Giant LZ1201 Manuel utilisateur

LZ1201
Giant
Marque
Giant
Modèle
LZ1201
Taper
Manuel utilisateur
Thanks for buying the RGBICW floor lamp. Read the manual carefully,
especially the warnings, and keep it for future reference. Follow the
instructions closely for proper installation. After installation, control the
lamp using the app or button.
We provide 2 years warranty for any questions since you received
the product,please feel free to contact our customer service.
Product Name
Material
Dimension
Rated Power
Inpute Voltage
Color of light
Max Luminous Flus
LED Light Source
Controlled
Waterproof Indoor Use Only
Voice/APP/Touch
Digital RGB+warm white, total 78LEDs
960lm
RGBICW
AC 100~240V
12W
Aluminum & PC
RGBICW Floor Lamp
Foreword
Made in China
Specification
English
Open the package and take out all the lamp components,includes as
following
1 x Lamp Base A
2 x Lamp B
1 x Lamp C
1 x Power adapt with wire
Put the base with the Lamp Base A in place.
Insert 2 x Lamp B and 1x Lamp C into Lamp Base A
Install screws on the joint of A, B and Lamp C, then tighten
them clockwise with a hex wrench.
Plug in the power adapter and complete the installation.
NOTE:
When disassemble the floo r lamp, keep gently to shake the connection,
pull out lamp bar while twisting the screw, do not pull violently, it may
damage cable.
position,keep a proper distance with you. make sure not affect your
ln-room activities
2.1.Three buttons on the base
2.2.Remote controller
A:You can download it by scanning the QR code.
A:You can download it by scanning the QR code.
B:You can download "Magic Lantern" from the Apple Store.
The first time you need to agree to use Bluetooth.
Turn on Bluetooth on your phone.
After turning on Bluetooth, you can find the new device in the “Group
Manage” screen, please connect it.
connect it.
Lighting styles & Music selection
Timing setting & Voice or mic Mode
B:You can go to Google Play and download the "Symphony
Lotus Lantern" application
Android user
IOS user
The RGBICW Floor lamp and surrounding parts might get hot after
hours of continuous use, do not place your hands directly on the light.
Please ensure the stated minimum distance is maintained at all times.
This product should be kept away from combustible materials
(eg. curtains).
Power off when replacing and cleaning to avoid electric shock.
Be cautions of static electricity during installation and usage.
Do not stare at the lamp for a long time.
Please keep it away from children.
The product is not water resistant, be cautions when installing and using.
TPart 3 :Safety Warning
ISED Statement: This device complies with Part 15 of FCC Rules [ and
contains license-exempt transmitter(s) that comply with
innovation，Science and Economic Development Canada’s licence-exempt
RSS Standar(s)]. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
The digital apparatus complies with Canadian CAN ICES 3 (B)/ NMB 3(B).
This device meets the exemption from the routine evaluation limits
in section 2.5 of RSS 102 and compliance with RSS 102 RF
exposure, users can obtain Canadian information on RF exposure
and compliance.
This equipment complies with Canada radiation exposure limits
set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum
distance 200mm between the radiator & your body.
French: L’appareil est conforme à la partie 15 des règles de la FCC [et
contient des émetteurs exemptés de licence qui répondent aux critères du
CNR d’exemption de licence d’innovation, sciences et développement
économique Canada]. L'opération doit remplir les deux conditions
suivantes:
(1) L'appareil ne peut pas causer d'interférence; Et
(2) L'appareil doit accepter toute interférence reçue, y compris celles qui
peuvent entraîner un fonctionnement indésirable. Les appareils
numériques sont conformes à la norme canadienne can ICES 3 (b) / NMB
3 (b).
L'appareil est conforme à l'exemption des limites d'évaluation de routine de
la section 2.5 du CNR 102, l'exposition aux radiofréquences est conforme
au CNR 102 et les utilisateurs peuvent obtenir des renseignements
canadiens sur l'exposition aux radiofréquences et la conformité.
L'appareil est conforme aux limites d'exposition aux rayonnements établies
au Canada pour les environnements non contrôlés.
Lors de l'installation et de l'utilisation de cet appareil, la distance minimale
entre le radiateur et le corps doit être de 200mm.
FCC WarningThis device complies with part 15 of the FCC rules. Operation
is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any inte rference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interferenceto radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance
20cm between the radiator and your body.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Giant LZ1201 Manuel utilisateur

LZ1201
Giant
Marque
Giant
Modèle
LZ1201
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Autres documents