LG 55EG9200 Le manuel du propriétaire

OWNER’S MANUAL

www.lg.com

P/NO : MFL68680223 (1510-REV01)

55EG9600

65EG9600

55EF9500

65EF9500

55EG9200

*MFL68680223*

Please read this manual carefully before operating your set and retain it

for future reference.

ENG

ENGLISH

2

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance

of your product.



Do not use this apparatus near water.

Short-circuit

Breaker

Power Supply



Clean only with dry cloth.

Short-circuit

Breaker

Power Supply



Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Short-circuit

Breaker

Power Supply



Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

Short-circuit

Breaker

Power Supply



Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

Short-circuit

Breaker

Power Supply

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO

NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO QUALIFIED SERVICE PERSONNEL.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead

symbol within an equilateral triangle is

intended to alert the user to the

presence of uninsulated dangerous voltage

within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of

electric shock to persons.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The exclamation point within an

equilateral triangle is intended to alert

the user to the presence of important

operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC

SHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may

be seriously injured or there is a possibility of

accident or death.

CAUTION

If you ignore the caution message, you may

be slightly injured or the product may be

damaged.

NOTE

The note helps you understand and use the

product safely. Please read the note carefully

before using the product.

Short-circuit

Breaker

Power Supply

ENGENGLISH

3

IMPORTANT SAFETY INSTRUCTIONS



Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

Short-circuit

Breaker

Power Supply



Only use attachments/accessories specified by

the manufacturer.

Short-circuit

Breaker

Power Supply



Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

Short-circuit

Breaker

Power Supply



Unplug this apparatus during lightning storms

or when unused for long periods of time.

Short-circuit

Breaker

Power Supply



Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way, such

as power-supply cord or plug is damaged,

liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate

normally, or has been dropped.

Short-circuit

Breaker

Power Supply



Do not press strongly upon the panel with a

hand or a sharp object such as a nail, pencil, or

pen, or make a scratch on it.

Short-circuit

Breaker

Power Supply



Do not stick metal objects or any other

conductive material into the power cord. Do

not touch the end of the power cord while it is

plugged in.



Keep the packing anti-moisture material or

vinyl packing out of the reach of children. Anti-

moisture material is harmful if swallowed. If

swallowed, force the patient to vomit and visit

the nearest hospital. Additionally, vinyl packing

can cause suffocation. Keep it out of the reach

of children.



CAUTION concerning the Power Cord

(Can differ by country):

Check the specification page of this owner’s

manual to be certain. Do not connect too many

appliances to the same AC power outlet as this

could result in fire or electric shock. Do not

overload wall outlets. Overloaded wall outlets,

loose or damaged wall outlets, extension

cords, frayed power cords, or damaged or

cracked wire insulation are dangerous. Any

of these conditions could result in electric

shock or fire. Periodically examine the cord

of your appliance, and if its appearance

indicates damage or deterioration, unplug it,

discontinue use of the appliance, and have the

cord replaced with an exact replacement part

by an authorized service. Protect the power

cord from physical or mechanical abuse, such

as being twisted, kinked, pinched, closed in a

door, or walked upon. Pay particular attention

to plugs, wall outlets, and the point where the

cord exits the appliance. Do not move the TV

with the power cord plugged in. Do not use

a damaged or loose power cord. Be sure do

grasp the plug when unplugging the power

cord. Do not pull on the power cord to unplug

the TV.

Short-circuit

Breaker

Power Supply



Warning - To reduce the risk of fire or electrical

shock, do not expose this product to rain,

moisture or other liquids. Do not touch the

TV with wet hands. Do not install this product

near flammable objects such as gasoline

or candles, or expose the TV to direct air

conditioning.

Short-circuit

Breaker

Power Supply

ENG

ENGLISH

4

IMPORTANT SAFETY INSTRUCTIONS



Do not expose to dripping or splashing and do not

place objects filled with liquids, such as vases, cups,

etc. on or over the apparatus (e.g., on shelves above

the unit).

Short-circuit

Breaker

Power Supply



Grounding

(Except for devices which are not grounded.)

Ensure that you connect the earth ground wire

to prevent possible electric shock (i.e., a TV with a

three-prong grounded AC plug must be connected

to a three-prong grounded AC outlet). If grounding

methods are not possible, have a qualified

electrician install a separate circuit breaker. Do not

try to ground the unit by connecting it to telephone

wires, lightning rods, or gas pipes.

Short-circuit

Breaker

Power Supply



As long as this unit is connected to the AC wall

outlet, it is not disconnected from the AC power

source even if the unit is turned off.



Do not attempt to modify this product in any way

without written authorization from LG Electronics.

Unauthorized modification could void the user’s

authority to operate this product.



Outdoor Antenna Grounding

(Can differ by country):

If an outdoor antenna is installed, follow the

precautions below. An outdoor antenna system

should not be located in the vicinity of overhead

power lines or other electric light or power circuits,

or where it can come in contact with such power

lines or circuits as death or serious injury can

occur. Be sure the antenna system is grounded to

provide some protection against voltage surges

and built-up static charges. Section 810 of the

National Electrical Code (NEC) in the U.S.A. provides

information with respect to proper grounding of

the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge unit,

size of grounding conductors, location of antenna

discharge unit, connection to grounding electrodes,

and requirements for the grounding electrode.

Antenna grounding according to the National

Electrical Code, ANSI/NFPA 70

Short-circuit

Breaker

Power Supply

Ground Clamp

Grounding Conductor

(NEC Section 810-21)

Antenna Lead in Wire

Electric Service

Equipment

Antenna Discharge Unit

(NEC Section 810-20)

Ground Clamp

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

NEC: National Electrical Code



Cleaning

When cleaning, unplug the power cord and wipe

gently with a soft cloth to prevent scratching. Do

not spray water or other liquids directly on the

TV as electric shock may occur. Do not clean with

chemicals such as alcohol, thinners, or benzene.



Moving

Make sure the product is turned off, unplugged and

all cables have been removed. It may take 2 or more

people to carry larger TVs. Do not press or put stress

on the front panel of the TV.



Ventilation

Install your TV where there is proper ventilation.

Do not install in a confined space such as a

bookcase. Do not cover the product with cloth or

other materials while plugged in. Do not install in

excessively dusty places.



If you smell smoke or other odors coming from

the TV, unplug the power cord and contact an

authorized service center.



Keep the product away from direct sunlight.



Never touch this apparatus or antenna during a

thunder or lightning storm.



When mounting a TV on the wall, make sure not

to install the TV by hanging the power and signal

cables on the back of the TV.



Do not allow an impact shock or any objects to fall

into the product, and do not drop anything onto

the screen.



DISCONNECTING THE DEVICE FROM THE MAIN

POWER

The power plug is the disconnecting device. In

case of an emergency, the Power Plug must remain

readily accessible.



Batteries

Store the accessories (battery, etc.) in a safe location

out of the reach of children.



This apparatus uses batteries. In your community

there might be regulations that require you

to dispose of these batteries properly due to

environmental considerations. Please contact

your local authorities for disposal or recycling

information.



Do not dispose of batteries in a fire.



Do not short circuit, disassemble or allow the

batteries to overheat.



Do not use high voltage electrical equipment

near the TV, (e.g., a bug zapper). This may result in

product malfunction.



Dot Defect

The panel is a high technology product with

resolution of two million to six million pixels.

In a very few cases, you could see fine dots on

the screen while you’re viewing the TV. Those

ENGENGLISH

5

IMPORTANT SAFETY INSTRUCTIONS

dots are deactivated pixels and do not affect the

performance and reliability of the TV.



Generated Sound

Cracking noise A cracking noise that occurs when

watching or turning off the TV is generated by

plastic thermal contraction due to temperature and

humidity. This noise is common for products where

thermal deformation is required.

Electrical circuit humming/panel buzzing A

low level noise is generated from a high-speed

switching circuit, which supplies a large amount of

current to operate a product. It varies depending

upon the product.

This generated sound does not affect the

performance and reliability of the product.



Take care not to touch the ventilation openings.

When watching the TV for a long period, the

ventilation openings may become hot. This does

not affect the performance of the product or cause

defects in the product.



Do not install this product on a wall if it could be

exposed to oil or oil mist. This may damage the

product and cause it to fall.



If the TV feels cold to the touch, there may be a

small flicker when it is turned on. This is normal,

there is nothing wrong with TV. Some minute dot

defects may be visible on the screen, appearing

as tiny red, green, or blue spots. However, they

have no adverse effect on the TV’s performance.

Avoid touching the screen or holding your finger(s)

against it for long periods of time. Doing so may

produce some temporary distortion effects on the

screen.



Displaying a still image for a prolonged period of

time may cause an image sticking. Avoid displaying

a fixed image on the TV screen for a extended

length of time.

FCC Notice

(For USA)

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment

and the receiver.

- Connect the equipment to an outlet on a circuit

different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV

technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and

(2) this device must accept any interference received,

including interference that may cause undesired

operation of the device.

Any changes or modifications in construction of this

device which are not expressly approved by the party

responsible for compliance could void the user’s

authority to operate the equipment.

ENG

ENGLISH

6

IMPORTANT SAFETY INSTRUCTIONS

FCC Radio Frequency Interference

Requirements (for UNII devices)

High power radars are allocated as primary users

of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands.

These radar stations can cause interference with and/

or damage this device. This device cannot be co-

located with any other transmitter.

FCC RF Radiation Exposure Statement

[For having wireless function (WLAN, Bluetooth,...)]

This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment. This

transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

This equipment should be installed and operated with

minimum distance 20 cm (7.8 inches) between the

antenna and your body. Users must follow the specific

operating instructions for satisfying RF exposure

compliance.

Industry Canada Statement

(For Canada)

[For having wireless function (WLAN, Bluetooth,...)]

This device complies with RSS-210 of the Industry

Canada Rules. Operation is subject to the following

two conditions:

1. This device may not cause interference and

2. This device must accept any interference, including

interference that may cause undesired operation of

the device.

IC Radiation Exposure Statement

(For Canada)

[For having wireless function (WLAN, Bluetooth,...)]

This equipment complies with IC radiation exposure

limits set forth for an uncontrolled environment. This

equipment should be installed and operated with

minimum distance 20 cm (7.8 inches) between the

antenna and your body.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE

FOR ANY RADIO OR TV INTERFERENCE CAUSED

BY UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE

USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

WARNING

(For Canada)

[For product having the wireless function using

5 GHz frequency bands]



The device for operation in the band 5150–

5250 MHz is only for indoor use to reduce

the potential for harmful interference to co-

channel mobile satellite systems;



The maximum antenna gain permitted for

devices in the bands 5250–5350 MHz and

5470–5725 MHz shall comply with the EIRP

limit; and



The maximum antenna gain permitted for

devices in the band 5725–5825 MHz shall

comply with the EIRP limits specified for point-

to-point and non point-to-point operation as

appropriate.



High-power radars are allocated as primary

users (i.e., priority users) of the bands 5250–

5350 MHz and 5650–5850 MHz and that

these radars could cause interference and/or

damage to LE-LAN devices.

Note to Cable/TV Installer

(For USA and Canada)

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the National

Electric Code (U.S.A.). The code provides guidelines

for proper grounding and, in particular, specifies

that the cable ground shall be connected to the

grounding system of the building, as close to the

point of the cable entry as practical.

ENGENGLISH

7

IMPORTANT SAFETY INSTRUCTIONS

Viewing 3D Imaging

WARNING

Viewing Environment



Viewing Time

-

When watching 3D contents, take five- to

fifteen-minute breaks every hour. Viewing 3D

contents for a long period of time may cause

headache, dizziness, fatigue, or eye strain.

Those that have a photosensitive seizure or

chronic illness



Some users may experience a seizure or other

abnormal symptoms when they are exposed

to a flashing light or particular pattern from

3D contents.



Do not watch 3D videos if you feel nausea, are

pregnant and/ or have a chronic illness such

as epilepsy, cardiac disorder, or blood pressure

disease, etc.



3D Contents are not recommended for those

who suffer from stereo blindness or stereo

anomaly. Double images or discomfort in

viewing may be experienced.



If you have strabismus (cross-eyed), amblyopia

(weak eyesight), or astigmatism, you may have

trouble sensing depth and easily feel fatigue

due to double images. It is advised to take

frequent breaks than the average adult.



If your eyesight varies between your right

and left eye, correct your eyesight prior to

watching 3D contents.

Symptoms which require discontinuation or

refraining from watching 3D contents



Do not watch 3D contents when you feel

fatigue from lack of sleep, overwork or

drinking.



When these symptoms are experienced, stop

using/watching 3D contents and get enough

rest until the symptom subsides.

- Consult your doctor when the symptoms

persist. Symptoms may include headache,

eyeball pain, dizziness, nausea, palpitation,

blurriness, discomfort, double image,

eyestrain, or fatigue.

CAUTION

Viewing Environment



Viewing Distance

-

Maintain a distance of at least twice the screen

diagonal length when watching 3D contents.

If you feel discomfort in viewing 3D contents,

move further away from the TV.

Viewing Age



Infants / Children

- Usage/ Viewing 3D contents for children under

the age of 5 is not recommended.

- Children under the age of 10 may overreact

and become overly excited because their vision

is in development, for example, trying to touch

the screen or trying to jump into it. Special

monitoring and extra attention is required for

children watching 3D contents.

- Children have greater binocular disparity of 3D

presentations than adults because the distance

between the eyes is shorter than one of adults.

Therefore they will perceive more stereoscopic

depth compared to adults for the same 3D

image.



Teenagers

- Teenagers may be stimulated by light coming

from 3D videos. Advise them not to watch 3D

videos for a long time when they are tired.



Elderly

- The elderly may perceive less of a 3D effect

than the youth. Do not sit closer to the TV

than the recommended distance.

Cautions when using the 3D glasses



Make sure to use LG 3D glasses. Otherwise,

you may not be able to view 3D videos

properly.



Do not use 3D glasses instead of your normal

glasses, sunglasses, or protective goggles.



Using modified 3D glasses may cause eye

strain or image distortion.



Do not keep your 3D glasses in extremely high

or low temperatures. It will cause deformation.



The 3D glasses are fragile and are easily

scratched. Always use a soft, clean piece of cloth

when wiping the lenses. Do not scratch the

lenses of the 3D glasses with sharp objects or

clean/wipe them with chemicals.

ENG

ENGLISH

8

LICENSES / OPEN SOURCE SOFTWARE NOTICE INFORMATION

LICENSES

Supported licenses may differ by model.

For more information about licenses, visit

www.lg.com

.

OPEN SOURCE SOFTWARE NOTICE INFORMATION

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this

product, please visit

http://opensource.lge.com

.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are

available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of

performing such distribution (such as the cost of media, shipping, and handling) upon email request to

[email protected]om

. This offer is valid for three (3) years from the date on which you purchased the

product.

ENGENGLISH

9

TABLE OF CONTENTS

2 IMPORTANT SAFETY

INSTRUCTIONS

5 - FCC Notice

6 - Industry Canada Statement

6 - IC Radiation Exposure Statement

6 - Note to Cable/TV Installer

7 Viewing 3D Imaging

8 LICENSES

8 OPEN SOURCE SOFTWARE NOTICE

INFORMATION

9 TABLE OF CONTENTS

10 INSTALLATION PROCEDURE

10 ASSEMBLING AND PREPARING

10 Unpacking

12 Optional Extras

13 Parts and Buttons

14 - Using the Joystick button

15 Lifting and Moving the TV

16 Setting Up the TV

16 - Attaching the Stand

20 - Mounting on a Table

21 - Tidying Cables

22 - Mounting on a Wall

23 MAKING CONNECTIONS

23 Connecting to an Antenna or Cable

24 Connecting to a HD receiver, DVD Player, or

VCR

24 - HDMI Connection

25 - DVI to HDMI Connection

26 - Component Connection

27 - Composite Connection

28 Connecting to a PC

29 - HDMI Connection or DVI to HDMI

Connection

30 Connecting to an Audio System

30 - Digital Optical Audio Connection

31 Connecting Headphones

32 Connecting a USB Drive

33 MAGIC REMOTE FUNCTIONS

34 Registering Magic Remote

34 How to Use Magic Remote

34 Precautions to Take

34 USING THE USER GUIDE

35 SPECIFICATIONS

37 MAINTENANCE

37 Cleaning Your TV

37 - Screen, Frame, Cabinet, and Stand

37 - Power Cord

37 TROUBLESHOOTING

TABLE OF CONTENTS



Image shown may differ from your TV.



Your TV’s OSD (On Screen Display) may differ

slightly from that shown in this manual.



The available menus and options may differ

from the input source or product model that

you are using.



New features may be added to this TV in the

future.

NOTE

ENG

ENGLISH

10

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

INSTALLATION PROCEDURE

1

Open the package and make sure all the accessories are included.

2

Attach the stand to the TV set.

3

Connect an external device to the TV set.

4

Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

* When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may

take approximately one minute.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer

where you purchased your product. The illustrations in this manual may differ from the actual product and

item.



Do not use any unapproved items to ensure the safety and product life span.



Any damages or injuries by using unapproved items are not covered by the warranty.



In case of some model, the thin film on screen is a part of the TV, So don’t take it off.

CAUTION



The items supplied with your product may vary depending upon the model.



Product specifications or contents of this manual may be changed without prior notice due to

upgrade of product functions.



For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39

inches) thick and 18 mm (0.7 inches) width.



Use an extension cable that supports USB 2.0 if the USB cable or USB FLASH DRIVE does not fit into

your TV’s USB port.



Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen

may not display or a connection error may occur.



Recommended HDMI cable types (3 m or less)

- High-Speed HDMI

®

/

TM

cable

- High-Speed HDMI

®

/

TM

cable with Ethernet

B

A

B

*A 10 mm (0.39 inches)

*B 18 mm (0.7 inches)

NOTE

ENGENGLISH

11

ASSEMBLING AND PREPARING

P

Magic Remote,

Batteries (AA)

(See page 33.)

Owner’s Manual Cable Holder

(See page 21.)

(For 55EG9600) (For 65EG9600)

Cinema 3D Glasses

The number of 3D glasses

may differ depending upon

the model or country.

Stand Base

(See page 16, 17.)

Stand Base

(See page 17, 18.)

(For 55EF9500) (For 65EF9500)

(For 55EG9200)

Stand Base

(See page 18, 19.)

Stand Base

(See page 19, 20.)

Stand Base

(See page 16, 17.)

(For 55EG9600, 55EG9200)

Component Video Cable

(See page 26.)

Composite Video Cable

(See page 26, 27.)

Stand Screws

5 EA, M4 x L20

(See page 17.)

(For 65EG9600) (For 55EF9500) (For 65EF9500)

Stand Screws

8 EA, M4 x L20

(See page 18.)

Stand Screws

5 EA, M4 x L14

(See page 19.)

Stand Screws

8 EA, M4 x L14

(See page 20.)

ENG

ENGLISH

12

ASSEMBLING AND PREPARING

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification.

Contact your dealer for buying these items.

These devices work only with certain models.

The model name or design may be changed manufacturer’s circumstances or policies.

AN-MR6**

Magic Remote

AG-F***

Cinema 3D Glasses

AN-VC550

Smart Camera

AG-F***DP

Dual Play Glasses

LG Audio Device

ENGENGLISH

13

ASSEMBLING AND PREPARING

Parts and Buttons

1

Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2

Joystick button is located below the screen of TV.

LG Logo Light

(For EG9600, EF9500 series)

Power Indicator

(For EG9200 series)

Screen

Speakers

Joystick button

2



You can set the LG Logo Light to be on or off by selecting GENERAL in the main menus.

(Depending upon model)

NOTE

Remote Control Sensor

Intelligent Sensor

1

(Depending upon model)

ENG

ENGLISH

14

ASSEMBLING AND PREPARING

Using the Joystick button

You can operate the TV by pressing the button or moving the joystick left, right, up, or down.

Basic functions

Power On

When the TV is turned off, place your finger on the joystick button,

press it once, and release it.

Power Off

When the TV is turned on, place your finger on the joystick button,

press it once for a few seconds, and release it. All running apps will

close.

Volume

Control

Place your finger on the joystick button and move it left or right to

adjust the volume level.

Channels

Control

Place your finger on the joystick button and move it up or down to

adjust the channels.



Move the joystick button up, down, left, or right. Be careful not to press it. If you press it first, you may

not be able to adjust the volume or scroll through the channels.

NOTE

Adjusting the menu

When the TV is turned on, press the joystick button one time.

You can adjust the menu items moving the joystick button up, down, left, or right.

POWER OFF Turns the power off.

SETTINGS Accesses the quick settings.

CLOSE Clears on-screen displays and returns to TV viewing.

INPUTS Changes the input source.

ENGENGLISH

15

ASSEMBLING AND PREPARING

Lifting and Moving the TV

When moving or lifting the TV, read the following to

prevent the TV from being scratched or damaged

and for safe transportation regardless of its type and

size.



Avoid touching the screen at all times, as this

may result in damage to the screen.



Do not place the product on the floor with its

front facing down without padding. Failure to

do so may result in damage to the screen.

CAUTION



Move the TV in the box or packing material that

the TV originally came in.



Before moving or lifting the TV, disconnect the

power cord and all cables.



When holding the TV, the screen should face

away from you to avoid damage.



Hold the top and bottom of the TV frame

firmly. Make sure not to hold the transparent

part, speaker, or speaker grill area.



Use at least two people to move a large TV.



When transporting the TV by hand, hold the

TV as shown in the following illustration.



When handling the TV, be careful not to

damage the protruding joystick button.



When transporting the TV, do not expose the

TV to jolts or excessive vibration.



When transporting the TV, keep the TV

upright; never turn the TV on its side or tilt

towards the left or right.



Do not apply excessive pressure to cause

flexing / bending of frame chassis as it may

damage screen.



Be sure to keep your TV upright instead of

laying or tilting it while moving the TV.

ENG

ENGLISH

16

ASSEMBLING AND PREPARING

1

2

Setting Up the TV

You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center

or other furniture.

Attaching the Stand

If you are not mounting the TV to a wall, use the following instructions to attach the stand.



Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may

tilt forward after being installed.)



Do not tighten the screws with too much force; otherwise they may be damaged and come loose later.

CAUTION



Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

NOTE

Stand Cover

Stand Base

(For 55EG9600, 55EG9200)

Packing

Brace



When assembling the stand, lay the packing

brace on a table or product box and then

place the TV with its screen facing down

on the packing brace. Be sure to protect

the screen from scratches. When there is no

packing brace provided, make sure that you

place the screen on soft clothing or a cushion.



Do not place the TV without the stand

attached into its upright position. The

protruding Joystick Button may be damaged.

CAUTION

ENGENGLISH

17

ASSEMBLING AND PREPARING

4

3

1

2

Stand Base

Cover Holder

(For 65EG9600)

5 EA

M4 x L20

Stand Cover

Packing

Brace

1

Insert the protruding parts of the stand cover

into the holes.

2

Insert the cover holder of the stand cover into

the holes until it clicks.

3

Press the stand cover gently so that the non-

woven fabric inside is attached tightly.



When assembling the stand, lay the packing

brace on a table or product box and then

place the TV with its screen facing down

on the packing brace. Be sure to protect

the screen from scratches. When there is no

packing brace provided, make sure that you

place the screen on soft clothing or a cushion.



Do not place the TV without the stand

attached into its upright position. The

protruding Joystick Button may be damaged.

CAUTION

ENG

ENGLISH

18

ASSEMBLING AND PREPARING

4

Cover Holder

3

8 EA

M4 x L20

1

Insert the protruding parts of the stand cover

into the holes.

2

Insert the cover holder of the stand cover into

the holes until it clicks.

3

Press the stand cover gently so that the non-

woven fabric inside is attached tightly.

1

2

Stand Base

(For 55EF9500)

Stand Cover



Do not place the TV without the stand

attached into its upright position. The

protruding Joystick Button may be damaged.



Use a flat tool to remove the stand cover.

CAUTION

ENGENGLISH

19

ASSEMBLING AND PREPARING

1

Insert the protruding parts of the stand cover

into the holes.

2

Insert the cover holder of the stand cover into

the holes until it clicks.

1

2

Stand Base

(For 65EF9500)

Stand Cover



Do not place the TV without the stand

attached into its upright position. The

protruding Joystick Button may be damaged.



Use a flat tool to remove the stand cover.

CAUTION

4

3

5 EA

M4 x L14

Cover Holder

ENG

ENGLISH

20

ASSEMBLING AND PREPARING

Mounting on a Table

(Image shown may differ from your TV.)

1

Lift and tilt the TV into its upright position on a

table.

- Leave a 10 cm (4 inches) (minimum) space

from the wall for proper ventilation.

10 cm

(4 inches)

10 cm

2

Connect the power cord to a wall outlet.



Do not place the TV near or on sources

of heat, as this may result in fire or other

damage.

CAUTION

4

3

8 EA

M4 x L14

1

Insert the protruding parts of the stand cover

into the holes.

2

Insert the cover holder of the stand cover into

the holes until it clicks.

Cover Holder

La page charge ...

LG 55EG9200 Le manuel du propriétaire

Ce manuel convient également à

LG 55EG9200 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents