Thermometers TM001002 Manuel utilisateur

TM001002
Marque
Thermometers
Modèle
TM001002
Taper
Manuel utilisateur
Instruction manual
1. Product packaging and accessories:
L001-c charging base 1PCS temperature probe 1PCS type-c USB cable 1PCS
instruction 1pcs carton packaging.
2. The smart device APP shows:
1. APPle app: apple store: AICOOKING
2. Android APP ：google Store: AICOOKING
1) When installing the APP, please pay attention to allowing the software to obtain
the positioning function to ensure smooth connection. (This product is a pure
stand-alone machine with no networking function, and all data are stored locally by
customers, and our company does not store any data. )
2) Before using the relay, the APP needs to choose the relay mode, which is the direct
connection mode by default. After selecting the relay mode, the relay will directly
connect the probe Bluetooth to receive data and directly transmit it to the mobile
APP for display, but the probe can't directly connect to the mobile APP. If there is
little interference, the APP can directly choose to switch to the direct connection
mode. The probe can only be connected to one intelligent device, but after
connecting the intelligent device, it can't be connected to the relay device at the
same time. The probe can be turned off temporarily by charging function to cut off
the connection with the APP. Or close the APP or turn off bluetooth to disconnect.
3) The product has no manual shutdown function. The product automatically shuts
down when charging, turns on after disconnecting the charging, and automatically
shuts down when the power is used up. The product has its own charging protection
function, and the product can be stuck into the charging base for a long time to keep
charging. After 20 minutes of capacitor charging, the intelligent charging system will
automatically cut off the charging circuit and keep the product off.
4) After opening the APP, after turning on the positioning and Bluetooth functions,
take off the temperature measuring probe from the base, and the product will
automatically connect to the APP. If it has not been connected for a long time, the
APP has a manual connection function. Please refer to the product manual for
details.
5) The highest temperature resistance of the product temperature measuring area is
140 degrees Celsius. After the temperature exceeds 140 degrees Celsius, the
temperature measuring area must be inserted into food before it can be put into the
high temperature area (see the figure below for the correct insertion of the product
into food), and the highest temperature resistance of the product is 300 degrees
Celsius.
6) After choosing a good recipe, the APP will have an estimated completion time
when it is heated to more than 5 degrees Celsius. The countdown time will be
automatically corrected according to the heating speed of the ingredients. Stopping
the heating in the middle or changing the heating speed will change the estimated
time value. (Convenient for guests to arrange their time reasonably)
charging base: 1) Charging requires a charger with more than 5V1. It can be fully
charged after about 3 hours. (The charging red light flashes, and the red light is
always on after full charge. ) 2) The charging process does not affect the probe
charging, and the red light of the probe charging base lights up and then goes out.
(After the lamp is turned off, the probe will be turned off without taking off the
base. If the probe is not taken off for a long time, the intelligent charging
management system will automatically cut off the charging circuit to ensure the
maximum service life of the capacitor.
Use ：1. The product can be used in any barbecue equipment. The highest
temperature resistance in the temperature measuring area is 140 degrees Celsius,
and the internal temperature of food can be monitored in real time. The product
can't be placed directly on an open flame, and the highest temperature resistance in
the high temperature area is 330 degrees Celsius.
2. After the product is connected to the APP, the distance between the device and
the probe can be up to 80 meters without shielding, and the metal shielding will
appropriately reduce the connection distance. Under high temperature, the distance
is shortened by no more than 10%.
3. Shielded barbecue will affect the transmission distance to varying degrees.
4. Waterproof grade IP68 products can monitor any temperature below 140 degrees
Celsius in real time, and the wireless intelligent device displays it.
Save: Humidity, temperature -20℃ to 60℃, the base will keep the product fully
charged within 3 months after the product is fully charged, and the base needs to be
charged first after the power of the base is insufficient. The charging process will not
affect the charging function of the product.
Application environment:
1. On BBQ occasion, the food temperature is monitored remotely and in real time.2.
Meat processing requires occasions with strict requirements on food cooking stage.3.
The app defaults to prompts for multiple processing methods of 9 ingredients.4.
Customizable temperature alarm prompt settings can be found in the function
specification.5. Application of slow cooking machine, accurately monitoring and
displaying the internal temperature of slow cooking processed food and the raw and
cooked degree of food to ensure the freshness and tenderness of food.
Advantages:
1. The product adopts digital pulse temperature measuring IC, which is accurate in
temperature measurement, simple to use and without debugging.
2. Completely wireless connection. The temperature measuring part and the display
part are displayed by Bluetooth intelligent connected intelligent devices, with long
transmission distance and stable performance.
3. You can estimate the cooking and firing completion time in advance, and the
real-time mobile phone push reminds you of the food processing process, which can
make better use of the time, so that you don't have to worry about the scorching of
ingredients at BBQ party because of the heat and special circumstances, and you
don't have to wait all the time.
4. Waterproof IP68 can be washed directly, and the whole body food contact
material is safe to use.
5. The needle is powered by a large capacity capacitor, which is safe and
pollution-free. Charge for about 20 minutes, and work continuously for 36-48 hours.
Notes:
1. Because the product is made of all-metal material, it can't be used in the
microwave oven. When the food in the slow cooker is vacuumized, the antenna part
of the temperature recorder is exposed to the water surface as much as possible to
ensure the normal transmission of Bluetooth signals. When there is shielding
environment, the base should be placed next to the needle body as far as possible
after starting up.
2. The indicator light of the charging base does not go out for a long time, and
after charging for 20 minutes, the power reaches more than 98%, which does not
affect the normal use, and the next charging can basically resume normal charging.
3. The probe is IP68 waterproof. It can be directly put into water for cleaning,
but it is not allowed to directly throw all probes into cold water when the
temperature is high, which may lead to product damage. Only when the temperature
drops to about normal temperature can all probes be put into water for cleaning.
4. The temperature measuring part of the product working in an environment
over 140 degrees Celsius must insert food above the temperature measuring
indicator line. Please refer to the following correctly inserted food pictures for
details.
5. The temperature of the product temperature measuring area is up to 140
degrees Celsius in a short time, and should not exceed 105 degrees Celsius in a long
time. The environment temperature is below 300 ℃-above 20 ℃ and works
normally.
6. Multi-probe simultaneous connection may cause interference, resulting in
short-term disconnection, which can be automatically connected soon, which is
normal.
7. After the probe is loaded, the display sequence of the mobile phone is fixed.
The base has a Bluetooth connection status indicator.
8. When installing the APP, if you don't choose to allow location acquisition, you
need to turn on the software location acquisition function in the mobile phone
privacy option, otherwise the probe may not be connected.
The product is correctly inserted into the food map.
Warning:
Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC Statement: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
ISED Statement:This device complies with Part 15 of FCC Rules [ and contains license-
exempt transmitter(s) that comply with innovation，Science and Economic Development
Canada’s licence-exempt RSS Standar(s)]. Operation is subject to the following two
conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference received, including interference that may
cause undesired operation
The digital apparatus complies with Canadian CAN ICES 3 (B)/NMB 3(B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS
102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on
RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an
uncontrolled environment.
French: L’émetteur/récepteurexempt de licence contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences et DéveloppementéconomiqueCanada
applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
l'appareil numérique du ciem conforme canadien peut 3 (b) / nmb 3 (b).
cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section
2.5 du cnr - 102 et conformité avec rss 102 de l'exposition aux rf, les utilisateurs peuvent
obtenir des données canadiennes sur l'exposition aux champs rf et la conformité.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Thermometers TM001002 Manuel utilisateur

TM001002
Marque
Thermometers
Modèle
TM001002
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Autres documents