Winmate IBDRW100-EX-P Manuel utilisateur

Please read this instructions carefully before using this product, and save this manual for future use.

DIN Rail Box PC

IBDRW100-P/ IBDRW100-EX-P

Intel® Pentium® Processor N4200 1.1 GHz, up to 2.56 GHz

User Manual

Version 1.0

Document Part No. 917111101106

2

IBDRW100-P/ IBDRW100-EX-P User Manual

Contents

Preface ...................................................................................................................................... 4

About This User Manual .......................................................................................................... 7

Chapter 1: Introduction ........................................................................................................... 8

1.1 Product Overview ............................................................................................................. 8

1.2 Product Features .............................................................................................................. 8

1.2 Accessories ...................................................................................................................... 9

1.3 Chassis Dimensions ...................................................................................................... 10

1.4 Description of Parts ....................................................................................................... 10

Chapter 2: Hardware Installation .......................................................................................... 11

2.1 Connectors Description ................................................................................................. 11

2.1.1 USB 3.0 Connector .................................................................................................... 11

2.1.2 USB 2.0 Connector .................................................................................................... 11

2.1.3 RJ-45 for Giga LAN Connector .................................................................................. 11

2.1.4 VGA Connector ......................................................................................................... 12

2.1.5 Serial Port RS-232/422/485 Connector ..................................................................... 12

2.1.6 Isolated RS422/485 Connector .................................................................................. 13

2.1.7 Audio Jack ................................................................................................................. 13

2.1.8 DIDO Connector ........................................................................................................ 13

2.1.9 DC Power 3pin Terminal Block .................................................................................. 14

2.2 Configuring COM2 Settings by Jumpers ..................................................................... 14

Chapter 3: Initial Setup .......................................................................................................... 15

3.1 DIN Rail Mounting Setup ................................................................................................ 15

3.2 Cable ARM Bracket Installation (Optional for IBDRW100-EX-P) ................................. 16

3.3 Enclosure for IBDRW100-EX-P ...................................................................................... 17

Chapter 4: Insyde BIOS Setup .............................................................................................. 19

4.1 BIOS Introduction........................................................................................................... 19

4.1.1 BIOS Setup and Boot Procedure ............................................................................... 19

4.1.2 BIOS Setup Keys ....................................................................................................... 19

4.2 BIOS Menu ...................................................................................................................... 20

4.2.1 Main ........................................................................................................................... 20

4.2.3 Advanced ................................................................................................................... 21

4.2.4 H2oUve Configuration ............................................................................................... 34

4.2.5 Security ...................................................................................................................... 35

4.2.6 Power ........................................................................................................................ 36

3

Preface

4.2.7 Boot ........................................................................................................................... 37

4.2.8 Exit ............................................................................................................................. 39

4.3 Using Recovery Wizard to Restore the System ........................................................... 41

Chapter 5: Driver Installation ................................................................................................ 42

5.1 Chipset Driver Installation ............................................................................................. 42

5.2 Graphics Driver Installation ........................................................................................... 44

5.3 TXE Driver Installation ................................................................................................... 48

5.4 Audio Driver Installation ................................................................................................ 50

5.5 LAN Driver Installation ................................................................................................... 52

Appendix................................................................................................................................. 55

Appendix A: Hardware Specifications................................................................................ 55

Appendix B: Approvals and Certifications ........................................................................ 57

4

IBDRW100-P/ IBDRW100-EX-P User Manual

Preface

Copyright Notice

No part of this document may be reproduced, copied, translated, or transmitted in any form or

by any means, electronic or mechanical, for any purpose, without the prior written permission

of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits and/or

software described or contained in this manual in order to improve design and/or performance.

We assume no responsibility or liability for the use of the described product(s) conveys no

license or title under any patent, copyright, or masks work rights to these products, and make

no representations or warranties that these products are free from patent, copyright, or mask

work right infringement, unless otherwise specified. Applications that are described in this

manual are for illustration purposes only. We make no representation or guarantee that such

application will be suitable for the specified use without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material and workmanship

defects for a period of one year from the invoice date. If the customer discovers a defect, we

will, at his/her option, repair or replace the defective product at no charge to the customer,

provide it is returned during the warranty period of one year, with transportation charges

prepaid. The returned product must be properly packaged in its original packaging to obtain

warranty service. If the serial number and the product shipping data differ by over 30 days, the

in-warranty service will be made according to the shipping date. In the serial numbers the third

and fourth two digits give the year of manufacture, and the fifth digit means the month (e. g.,

with A for October, B for November and C for December).

For example, the serial number 1W16Axxxxxxxx means October of year 2016.

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website of

our distributor to find the update information about the product. Second, contact with your

distributor, sales representative, or our customer service center for technical support if you

need additional assistance.

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

 Description of complete problem

 The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We are

always ready to give advice on application requirements or specific information on the

installation and operation of any of our products.

5

Preface

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or to

alert you to the potential for hardware damage or personal injury. These are Notes, Important,

Cautions, and Warnings. The following is an example of each type of advisory.

Note:

A note is used to emphasize helpful information

Important:

An important note indicates information that is important for you to know.

Caution A Caution alert indicates potential damage to hardware and explains how

to avoid the potential problem.

Attention Une alerte d’attention indique un dommage possible à l’équipement et

explique comment éviter le problème potentiel.

Warning! An Electrical Shock Warning indicates the potential harm from electrical

hazards and how to avoid the potential problem.

Avertissement! Un Avertissement de Choc Électrique indique le potentiel de

chocs sur des emplacements électriques et comment éviter ces problèmes.

Safety Information

Warning! Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections while the

power is on. Sensitive electronic components can be damaged by sudden power

surges. Only experienced electronics personnel should open the PC chassis.

Avertissement! Toujours débrancher le cordon d’alimentation du chassis

lorsque vous travaillez sur celui-ci. Ne pas brancher de connections lorsque

l’alimentation est présente. Des composantes électroniques sensibles peuvent

être endommagées par des sauts d’alimentation. Seulement du personnel

expérimenté devrait ouvrir ces chassis.

Caution Always ground yourself to remove any static charge before touching

the CPU card. Modern electronic devices are very sensitive to static electric

charges. As a safety precaution, use a grounding wrist strap at all times. Place all

electronic components in a static-dissipative surface or static-shielded bag when

they are not in the chassis.

Attention Toujours verifier votre mise à la terre afin d’éliminer toute charge

statique avant de toucher la carte CPU. Les équipements électroniques moderns

sont très sensibles aux décharges d’électricité statique. Toujours utiliser un

bracelet de mise à la terre comme précaution. Placer toutes les composantes

électroniques sur une surface conçue pour dissiper les charge, ou dans un sac

anti-statique lorsqu’elles ne sont pas dans le chassis.

Alternating Current The Protective Conductor Terminal (Earth Ground)

symbol indicates the potential risk of serious electrical shock due to improper

grounding.

Mise à le terre ! Le symbole de Mise à Terre indique le risqué potential de

choc électrique grave à la terre incorrecte.

6

IBDRW100-P/ IBDRW100-EX-P User Manual

Safety Precautions

For your safety carefully read all the safety instructions before using the device. Keep

this user manual for future reference.

 Always disconnect this equipment from any AC outlet before cleaning. Do not use liquid or

spray detergents for cleaning. Use a damp cloth.

 For pluggable equipment, the power outlet must be installed near the equipment and must

be easily accessible.

 Keep this equipment away from humidity.

 Put this equipment on a reliable surface during installation. Dropping it or letting it fall

could cause damage.

 The openings on the enclosure are for air convection and to protect the equipment from

overheating.

Caution Do not cover the openings!

Attention Ne couvrez pas les ouvertures!

 Before connecting the equipment to the power outlet make sure the voltage of the

power source is correct.

 Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

 If the equipment is not used for a long time, disconnect it from the power source to

avoid damage by transient over-voltage.

 Never pour any liquid into an opening. This could cause fire or electrical shock.

 Never open the equipment. For safety reasons, only qualified service personnel

should open the equipment.

 All cautions and warnings on the equipment should be noted.

Caution Always ground yourself to remove any static charge before

touching the board. Modern electronic devices are very sensitive to static

electric charges. As a safety precaution, use a grounding wrist strap at all

times. Place all electronic components in a static-dissipative surface or

static-shielded bag when they are not in the chassis.

Attention Mettez-vous toujours à la terre pour éliminer toute charge

statique avant de toucher la carte. Les appareils électroniques modernes sont

très sensibles aux charges électriques statiques. Par mesure de sécurité,

utilisez en tout temps un bracelet antistatique. Placez tous les composants

électroniques dans une surface antistatique ou dans un sac blindé

antistatique lorsqu'ils ne sont pas dans le châssis.

General Guideline

It is recommended to reboot the device when some functions are defect or inactive. If it still can't

solve the problems please contact your dealer or agent.

Special Conditions of Use

Winmate IBDRW100-EX-P is to be installed in an ATEX certified IP54 (as defined in EN 60079-

0 and EN 60079-15) enclosure and may be accessible only by the use of a tool. Provision shall

be made to prevent the rated voltage being exceeded by the transient disturbances of more

than 140% of the peak rated voltage.

7

About This User Manual

This User Manual provides information about using the IBDRW100-P Series DIN Rail Box PC.

This User Manual applies to the IBDRW100-P Series DIN Rail Box PC - IBDRW100-P/

IBDRW100-EX-P.

The documentation set for the IBDRW100-P Series DIN Rail Box PC provides information for

specific user needs, and includes:

 User Manual – contains detailed description on how to use the IBDRW100-P Series

DIN Rail Box PC, its components and features.

Note:

Some pictures in this guide are samples and can differ from actual product.

Document Revision History

Version

Date

Note

1.0

10-Feb-2020

New document release.

8

IBDRW100-P/ IBDRW100-EX-P User Manual

Chapter 1: Introduction

1.1 Product Overview

Winmate IBDRW100-P Series is a DIN-rail mounted Fanless Box PC, which provides several

serial communication ports. With a compact size and small form factor as well as front

accessible I/O port. The IBDRW100-P Series is very convenient for wiring and DIN-rail

installation in the control cabinet. The wide operation temperature and Industrial serial port

design makes this unit a perfect communication even in harsh and critical location. IBDRW100-

EX-P Series is ATEX and Class 1 Division 2 certified DIN Rail Box pc for hazardous location

deployment and for ATEX certified Box PC requires special enclosure box. The IBDRW100-P

Series are certified to support the ecosystem of AWS IoT Greengrass giving customers more

options for software integration for IoT applications.

1.2 Product Features

Highlights

• Class 1, Division 2&ATEX Zone 2 device certified for hazardous area (IBDRW100-EX-P)

• Designed for industrial automation, DIN Rail application

• Intel® Pentium® Processor N4200 1.1GHz up to 2.56GHz

• 1 x RS232 / 422 / 485 communications, select thru bios

• 4 x Giga LAN, 3 x USB 3.0, 1 x USB 2.0, 1 x VGA,

1 x Line out, 1 x Line in, 1 x Mic in, 1 x Power Jack

• Fanless, streamlined enclosure for highly efficient heat dissipation

• Rated for wide temperature use -20˚C to 60˚C

• Certified AWS loT Greengrass

9

Chapter 1: Introduction

1.2 Accessories

 AC to DC 12V 36W

Power Adapter (For

testing only)

 Power Cord

 Terminal Block 3

pin to 2.5 Ø Female

Adapter Cable

 Open Wire Power

Cable

Part No. 922D036W12V6

Varies by the country

Part No. 94J602G030K0

Part No. 94EL02X020E0

 User Manual

 DIN Rail

Mounting Clip

 Terminal Block

10 pin female

connector for DIDO

x 2

 Terminal Block

3 pin Connector

for Power

Part No. 917111101106

Part No. 90ME01000000

Part No. 604530005D01

Part No.604520105001

Cable Holder Kit (only

for IBDRW100-P-EX)

Part No. 821118561K00 x 2

Part No 821118561K01 /

Part No 821118561K02

10

IBDRW100-P/ IBDRW100-EX-P User Manual

1.3 Chassis Dimensions

Unit: mm

1.4 Description of Parts

Front

1. VGA

2. RS232/422/485

3. LAN

4.LAN

5. USB

6. Audio Jack

L

A

N

Rear

7. Isolated RS422 default (RS485 as

optional)

8. DIDO

9. Power terminal Block (9-36V DC IN)

11

Chapter 2: Hardware Installation

2.1 Connectors Description

This section describes pin assignment and signal names of IBDRW100-P/ IBDRW100-EX-P

interfaces.

2.1.1 USB 3.0 Connector

The IBDRW100-P/ IBDRW100-EX-P provide three USB 3.0 connectors. Use USB 3.0

connector to connect external devices such as mouse or keyboard to the box computer.

Pin assignment and signal names of USB connector

2.1.2 USB 2.0 Connector

The IBDRW100-P/ IBDRW100-EX-P provide one USB 2.0 connectors. Use USB 2.0 connector

to connect external devices such as mouse or keyboard to the box computer.

Pin assignment and signal names of USB connector

2.1.3 RJ-45 for Giga LAN Connector

The IBDRW100-P/ IBDRW100-EX-P have two Ethernet connectors located on the front.

Ethernet ports provide a standard RJ45 10/100/1000 Mbps jack connector with LED indicators

on the front side to show its Active/ Link status and Speed status.

Pin assignment and signal names of Ethernet connector

10/100 Mbps- Green

1G Mbps – Orange

Pin №

Signal Name

Pin №

Signal Name

1

+5V

2

USB_D-

3

USB_D+

4

GND

5

STDA_SSRX-

6

STDA_SSRX+

7

GND

8

STDA_SSTX-

9

STDA_SSTX+

Pin №

Signal Name

Pin №

Signal Name

1

+5V

2

Data-

3

Data+

4

GND

Pin №

Signal Name

Pin №

Signal Name

1

TX1+

2

TX1-

3

TX2+

4

TX3+

5

TX3-

6

TX2-

7

TX4+

8

TX4-

12

IBDRW100-P/ IBDRW100-EX-P User Manual

2.1.4 VGA Connector

The IBDRW100-P/ IBDRW100-EX-P have one VGA DB15 connector. Use VGA cable to connect

DIN-Rail Box Computer to external monitor.

Pin assignment and signal names of VGA connector

Maximum resolution (VGA)

1920 x 1200 @60 HZ

2.1.5 Serial Port RS-232/422/485 Connector

The IBDRW100-P/ IBDRW100-EX-P have one COM1 9-pin D-sub connectors that offer

RS-232/422/485 serial communication interface ports. Default setting is RS-232, but this can be

modified by BIOS.

Pin assignment and signal names of RS-232/422/485 connector

Pin №

Signal Name

Pin №

Signal Name

1

RED

2

GREEN

3

BLUE

4

NC

5

GND

6

GND

7

GND

8

GND

9

+5V

10

GND

11

NC

12

SDA

13

HSYNC

14

VSYNC

15

SCL

Pin №

RS-232

(Default)

RS422

RS485

1

DCD

Tx-

DATA-

2

RXD

Tx+

DATA+

3

TXD

RX+

NC

4

DTR

RX-

NC

5

GND

6

DSR

NC

7

RTS

NC

8

CTS

NC

9

RI

NC

13

Chapter 2: Hardware Installation

2.1.6 Isolated RS422/485 Connector

The IBDRW100-P/ IBDRW100-EX-P have one isolated COM1 9-pin D-sub connectors that offer

RS-422/485 serial communication interface ports. Default setting is RS-422, but this can be

modified by jumpers.

Pin assignment and signal names of isolated RS-422/485 connector

2.1.7 Audio Jack

The IBDRW100-P/ IBDRW100-EX-P have has three stereo audio ports with audio jack

connectors: Mic-in, Line-out, Line-in.

Pin assignment and signal names of audio jack

2.1.8 DIDO Connector

Pin assignment and signal names of DIDO connector

Pin №

RS422

RS485

1

Tx-

DATA-

2

Tx+

DATA+

3

RX+

NC

4

RX-

NC

5

GND

6

NC

7

NC

8

NC

9

NC

Color

Signal Name

BLUE

Line-in

GREEN

Line-out

PINK

Mic-in

Pin №

Signal Name

Pin №

Signal Name

1

GND

8

DINT1

2

DIO_5V

9

DINT2

3

DOUT3

10

DINT0

4

DOUT1

11

GPIO53_IN0

5

DOUT2

12

GPIO56_OUT0

6

DOUT0

13

GPIO54_IN1

7

DINT3

14

GPIO57_OUT1

14

IBDRW100-P/ IBDRW100-EX-P User Manual

2.1.9 DC Power 3pin Terminal Block

The DC power source input of the IBDRW100-P/ IBDRW100-EX-P is a 3 pin terminal block

connector that supports 9-36V DC power input.

Pin assignment and signal names of DC power 3pin terminal block

2.2 Configuring COM2 Settings by Jumpers

Serial Port COM2 can be configured for RS-422 or RS-485 by jumpers. Jumpers are located on

the motherboard. You need to open the housing in order to access the jumpers.

Caution It is recommended to use factory jumper settings. Opening the

housing when it is sealed may damage the device and its parts.

Attention Il est recommandé d’utiliser la configuration d’usine de cavalier.

Ouvrir le chassis lorsqu’il est scellé peut endommagé l’appareil et ses pièces.

Note: A pair of needle nose pliers may be helpful when working with jumpers.

If you have any doubts about the best hardware configuration for your

application, contact your local distributor or sales representative before you

make any changes. Generally, you simply need a standard cable to make most

connections.

The jumper setting diagram is shown below. When the jumper cap is placed on both pins, the

jumper is SHORT. The illustration below shows a 3-pin jumper; pins 1 and 2 are short. If you

remove the jumper cap, the jumper is OPEN.

PIN 1-2 SHORT

PIN 3 OPEN

Both Jumper 8 and Jumper 9 allow setting the Serial Port COM1 configuration. Refer to the table

below for PIN assignment.

RS422

RS485

JP8

JP9

JP8

JP9

1-2 (Open)

3-4 (Short)

5-6(Open)

1-3(Short)

4-6(Short)

7-9(Short)

10-12(Short)

1-2 (Open)

3-4 (Open)

5-6(Short)

1-3(Short)

4-6(Short)

7-9(Short)

10-12(Short)

Voltage

Minimum Voltage 9V

Maximum Voltage 36V

15

Chapter 3: Initial Setup

3.1 DIN Rail Mounting Setup

Please follow these steps to mount the IBDRW hook kit on a DIN rail

1. Screw the provided DIN-rail Kit on the rear side of the box as the diagram shown

below.

2. Please make sure the stiff metal handle part is located on the top

3. Press the stiff metal handle downward and insert the hook into the DIN-rail

4. Release the handle so it can snap into place as shown below

16

IBDRW100-P/ IBDRW100-EX-P User Manual

3.2 Cable ARM Bracket Installation (Optional for IBDRW100-EX-P)

In hazardous locations, sparks caused by the movement from a cable and connector which

is even slightly loose could lead to a disaster and to prevent this, cable arm bracket can be

use to secure some LAN, USB and Audio connectors. Follow these steps to complete the

installation

5. Find the cable arm bracket in the package, including the plate, bracket / holder, and

screws

6. Install the plate on the top of the box and screw it tightly

7. Plug all the necessary cables into the connectors

8. Place the cable arm bracket according to the picture and then attach the bracket /

holders to the plate and then screw it for securing the installed cables

17

Chapter 3: Initial Setup

3.3 Enclosure for IBDRW100-EX-P

User may also include secure mounting (hence the DIN Rail design) or mounting in specially

designed enclosure boxes. The pictures below show an IP54-spec enclosure box Winmate

uses for the IBDRW100-EX-P to meet ATEX and C1D2 certification. This enclosure box is

designed for ATEX (increased safety) protection are ideal for deployment in hazardous location

including

 Chemical and Petrochemical Industries

 Offshore energy

 Pharmaceutical industry

 Grain handling and processing

Caution/ Attention

 Make sure the specific mounting position for the Enclosure

 Please ensure that the surface of the wall / skid is flat to avoid distortion of the

enclosure

 Not to exceed maximal temperature

 All the cables must be made with a particular care

 When connecting the cables, please ensure the incoming cables/ wires are

isolated from all sources of power.

 Follow the instruction when installing the enclosure box

18

IBDRW100-P/ IBDRW100-EX-P User Manual

Follow these steps before installing the IBDRW100-EX-P inside the enclosure box:

1. Please check if the unit has been correctly installed without any damage

2. Please check if the wiring and screws have been properly tightened

3. Please check if the cable gland has been tightened

Follow these steps when maintaining the enclosure box:

1. Prevent and avoid any formation of dusts, please clean it with a cloth

2. Please check if there is any damage on the surface of the box

3. Please check the tightness of the connections / wires

Follow these steps to install the IBDRW100-EX-P inside of the enclosure box:

1. Attached DIN Rail adapter to the BDRW100-EX-P Box PC using the screws provided

2. Mount the DIN rail inside of the enclosure Box

3. Press the stiff metal handle from (DIN Rail adapter) downward and insert the hook into

the DIN-rail

4. Mount the Enclosure Box to a Wall / Skid, all the surface need to be flat to avoid any

distortion of the enclosure

5. Use the proper dimensions for drilling the holes to mount the enclosure box to a wall.

19

Chapter 4: Insyde BIOS Setup

4.1 BIOS Introduction

4.1.1 BIOS Setup and Boot Procedure

BIOS stand for “Basic Input Output System” and it is the most basic communication between user

and the hardware. To enter BIOS Setup, the [DEL] key must be pressed after the USB controller

has been initialized as soon as the following message appears on the monitor during Power On

Self-Test (POST): “Press

DEL to run SETUP”

Note: Update BIOS version may be published after the manual is released. Please check

with the latest version of BIOS on the website. User may need to run BIOS setup

utility for the following status:

1. Error message on screen indicate to check BIOS Setup

2. Restoring the Factory default setting

3. Modifying the specific hardware specification

4. Want to optimize the specification

4.1.2 BIOS Setup Keys

The following keys are enabled during POST:

Key

Function

Del

Enters the BIOS setup menu

F7

Display the boot menu. Lists all bootable devices that are

connected to the system. With cursor ↑ and cursor ↓ and by

pressing <ENTER>, select the device used for the boot

Pause

Pressing the [Pause] key stops the POST. Press any other key to

resume the POST.

The following keys can be used after entering the BIOS Setup:

Key

Function

F1

General Help

F2

Previous Values

F3

Optimized Defaults

F4

Save & Exit

Esc

Exit

+/-

Change Opt.

Enter

Select or execute command

Cursor ↑

Moves to the previous item

Cursor ↓

Goes to the next item

Cursor ←

Moves to the previous item

20

IBDRW100-P/ IBDRW100-EX-P User Manual

Cursor →

Goes to the next item

4.2 BIOS Menu

4.2.1 Main

Immediately after the [DEL] key is pressed during startup, the main BIOS setup menu

appears:

BIOS Setting

Description

Setting Options

Effect

Language

Select the current default

language by the Insyde20

Adjustment of the

language. Default:

English.

Set the default

language

System Time

The time is maintained by

the battery when the

device is turned off.

Adjustment of the

time

Set the time in the

format [hh:mm:ss]

System Date

This is current date

setting. The time is

maintained by the

battery when the device is

turned off

Changes to the

date

Set the date in the

format

[mm/dd/yyyy]

La page est en cours de chargement...

Winmate IBDRW100-EX-P Manuel utilisateur

Ce manuel convient également à

Winmate IBDRW100-EX-P Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents