JVC ABT22 - Radio / CD Manuel utilisateur

ENGLISHESPAÑOLFRANÇAIS

CD RECEIVER KD-ABT22

RECEPTOR CON CD KD-ABT22

RÉCEPTEUR CD KD-ABT22

For canceling the display demonstration, see page 5.

Para cancelar la demostración en pantalla, consulte la página 5.

Pour annuler la démonstration des affichages, référez-vous à la page 5.

For installation and connections, refer to the separate manual.

Para la instalación y las conexiones, refiérase al manual separado.

Pour l’installation et les raccordements, se référer au manuel séparé.

INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTIONS

GET0527-001B

[J]

For customer Use:

Enter below the Model

No. and Serial No. which

are located on the top or

bottom of the cabinet. Retain

this information for future

reference.

Model No.

Serial No.

Cover_KD-ABT22[J]ff.indd 1Cover_KD-ABT22[J]ff.indd 1 3/7/08 9:24:52 AM3/7/08 9:24:52 AM

ENGLISH

2

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best

possible performance from the unit.

INFORMATION (For U.S.A.)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

Caution:

Changes or modifications not approved by JVC could void the user’s authority to operate the equipment.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to

qualified service personnel.

3. CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do not stare into beam.

(For Canada) Visible and/or invisible class 1M laser radiation when open. Do not view directly with

optical instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

[European Union only]

This unit is equipped with the steering wheel

remote control function.

• See the Installation/Connection Manual (separate

volume) for connection.

EN02-07_KD-ABT22[J]3.indd 2EN02-07_KD-ABT22[J]3.indd 2 12/11/07 1:43:59 PM12/11/07 1:43:59 PM

ENGLISH

3

How to reset your unit

• Your preset adjustments will also be erased (except the

registered Bluetooth device, see pages 13 and 14).

How to forcibly eject a disc

“Please Eject” appears on the display.

• Be careful not to drop the disc when it ejects.

• If this does not work, reset your unit.

For safety...

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold

weather, wait until the temperature in the car becomes

normal before operating the unit.

CONTENTS

INTRODUCTIONS

Preparation .................................................. 5

OPERATIONS

Basic operations ........................................... 6

• Using the control panel ............................... 6

• Using the remote controller (RM-RK50) ...... 7

Listening to the radio ................................... 8

Disc operations ............................................. 10

Listening to the USB device .......................... 12

Using the Bluetooth

® devices ....................... 13

• Using the Bluetooth cellular phone ............ 15

• Using the Bluetooth audio player ............... 18

EXTERNAL DEVICES

Listening to the HD Radio ™ Broadcast ......... 19

Listening to the CD changer ......................... 20

Listening to the satellite radio ..................... 21

Listening to the iPod .................................... 24

Listening to the other external

components .............................................. 27

SETTINGS

Selecting a preset sound mode .................... 28

General settings — PSM .............................. 31

Bluetooth settings ....................................... 36

Title assignment .......................................... 37

REFERENCES

More about this unit .................................... 38

Troubleshooting ........................................... 43

Maintenance ................................................ 49

Specifications ............................................... 50

EN02-07_KD-ABT22[J]3.indd 3EN02-07_KD-ABT22[J]3.indd 3 12/11/07 1:44:01 PM12/11/07 1:44:01 PM

ENGLISH

4

Detaching the control panel

Attaching the control panel

Caution:

If the temperature inside the car is below 32°F (0°C),

the movement of animation and text scroll will be

halted on the display to prevent the display from being

blurred. appears on the display.

When the temperature increases, and the operating

temperature is resumed, these functions will start

working again.

Warning:

If you need to operate the unit while driving, be sure to

look around carefully or you may be involved in a traffic

accident.

Caution on volume setting:

Digital devices (CD/USB) produce very little noise

compared with other sources. Lower the volume before

playing these digital sources to avoid damaging the

speakers by sudden increase of the output level.

How to use the M MODE and SEL

buttons

If you use M MODE or SEL (select), the display and some

controls (such as the number buttons,

4 /¢ buttons, 5/∞ buttons, and the

control dial) enter the corresponding control mode.

Ex.: When you press number button 1 after pressing

M MODE, to operate the FM tuner.

To use these controls for original functions, press

M MODE again.

• However, pressing SEL makes the unit enters a

different mode.

• Waiting for about 15 seconds without pressing any of

these buttons will automatically cancels the control.

Avoid touching the connectors.

EN02-07_KD-ABT22[J]f.indd 4EN02-07_KD-ABT22[J]f.indd 4 1/2/08 9:47:47 AM1/2/08 9:47:47 AM

ENGLISH

5INTRODUCTIONS

Preparation

Cancel the display demonstration and set the clock

• See also pages 31 and 32.

1

Turn on the power.

2

Enter the PSM settings.

3

Cancel the display demonstrations

Select “Demo,” then “Off.”

Set the clock

Select “Clock Hr” (hour), then adjust the hour.

Select “Clock Min” (minute), then adjust the minute.

Select “24H/12H,” then “24Hours” or “12Hours.”

4

Finish the procedure.

Changing the display information and pattern

When the power is turned off: Check the current clock time

Ex.: When tuner is selected as the source

Source operation display

• If a station has been assigned a title, station

title appears after about 5 seconds.

• To assign a title to a station, see page 37.

Audio level meter display

(see “LevelMeter” on page 31)

EN02-07_KD-ABT22[J]3.indd 5EN02-07_KD-ABT22[J]3.indd 5 12/11/07 1:44:03 PM12/11/07 1:44:03 PM

ENGLISH

6

Basic operations

Using the control panel

• Select the source [Press] .

TUNER *

1

/HD RADIO *

2

= SIRIUS *

2

/XM *

2

=

CD *

2

= USB *

2

(or USB-iPod) *

2

= CD-CH *

2

/

iPod *

2

(or EXT IN) = BT-AUDIO = AUX IN

= (back to the beginning)

9 • Select/adjust the sound mode.

• Enter the PSM settings [Hold].

p • TUNER/SIRIUS/XM: Select preset station/

channel.

• CD/USB/CD-CH: Select folder/track/disc (for CD

changer).

• USB-iPod: Select preset top menu items.

• Bluetooth: Dial preset phone number *

3

.

q • Enter functions mode.

• Bluetooth: Activate Voice Dialing [Hold].

w Change the display information and pattern.

e • TUNER: Select the bands.

• USB-iPod: Start/pause playback.

• BT-AUDIO: Start/pause playback.

*

1

When the HD Radio tuner box is connected, the

built-in tuner of this unit will be disable. To listen

to the HD Radio broadcast, refer to “Listening to the

radio” on page 8. For more features, see pages 19 and

20.

*

2

You cannot select these sources if they are not ready

or not connected.

*

3

For storing preset phone number, see page 17.

1 • TUNER: Select preset station.

• HD RADIO: Select channel.

• SIRIUS/XM: Select category.

• CD/USB/CD-CH: Select folder.

• USB-iPod: Enter the main menu [Hold].

• iPod: Enter the main menu/Pause playback/

Confirm selection.

2 • Turn on the power.

• Turn off the power [Hold].

• Attenuate the sound (if the power is on).

• Bluetooth: Switch the conversation media

during a phone call conversation.

3 Display window

4 • Enter/exit Bluetooth menu.

• Display the dialed list [Hold].

5 Flip down the control panel.

• To eject the disc, flip down the control panel

then press 0 on the unit.

6 AUX (auxiliary) input jack

7 • TUNER/HD RADIO/SIRIUS/XM: Search for

station/channel.

• CD/USB/CD-CH/USB-iPod/iPod: Select track.

• BT-AUDIO: Reverse skip/forward skip.

8 • Volume control [Turn].

EN02-07_KD-ABT22[J]f.indd 6EN02-07_KD-ABT22[J]f.indd 6 1/2/08 9:48:45 AM1/2/08 9:48:45 AM

ENGLISH

7OPERATIONS

Installing the lithium coin battery (CR2025)

Caution:

Battery shall not be exposed to excessive heat such as

sunshine, fire, or the like.

If the effectiveness of the remote controller

decreases, replace the battery.

Before using the remote controller:

• Aim the remote controller directly at the remote

sensor on the unit.

• DO NOT expose the remote sensor to bright light

(direct sunlight or artificial lighting).

Warning (to prevent accidents and damage):

• Do not install any battery other than CR2025 or its

equivalent.

•

Do not leave the remote controller in a place (such as

dashboards) exposed to direct sunlight for a long time.

• Store the battery in a place where children cannot

reach.

• Do not recharge, short, disassemble, heat the battery,

or dispose of it in a fire.

• Do not leave the battery with other metallic

materials.

•

Do not poke the battery with tweezers or similar tools.

• Wrap the battery with tape and insulate when

throwing away or saving it.

Using the remote controller (RM-RK50)

Remote sensor

For USA-California Only:

This product contains a CR Coin Cell Lithium Battery

which contains Perchlorate Material—special

handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

1 • Turns the power on if pressed briefly or

attenuates the sound when the power is on.

• Turns the power off if pressed and held.

• Switches the conversation media during a phone

call conversation.

2 • Changes the FM/AM bands with 5 U.

• Changes the preset stations with D ∞.

• Changes the folder of the MP3/WMA/AAC/WAV.

• While playing an MP3 disc on an

MP3-compatible CD changer:

– Changes the disc if pressed briefly.

– Changes the folder if pressed and held.

• While listening to the satellite (SIRIUS or XM)

radio:

– Changes the categories.

• While listening to an Apple iPod:

Connected to KS-PD100:

– Pauses or resumes playback with D ∞.

– Enters the main menu with 5 U.

(Now 5 U/D ∞/2 R/F 3 work as the menu

selecting buttons.)*

* 5 U : Returns to the previous menu.

D ∞ : Confirms the selection.

Connected to the USB cable:

– Enter the main menu if pressed and held.

– Select the desired menu if pressed briefly.

– Fast skip in every layer of the main menu if

pressed and held.

Continued on the next page

EN02-07_KD-ABT22[J]f.indd 7EN02-07_KD-ABT22[J]f.indd 7 1/2/08 3:12:47 PM1/2/08 3:12:47 PM

ENGLISH

8

Listening to the radio

1

Select “TUNER.”

2

Select the bands.

3

Search for a station to listen—Auto Search.

Manual Search: Hold either one of the buttons until “M” lights up on the display, then

press it repeatedly.

• When receiving an FM stereo broadcast with sufficient signal strength, lights up

on the display.

3 Adjusts the volume level.

4 Selects the sound mode (iEQ: intelligent equalizer).

5 Selects the source.

6 For Bluetooth cellular phone:

– Answers calls if pressed briefly.

– Rejects calls if pressed and held.

– Holds calls if pressed briefly during phone call

conversation.

7 • Searches for stations if pressed briefly.

• Fast-forwards or reverses the track if pressed and

held.

• Changes the tracks if pressed briefly.

• While listening to the satellite (SIRIUS or XM)

radio:

– Changes the channels if pressed briefly.

3 Exit from the setting.

– Changes the channels rapidly if pressed and

held.

• While listening to an iPod (in menu selecting

mode):

Connected to KS-PD100:

– Selects an item if pressed briefly. (Then, press

D

∞ to confirm the selection.)

– Skips 10 items at a time if pressed and held.

Connected to the USB cable:

– By holding F 3, you can start play back the

selected item directly.

– By holding R 2, you can go back to the main

display.

• Reverse skip/forward skip for Bluetooth audio.

When an FM stereo broadcast is

hard to receive

1

2

Reception improves, but stereo effect will be lost.

• lights up on the display.

EN08-17_KD-ABT22[J]ff.indd 8EN08-17_KD-ABT22[J]ff.indd 8 1/31/08 11:38:53 AM1/31/08 11:38:53 AM

ENGLISH

9OPERATIONS

FM station automatic presetting

— SSM (Strong-station Sequential

Memory)

You can preset up to six stations for each band.

1 While listening to a station...

2

3

Local FM stations with the strongest signals are

searched and stored automatically in the selected

FM band.

• If an HD Radio tuner box is connected, you

can also search and store the AM station

automatically.

Manual presetting

Ex.: Storing FM station of 92.5 MHz into preset number

4 of the FM1 band.

Using the number buttons

1

2

3

Using the Preset Station list

• When is shown on the display, you can

move back to the previous screen by pressing number

button 3.

1 Follow steps 1 and 2 of “Using the number

buttons” on the left column.

• By holding

5 / ∞, the Preset Station List will

also appear (go to step 4).

2

3

Display the Preset Station List.

4 Select the preset number you want to store

into.

• You can move to the lists of the other FM bands

by pressing number button 5 ( ) or

6 ( ) repeatedly.

5 Store the station.

Preset number flashes for a while.

Continued on the next page

EN08-17_KD-ABT22[J]3.indd 9EN08-17_KD-ABT22[J]3.indd 9 12/11/07 1:43:38 PM12/11/07 1:43:38 PM

ENGLISH

10

Prohibiting disc ejection

To cancel the prohibition, repeat the same

procedure.

Listening to the preset station on the Preset Station List

1 Display the Preset Station List, then select the preset station you want to listen to.

2 Change to the selected station.

*

1

Disc operations

All tracks will be played repeatedly until you change the

source or eject the disc.

To stop play and eject the disc

• Press SOURCE to listen to another playback source.

Pressing (or holding) the following buttons allows you

to...

[Press] Select track

[Hold] Reverse/fast-forward

track

MP3/WMA/AAC: Select folder

(Number buttons) *

2

Locate particular folder *

3

(for MP3/WMA/AAC) or track

directly

*

1

By holding either one of the buttons, you can display

the Folder List (see page 11).

*

2

Press to select number 1 to 6; hold to select number

7 to 12.

*

3

It is required that folders be assigned with 2-digit

numbers at the beginning of their folder names—01,

02, 03, and so on.

EN08-17_KD-ABT22[J]3.indd 10EN08-17_KD-ABT22[J]3.indd 10 12/11/07 1:43:39 PM12/11/07 1:43:39 PM

ENGLISH

11OPERATIONS

4 Select an item.

• You can move to the other lists by pressing

number button 5 (

) or 6 ( )

repeatedly.

5 Change to the selected item.

A If File List is selected

The list disappears and playback

starts.

B If Folder List is selected

• If the current folder is selected, File List

appears, then repeat steps 4 and 5 A to

start playback.

• If another folder is selected, playback starts

from the 1st file of the selected folder.

Ex.: When “File” is selected in step 3

After pressing M MODE, press the following buttons to...

Skip 10 tracks

MP3/WMA/AAC: Within the same

folder

Repeat Track:

Repeat current track

Repeat Folder:

MP3/WMA/AAC: Repeat current

folder

Random Folder:

MP3/WMA/AAC: Randomly play all

tracks of current folder, then tracks

of next folders

Random Disc:

Randomly play all tracks

• You can also cancel the playback mode by selecting

“Off” or press number button 4 (

).

Selecting a folder/track on the list

(only for MP3/WMA/AAC file)

• When is shown on the display, you can

move back to the previous screen by pressing number

button 3.

1

2

Select “LIST.”

3 Select the list type.

EN08-17_KD-ABT22[J]ff.indd 11EN08-17_KD-ABT22[J]ff.indd 11 1/31/08 11:40:12 AM1/31/08 11:40:12 AM

ENGLISH

12

If a USB device has been attached...

Playback starts from where it has

been stopped previously.

• If a different USB device is

currently attached, playback starts

from the beginning.

To stop play and detach the USB device

Straightly pull it out from the unit.

• Press SOURCE to listen to another playback source.

You can operate the USB device in the same way you

operate the files on a disc. (See pages 10 and 11.)

• You can listen to WAV files by following the MP3/

WMA/AAC files operations listed on pages 10 and 11.

Cautions:

• Avoid using the USB device if it might hinder your

safety driving.

• Do not pull out and attach the USB device repeatedly

while “Reading” is shown on the display.

• Do not start the car engine if a USB device is

connected.

• This unit may not be able to play the files depending

on the type of USB device.

• Operation and power supply may not work as

intended for some USB devices.

• You cannot connect a computer to the USB cable

from the rear of the unit.

• Make sure all important data has been backed up to

avoid losing the data.

• Do not leave a USB device in the car, expose to direct

sunlight, or high temperature to avoid deformation

or cause damages to the device.

• Some USB devices may not work immediately after

you turn on the power.

• For more details about USB operations, see page 40.

Listening to the USB device

You can connect a USB mass storage class device such as a USB memory, Digital Audio Player *

1

, portable HDD, etc. to

the unit.

• You can also connect an Apple iPod to the USB cable from the rear of the unit. For details of the operations, see

pages 24 – 26.

This unit can play MP3/WMA/WMA-DRM10 *

1

/AAC *

2

/WAV tracks stored in a USB device.

*

1

You can connect both MTP (Media Transfer Protocol) devices and USB mass storage class devices. See also page 40.

*

2

This unit can play back AAC files encoded using iTunes. This unit cannot play back FairPlay-encrypted files.

All tracks will be played repeatedly until you change the source or detach the USB device.

USB cable from the rear of the unit.

USB memory

EN08-17_KD-ABT22[J]5.indd 12EN08-17_KD-ABT22[J]5.indd 12 12/18/07 9:28:07 AM12/18/07 9:28:07 AM

ENGLISH

13OPERATIONS

Using the Bluetooth ® devices

Bluetooth is a short-range wireless radio

communication technology for the mobile device such

as mobile phones, portable PCs, and other devices. The

Bluetooth devices can be connected without cables and

communicate with each other.

• Refer to the list (included in the box) to see the

countries where you may use the Bluetooth®

function.

Bluetooth profile

This unit supports the following Bluetooth profiles;

HFP (Hands-Free Profile) 1.5

OPP (Object Push Profile) 1.1

A2DP (Advanced Audio Distribution Profile) 1.2

AVRCP (Audio/Video Remote Control Profile) 1.3

Features

You can operate Bluetooth devices through the unit as

follows:

• Receiving a call

• Making a call—from phone book, from call history

(dialed number/received call), by dialing number, by

preset numbers, by voice command

• Informing you of the arrival of a text message

• Play back a Bluetooth audio player

Refer also to the instructions supplied with the

Bluetooth device.

Connecting a Bluetooth device for

the first time

Pairing and PIN code

When you connect a Bluetooth device to the unit

for the first time, make pairing between the unit

and the device. Pairing allows Bluetooth devices to

communicate with each other.

To make pairing, you may need to enter the PIN

(Personal Identification Number) code of your Bluetooth

device you want to connect.

• Once the connection is established, it is registered in

the unit even if you reset the unit. Up to five devices

can be registered in total.

• Only one device for Bluetooth phone and one for

Bluetooth audio can be connected at a time.

• To use the Bluetooth function, you need to turn on

Bluetooth function of the device.

Preparation: Operate the device to turn on its

Bluetooth function.

• When

is shown on the display, you can

move back to the previous screen by pressing number

button 3.

1 While listening to a source...

2 Select “Device.”

3 Select “New Pairing.”

Continued on the next page

EN08-17_KD-ABT22[J]f.indd 13EN08-17_KD-ABT22[J]f.indd 13 1/2/08 9:51:17 AM1/2/08 9:51:17 AM

ENGLISH

14

4 Enter a PIN (Personal Identification Number)

code to the unit.

• You can enter any number you like (1-digit to

16-digit number). [Initial: 0000]

• To enter a PIN code less than 4-digit, firstly

delete the initial PIN code (0000) by pressing

number button 5 (

) .

* Some devices have their own PIN code. Enter the

specified PIN code to the unit.

1 Move to the next (or previous) number

position.

2 Select a number.

3 Repeat steps 1 and 2 until you finish

entering a PIN code.

4 Confirm the entry.

5 Operate the target Bluetooth device, (while

“Open...” is flashing on the display).

On the device to be connected, enter the same PIN

code you have just entered for this unit.

“Connecting...” flashes, then “Pairing Ok” or

“Connected [Device Name]” appears on the display

when the connection is established. Now you can

use the device through the unit.

appears when the connection is established.

The device remains registered even after you

disconnect the device. Use “Cnnct Phone“ or

“Cnnct Audio” (or activate “Auto Cnnct”) to

connect the same device from next time on. (See the

following and page 36.)

Deleting a registered device

Perform steps 1 and 2 on page 13, then...

1 Select “Del Pairing.”

2 Select a device you want to delete.

3 Delete the selection.

• Press number button 3 to select “No” or return to

step 1.

Connecting a registered device

Perform steps 1 and 2 on page 13, then...

1 Select “Cnnct Phone” or “Cnnct Audio.”

2 Select a device you want.

“Connecting...” flashes, then “Connected (and

device name)” appears on the display when the

device is connected.

EN08-17_KD-ABT22[J]f.indd 14EN08-17_KD-ABT22[J]f.indd 14 1/2/08 9:51:19 AM1/2/08 9:51:19 AM

ENGLISH

15OPERATIONS

Continued on the next page

You can set the unit to connect the Bluetooth device

automatically when the unit is turned on. (See

“Auto Cnnct” on page 36.)

Disconnecting a device

Perform steps 1 and 2 on page 13, then...

Select “Discn Phone” or “Discn Audio.”

“Disconnecting...” flashes, then “Disconnected (and

device name)” appears on the display when the device

is disconnected.

Using the Bluetooth cellular

phone

Making a call

You can make hands-free calls using the unit.

The sounds comes out from the connected speakers.

• When appears on the display, you can

move back to the previous display by pressing

number button 3.

1

2 Select “Call.”

3 Select the method to make a call.

• Dialed *: Shows the list of the phone numbers

you have dialed. Go to the following step.

• Received *: Shows the list of the received calls.

Go to the following step.

• Phonebook: Shows the name/phone number of

the phone book of the unit. Go to the following

step. To copy the phone book memory, see page

17.

• Preset: Shows the list of preset numbers. Go to

the following step. To preset numbers, see page

17.

• Dial Number: Shows the phone number entry

screen. See “How to enter phone number” on

page 16.

• Voice Dial (Only accessible when the connected

cellular phone has the voice recognition system):

Speak the name (registered words) you want to

call.

* Displays only when the dialed or received number

is made through the unit.

4 Select the name/phone number/preset

number you want to call.

• When the sound is stopped or interrupted during the

use of a Bluetooth device, turn off, then turn on the

unit.

– If the sound is not yet restored, connect the device

again. (See “Connecting a registered device” on

page 14.)

The built-in microphone is

behind this corner of the unit.

EN08-17_KD-ABT22[J]f.indd 15EN08-17_KD-ABT22[J]f.indd 15 1/2/08 9:51:19 AM1/2/08 9:51:19 AM

ENGLISH

16

When a call comes in....

The source is automatically changed to “Bluetooth.”

• Phone number appears (if acquired).

When “Auto Answer” is activated....

The unit answers the incoming calls automatically, see

page 36.

• When “Auto Answer” is deactivated, press any

button (except

/control dial) to answer the

incoming call.

• You can adjust the microphone volume level (see

page 36).

To end the call or reject an incoming call

Hold any button (except /control dial).

• When “Auto Answer” is set to “Reject,” the unit

rejects any incoming calls.

Answering a waiting call

If your cellular phone is equipped with the call waiting

function, you can put the current call on hold and

answer the waiting call.

Press any button (except /control dial).

• To restore the on-hold call, press any button (except

/control dial) again.

• When you end one call, you can connect to the other.

When a text message comes in....

If the cellular phone is compatible with Text Message

and “MSG Notice” is set to “On” (see page 36), the unit

rings and “Received Message” appears on the display to

inform you of the message arrival.

• You cannot edit or send a message through the unit.

How to enter phone number

How to delete phone number

1

2 Select “Call.”

3 Display the list of phone numbers using one

of the dialing method (see step 3 of “Making

a call” on page 15).

4 Select the name/phone number you want to

delete.

5 Delete the selection.

• Press number button 6 ( ) to delete all

the listed numbers in step 3.

Select a number.

Move the entry position.

Confirm the entry.

EN08-17_KD-ABT22[J]f.indd 16EN08-17_KD-ABT22[J]f.indd 16 1/2/08 9:51:20 AM1/2/08 9:51:20 AM

ENGLISH

17OPERATIONS

How to copy phone book

You can copy the phone book memory of a cellular

phone into the unit.

• When is shown on the display, you can

move back to the previous screen by pressing number

button 3.

1

2 Select “Settings.”

3 Select “PhoneBook.”

4 Enter the PIN code both for this unit and

Bluetooth phone.

• See step 4 of page 14.

5

Operate the target cellular phone. (While

“Receiving 00/50” appears on the display.) Enter

the same PIN code (as entered in step 4) on the

cellular phone, then transfer the phone book

memory to the unit. (Refer to the Instructions

manual supplied with your cellular phone.)

Presetting the phone number

You can preset up to six phone numbers.

• When is shown on the display, you can

move back to the previous screen by pressing number

button 3.

1 Display the phone number you want to

preset by using one of the “Call” items.

2 Select a phone number.

You can also enter a new phone

number (see also “How to enter

phone number” on page 16) to store.

3 Select a preset number to store.

To call a preset number

While in Bluetooth audio....

• You can also call a preset number using “Preset” of

the “Call” items (see page 15).

Switching conversation media (the unit/

cellular phone)

During a phone call conversation....

Then, continue your conversation

using the other media.

• Operations may be different according to the

connected Bluetooth device.

Continued on the next page

EN08-17_KD-ABT22[J]ff.indd 17EN08-17_KD-ABT22[J]ff.indd 17 1/31/08 11:41:25 AM1/31/08 11:41:25 AM

ENGLISH

18 OPERATIONS

Using the Bluetooth audio player

• Operations and display indications differ depending on their availability on the connected audio player.

Select “BT-AUDIO.”

If playback does not start automatically, operate the Bluetooth audio player to start playback.

[Press] Reverse skip/forward skip

[Hold] Reverse search/forward

search

Select group/folder

Start/pause playback

• Refer also to pages 14 and 15 for connecting/

disconnecting/deleting a registered device.

Bluetooth Information:

If you wish to receive more information about

Bluetooth, visit the following JVC web site: <http://

www.jvc-victor.co.jp/english/car/>.

After pressing M MODE, press the following buttons to...

Repeat Track:

Repeat current track

Repeat All:

Repeat all tracks

Repeat Group:

Repeat all tracks of current group

Random All:

Randomly play all tracks

Random Group:

Randomly play all tracks of the

current group

• You can also cancel the playback mode by selecting

“Off.”

EN18-23_KD-ABT22[J]ff.indd 18EN18-23_KD-ABT22[J]ff.indd 18 1/31/08 11:42:39 AM1/31/08 11:42:39 AM

ENGLISH

19

EXTERNAL DEVICES

Searching for HD Radio stations

only

1

2

Changing HD Radio reception

mode

While receiving an HD Radio broadcast, the unit tunes

to digital or analog audio automatically due to the

receiving condition.

1 While listening to an HD Radio station...

Continued on the next page

Listening to the HD Radio ™ Broadcast

Before operating, connect HD Radio tuner box, KT-HD300 (separately purchased) to the CD changer jack on the

rear of the unit.

What is HD Radio Technology?

HD Radio Technology can deliver high-quality digital sound—AM digital will have FM-like quality (in stereo) and FM

digital will have CD-like quality—with static-free and clear reception. Furthermore, stations can offer text and data,

such as artist names and song titles.

• When the HD Radio tuner box is connected, it can also receive conventional analog broadcasts.

• Many HD Radio stations also offer more than one channel of programming. This service is called multicasting.

• To find HD Radio stations in your area, visit www.hdradio.com <http://www.hdradio.com/>.

Refer also to pages 8 – 10 for basic radio operations.

When receiving an HD Radio

station...

When receiving HD Radio multicast

channels...

Select your desired channel.

Station Call Sign appears.

Channel numberFirst four letters of Call Sign

EN18-23_KD-ABT22[J]4.indd 19EN18-23_KD-ABT22[J]4.indd 19 12/14/07 5:01:28 PM12/14/07 5:01:28 PM

ENGLISH

20

2

Auto: [Initial] Switch between digital and

analog audio automatically

Digital: Tuning to digital audio only

Analog: Tuning to analog audio only

[Lights up] When holding the digital reception

[Flashes] When holding the analog reception

Listening to the CD changer

It is recommended to use a JVC MP3-compatible CD changer with your unit. You can connect a CD changer to the

CD changer jack on the rear of the unit.

• You can only play conventional CDs (including CD Text) and MP3 discs.

Preparation: Make sure “Changer” is selected for the external input setting, see page 33.

1

Select “CD-CH.”

2

Select a disc to start playing.

[Press] For selecting disc number 1 – 6.

[Hold] For selecting disc number 7 – 12.

[Press] Select track

[Hold] Reverse/fast-forward track

MP3: Select folders

* By holding either one of the buttons, you can display

the Disc List (see page 11).

*

• If no sound can be heard from the selected setting,

change the setting to “Analog” or “Digital.”

• The setting automatically changes to “Auto” if you

tuned in to or change to another station, or if you

turned off the power.

• This setting cannot take effect for the conventional

FM/AM stations.

• If the radio station forces the reception mode to

digital or analog, the DIGI or ANA indicator lights up.

To select a disc/folder/track on the list

See “Selecting a folder/track on the list (only for MP3/

WMA/AAC file)” on page 11.

Select “Disc” in step 3 to display the Disc List of the CD

changer.

EN18-23_KD-ABT22[J]4.indd 20EN18-23_KD-ABT22[J]4.indd 20 12/14/07 5:01:30 PM12/14/07 5:01:30 PM

La page est en cours de chargement...

JVC ABT22 - Radio / CD Manuel utilisateur

Ce manuel convient également à

JVC ABT22 - Radio / CD Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents