Harris XG-15P series Manuel utilisateur

Catégorie
Radios bidirectionnelles
Taper
Manuel utilisateur
Operator’s Manual
14221-1450-2000
Rev. B, November 2015
XG-15P Series
Portable Radios
14221-1450-2000, Rev. B
2
REV
DATE
REASON FOR REVISION
- May/15 Initial release.
A Aug/15 Added VHF split.
B Nov/15 Added UHF split and added CE info.
Harris Corporation, Public Safety and Professional Communications (PSPC) Business continually evaluates its technical publications for
completeness, technical accuracy, and organization. You can assist in this process by submitting your comments and suggestions to the
following:
Harris Corporation fax your comments to: 1-434-455-6851
PSPC Business or
Technical Publications e-mail us at: PSPC
_
TechPubs
@
harris.com
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
ACKNOWLEDGEMENTS
The software contained in this device is copyrighted by Harris Corporation Unpublished rights are reserved under the copyright laws of the
United States.
This device is made under license under one or more of the following US patents: 4,590,473; 4,636,791; 5,148,482; 5,185,796; 5,271,017;
5,377,229; 4,716,407; 4,972,460; 5,502,767; 5,146,497; 5,164,986; 5,185,795; 5,226,084; 5,247,579; ; 5,491,772; 5,517,511; 5,630,011;
5,649,050; 5,701,390; 5,715,365; 5,754,974; 5,826,222; 5,870,405; 6,161,089; and 6,199,037 B1. DVSI claims certain rights, including
patent rights under aforementioned U.S. patents, and under other U.S. and foreign patents and patents pending. Any use of this software or
technology requires a separate written license from DVSI.
CREDITS!
Harris Corporation is a registered trademark and TECHNOLOGY TO CONNECT, INFORM AND PROTECT, ProScan, and Failsoft are
trademarks of Harris Corporation.
RBRC and 1-800-8-BATTERY are registered trademarks of Rechargeable Battery Recycling Corporation.
AMBE is a registered trademark and IMBE, AMBE+, and AMBE+2 are trademarks of Digital Voice Systems, Inc.
TORX is a registered trademark of CAMCAR division of TEXTRON, Inc.
All other product and brand names are trademarks, registered trademarks, or service marks of their respective holders.
NOTICE!
The material contained herein is subject to U.S. export approval. No export or re-export is permitted without written approval from the U.S.
Government. Rated: EAR99; in accordance with U.S. Dept. of Commerce regulations 15CFR774, Export Administration Regulations.
Information and descriptions contained herein are the property of Harris Corporation. Such information and descriptions may not be copied
or reproduced by any means, or disseminated or distributed without the express prior written permission of Harris Corporation, PSPC
Business, 221 Jefferson Ridge Parkway, Lynchburg, VA 24501.
This product conforms to the European Union WEEE Directive 2012/19/EU. Do not dispose of this product in a public landfill. Take it to a
recycling center at the end of its life.
Harris products comply with the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS)
Directive.
The voice coding technology embodied in this product is protected by intellectual property rights including patent rights, copyrights, and
trade secrets of Digital Voice Systems, Inc. The user of this technology is explicitly prohibited from attempting to decompile, reverse
engineer, or disassemble the Object Code, or in any other way convert the Object Code into human-readable form.
Repairs to this equipment should be made only by an authorized service technician or facility designated by the supplier. Changes or
modifications not expressly approved by Harris Corporation could void the user’s authority to operate the equipment.
This manual is published by Harris Corporation, without any warranty. Improvements and changes to this manual necessitated by
typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Harris
Corporation, at any time and without notice. Such changes will be incorporated into new editions of this manual. No part of this manual
may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any
purpose, without the express written permission of Harris Corporation.
Copyright © 2015 Harris Corporation. All rights reserved.
14221-1450-2000, Rev. B
3
This device is a RF transceiver intended for land mobile radio applications. The device may have use restrictions, which require that the
national authority be contacted for any system licensing requirements, frequency use, allowable power level, etc.
14221-1450-2000, Rev. B
4
Česky
[Czech]
Harris Corporation tímto prohlašuje, že tento XG-15P UHF-H (440-512 MHz) je ve
shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice
1999/5/ES.
Dansk
[Danish]
Undertegnede Harris Corporation erklærer herved, at følgende udstyr XG-15P UHF-H
(440-512 MHz) overholder de væsentlige krav og øvrige relevante krav i direktiv
1999/5/EF.
Deutsch
[German]
Hiermit erklärt Harris Corporation, dass sich das Gerät XG-15P UHF-H (440-512 MHz)
in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen
einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Eesti
[Estonian]
Käesolevaga kinnitab Harris Corporation seadme XG-15P UHF-H (440-512 MHz)
vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele
asjakohastele sätetele.
English
Hereby, Harris Corporation declares that this XG-15P UHF-H (440-512 MHz) is in
compliance with the essential requirements and other relevant provisions of Directive
1999/5/EC.
Español
[Spanish]
Por medio de la presente Harris Corporation declara que el XG-15P UHF-H (440-512
MHz) cumple con los requisitos esenciales y cualesquiera otras disposiciones
aplicables o exigibles de la Directiva 1999/5/CE.
Ελληνική
[Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Harris Corporation ΔΗΛΩΝΕΙ ΟΤΙ XG-15P UHF-H (440-512 MHz)
ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ
ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français
[French]
Par la présente Harris Corporation déclare que l'appareil XG-15P UHF-H (440-512
MHz) est conforme aux exigences essentielles et aux autres dispositions pertinentes
de la directive 1999/5/CE.
Italiano
[Italian]
Con la presente Harris Corporation dichiara che questo XG-15P UHF-H (440-512 MHz)
è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla
direttiva 1999/5/CE.
Latviski
[Latvian]
Ar šo Harris Corporation deklarē, XG-15P UHF-H (440-512 MHz) atbilst Direktīvas
1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.
Lietuvių
[Lithuanian]
Šiuo Harris Corporation deklaruoja, kad šis XG-15P UHF-H (440-512 MHz) atitinka
esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Nederlands
[Dutch]
Hierbij verklaart Harris Corporation dat het toestel XG-15P UHF-H (440-512 MHz) in
overeenstemming is met de essentiële eisen en de andere relevante bepalingen van
richtlijn 1999/5/EG.
Malti
[Maltese]
Hawnhekk, Harris Corporation, jiddikjara li dan XG-15P UHF-H (440-512 MHz)
jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-
Dirrettiva 1999/5/EC.
14221-1450-2000, Rev. B
5
Magyar
[Hungarian]
Alulírott, Harris Corporation nyilatkozom, hogy a XG-15P UHF-H (440-512 MHz)
megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb
elõírásainak.
Polski
[Polish]
Niniejszym Harris Corporation oświadcza, że XG-15P UHF-H (440-512 MHz) jest
zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami
Dyrektywy 1999/5/EC.
Português
[Portuguese]
Harris Corporation declara que este XG-15P UHF-H (440-512 MHz) está conforme
com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko
[Slovenian]
Harris Corporation izjavlja, da je ta XG-15P UHF-H (440-512 MHz) v skladu z
bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.
Slovensky
[Slovak]
Harris Corporation týmto vyhlasuje, že XG-15P UHF-H (440-512 MHz) spĺňa základné
požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
Suomi
[Finnish]
Harris Corporation vakuuttaa täten että XG-15P UHF-H (440-512 MHz) tyyppinen laite
on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden
ehtojen mukainen.
Svenska
[Swedish]
Härmed intygar Harris Corporation att denna XG-15P UHF-H (440-512 MHz) står I
överensstämmelse med de väsentliga egenskapskrav och övriga relevanta
bestämmelser som framgår av direktiv 1999/5/EG.
Íslenska
[Icelandic]
Hér með lýsir Harris Corporation yfir því að XG-15P UHF-H (440-512 MHz) er í
samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.
Norsk
[Norwegian]
Harris Corporation erklærer herved at utstyret XG-15P UHF-H (440-512 MHz) er i
samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.
14221-1450-2000, Rev. B
6
TABLE OF CONTENTS
Page
1. REGULATORY AND SAFETY INFORMATION ............................................................................................ 9
1.1 SAFETY CONVENTIONS ........................................................................................................................ 9
1.2 SAFETY TRAINING INFORMATION .................................................................................................... 9
1.2.1 RF Exposure Guidelines ............................................................................................................. 10
1.2.2 Electromagnetic Interference/Compatibility .............................................................................. 11
1.3 REGULATORY APPROVALS ............................................................................................................... 11
1.3.1 Part 15 ........................................................................................................................................ 11
1.3.2 Industry Canada .......................................................................................................................... 11
1.4 OPERATING TIPS .................................................................................................................................. 11
1.5 EFFICIENT RADIO OPERATION ......................................................................................................... 12
1.5.1 Antenna Care and Replacement ................................................................................................. 12
1.5.2 Electronic Devices ...................................................................................................................... 12
1.5.3 Aircraft ....................................................................................................................................... 12
1.5.4 Electric Blasting Caps ................................................................................................................ 12
1.5.5 Potentially Explosive Atmospheres ............................................................................................ 13
2. RENSEIGNEMENTS SUR LA RÉGLEMENTATION ET SÉCURITÉ ....................................................... 14
2.1 CONVENTIONS SUR LES SYMBOLES DE SÉCURITÉ ..................................................................... 14
2.2 RENSEIGNEMENTS SUR LA FORMATION SUR LA SÉCURITÉ .................................................... 14
2.2.1 Directives sur l’exposition aux RF ............................................................................................. 15
2.2.2 Interférence/Compatibilité Électromagnétique ........................................................................... 16
2.3 INTERFÉRENCE DES RADIOFRÉQUENCES ..................................................................................... 16
2.3.1 Partie 15 de la FCC .................................................................................................................... 16
2.3.2 Industrie Canada ......................................................................................................................... 16
2.4 CONSEILS D’UTILISATION ................................................................................................................. 16
2.4.1 Utilisation Efficace de la Radio .................................................................................................. 17
3. CLEANING .......................................................................................................................................................... 19
4. BATTERIES......................................................................................................................................................... 20
4.1 BATTERY CARE/MAINTENANCE ...................................................................................................... 20
4.2 STORING LI-ION BATTERY PACKS ................................................................................................... 20
4.3 CHARGING BATTERY PACKS ............................................................................................................ 20
4.4 CHANGING THE BATTERY PACK ..................................................................................................... 21
4.4.1 Removing the Battery Pack ........................................................................................................ 21
4.4.2 Attaching the Battery Pack ......................................................................................................... 22
4.5 BATTERY DISPOSAL ............................................................................................................................ 22
5. INTRODUCTION ............................................................................................................................................... 23
5.1 WATER RESISTANCE ........................................................................................................................... 24
5.2 UNIVERSAL DEVICE CONNECTOR ................................................................................................... 24
6. OPTIONS AND ACCESSORIES ....................................................................................................................... 25
7. OPERATION ....................................................................................................................................................... 28
7.1 TURNING ON THE RADIO ................................................................................................................... 28
7.2 CONTROLS ............................................................................................................................................. 28
7.2.1 Buttons, Knobs, and Switch ....................................................................................................... 29
7.2.2 Keypad ....................................................................................................................................... 29
7.3 DISPLAY ................................................................................................................................................. 30
7.4 RADIO STATUS ICONS ......................................................................................................................... 31
7.5 TRI-COLOR LED .................................................................................................................................... 31
7.6 RADIO STATUS MESSAGES ................................................................................................................ 32
7.7 ERROR MESSAGES ............................................................................................................................... 32
7.8 ALERT TONES........................................................................................................................................ 33
14221-1450-2000, Rev. B
7
TABLE OF CONTENTS
Page
7.9 VOICE ANNUNCIATION ....................................................................................................................... 33
7.10 SYSTEM/ZONE SELECTION ................................................................................................................. 33
7.11 GROUP/CHANNEL SELECTION ........................................................................................................... 34
7.12 MODIFY SCAN LIST .............................................................................................................................. 34
7.13 MENU ....................................................................................................................................................... 35
7.14 MENU ITEM SELECTION PROCESS .................................................................................................... 35
7.15 BACKLIGHT ON/OFF ............................................................................................................................. 37
7.16 CONTRAST ADJUST .............................................................................................................................. 37
7.17 DECLARING AN EMERGENCY ........................................................................................................... 38
7.18 LOCKING/UNLOCKING KEYPAD ....................................................................................................... 38
7.19 HIGH/LOW POWER ADJUSTMENT ..................................................................................................... 38
7.19.1 Using the Menu Button ............................................................................................................... 38
7.19.2 Using the Pre-Programmed Option Button ................................................................................. 38
7.20 ENCRYPTION .......................................................................................................................................... 38
7.20.1 Displaying the Currently Used Cryptographic Key Number ...................................................... 39
7.20.2 Key Zero ..................................................................................................................................... 39
7.20.3 Receiving an Encrypted Call ....................................................................................................... 39
7.20.4 Transmitting an Encrypted Call .................................................................................................. 39
7.20.5 Emergencies on Encrypted Group ............................................................................................... 40
7.21 SCAN OPERATION ................................................................................................................................. 40
7.21.1 Turning Scan On and Off ............................................................................................................ 40
7.21.2 Add Groups and Channels to a Scan List .................................................................................... 40
7.21.3 Deleting Groups from a Scan List ............................................................................................... 41
7.21.4 Nuisance Delete .......................................................................................................................... 41
7.22 SYSTEM SCAN (P25 TRUNKED) .......................................................................................................... 41
7.22.1 Wide Area System Scanning ....................................................................................................... 41
7.22.2 Priority System Scan ................................................................................................................... 42
7.22.3 ProScan ....................................................................................................................................... 42
7.23 EMERGENCY OPERATION ................................................................................................................... 42
7.23.1 Receiving an Emergency Call ..................................................................................................... 42
7.23.2 Declaring an Emergency Call ..................................................................................................... 43
7.24 MIXED SYSTEM ZONES ....................................................................................................................... 43
7.25 CALLER ID .............................................................................................................................................. 43
7.26 STEALTH MODE .................................................................................................................................... 44
7.26.1 Mixed Zone Scan ........................................................................................................................ 44
7.27 INDIVIDUAL CALLS (P25 MODES) ..................................................................................................... 45
7.27.1 Receiving and Responding to an Individual Call ........................................................................ 45
7.27.2 Sending an Individual Call .......................................................................................................... 46
7.27.3 Call Storage Lists ........................................................................................................................ 47
7.28 TELEPHONE INTERCONNECT CALLS (P25 TRUNKED) ................................................................. 47
7.28.1 Receiving a Telephone Interconnect Call ................................................................................... 47
7.28.2 Sending a Telephone Interconnect Call ....................................................................................... 48
7.28.3 Dual-Tone Multi-Frequency: Overdial ....................................................................................... 48
7.29 PRE-STORING INDIVIDUAL AND TELEPHONE INTERCONNECT CALLS FROM THE
KEYPAD ................................................................................................................................................... 49
7.30 STATUS/MESSAGE OPERATION (P25 MODES) ................................................................................ 50
7.30.1 Status Operation .......................................................................................................................... 50
7.30.2 Message Operation ...................................................................................................................... 50
7.31 MACRO KEY OPERATION .................................................................................................................... 51
7.32 TYPE 99 OPERATION (ANALOG CONVENTIONAL) ........................................................................ 51
7.32.1 Type 99 with or without Channel Guard ..................................................................................... 51
7.32.2 Resetting Type 99 after a Call ..................................................................................................... 51
7.32.3 Type 99 Disable after PTT .......................................................................................................... 52
14221-1450-2000, Rev. B
8
TABLE OF CONTENTS
Page
7.33 AUDIO PLAYBACK ............................................................................................................................... 52
7.34 RADIO TEXTLINK OPERATION ......................................................................................................... 52
7.34.1 Send TextLink Messages ............................................................................................................ 52
7.34.2 View Received TextLink Messages ........................................................................................... 52
7.34.3 Delete TextLink Messages ......................................................................................................... 53
7.34.4 View the Current Time ............................................................................................................... 53
7.35 VIEW GPS INFORMATION ................................................................................................................... 53
7.36 CONTROL AND STATUS SERVICES .................................................................................................. 53
8. CUSTOMER SERVICE ...................................................................................................................................... 54
8.1 CUSTOMER CARE ................................................................................................................................. 54
8.2 TECHNICAL ASSISTANCE ................................................................................................................... 54
9. BASIC TROUBLESHOOTING ......................................................................................................................... 55
10. WARRANTY ....................................................................................................................................................... 55
FIGURES
Figure 4-1: Removing the Battery Pack .......................................................................................................................... 21
Figure 4-2: Attaching the Battery Pack ........................................................................................................................... 22
Figure 5-1: XG-15P Radio .............................................................................................................................................. 23
Figure 5-2: XG-15P 15-Pin Universal Device Connector............................................................................................... 24
Figure 7-1: Top View...................................................................................................................................................... 28
Figure 7-2: Side View ..................................................................................................................................................... 28
Figure 7-3: XG-15P Keypad ........................................................................................................................................... 29
Figure 7-4: Sample Radio Display .................................................................................................................................. 30
Figure 7-5: Menu Display ............................................................................................................................................... 35
Figure 7-6: Backlight Menu Item Selection Parameter ................................................................................................... 35
Figure 7-7: Backlight Menu Display .............................................................................................................................. 36
Figure 7-8: System Encryption Key Display .................................................................................................................. 39
Figure 7-9: Group/Channel Encryption Key Display ..................................................................................................... 39
Figure 7-10: Calls Received Lists ................................................................................................................................... 46
Figure 7-11: WHC Individual Call Display .................................................................................................................... 46
Figure 7-12: Calls Received and Personality Lists ......................................................................................................... 47
TABLES
Table 1-1: RF Exposure Compliance Testing Distances ................................................................................................ 11
Table 6-1: Options and Accessories ................................................................................................................................ 25
Table 7-1: Buttons, Knobs, and Switch Functions .......................................................................................................... 29
Table 7-2: XG-15P Keypad Functions ............................................................................................................................ 30
Table 7-3: Status Icon Descriptions ................................................................................................................................ 31
Table 7-4: Alert Tones .................................................................................................................................................... 33
Table 7-5: Menu Item Information ................................................................................................................................. 36
Table 9-1: Troubleshooting ............................................................................................................................................. 55
14221-1450-2000, Rev. B
9
1. REGULATORY AND SAFETY INFORMATION
1.1 SAFETY CONVENTIONS
The following conventions are used throughout this manual to alert the user to general safety precautions
that must be observed during all phases of operation, service, and repair of this product. Failure to comply
with these precautions or with specific warning elsewhere in this manual violates safety standards of
design, manufacture, and intended use of the product. Harris assumes no liability for the customer’s
failure to comply with these standards.
The WARNING symbol calls attention to a procedure, practice, or the like, which, if
not correctly performed or adhered to, could result in personal
understood or met.
The CAUTION symbol calls attention to an operating procedure, practice, or the like,
which, if not performed correctly or adhered to, could result in damage to the equipment
or severely degrade the equipment performance.
The NOTE symbol calls attention to supplemental information, which may improve
system performance or clarify a process or procedure.
1.2 SAFETY TRAINING INFORMATION
The Harris XG-
15P portable radio generates RF electromagnetic energy during
transmit mode. This radi
o is designed for and classified as “Occupational Use
Only,” meaning it must be used only during the course of employment by
individuals aware of the hazards and the ways to minimize such hazards. This
radio is NOT intended for use by the “General Populati
on” in an uncontrolled
environment.
The XG-15P portable radio has been tested and complies with the FCC RF exposure limits for
“Occupational Use Only.” In addition, this Harris radio complies with the following Standards and
Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for
exposure to humans:
FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for
Human Exposure to Radio Frequency Electromagnetic Fields.
American National Standards Institute (C95.1 1992), IEEE Standard for Safety Levels with Respect
to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
American National Standards Institute (C95.3 1992), IEEE Recommended Practice for the
Measurement of Potentially Hazardous Electromagnetic Fields RF and Microwave.
WARNING
CAUTION
NOTE
WARNING
14221-1450-2000, Rev. B
10
IC Standard RSS-102 Issue 5, March 2015, Radio Frequency (RF) Exposure Compliance of
Radiocommunication Apparatus (All Frequency Bands).
DIRECTIVE 2004/40/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 29
April 2004 on the minimum health and safety requirements regarding the exposure of workers to the
risks arising from physical agents (electromagnetic fields) and amended by:
Directive 2007/30/EC of the European Parliament and of the Council of 20 June 2007
Directive 2008/46/EC of the European Parliament and of the Council of 23 April 2008
Regulation (EC) No 1137/2008 of the European Parliament and of the Council of 22 October
2008
Directive 2012/11/EU of the European Parliament and of the Council of 19 April 2012
1.2.1 RF Exposure Guidelines
To ensure that exposure to RF electromagnetic energy is within the FCC allowable
limits for occupational use and/or the exposure limit values in Annex A of EU Directive
2004/40/EC, always adhere to the following guidelines:
DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may
also cause the FCC RF exposure limits and/or the exposure limit values in Annex A of EU Directive
2004/40/EC to be exceeded. A proper antenna is the antenna supplied with this radio by Harris or an
antenna specifically authorized by Harris for use with this radio. (Refer to Table 6-1.)
DO NOT transmit for more than 50% of total radio use time (“50% duty cycle”). Transmitting more
than 50% of the time can cause FCC RF exposure compliance requirements and/or the exposure limit
values in Annex A of EU Directive 2004/40/EC to be exceeded. The radio is transmitting when the
“TX” indicator appears in the display. The radio will transmit by pressing the “PTT” (Push-To-Talk)
button.
ALWAYS transmit using low power when possible. In addition to conserving battery charge, low
power can reduce RF exposure.
ALWAYS use Harris authorized accessories (antennas, batteries, belt clips, speaker/mics, etc). Use of
unauthorized accessories may cause the FCC Occupational/Controlled Exposure RF compliance
requirements and/or the exposure limit values in Annex A of EU Directive 2004/40/EC to be
exceeded. (Refer to Table 1-1.)
As noted in Table 1-1, ALWAYS keep the housing of the transmitter AT LEAST 1.4 cm (0.55
inches) from the body and at least 2.5 cm (0.98 inches) from the face when transmitting to ensure
FCC RF exposure compliance requirements and/or the exposure limit values in Annex A of EU
Directive 2004/40/EC are not exceeded. However, to provide the best sound quality to the recipients
of your transmission, Harris recommends you hold the microphone at least 5 cm (2 inches) from
mouth, and slightly off to one side.
CAUTION
14221-1450-2000, Rev. B
11
Table 1-1: RF Exposure Compliance Testing Distances
RADIO FREQUENCY (MHz)
TESTED DISTANCES
(worst case scenario)
Body
1
Face
700/800 MHz
(768.0125 - 775.9875)
(798.0125 - 804.9875)
(806.0125 - 815.09875)
(851.0125 - 860.9875)
1.4 cm (0.55 in.) 2.5 cm (0.98 in.)
VHF (136 - 174 MHz)
With Body-Worn Accessory:
0 cm (0 in.)
2.5 cm (0.98 in.)
UHF (440-512MHz)
With Body-Worn Accessory:
0 cm (0 in.)
2.5 cm
(0.98 in)
The information in this section provides the information needed to make the user aware of RF exposure,
and what to do to assure that this radio operates within the FCC RF exposure limits and/or the exposure
limit values in Annex A of EU Directive 2004/40/EC.
1.2.2 Electromagnetic Interference/Compatibility
During transmissions, this Harris radio generates RF energy that can possibly cause interference with
other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to
do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as
hospitals, aircraft, and blasting sites.
1.3 REGULATORY APPROVALS
1.3.1 Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
1.3.2 Industry Canada
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
1.4 OPERATING TIPS
Antenna location and condition are important when operating a portable radio. Operating the radio in low
lying areas or terrain, under power lines or bridges, inside of a vehicle, or in a metal framed building can
severely reduce the range of the unit. Mountains can also reduce the range of the unit.
In areas where transmission or reception is poor, some improvement may be obtained by ensuring that the
antenna is vertical. Moving a few yards in another direction or moving to a higher elevation may also
improve communications. Vehicular operation can be aided with the use of an externally mounted
antenna.
1
This is worst case based on the thinnest body mount accessory (belt clip).
14221-1450-2000, Rev. B
12
Battery condition is another important factor in the trouble free operation of a portable radio. Always
properly charge the battery.
1.5 EFFICIENT RADIO OPERATION
Keep the antenna in a vertical position when receiving or transmitting a message.
Do NOT hold onto the antenna when the radio is powered on!
1.5.1 Antenna Care and Replacement
Do not use the portable radio with a damaged or missing antenna. A minor burn
damaged antenna immediately. Operating a portable radio with the antenna missing
could cause personal injury, damage the radio, and may violate FCC regulations.
attachments could cause damage to the radio unit and may violate FCC regulations. (Refer
to Table 6-1.)
1.5.2 Electronic Devices
electronic equipment in cars, hospitals, homes, etc. is shielded from RF energy. However,
in areas in which you are instructed to turn off two-way radio equipment, always observe
the rules. If in doubt, turn it off!
1.5.3 Aircraft
Always turn off a portable radio before boarding any aircraft!
Use it on the ground only with crew permission.
DO NOT use while in-flight!!
1.5.4 Electric Blasting Caps
To prevent accidental detonation of electric blasting caps, DO NOT use two-way
radios within 1000 feet of blasting operations. Always obey the "Turn Off Two-Way
Radios" signs posted where electric blasting caps are being used. (OSHA Standard:
1926.900)
WARNING
WARNING
CAUTION
CAUTION
WARNING
WARNING
14221-1450-2000, Rev. B
13
1.5.5 Potentially Explosive Atmospheres
marked. These may be fuelling areas, such as gas stations, fuel or chemical transfer
or storage facilities, and areas where the air contains chemicals or particles, such as
grain, dust, or metal powders.
Sparks in such areas could cause an explosion or fire resulting in bodily injury or
even death.
Turn off two-way radios when in any area with a potentially explosive atmosphere. It
is rare, but not impossible that a radio or its accessories could generate sparks.
WARNING
14221-1450-2000, Rev. B
14
2. RENSEIGNEMENTS SUR LA RÉGLEMENTATION ET
SÉCURITÉ
2.1 CONVENTIONS SUR LES SYMBOLES DE SÉCURITÉ
Les conventions suivantes sont utilisées dans le présent manuel pour avertir l’utilisateur des précautions
générales de sécurité qui doivent être observées pendant toutes les phases d’opération, d’entretien et de
réparation de ce produit. Le non-respect de ces précautions ou d’avertissements précisés ailleurs enfreint
les normes de sécurité de la conception, de la fabrication et de l’utilisation prévue du produit. Harris
n’assume aucune responsabilité pour le non-respect de ces normes par le client.
MISE EN GARDE
Le symbole MISE EN GARDE attire l’attention sur une procédure ou une
pratique qui, si elle n’est pas correctement effectuée ou observée, pourrait
entraîner une blessure personnelle. Ne pas poursuivre au-delà d’un symbole de
MISE EN GARDE avant que les conditions identifiées soient complètement
comprises ou satisfaites.
AVERTISSEMENT
Le symbole AVERTISSEMENT attire l’attention sur une procédure ou une pratique
opérationnelle qui, si elle n’est pas
correctement effectuée ou observée, pourrait
entraîner un bris d’équipement ou une importante baisse de rendement de l’équipement.
REMARQUE
Le symbole REMARQUE attire l’attention sur des renseignements supplémentaires qui
peuvent améliorer le rendement du système ou clarifier un processus ou une procédure.
2.2 RENSEIGNEMENTS SUR LA FORMATION SUR LA SÉCURITÉ
MISE EN GARDE
La radio portative Harris XG-15P produit de lénergie électromagnétique des RF
lorsqu
en mode de transmission. Cette radio est conçue et classée pour une
« Utilisation professionnelle seulement », ce qui signifie quelle ne doit être utilisée
que dans le cadre dun emploi par des i
ndividus conscients des risques et des
moyens de limiter ceux-ci. Cette radio NEST PAS conçue pour une utilisation par
la « Population générale » dans un environnement non contrôlé.
La radio portative XG-15P a été testée et est conforme aux limites dexposition aux RF de la FCC pour
une « Utilisation professionnelle seulement ». De plus, cette radio Harris est conforme aux normes et
directives suivantes quant à lénergie des RF et aux niveaux dénergie électromagnétique, ainsi quà
l’évaluation de ces niveaux pour lexposition aux humains :
Bulletin 65 du OET de la FCC, édition 97-01, supplément C, portant sur lévaluation de la conformité
aux directives de la FCC quant à lexposition humaine aux champs électromagnétiques des
radiofréquences.
American National Standards Institute (C95.1 1992), norme de lIEEE sur les niveaux sécuritaires
d’exposition humaine aux champs électromagnétiques des radiofréquences, 3 kHz à 300 GHz.
American National Standards Institute (C95.3 1992), pratique recommandée par lIEEE pour la
mesure des champs électromagnétiques potentiellement dangereux RF et micro-ondes.
14221-1450-2000, Rev. B
15
IC la norme RSS-102, Numéro 4, 2010: Gestion du spectre et télécommunications normes
radioélectriques. L'exposition aux radiofréquences Conformité des appareils de radiocommunication
(toutes bandes de fréquences).
2.2.1 Directives sur l’exposition aux RF
AVERTISSEMENT
Pour sassurer que lexposition à lénergie électromagnétique des RF se situe dans les
limites acceptables de la FCC pour lutilisation professionnelle, respectez toujours les
directives suivantes :
N’utilisez PAS la radio sans quune antenne appropriée y soit connectée, car ceci peut endommager la
radio et également causer un dépassement des limites dexposition aux RF de la FCC. Une antenne
appropriée est celle fournie par Harris avec cette radio, ou une antenne spécifiquement autorisée par
Harris pour être utilisée avec cette radio. (Reportez-vous à Table 6-1.)
Ne transmettez PAS pendant plus de 50 % de la durée dutilisation totale de la radio (« cycle de
service de 50 % »). La transmission pendant plus de 50 % du temps peut causer un dépassement des
exigences de conformité de la FCC en matière dexposition aux RF. La radio transmet lorsque
l’indicateur « TX » apparaît sur laffichage. La radio transmet lorsquon appuie sur le bouton « PTT »
(bouton de microphone).
Transmettez TOUJOURS en basse puissance lorsque possible. En plus de préserver la charge de la
pile, une faible puissance réduit lexposition aux RF.
Utilisez TOUJOURS des accessoires autorisés Harris (antennes, piles, pinces de ceinture, haut-
parleurs/micros, etc.). Lutilisation daccessoires non autorisés peut entraîner un dépassement des
exigences de conformité pour une exposition aux RF professionnelle ou contrôlée de la FCC.
(Reportez-vous à Tableau 2-1.)
Tel quindiqué dans Tableau 2-1, conservez TOUJOURS lappareil et son antenne à AU MOINS
1,4 cm du corps, et à au moins 2,5 cm du visage pendant la transmission, pour vous assurer de ne pas
dépasser les exigences de conformité de la FCC en matière dexposition aux RF. Cependant, pour
offrir la meilleure qualité sonore aux auditeurs de votre transmission, Harris recommande de tenir le
microphone à au moins 5 cm de votre bouche et légèrement déplacé sur un côté.
14221-1450-2000, Rev. B
16
Tableau 2-1: Distances de test de conformité des expositions aux RF
RADIO FRÉQUENCES
DISTANCES TESTÉES
(pire des scénarios)
Corps
2
Visage
700/800 MHz
(768.0125 - 775.9875)
(798.0125 - 804.9875)
(806.0125 - 815.09875)
(851.0125 - 860.9875)
1,4 cm 2,5 cm
VHF (136 - 174 MHz)
avec l'accessoire porté
sur le corps:
0 cm (0 in.)
2,5 cm
UHF (440-512MHz)
avec l'accessoire porté
sur le corps:
0 cm (0 in.)
2,5 cm
Dans cette section figurent les renseignements nécessaires pour sensibiliser lutilisateur à lexposition aux
RF et sur ce quil faut faire pour sassurer que cette radio fonctionne dans les limites dexposition aux RF
de la FCC.
2.2.2 Interférence/Compatibilité Électromagnétique
Pendant les transmissions, cette radio Harris produit de lénergie des RF qui peut causer de linterférence
avec dautres appareils ou systèmes. Pour éviter de telles interférences, fermez la radio dans les zones où
il est indiqué de le faire. Nutilisez PAS le transmetteur dans des zones sensibles aux radiations
électromagnétiques, comme les hôpitaux, les avions et les sites de détonation.
2.3 INTERFÉRENCE DES RADIOFRÉQUENCES
2.3.1 Partie 15 de la FCC
Cet appareil est conforme à la Partie 15 de la réglementation de la FCC. Le fonctionnement est soumis
aux deux conditions suivantes :
1. Cet appareil ne doit pas causer une interférence nuisible; et
2. Cet appareil doit accepter toute interférence reçue, y compris une interférence qui peut causer un
fonctionnement non souhaité.
2.3.2 Industrie Canada
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
2.4 CONSEILS D’UTILISATION
L’emplacement et létat de lantenne sont importants pour lutilisation dune radio portative. Lutilisation
de la radio dans des zones de faible élévation, sous des lignes électriques ou des ponts, à lintérieur dun
véhicule ou dans un immeuble à ossature métallique, peut réduire la portée de lappareil de manière
considérable. Les montagnes peuvent également réduire la portée de lunité.
2
Ce est le pire des cas basée sur le corps plus mince monter accessoire (clip ceinture).
14221-1450-2000, Rev. B
17
Dans les zones où la transmission ou la réception est insatisfaisante, certaines améliorations peuvent être
obtenues en sassurant que lantenne est verticale. Se déplacer de quelques mètres dans une autre
direction ou à un emplacement plus élevé peut également améliorer les communications. Lutilisation
d’une antenne fixée à lextérieur peut faciliter le fonctionnement dans un véhicule.
L’état de la pile est un autre facteur important dune utilisation sans tracas dune radio portative. Chargez
toujours correctement la pile.
2.4.1 Utilisation Efficace de la Radio
Gardez lantenne dans une position verticale pendant la réception ou la transmission dun message.
MISE EN GARDE
Ne tenez PAS lantenne lorsque la radio est allumée!
2.4.1.1 Entretien Et Remplacement De L’antenne
MISE EN GARDE
N’
utilisez pas la radio portative si son antenne est endommagée ou absente. Une
brûlure légère peut se produire au contact d
une antenne endommagée avec la
peau. Remplacez immédiatement une antenne endommagée. Lutilisation dune
radio portative alors que l
antenne est absente peut causer des blessures,
endommager la radio et pourrait enfreindre la réglementation de la FCC.
AVERTISSEMENT
Utilisez seulement l
autorisées, des modifications ou des ajouts à une antenne peuvent endommager la radio et
enfreindre la réglementation de la FCC. (Reportez-vous à Table 6-1.)
2.4.1.2 Appareils Électroniques
AVERTISSEMENT
L’
électroniques. La majorité de léquipement électronique
hôpitaux, les maisons, etc. est blindé contre lénergie des RF. Cependant, dans les zones
où lon vous demande de fermer léquipement de radio bidirectionnelle, respectez toujours
les règles. En cas de doute, éteignez-le!
2.4.1.3 Avion
MISE EN GARDE
Éteignez toujours une radio portative avant dembarquer à bord dun avion!
Ne lutilisez au sol quavec la permission de léquipage.
NE lutilisez PAS durant le vol!
14221-1450-2000, Rev. B
18
2.4.1.4 Détonateurs Électriques
MISE EN GARDE
Pour prévenir la détonation accidentelle des détonateurs électriques, nutilisez PAS
de radios bidirectionnelles à moins de 305 m (1 000 pi) des opérations de détonation.
Respectez toujours les indications « Éteindre les radios bidirectionnelles » situées là
où des détonateurs électriques sont utilisés. (Norme OSHA : 1926.900)
2.4.1.5 Atmosphère Potentiellement Explosive
MISE EN GARDE
Les zones ayant une atmosphère potentiellement explosive sont souvent, mais pas
toujours, identifiées clairement comme telles. Il peut sagir de zones dalimentation
en carburant, comme les postes d
essence, les installations de stockage ou de
transfert de carburant ou de produits chimiques, ainsi que les zones dont lair
contient des produits chimiques ou des particules, comme des grains, de la poussière
ou des poudres métalliques.
Des étincelles dans de telles zones peuvent provoquer une explosion ou un incendie,
causant ainsi des blessures ou même la mort.
Éteignez les radios bidirectionnelles dans toute zone ayant
une atmosphère
potentiellement explosive. Il est rare, mais pas impossible qu
une radio ou ses
accessoires produisent des étincelles.
14221-1450-2000, Rev. B
19
3. CLEANING
Keep the exterior of the radio, battery, antenna, and radio accessories clean.
Periodically clean using the following procedures:
1. To remove dust and dirt, clean using a damp clean cloth (warm water and mild detergent soap).
2. Follow by wiping with a damp (warm water) clean cloth. Wipe dry with a clean cloth.
3. Remove the battery and wipe the battery and radio contacts using a soft dry cloth to remove dirt or
grease. This will ensure efficient power transfer from the battery to the radio.
4. Remove any accessories and clean the accessories Universal Device Connector (UDC) contacts using
a clean dry cloth. When the UDC is not in use, cover the connector with the protective dust cap to
prevent the build-up of dust or water particles.
5. If the radio is used in a harsh environment (such as driving rain, salt fog, etc.), it may be necessary to
periodically dry and clean the battery and radio contacts with a soft dry cloth or soft-bristle non-
metallic brush.
For more rigorous cleaning, use the following procedure:
CAUTION
Do not use chemical cleaners, spray, or petroleum-based products. They may damage
the radio housing. We recommend using Chemtronics
®
Electro-Wash
®
PR (ES-1603) or
equivalent.
1. Apply the cleaning solution to a clean damp cloth and clean the radio.
Do not spray cleaning solution directly on radio. To clean the radio in the speaker and
microphone areas, carefully wipe these areas but prevent the cleaning solution from
entering the speaker or microphone openings.
2. Wipe off the radio with a clean damp cloth using mild warm soapy water.
3. Follow up by wiping off the radio with a clean damp cloth using warm water only.
4. Wipe dry with a clean cloth.
NOTE
14221-1450-2000, Rev. B
20
4. BATTERIES
The XG-15P series portable radios use rechargeable, recyclable Lithium-Ion (Li-Ion) batteries. Please
follow the directions below to maximize the useful life of the battery.
WARNING
Do not disassemble or modify Lithium battery packs. Lithium battery packs are
equipped with built-in safety and protection features. S
hould these features be
disabled or tampered with in any way, the battery pack can leak electrolyte,
overheat, emit smoke, burst, and/or, ignite.
If the battery is ruptured or is leaking electrolyte that results in skin or eye contact
with the electrolyte, immediately flush the affected area with water. If the battery
electrolyte gets in the eyes, flush with water for 15 minutes and consult a physician
immediately.
4.1 BATTERY CARE/MAINTENANCE
For information regarding the proper care of portable radio battery packs or establishing a battery
maintenance program, refer to ECR-7367 which may be ordered by calling toll free 1-800-368-3277
(international: 1-434-455-6403) or via
https://premier.pspc.harris.com/infocenter/.
4.2 STORING LI-ION BATTERY PACKS
If a battery pack is expected to be idle for a month or more, it should be properly prepared. Li-Ion battery
packs should not be stored fully charged. Before storing the battery pack, discharge it to 40% capacity. If
the battery is not discharged prior to storage, its overall capacity may be reduced. Although all battery
packs experience some capacity loss during storage, the shelf life for Li-Ion battery packs is about three
months. However, note that any capacity drop which occurs during storage is permanent and cannot be
reversed. Li-Ion battery packs should be purchased and used immediately. They should not be stock-
piled without a rotating stock plan.
4.3 CHARGING BATTERY PACKS
Battery chargers are available from Harris with nominal charge times. Combinations include single and
multi-position chargers.
Harris chargers are specifically designed for charging Lithium-Ion battery packs. The chargers are
chemistry-specific for the battery packs and automatically adjust the charging profiles accordingly. Refer
to the appropriate charger manual for specific operating instructions.
Observe the following guidelines when charging a battery pack:
Avoid high temperature during charging.
Discontinue use if the charger is overheating.
Only charge Harris battery packs using a charger approved for use by Harris.
Do not leave batteries in the charger indefinitely. For best results leave the battery in the charger for
two to six hours after the Green Ready LED comes on. Then place the battery pack into service and
fully discharge (as indicated by the radio low battery warning) before re-charging.
WARNING
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58

Harris XG-15P series Manuel utilisateur

Catégorie
Radios bidirectionnelles
Taper
Manuel utilisateur

dans d''autres langues