Harris SG5300-800 Quick Manual

Taper
Quick Manual
SG5300 Data Modem Quick Guide
14221-6100-1000
Rev. A, Sep/13
The Harris SG5300 is an ideal fixed-point, wireless data modem to help monitor and manage remote devices
operating in the 800 MHz and 900 MHz frequency bands. The SG5300 can be mounted indoors or in a
weatherproof enclosure. Utilizing the coverage of the OpenSky network, the SG5300 provides for data
communication to areas that were previously hard or expensive to retrieve data from.
Physical Characteristics:
Power Requirements: +9 to +57 Vdc
Power Consumption:
9.6 Watt Transmit
2.5 Watt Receive
<3 Watt Average Power at
95/5
Size (H x W x D): 1.5 × 3.9 × 7.8 in
(3.9 × 10 × 19.8 cm)
Weight: 1.6 lbs (0.7 kg)
(less mounting hardware)
System Interfaces:
Ethernet - The SG5300 Ethernet interface is used for
connecting to an RTU.
Connector Type: RJ45
Electrical Protocol: 10/100 BaseT
Data Format: Ethernet IEEE 802.3
Serial - The SG5300 serial interface is for data using
SLIP, PPP or DNP protocols.
Connector Type: 9-pin D Receptacle
Electrical Protocol: EIA/TIA-232 Full Duplex
Data Format: 8 bits/character, 1 start bit,
1 stop bit
UNPACKING EQUIPMENT
The SG5300 data Modem equipment may be shipped
in separate transit packages. Any associated cabling
and accessories for each unit may also be shipped in
separate containers. Models meeting the Class I,
Division 2 non-incendive ratings include a Serial Port
Protective Cover which must be installed when no
serial cable is connected to the unit.
When unpacking the equipment, check the contents
against the packing list. Contact your Harris
representative and the carrier if any discrepancies are
noted.
ITEMS INCLUDED
The following items are included in the SG5300 Data
Modem package:
RU-019026-800 Radio Unit, Data Only,
SG5300, 800 MHz
or
RU-019026-900 Radio Unit, Data Only,
SG5300, 900 MHz
Public Safety and Professional Communications | www.pspc.harris.com
221 Jefferson Ridge Parkway | Lynchburg, VA USA 24501 | 1-800-528-7711
REGULATORY APPROVALS
Transmitter
The transmitting device listed below has been tested and meets the following regulatory requirements:
MODEL DESCRIPTION
FCC ID
(PART 90)
INDUSTRY CANADA
(RSS-119)
SG5300-800 RU-019026-800 Radio Unit OWDTR-0063-E 3636B-0063
SG5300-900 RU-019026-900 Radio Unit OWDTR-0064-E 3636B-0064
For more detailed Installation and Configuration instructions, refer to the SG5300 Data Modem Product Manual
MM-018623-001, available online at: http://www.pspc.harris.com.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation.
INDUSTRY CANADA
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Division 2 Non-Incendive Protection
Division 2 Non-Incendive Protection rating is optional for the Harris SG5300-900. When ordered with this
option, the apparatus is suitable for use in hazardous locations as defined by the National Electrical Code (NEC)
as Class I, Division 2, groups A, B, C and D applications. Either the Serial Port Protective Cover or a serial cable
must be installed on the serial port to meet non-incendive ratings. The serial cable or protective cover mounting
screws shall be torqued to a minimum of 3 in-lbs. The RF antenna connector shall be torqued from 15 to 17 in-
lbs.
Always follow all NEC, NFPA and local codes when installing this equipment in hazardous areas.
Knowledgeable personnel, who are familiar with national and local codes, must supervise hazardous area
equipment installations. A readily accessible disconnect device shall be incorporated external to the equipment.
A 1-Amp over-current protection device shall be provided external to the equipment.
WARNING: EXPLOSION HAZARD.
DO NOT DISCONNECT WHILE THE CIRCUIT IS LIVE OR UNLESS THE AREA IS KNOWN
TO BE FREE OF IGNITIBLE CONCENTRATIONS.
The material contained herein is subject to U.S. export approval. No export or re-export is permitted without written approval
from the U.S. Government. Rated: EAR99; in accordance with U.S. Dept. of Commerce regulations 15CFR774, Export
Administration Regulations. The software contained in this device is copyrighted by Harris Corporation. Unpublished
rights are reserved under the copyright laws of the United States.
This product conforms to the European Union WEEE Directive 2002/96/EC. Do not dispose of this product in a
public landfill. Take it to a recycling center at the end of its life.
  • Page 1 1
  • Page 2 2

Harris SG5300-800 Quick Manual

Taper
Quick Manual

dans d''autres langues