: If you place your food (uncooked) in the oven at current time

, and you

want to cook for 1 hour and end the cooking at

.

In steps 2 - 4, set the end time as

.

Result: Cooking will start at

. It will begin to countdown by delay timer.

Eventually, your oven will shutdown automatically at

, with beep sound.

EN-13

English

Energy-Saving Function

1. In standby mode or Reminder mode, press for approximately 3 seconds, the LED

display will go off entering Energy-Saving mode.

2. Alternatively, if there is no operation within 10 minutes under standby mode, the LED

display will go off entering Energy-Saving mode.

3. Under the Energy-Saving mode, press any key to quit the Energy-Saving mode.

Rack Placement Warning

To ensure the Wire Shelf or Enamel Baking Tray operates safely, correct insertion and

correct placement between the oven rack are necessary.

Alternatively, you can refer to the level numbering which is embedded at front of the oven

when the door is opened. (There are total 5 levels.)

This will ensure that during careful removal of the Wire Shelf or Enamel Baking Tray, hot

food items should not slide out from the back.

CAUTION

Use oven gloves as the

oven and accessories will

be extremely hot�

Using the Rotisserie Kit

When cooking using the Rotisserie function, position the

frame on level 3 of the rack.

Screw the plastic handle onto the rod. Then prepare the

rotisserie with food, using the clip forks provided.

3

EN-14

Using the Oven

Fully insert the end of Rotisserie Rod into the hole

(detail A) which is located in the oven’s cavity.

Make sure the other end of Rotisserie Rod is placed

correctly on the frame (detail B).

A

B

■ Note:

•

During cooking, the handle must not be attached to the Rotisserie Rod.

•

After cooking, attach the handle by screwing it to the end of the Rotisserie Rod. Then,

remove your food (e.g. grilled chicken) from the oven carefully.

1

2

CAUTION

Ensure the plastic handle is removed before closing the door and cooking

with the Rotisserie�

Use oven gloves and take care when using the Rotisserie as the oven and

accessories will be extremely hot�

The Enamel Baking Tray must be inserted at the lowest position of rack before

using the Rotisserie� This is to ensure hot fat drips into the tray below�

After cooking with the Rotisserie, attach the plastic handle, and remove the

Rotisserie Kit from the oven� Unscrew the plastic handle as soon as possible�

The Rotisserie Rod and the Clip Forks are very sharp and great care should be

taken both during their use and their cleaning�

EN-15

English

Cooking Advice and Instructions

General Advice

We recommend preheating the oven before putting the food in. Do not place foods inside

the oven until “°F” or “°C” on the display stops flashing to confirm that the set temperature

has been reached.

For cooking on several levels, we recommend using a fan-assisted function to achieve

uniform cooking at all heights.

In general, it is not possible to shorten the cooking time by increasing the temperature (the

food could be well-done on the outside but undercooked inside).

For best cooking results, we recommend placing a suitable cookware in the center of Wire

Shelf or Enamel Baking Tray.

To prevent excessive amounts of condensation from forming on the internal glass, hot food

should not be left inside the oven for too long after cooking.

Advice for Cooking Meat

It is recommended to preheat and cook at 320 °F (190 °C) or lower to suppress smoke

when cooking foods with a lot of fat.

Cooking time, especially for meat, varies according to the thickness and quality of the food

and to consumer taste.

We recommend using a meat thermometer when roasting meat. (Thermometer is not

supplied with the oven.)

Advice for Cooking Cakes and Biscuits

Use dark metal molds for cakes. They help to absorb the heat better.

The temperature and the cooking duration depend on the quality and consistency of the

mixture.

Check whether the cake is cooked right through. At the end of the cooking time, insert a

metal skewer into the highest point of the cake then take it out. If the batter does not stick to

the metal skewer, the cake is cooked.

If the cake collapses when it comes out of the oven, on the next occasion reduce the set

temperature by about 50 °F (10 °C), selecting a longer cooking time if necessary.

EN-16

Using the Oven

Advice for Defrosting

We recommend positioning frozen foods in a lid-less container.

The food must be defrosted without its wrapping.

Lay out the foodstuff in a single layer to be defrosted evenly, not overlapping.

When defrosting meat, we recommend using Wire Shelf positioned on the level-2 of the

rack with the food on it and Enamel Baking Tray positioned on the level-1. This way, the

liquid from the defrosting food drains away from the food.

The most delicate parts can be covered with aluminum foil.

Advice for Cooking with the Grill and the

Fan-assisted Grill

Using the Grill function, meat can be grilled even when it is put in the cold oven; preheating

is recommended if you wish to change the effect of the cooking.

With the Fan-assisted Grill function, however, we recommend that you preheat the oven

before grilling.

Tips for Energy Saving

To save energy during use of the oven, the following instructions may be followed:

1. All cooking operations must be carried out with the oven door fully closed.

2. Do not open the oven door frequently during cooking in progress, as this will allow

heat to be dispersed from the oven.

3. When the oven is not in use, switch it off completely.

4. Use the “Energy-Saving Function” while cooking is in progress.

5. Keep the inside of the oven clean at all times.

English

EN-17

English

Cleaning and Maintenance

Cleaning the Oven Door

The glass door should always be kept throughly clean� Use absorbent kitchen roll;

remove stubborn dirt with a damp sponge and an ordinary detergent�

•

Do not use a steam cleaner for cleaning the oven.

•

Do not use abrasive or corrosive cleaner for cleaning the glass door.

•

Do not use rough or abrasive material or sharp metal scrapers to clean the oven’s

glass door since they may scratch the surface.

Cleaning the Inside of the Oven

For the best maintenance, clean the oven regularly when it has been cooled down

after each cooking�

•

Take out all removable parts.

•

For easier cleaning, the oven door can be removed.

Removing the Door from Oven

Removable door allows full access to entire

interior of the oven for easier and quicker

maintenance�

•

To remove the door, open the door to the

maximum angle. Then pull the buckle at the door

hinge backward. (Figure 1)

(Total 2 buckles at both sides of the door.)

•

Close the door to an angle approximately 15 °.

Lift up and slowly pull the door out from the oven.

(Figure 2)

•

When cleaning is completed, reverse the above

procedures to return the door to its original

position.

■ Note:

The oven should be operated at the maximum heat

setting for 15 - 20 minutes after use of specific

cleaning detergents to burn off the residues left

inside the oven. During this process, accessible

part may get hotter than usual and children should

be kept away.

15

˚

Figure 1

Figure 2

EN-18

Cleaning and Maintenance

Removing the Rack from Oven

Removing the rack will make it easier to clean the side

wall of the oven�

•

To remove the rack, unscrew 1 piece of screw at the

bottom side of wall using a ‘+’ screwdriver. (Figure 1)

•

Then, lift up the rack to an angle approximately 90 °,

and slowly pull the rack out from the oven. (Figure 2)

•

When cleaning is completed, reverse the above

procedures to return the rack to its original position.

90

Figure 1

Figure 2

Bulb Replacement

The bulb used in the oven lamp is a special bulb that

has high temperature resistance (120 V ~ 25 W)� So,

buying a genuine bulb from an authorized dealer is

necessary�

For replacement, proceed as follows:

1. Turn off the circuit breaker.

2. Unscrew the covering glass in counterclockwise

direction. (Figure 1)

3. Unscrew the bulb in counterclockwise direction and

replace the bulb with a new one of the same type.

(Figure 2)

4. Screw the covering glass in clockwise direction

after bulb replacement is completed.

Figure 1

Figure 2

La page charge ...

Panasonic HL-CX667S Mode d'emploi

Panasonic HL-CX667S Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents