Extron SMK V SB 33 Manuel utilisateur

Marque: Extron

Modèle: SMK V SB 33

Catégorie: Amplificateurs audio

Taper: Manuel utilisateur

Ce manuel convient également à

Sound Bar Speaker

User Guide

SB 33 A Series

Speakers

Adjustable Width Sound Bar

68-3103-01 Rev. A

05 19

TBD

Safety Instructions

Safety Instructions • English

WARNING: This symbol, , when used on the product, is intended to

alert the user of the presence of uninsulated dangerous voltage within the

product’s enclosure that may present a risk of electric shock.

ATTENTION: This symbol, , when used on the product, is intended

to alert the user of important operating and maintenance (servicing)

instructions in the literature provided with the equipment.

For information on safety guidelines, regulatory compliances, EMI/EMF

compatibility, accessibility, and related topics, see the Extron Safety and

Regulatory Compliance Guide, part number 68-290-01, on the Extron

website, www.extron.com.

Sicherheitsanweisungen • Deutsch

WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer darauf

aufmerksam machen, dass im Inneren des Gehäuses dieses Produktes

gefährliche Spannungen herrschen, die nicht isoliert sind und die einen

elektrischen Schlag verursachen können.

VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in

der im Lieferumfang enthaltenen Dokumentation besonders wichtige

Hinweise zur Bedienung und Wartung (Instandhaltung) geben.

Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,

EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in

den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer

68-290-01) auf der Extron-Website, www.extron.com.

Instrucciones de seguridad • Español

ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,

avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del

producto, lo que puede representar un riesgo de descarga eléctrica.

ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa

al usuario de la presencia de importantes instrucciones de uso y

mantenimiento recogidas en la documentación proporcionada con el

equipo.

Para obtener información sobre directrices de seguridad, cumplimiento

de normativas, compatibilidad electromagnética, accesibilidad y temas

relacionados, consulte la Guía de cumplimiento de normativas y seguridad

de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.

Instructions de sécurité • Français

AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le

produit, signale à l’utilisateur la présence à l’intérieur du boîtier du

produit d’une tension électrique dangereuse susceptible de provoquer

un choc électrique.

ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,

signale à l’utilisateur des instructions d’utilisation ou de maintenance

importantes qui se trouvent dans la documentation fournie avec le

matériel.

Pour en savoir plus sur les règles de sécurité, la conformité à la

réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets

connexes, lisez les informations de sécurité et de conformité Extron, réf.

68-290-01, sur le site Extron, www.extron.com.

Istruzioni di sicurezza • Italiano

AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad

avvertire l’utente della presenza di tensione non isolata pericolosa

all’interno del contenitore del prodotto che può costituire un rischio di

scosse elettriche.

ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad avvertire

l’utente della presenza di importanti istruzioni di funzionamento e

manutenzione nella documentazione fornita con l’apparecchio.

Per informazioni su parametri di sicurezza, conformità alle normative,

compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento

alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo

68-290-01, sul sito web di Extron, www.extron.com.



Trademarks

All trademarks mentioned in this guide are the properties of their respective owners.

The following registered trademarks (

), registered service marks (

), and trademarks (

) are the property of RGBSystems, Inc. or

ExtronElectronics (see the current list of trademarks on the Terms of Use page at www.extron.com):

Registered Trademarks

(

)

Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, Glitch Free. Global

Configurator, GlobalScripter, GlobalViewer, Hideaway, HyperLane, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt, MediaLink,

MediaPort, NetPA, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, Show Me, SoundField, SpeedMount, SpeedSwitch,

StudioStation, SystemINTEGRATOR, TeamWork, TouchLink, V-Lock, VideoLounge, VN-Matrix, VoiceLift, WallVault, WindoWall, XTP,

XTPSystems, and ZipClip

Registered Service Mark

(SM)

: S3 Service Support Solutions

Trademarks

(

™

)

Contents

Introduction ...............................................1

About this Guide .................................................. 1

Features .............................................................. 2

Application Example ............................................ 3

Installation .................................................4

Mounting Instructions .......................................... 4

Installing the Wallplate on a Non-masonry

Wall ................................................................ 5

Installing the Wallplate on a Masonry Wall ........ 7

Attaching the SB 33 A to the Wallplate ............ 9

Mounting a Camera ....................................... 11

SMK V SB 33 VESA Mounting Kit ...................... 20

Installation ..................................................... 20

Aligning the SB 33 Speaker to the Display ..... 26

Operation .................................................27

SB 33 A Internal Ampliﬁer Front Panel (inside

right speaker module) ....................................... 27

Internal Adjustments .......................................... 31

Setting Bass and Treble ................................. 31

Reference Information ............................. 32

Defeating the Auto Power-down Timer .............. 32

Troubleshooting ................................................. 35

Amplifier Fails to Exit Standby Mode

Promptly ....................................................... 35

Amplifier Enters Standby Mode Too Early ....... 35

SB 33 A Series User Guide • Contents vii

SB 33 A Series User Guide • Contents viii

Introduction

This section gives an overview of the Extron SB 33 A Series Sound Bar Speaker. Topics

include:

• About this Guide

• Overview

• Features

• Application Examples

About this Guide

This guide describes the installation and set up of the SB 33 A Series Speaker.

NOTE: Observe all applicable building codes and local ordinances when installing the

SB 33 A speaker.

In this guide, the terms “speaker” and “sound bar” are used interchangeably to refer to the

SB 33 A Series Sound Bar Speaker.

Product Description

The SB 33 A is an adjustable-width sound bar speaker for use in small-to-medium

conference rooms. It will feature two 3" full range speaker speaker drivers, driven by an

internal amplifier module. The SB 33 A speaker accepts balanced and unbalanced stereo

input signals on three individually buffered inputs.

The SB 33 A is configurable for use with an internal webcam using the built-in adjustable

shelf and window with a built-in door. It can also be configured to mount a PTZ camera with

optional shelf, or configured for no camera with the optional blank center grille. The SB 33 A

sound bar enclosure is adjustable to match the width of the display and is mounted under

the display. The SB 33 A will be offered in four different sizes to accommodate screen sizes

from 46" to 80", as shown in the table below.

Option Fit Display Size (diagonal) Fit Display Width Speaker Module Width

SB 33 A 46-55 46" — 55" 40" — 49" (101.6 cm — 124.5 cm) 16.25" (41.3 cm)

SB 33 A 55-65 55" — 65" 48" — 57" (121.9 cm — 144.8 cm) 20.25" (51.4 cm)

SB 33 A 65-70 65" — 70" 56" — 65" (142.2 cm — 165.1 cm) 24.25" (61.6 cm)

SB 33 A 75-80 75" — 80" 64" — 73" (162.6 cm — 185.4 cm) 28.25" (71.8 cm)

Figure 1. SB 33 A Series Table

SB 33 A Series User Guide • Introduction 1

40"- 49"

SB 33 A 46-55

48"- 57"

SB 33 A 55-65

56"- 65"

SB 33 A 65-70

64"- 73"

SB 33 A 75-80

Figure 2. SB 33 A Series Model Options

The SB 33 A supports mounting directly to the wall under the display using the included

wallplate. It can also be attached to an articulating display mount using the optional VESA

mounting kit.

Features

• Provides enhanced audio quality for collaboration spaces

• Adjustable width to match the display — Perfectly matches the width of any display

from 46” to 80”

• Configurable for an internal webcam, a PTZ camera, or no camera — Suitable

for self-contained huddle spaces or video conference rooms

• 3” (76 mm) full-range drivers with a tuned port for bass extension — Optimized

for collaboration applications

• Frequency range: 100 Hz to 20 kHz

• Internal Extron ENERGY STAR qualified Class D amplifier — High performance

stereo amplifier with CDRS, automatic clip limiter, and auto power-down with fast

power-up

• Compatible with VCM series volume and mute controllers — Can be used

without a control system

• Compatible with select MLC controllers that include VCM volume and mute

ports

• Internal level, bass, and treble adjustments — Once set, these controls are hidden

and protected from tampering

• Optional VESA mounting kit

• ADA compliant when used with the included wall bracket — Protrudes less than

four inches from the wall

SB 33 A Series User Guide • Introduction 2

Application Example

The following diagram shows a typical SB 33 A Series installation.

Extron

ANT A ANT B

ShareLink 250 W

1 2

USB

HCR 102

CONFIG

SIGNAL

HDCP

LPCM-2CH

MULTI-CH

INPUT AUDIO

ENTER

HOLD FOR 72 0p/1080p

HCT 103

INPUTS

2 3 4

SIGNAL

HDCP

3 4

Extron

ShareLink 250 W

Wireless Collaboration

Gateway

Extron

HC 404

Receiver

Extron

HC 404

Transmitter

Laptop Laptop

CATx Cable

up to 230' (70m)

HDMI

HDMI/CEC

HDMIHDMI

Laptop

VGA

Analog Audio

55'' Display

Extron

SB 33 A 55-65

Sound Bar

Figure 3. An Example of a SB 33 A System Installation

SB 33 A Series User Guide • Introduction 2

Installation

Topics covered in this section of the guide include the following:

• Installation Overview

• Mounting Instructions

• SMK V SB 33 VESA Mounting Kit

Installation Overview

The installation of the SB 33 A speaker includes using the included wallplate to mark the

wall where the SB 33 A will be mounted. After the wallplate is attached to the wall the

SB 33 A is then attached to the wallplate. The following section describes the mounting

procedure for safely and securely mounting the speaker.

NOTE: Install the wallplate onto wall material using common installation methods with

applicable hardware dictated per local building code.

Mounting Instructions

WARNING: Risk of personal injury or property damage. The final installation

should be able to continuously support the speaker weight. The final installation

should also be able to support any short term overloading. Since applications can

vary considerably, it is assumed that the installer will exercise good judgment when

selecting the mounting location, method, and hardware. Installation and service must

be performed by authorized personnel only.

AVERTISSEMENT : Risque de dommages corporels ou matériels.

L’installation ﬁnale doit pouvoir supporter en permanence le poids de l’enceinte.

L’installation ﬁnale doit également supporter toute surcharge temporaire. Étant donné

la possibilité d’évolution considérable des applications, il est supposé que l’installateur

fera preuve de discernement lors de la sélection de l’emplacement, du mode, et

du matériel de montage. L’installation et la maintenance du système doivent être

exclusivement effectuées par le personnel autorisé.

NOTE: Observe all applicable building codes and local ordinances when installing the

SB 33 A speaker.

SB 33 A Series User Guide • Installation 4

Installing the Wallplate on a Non-masonry Wall

NOTE: When attaching the wallplate to masonry, see Installing the Wallplate on a

Masonry Wall in the following section.

1. Position and level the included wallplate (see figure 4) under the display screen (see

figure 5) and mark the locations of the wall studs through the top vertical slots and

bottom horizontal slots where screws (not included) will secure the SB 33 A speaker

wallplate to the wall.

NOTES:

• If the wallplate cannot be attached to two studs, the wallplate can be offset

such that one side of the wallplate can be attached to one stud and the other

end of the wallplate can be attached to the wall using two (not included)

1/4" Kap Toggles. If the stud must come down the middle of the wallplate,

secure the wallplate to the stud using two screws and to the wall using two

(not included) 1/4" Kap Toggles (one on the leftmost top slot and one on the

rightmost top slot)

• The center of the wallplate does not need to be precisely aligned with the

center of the display above it because the speaker module on either end of the

wallplate can be adjusted on the wallplate.

2. If necessary, cut a hole in the wall to route cables to the SB 33 A speaker.

Figure 4. Positioning the Wallplate

Display

Left Speaker ModuleCenter

Bracket

Right Speaker Module

Figure 5. Display Screen and SB 33 A Alignment

NOTE: Assuming that the display screen is level, allow for some space between

the bottom of the display screen and the top of the speaker because the speaker

assemblies and the center bracket attach to the wallplate by hooking the top

mounting clasps of the speaker assemblies and center bracket over the top

mounting rail of the wall plate.

SB 33 A Series User Guide • Installation 5

NOTE: To allow sufficient clearance between the top of the SB 33 A and the display

screen above it, allow for at least a minimum clearance of 11/16 inches (17.5 mm)

between the highest part of the top rail of the wallplate and the top of the speaker,

as shown below. The display screen should not encroach into this area above the

top rail.

INPUTS

POWER

MAX

12V

0.7A

OUTPUT

REMOTE

LEVEL BASS TREBLE

10V 50mA

CLASS 2 WIRING

L SPEAKER

Wallplate

Side View

11/16"

(17.5 mm)

Wall

Minimum clearance between top of wallplate

and bottom of display is 11/16" (17.5 mm).

Figure 6. Positioning the Wallplate

3. Before starting the installation, remove the center section assembly from the packaging

and disassemble as indicated in the following order:

Screws (2)

Grille

Center Section Cover

Lock Washers (2)

Center Bracket

Screws (2)

Web Camera

Mount

Grille Hoo

Figure 7. Disassembling the Center Section Assembly

SB 33 A Series User Guide • Installation 6

a. The front grille from the center section cover using a grille hook.

b. The center section cover from the center bracket standoffs by removing the 2

screws

c. The web camera mount from the center bracket (if necessary) by removing the two

screws and lock washers that attach it to the center bracket.

4. Drill four pilot holes through the marked locations on the wall.

5. Screw the wallplate to the wall studs using four #14 x 1 3/4" self-tapping wood or

metal screws and four 1/4" SAE washers into the pilot holes.

NOTE: Use wood or metal screws depending on whether the studs are wood or

metal.

Wall Stud

Wallplate

1/4" SAE Washer (x4)

#14 x 1 3/4" Self-tapping

Metal/Wood Screws (x4)

Figure 8. Attach the Wallplate to Studs

Installing the Wallplate on a Masonry Wall

Mount the wallplate on a brick, stone, or concrete wall by doing the following:

NOTE: The center of the wallplate does not need to be precisely aligned with the

center of the display above it because the speakers on either end of the wallplate

may still be adjustable on the wallplate.

1. Follow steps 1 to 3 of Installing the wallplate on a non-masonry wall on page 5.

NOTE: Because masonry installation does not involve wall studs, position the

wallplate so that the mounting holes will evenly distribute the weight of the

SB 33 A.

SB 33 A Series User Guide • Installation 7

2. Using a masonry drill bit, drill four pilot holes in the masonry wall at the locations you

marked in step one.

NOTE: If you drill the pilot hole too shallow, the screw head might break off while

it is being fastened into the hole.

Mounting Holes

Wallplate

Figure 9. Positioning the Wallplate on Masonry

3. For each pilot mounting hole:

a. Insert a 1/4" x 1 3/4" masonry screw through a 1/4" SAE washer.

b. Position the wallplate over the pilot holes

c. Insert each screw and washer through the wallplate and into the pilot hole.

Wallplate

1/4" SAE Washer (x4)

1/4" x 1 3/4"

Masonry Screws (x4)

Figure 10. Attaching the Wallplate to Masonry

d. Securely tighten the four screws to the wallplate.

SB 33 A Series User Guide • Installation 8

Attaching the SB 33 A to the Wallplate

ATTENTION:

• When attaching either speaker assembly or the center section to the wallplate, avoid

damaging or scratching the speaker assembly and center section cover.

• Lorsque vous xez les enceintes ou la section centrale à la plaque murale, prenez garde

à ne pas endommager ni à rayer les enceintes et le couvercle de la section centrale.

1. Hook the top clasp edge of the left speaker assembly over the top rail 1 in figure 11 of

the wallplate and slide it to left end of the wallplate 2 so that the left end of the speaker

assembly is aligned with the left end of the display.

Tighten the 2 set screws 3 on the bottom of the left speaker assembly to the bottom

rail of the wallplate.

Wallplate

Screws (2)

Left Speaker

DISPLAY

Left Speaker

Wallplate

Side View Side ViewFront View

Wall Wall

Figure 11. Attaching the Left Speaker to the Wallplate

2. Hook the top clasp edge of the right speaker assembly over the top rail 1 in figure 12

of the wallplate and slide it to right end of the wallplate 2 so that the right end of the

speaker assembly is aligned with the right end of the display.

Tighten the 2 set screws 3 on the bottom of the right speaker assembly to the bottom

rail of the wallplate.

INPUTS

POWER

MAX

12V

0.7A

OUTPUT

REMOTE

LEVEL BASS TREBLE

10V 50mA

CLASS 2 WIRING

L SPEAKER

INPUTS

POWER

MAX

12V

OUTPUT

REMOTE

LEVEL

BASS TREBLE

C G

10V 50mA

CLASS 2 WIRING

L SPEAKER

Side View Side ViewFront View

Screws (2

)

Right Speaker

Wallplate

DISPLAY

Wall

Wallplate

Right Speaker

Figure 12. Attaching the Right Speaker to the Wallplate

SB 33 A Series User Guide • Installation 9

3. Route the supplied power cable from the power supply in the left speaker enclosure to

the power input connector of the amplifier in the right speaker enclosure.

INPUTS

POWER

MAX

12V

0.7A

OUTPUT

REMOTE

LEVEL BASSTREBLE

10V 50mA

CLASS 2 WIRING

L SPEAKER

POWER

12V

0.7A MAX

Left Speaker Module

Power Supply

Right Speaker Module

Ampliﬁer

DC Power

Input

DC Power Cord

Captive Screw

Connectors

Tie

Wraps

DC Power

Outputs

Figure 13. Power Supply to Amplifier Cable Routing

ATTENTION:

• Always use a power supply supplied by or specied by Extron. Use of an

unauthorized power supply voids all regulatory compliance certication and may

cause damage to the supply and the end product.

• L’utilisation d’une source d’alimentation non autorisée annule toute certication de

conformité réglementaire, et peut endommager la source d’alimentation et l’unité.

• The installation shall be in accordance with the applicable provisions of National

Electrical Code ANSI/NFPA 70, article 725 and the Canadian Electrical Code part1,

section 16.

• Cette installation doit toujours être conforme aux dispositions applicables du Code

américain de l’électricité (National Electrical Code) ANSI/NFPA 70, article 725, et du

Code canadien de l’électricité, partie 1, section 16.

• The length of the exposed wires in the stripping process is critical. The ideal length

is 3/16 inches (5 mm). Any longer and the exposed wires may touch, causing a short

circuit between them. Any shorter and the wires can be easily pulled out even if

tightly fastened by the captive screws.

• La longueur des câbles exposés est primordiale lorsque l’on entreprend de les

dénuder. La longueur idéale est de

5 mm (3/16 inches). S’ils sont trop longs, les câbles exposés pourraient se toucher

et provoquer un court-circuit. S’ils sont trop courts, ils peuvent être tirés facilement,

même s’ils sont correctement serrés par les borniers à vis.

NOTE: Do not tin the wires. Tinned wire does not hold its shape and can become loose

over time.

SB 33 A Series User Guide • Installation 10

4. Route the supplied speaker cable from the left speaker module to the left speaker

output of the amplifier (

), as shown below.

INPUTS

OUTPUT

LEVEL BASS TREBLE

10V 5

CLASS 2 WIRING

L SPEAKER

INPUTS

WER

MAX

LEVEL

Right Speaker Ampliﬁer

Side View

Front View

Ampliﬁer

Audio Input

Connectors

Speaker Cable

Left Speaker Cable

Output

Speaker Cable

Power Cable

Figure 14. Left Speaker Cable Routing

5. Hook the top clasp edge of the center bracket over the top rail (

) of the wallplate and

slide it to center of the display.

POWER

12V

0.7A MAX

INP

Screws (2)

Wallplate

Center Bracket

Side View

Wall

Figure 15. Center Bracket to Wallplate Installation

Tighten the two set screws (

) on the bottom of the center bracket to the bottom rail of

the wallplate.

NOTE: If a camera is to be mounted to the center bracket, see Mounting a

Camera before proceeding to the next step.

Mounting a Camera

The SB 33 A speaker can accommodate a camera mounted to the center bracket. A

small webcam can be mounted behind the center cover, and a larger PTZ camera can be

mounted in front of the center cover using an optional PTZ camera shelf.

NOTE: If mounting a PTZ Camera, please go to Mounting a PTZ Camera wiith

optional PTZ camera shelf section. Both the webcam camera shelf and the PTZ

camera shelf use the same two attaching screws and lock washers.

SB 33 A Series User Guide • Installation 11

Camera mounting behind the front cover

A webcam can be installed using the included webcam shelf.

1. Install the webcam shelf by attaching it to the center bracket using 2 screws going

through the 2 vertical slots on the shelf and into two mounting holes in the bracket.

There are 2 pairs of available holes in the bracket. The shelf height can be adjusted by

positioning the screws in the shelf slots 1.

NOTE: For cameras that require more overhead clearance, the webcam shelf can

be inverted (see Option 2 below right).

POWER

12V

0.7A MAX

INP

Screws (2)

Lock Washers (2)

Web Camera

Mount

Center

Bracket

Option 2

Figure 16. Inverting the Webcam Shelf

2. A screw is inserted in the bottom slot of the shelf 2 to secure the webcam.

POWER

12V

0.7A MAX

INP

Screw

Webcam

Figure 17. Securing the Webcam to Shelf

3. See Attaching Power and Audio Sources to the SB 33 A on page 15 to continue

the installation.

SB 33 A Series User Guide • Installation 12

Mounting a PTZ camera with optional PTZ camera shelf

A larger PTZ camera that takes up more space can be installed in front of the front cover

using the optional PTZ camera shelf. Follow the steps below.

ATTENTION:

• The PTZ camera cannot exceed 4 lbs. (1.81 kg).

• La caméra PTZ ne peut peser plus de 1,81 kg (4 lb).

POWER

12V

0.7A MAX

INP

PTZ Camera

Figure 18. PTZ Camera on PTZ Camera Shelf

1. Install the PTZ camera shelf by attaching it to the center bracket using two screws and

lock washers going through the vertical slots on the shelf and into two mounting holes

in the bracket. There are two pairs of available holes in the bracket. The shelf height

can be adjusted by positioning the screws in the shelf slots.

POWER

12V

0.7A MAX

INP

POWER

12V

0.7A MAX

INP

Screws (2)

PTZ Camera Shelf

Center

Bracket

Lock Washers (2)

Figure 19. Attaching the PTZ Camera Shelf

SB 33 A Series User Guide • Installation 13

2. To install a PTZ camera, follow the steps below:

POWER

12V

0.7A MAX

Cable

Tie-off

Point

Zip Tie

PTZ Cables

Figure 20. Routing the PTZ Camera Cable

a. Route the PTZ cable to the PTZ camera through the center section cover (

) and

along a center bracket cable tie-off point (

b. Route the cable to the camera shelf (

c. Route the cable through the access hole at the rear of the camera shelf (

3. See Attaching Power and Audio Sources to the SB 33 A on page 15 before

continuing with the next steps.

4. If the optional blank grille is being installed, see Attaching the optional blank grille on

page 19.

5. Slide the center section cover over the center bracket and attach the two cover screws

to the center bracket standoffs being careful not to overtighten the screws.

POWER

12V

0.7A MAX

INP

Screws (2)

Grille

Center Section Cover

Center Bracket

Standoff

Grille Hoo

Figure 21. Attaching the Center Section Cover

SB 33 A Series User Guide • Installation 14

6. Attach the grille to the center section cover. See the illustration above.

NOTE: Two grille hooks are included to facilitate grill removal while avoiding damage

to the grille. It is best to insert the hook along the top or bottom outer edge of the

grille, as shown above.

7. Route the cable to the PTZ camera (

) and attach it to the camera. See the figure

below.

8. Place the camera on the shelf and attach it to the shelf with the mounting screw (

See the figure below.

POWER

12V

0.7A MAX

PTZ Camera

Screw

PTZ Cables

Final View

Figure 22. Attaching the PTZ Camera to the Shelf

Attaching Power and Audio Sources to the SB 33 A

The SB 33 A has a power supply for the amplifier housed in the left speaker enclosure. The

power supply has an AC power input connector (

) and a DC power output connector (

)

that routes power to the amplifier. See the illustration below.

Left Speaker/Power Supply

(Side View)

AABB

Figure 23. AC Input and DC Output Power Connectors

This section describes how the power and audio sources are attached to the SB 33 A, as

shown in the following steps.

SB 33 A Series User Guide • Installation 15

La page charge ...

Extron SMK V SB 33 Manuel utilisateur

Marque: Extron

Modèle: SMK V SB 33

Catégorie: Amplificateurs audio

Taper: Manuel utilisateur

Ce manuel convient également à

Sound Bar Speaker

Télécharger le PDF

rapport

dans d''autres langues

English: Extron SMK V SB 33 User manual

Documents connexes

Autres documents

SMK-Link VP6156 Manuel utilisateur