GE JES2251SJ Le manuel du propriétaire

Use and Care Manual

INDOOR PRESERVATION

Refrigerators and Freezers

KRP / KRB / KRC / KFC

READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY

BEFORE INSTALLING OR USING YOUR APPLIANCE TO REDUC

E

THE RISK OF FIRE, BURN HAZARD, OR OTHER INJURY. KEEP

THIS MANUAL FOR FUTURE REFERENCE.

Do not store or use gasoline or other ﬂammable vapors and liquids in the vicinity of

this or any other appliance.

Installation and service must be performed by a qualiﬁed installer or service agency.

DO NOT REPAIR, REPLACE OR REMOVE ANY PART OF THE APPLIANCE UNLESS

SPECIFICALLY RECOMMENDED IN THE MANUAL. IMPROPER INSTALLATION,

SERVICE OR MAINTENANCE CAN CAUSE INJURY OR PROPERTY DAMAGE. REFER

TO THIS MANUAL FOR GUIDANCE. ALL OTHER SERVICING SHOULD BE DONE BY A

QUALIFIED TECHNICIAN.

INSTALLER: LEAVE THIS MANUAL WITH THE OWNER OF THE APPLIANCE.

HOMEOWNER: RETAIN THIS MANUAL FOR FUTURE REFERENCE.

IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED

EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY

DAMAGE, PERSONAL INJURY, OR DEATH.

SAFETY DEFINITIONS

THIS INDICATES THAT DEATH OR SERIOUS INJURY MAY

OCCUR AS A RESULT OF NOT OBSERVING THIS WARNING

THIS INDICATES THAT MINOR OR MODERATE INJURY MAY

OCCUR AS A RESULT OF NOT OBSERVING THIS WARNING.

THIS INDICATES THAT DAMAGE TO THE APPLIANCE OR

PROPERTY MAY OCCUR AS A RESULT OF NOT OBSERVING

THIS WARNING.

Message from Hestan:

Hestan’s award-winning culinary innovations and purpose-built features

reinvented the restaurant kitchen and redefined culinary experience in some

of America’s most acclaimed restaurants. Hestan now takes this performance

from the back of the house and puts it front and center in yours. Thoughtfully

designed and meticulously built, Hestan will serve you beautifully for years to

come.

Hestan is the only residential brand born from the dreams and demands of

professional chefs. From ranges to refrigeration, every detail is designed to

deliver the performance and reliability expected in a restaurant – now available

for you.

We appreciate you choosing Hestan, and we promise to deliver the very best to

you.

Welcome to Hestan

1

EN

TABLE OF CONTENTS

3 SAFETY PRECAUTIONS - BEFORE YOU BEGIN

6 MODEL NUMBERS

7 RATING LABEL

7 REGULATORY / CODE REQUIREMENTS

8 GETTING TO KNOW YOUR APPLIANCE

12 CONTROLS AND OPERATION

21 INTERNAL LAYOUT

25 FOOD PRESERVATION

28 CARE AND CLEANING

29 TROUBLESHOOTING

32 MAP OF FUNCTIONS AND SETTINGS

34 PARTS / SERVICE

35 LIMITED WARRANTY

SAFETY PRECAUTIONS - BEFORE YOU BEGIN

When properly cared for, your Hestan appliance will provide safe, reliable service for many

years. When using this appliance, basic safety practices must be followed as outlined below.

IMPORTANT: Save these instructions for the local Utility Inspector’s use.

INSTALLER: Please leave these instructions with the owner.

OWNER: Please retain these instructions for future reference.

This appliance is NOT designed for installation in manufactured (mobile) homes or recreational

park trailers. Do NOT install this appliance outdoors.

ELECTRICAL SHOCK HAZARD

Disconnect power before installing or servicing appliance. Failure

to do so can result in death or electrical shock.

ELECTRICAL GROUNDING

• This appliance must be grounded. Grounding reduces the

risk of electric shock in the event of a short circuit. Read the

ELECTRICAL CONNECTIONS section of the Installation

Manual for complete instructions.

• DO NOT ground to a gas pipe.

• DO NOT use an extension cord with this appliance.

• DO NOT have a fuse in the NEUTRAL or GROUNDING circuit. A fuse in the NEUTRAL or

GROUNDING circuit could result in an electrical shock.

3

EN

GENERAL SAFETY PRECAUTIONS

If this appliance is replacing an existing appliance which must be removed or

disposed of, make sure that it does not become a dangerous trap for children

by cutting its power supply cable and rendering it impossible to close the door.

Use the same caution at the end of the lifespan of the new appliance.

This appliance is designed to refrigerate beverages and foods and is intended for

domestic use.

The appliance must be installed by following the instructions in the Installation

Guide. Particular care should be taken not to obstruct the vent openings of the

appliance and of the built-in units.

The appliance features a concentrated lighting system with LED lamps. Do not stare into these

lamps when they are on to avoid possible eyesight damage.

This warning is also contained on the label attached to the inside of the refrigerator door.

When the freezer is functioning do not touch the inner stainless steel surfaces with wet or

damp hands, since skin may stick to the very cold surfaces.

Do not use any type of electrical equipment inside of the food conservation compartments.

When positioning the shelves, do not place fingers in the shelf slide guides.

Do not position containers of flammable liquids near the appliance.

Completely switch off the appliance and unplug the power supply cable during cleaning

operations.

The packaging parts can be dangerous for children: do not allow children to play with the

plastic bags, plastic film or Styrofoam.

Any repairs must be performed by a qualified Hestan Service technician.

This appliance is not intended for use by persons (including children) with reduced physical,

sensory or lack of experience and knowledge unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for their safety. Children

should be supervised to ensure that they do not play with the appliance.

CARING FOR THE ENVIRONMENT

Pay special attention to correct disposal procedure for all the packaging materials.

The appliance must not be disposed of with urban waste. Contact local waste

disposal centers on how to dispose of recyclable waste.

Prior to disposal, cut the power supply cord and make it impossible to close the

door, as stated in “GENERAL SAFETY PRECAUTIONS” above. During disposal,

avoid damage to the electronics.

The appliance does not contain hazardous substances for the atmospheric ozone layer, neither

in the electronics nor in the insulation.

B09001301

Product tested in accordante with EN62471

Risk Group 2

PRUDENZA:

NON FISSARE LA LAMPADA IN FUNZIONE.

PUÒ ESSERE DANNOSO PER GLI OCCHI.

CAUTION:

DO NOT STARE AT OPERATING LAMP.

MAY BE HARMFUL TO THE EYES.

SAFETY PRECAUTIONS - BEFORE YOU BEGIN

(CONT.)

4

EN

SAFETY PRECAUTIONS - BEFORE YOU BEGIN

(CONT.)

CLEANING AND MAINTENANCE OF THE ICE DISPENSER

Failure to properly sanitize the ice maker system can compromise the hygienic safety of the

water dispensed. Always follow sanitization instructions.

When using the appliance for the first time and every time the filter is changed, it is

recommended to let the water flow in the circuit using the “Manual Cleaning” function and

discard the ice produced in the first 24 hours. See “ACTIVATING THE ICE MAKER” on page

13.

Clean the ice bucket or drawer regularly using only drinking water.

The filter must be changed when indicated on the control panel or when the ice/water

dispenser has not been used for more than 30 days.

With each filter replacement, sanitize the ice and/or water distribution system using a food

grade disinfectant (with sodium hypochlorite), which does not alter the characteristics of the

materials. Run the “Manual Cleaning” function so that at least 1/2 gallon of water has come

through into the catch pan before use.

Only original spare parts supplied by the manufacturer should be used when replacing

components in the ice and water dispenser.

Any work on the appliance must be carried out by a qualified technician.

USING THE CONTROL MENUS

Depending on the appliance model, there may be one or two control panels, with various

controls available. Up/Down arrows

are provided to directly adjust temperatures in the

various cooling/refrigeration/freezer zones. When two panels are present, only the main

panel has the

and buttons.

Many features and settings are only accessible through the control menus. Here are the basics:

1) Touch the key to activate the interactive menu system.

If the display shows “KEYPAD LOCKED”, touch the

and Down key for several

seconds. (See “UNLOCKING THE KEYPAD” on page 14)

• Either set of the up/down buttons will move the menu selections. The active selection

is always shown in the display.

2) Use the Up/Down buttons to show a selection, then touch the button to activate it.

• You may need to use the up/down buttons again to get to a final selection. When

turning selections ON or OFF, you will have to actually follow down to that ON or OFF

and touch

to confirm it.

3) To go back out of the menu, touch the button as needed.

See also: “SPECIAL SETTINGS AND FUNCTIONS” on page 14.

5

EN

MODEL NUMBERS

REFRIGERATION MODELS

Model No. Description

KRPR36 Bottom Mount Refrigerator, Top Compressor, Pro, Right Hinged, 36"

KRPL36 Bottom Mount Refrigerator, Top Compressor, Pro, Left Hinged, 36"

KRPR36-XX Bottom Mount Refrigerator, Top Compressor, Pro, Color, Right Hinged, 36"

KRPL36-XX Bottom Mount Refrigerator, Top Compressor, Pro, Color, Left Hinged, 36"

KRBR36 Bottom Mount Refrigerator, Bottom Compressor, Right Hinged, 36"

KRBL36 Bottom Mount Refrigerator, Bottom Compressor, Left Hinged, 36"

KRBR36-OV Bottom Mount Refrigerator, Bottom Compressor, Overlay, Right Hinged, 36"

KRBL36-OV Bottom Mount Refrigerator, Bottom Compressor, Overlay, Left Hinged, 36"

KRBR36-XX Bottom Mount Refrigerator, Bottom Compressor, Color, Right Hinged, 36"

KRBL36-XX Bottom Mount Refrigerator, Bottom Compressor, Color, Left Hinged, 36"

KRCR24 Refrigerator Column, Right Hinged, 24"

KRCL24 Refrigerator Column, Left Hinged, 24"

KRCR24-OV Refrigerator Column, Overlay, Right Hinged, 24"

KRCL24-OV Refrigerator Column, Overlay, Left Hinged, 24"

KRCR24-XX Refrigerator Column, Color, Right Hinged, 24"

KRCL24-XX Refrigerator Column, Color, Left Hinged, 24"

KRCR30 Refrigerator Column, Right Hinged, 30"

KRCL30 Refrigerator Column, Left Hinged, 30"

KRCR30-OV Refrigerator Column, Overlay, Right Hinged, 30"

KRCL30-OV Refrigerator Column, Overlay, Left Hinged, 30"

KRCR30-XX Refrigerator Column, Color, Right Hinged, 30"

KRCL30-XX Refrigerator Column, Color, Left Hinged, 30"

Model No. Description

KFCR24 Freezer Column, Right Hinged, 24"

KFCL24 Freezer Column, Left Hinged, 24"

KFCR24-OV Freezer Column, Overlay, Right Hinged, 24"

KFCL24-OV Freezer Column, Overlay, Left Hinged, 24"

KFCR24-XX Freezer Column, Color, Right Hinged, 24"

KFCL24-XX Freezer Column, Color, Left Hinged, 24"

KFCR30 Freezer Column, Right Hinged, 30"

KFCL30 Freezer Column, Left Hinged, 30"

KFCR30-OV Freezer Column, Overlay, Right Hinged, 30"

KFCL30-OV Freezer Column, Overlay, Left Hinged, 30"

KFCR30-XX Freezer Column, Color, Right Hinged, 30"

KFCL30-XX Freezer Column, Color, Left Hinged, 30"

FREEZER MODELS

6

EN

RATING LABEL

The rating label contains important information about your Hestan appliance such as the model

and serial number and electrical rating.

The rating label is located on the inside wall of the refrigerator.

TYPICAL RATING LABEL

REGULATORY / CODE REQUIREMENTS

Installation of this refrigeration appliance must be made in accordance with local codes. In the

absence of local codes, this unit should be installed in accordance with the National Electrical

Code and local codes.

This appliance must be electrically grounded in accordance with local codes or in the absence

of local codes with the National Electrical Code ANSI/NFPA 70, or Canadian Electrical code

CSA C22.1.

ozFridge Gas Fill Charge

Quantité de Gaz Réfrigerateur

Freezer Gas Fill Charge

Quantité de Gaz Congélateur

Total Absorbed Current

Courant Absorbée Totale

Voltage

Tension

Frequency

Frequence

Refrigerant Gas Type

Type de Gaz Rèfrigerant

MODEL

Made in Italy

CODE

SER.NO./N° SERIE

ETL LISTED

CONFORMS TO

ANSI/UL STD 250

CERTIFIED TO CAN/CSA

STD C22.2 NO.63

A

V

Hz

HESTAN COMMERCIAL CORP.

ANAHEIM, CA - USA

KRP36

7

0

1

115

60

R134a

FI24RC-RO

F20160725000001

7

EN

GETTING TO KNOW YOUR APPLIANCE

FEATURES OF THE KRP / KRB REFRIGERATOR

1

8

9

10

11

12

13

14

2

3

4

5

6

8

9

10

11

12

13

14

2

3

4

5

6

1

KRP Models

KRB Models

7

Stainless steel grille,

aluminum trim

Control panel with display

Water Filter

Patented shelf positioning

system

“Low Temp” crisper

compartments

Automatic ice maker

Dual refrigeration system

Temperature display

Sound signals

Holiday function

Adjustable door shelves

LED lighting - multiple

locations in each compartment

Automatic drawer closing

system

FreshZone/freezer

compartment. When the

appliance is first turned on

the FreshZone/freezer

compartment is set to the

freezer mode. It can be

transformed into a

refrigerator or ExtendFresh

compartment.

2

3

4

5

6

7

8

9

10

11

12

13

14

1

Fresh Zone

Fridge

Low Temp

Fresh Zone

Fridge

8

EN

GETTING TO KNOW YOUR APPLIANCE

(CONT.)

CONTROL PANEL (KRP / KRB MODELS)

The electronic control system on your Hestan refrigerator maintains constant temperature

in both compartments and displays the measured temperature on the control panel. It also

allows the user to personalize settings of the various functions and provides alerts should a

malfunction occur.

Switches the appliance (all compartments) between

ON and Stand by (Touch for three seconds).

Allows you to switch off the refrigerator

compartment (Touch for three seconds).

Allows access to the control panel menu to change

the appliance’s various settings.

Up/Down - refrigerator: Adjust refrigerator

temperature setting or to navigate through the

control panel menu.

Shows the temperature of the refrigerator and

freezer (FreshZone) compartments, the date and

time, control panel menu and visual messages.

Up/Down - freezer (FreshZone): Adjust freezer

(FreshZone) temperature setting or to navigate

through the control panel menu.

Tap to confirm selections made in the control panel

menu.

Tap to turn the ice maker on or off.

Flashes to signal user alerts such as door being left

open in combination with a warning tone. Tap this

key to deactivate the warning tone.

1

2

3

4

5

6

7

8

9

On/Off

Fridge

Menu

Up/Down

Fridge

Display

Up/Down

Freezer

(FreshZone)

Ok

Ice maker

Alarm

1 2 3 4 5 6 7 8 9

9

EN

GETTING TO KNOW YOUR APPLIANCE

(CONT.)

FEATURES OF THE REFRIGERATOR OR FREEZER COLUMN (KRC/KFC)

KRC Models

KFC Models

7

8

9

10

2

3

6

4

1

7

9

3

5

8

1

2

6

10

11

1

2

3

4

5

6

7

8

9

10

11

Fridge

Low Temp

Freezer

Automatic door closing

system

LED lighting, multiple

locations

Stainless steel grille,

aluminum trim

Control panel with display

Patented shelf positioning

system

“Low Temp” crisper

compartments

Automatic ice maker

Refrigeration system

Temperature display

Sound signals

Adjustable door shelves

10

EN

GETTING TO KNOW YOUR APPLIANCE

(CONT.)

CONTROL PANEL (KRC / KFC MODELS)

Switches the appliance between ON and Stand

by (Press for three seconds).

Allows access to the control panel menu to

change the appliance’s various settings.

Up/Down - Adjust the temperature setting or to

navigate through the control panel menu.

(KRC/KFC has only one temperature zone.)

Display: Shows the temperature of the

compartment, the date and time, control panel

menu and various other messages.*

Up/Down - Adjust the temperature setting or to

navigate through the control panel menu.

(KRC/KFC has only one temperature zone.)

Press to confirm selections made in the control

panel menu.

Flashes to signal user alerts such as door being

left open in combination with a warning tone.

Tap this key to deactivate the warning tone.

On/Off

Menu

Up/Down

Display

Up/Down

OK

Alarm

1 2 3 4 5 6 7

1

2

3

4

5

6

7

11

EN

CONTROLS AND OPERATION

TURNING THE APPLIANCE ON AND OFF

FIRST STARTUP

When the appliance is connected to the electrical power supply but has not yet been switched

on, the display shows the message

.

This is a safety message to warn that the appliance is connected to the main power and the

control panel is off.

To switch the appliance on, press the On/Off button for three seconds.

SWITCHING OFF THE REFRIGERATOR AND FRESH ZONE COMPARTMENTS

When the appliance is first turned on the lower compartment is set to the “freezer” mode.

Once the appliance has started up, the freezer remains always on and can be switched off only

by switching off the complete appliance.

To power off, press On/Off

for three seconds.

RESTARTING

Use the same buttons to restart.

The freezer compartment always stays on and cannot be switched off except by completely

switching off the appliance by pressing the On/ Off

button for three seconds.

SWITCHING OFF FOR LONG PERIODS

During long absence periods it is recommended to switch off the refrigerator by pressing the

On/Off button for three seconds and disconnecting the electrical plug or the appropriate

circuit breaker.

Completely empty the refrigerator, clean and dry it and leave the door and drawer partially

open to prevent unpleasant odors.

If at the first startup the Standby message does not appear, but another message appears, it

means that the appliance has already started the cooling process.

If any alarms are sounding, touch the Alarm button to silence them, and let the appliance

run until the set temperature is reached.

During the first startup, it will not be possible to use the Menu to modify the factory settings

until the preset temperature has been reached.

Each time the appliance is switched on it goes through a self diagnosis procedure lasting three

minutes before completely starting up.

If only the refrigerator or wine compartment is turned off, the specific fan will continue to

operate to prevent the formation of unpleasant odors and mold.

Before turning off the appliance for a long period of time, remove all of the items inside and

leave the door and drawer open to prevent the formation of unpleasant odors and mold.

12

EN

CONTROLS AND OPERATION

(CONT.)

ADJUSTING THE TEMPERATURE SETTINGS

Each model has been carefully tested before leaving the factory and is adjusted to ensure

high performance and low consumption. Usually, it is not necessary to modify the settings.

Nevertheless, according to special needs, it is possible to modify the set temperatures within a

certain range. The “recommended” settings below are also the factory presets for each of the

zones and modes.

To adjust the temperature use the Up/Down buttons

for that zone. Upon touching these

buttons the newly set temperature will appear in the display. To modify this temperature, use

the buttons until reaching the desired temperature. After several seconds of showing the new

set temperature, the display will resume showing actual temperature.

Refrigeration Compartment

and FreshZone/Freezer

drawer set as refrigeration

From 34°F to 46°F [+1°C to +7°C], the recommended

temperature setting is 39°F [+4°C].

FreshZone/Freezer drawer

set as ExtendFresh

28°F to 36°F [−2°C to +2°C]

Recommended temperature setting is 32°F [

0°C]

Freezer Compartment and

FreshZone/Freezer drawer

set as freezer

From 9°F to −11°F [−13°C to −23°C], the recommended

temperature setting is

0°F [−18°C].

The actual temperature can vary from the set temperature following frequent openings of the

doors or insertion of room temperature foods or large quantities of foods.

6 to 12 hours may be necessary to reach the selected temperature.

ACTIVATING THE ICE MAKER

Do not perform a Manual Clean or activate the Ice Maker until the water

line is properly connected and water is turned on to the appliance.

KRB/KRP: The Ice Maker button

located on the main control panel turns the automatic ice

maker ON/OFF. The button is illuminated when the ice maker is functioning.

Other Models: The ice maker is activated or deactivated using the menus:

An initial flush of the water circuit should be performed before

activating the Ice Maker for the first time. This is done using the Manual

Clean function as follows.

Touch the

button to activate the interactive menu.

The active menu item is shown at the bottom of the display. If “Functions” isn’t showing, use

the Up/Down

buttons to show the various choices until “Functions” is shown.

• In the instruction below, when the symbol is shown, that means “use the Up/Down

button to display the following item”.

See “WATER FILTER MANAGEMENT” on page 18 for more information.

OK

OKOK

OK

OKOK

Turn icemaker ON

Turn icemaker OFF

OK

OKOK

13

EN

SPECIAL SETTINGS AND FUNCTIONS

The appliance can be configured to suit various needs through its settings, such as its operating

modes, display language, and information display. Special functions are provided to meet

various short term needs, such as parties or vacations.

The Settings and Functions are accessed on the main display by pressing the

button.

The Up/Down buttons display options which can be selected by pressing the button. The

Up/Down buttons

scroll through the selected function or setting sub-menus if applicable,

activating or deactivating by pressing the button.

Once a setting or function is confirmed, the display will automatically step back to the previous

menu to allow selection of other functions. In many cases it is possible to return to the

previous selection through the

button.

The language of the messages appearing on the display can be changed by operating as follows:

Enter the Menu by pressing the

button, select Settings via the Up/Down buttons and

confirm via . Then select the Language function and the desired language.

See also: “USING THE CONTROL MENUS” on page 5.

UNLOCKING THE KEYPAD

The keypad automatically locks after a while if not being

used. When it is locked, any touch of the keypad will display

“KEYPAD LOCKED’.

To unlock, touch the

key and Down key together

for several seconds, until the message “KEYPAD

UNLOCKED” shows on the display.

CONTROLS AND OPERATION

(CONT.)

DISPLAY INFORMATION AND MALFUNCTION MESSAGES

An integrated control system provides information through light signals or text messages

visualized on the display.

The information signal is always visualized with a steady text message, while a malfunction

signal is visualized with blinking text. The sound signal that accompanies some malfunction

signals can be deactivated by pressing the Alarm button on the main control panel.

The list of malfunction signals is located at the back of this manual.

14

EN

FUNCTIONS

MAX COOL

The Max Cool Mode prepares the cooling, Fridge and FreshZone compartments for the

introduction of fresh food or other items which may have warmed during transport. The more

quickly an item can be cooled or frozen the better it will be preserved.

This mode can also be effective at maintaining compartment temperatures while entertaining

when higher than average door and drawer openings are anticipated.

To use special functions, select the

button and use the Up/Down buttons .

The Max Cool function lowers the refrigerator temperature to 35.6°F [+2°C] for 12 hours,

permitting more rapid cooling of food that has just been placed in. Once the 12 hours have

expired, the function deactivates automatically, returning to the previously set temperature.

You can set a 1-12 hour delay before the function starts. If a power outage occurs while

MaxCool is active, the appliance resumes normal operation when power returns.

MAX COOL FRESHZONE

This function should be activated at least 24 hours before inserting room temperature items

into the freezer, or several hours before placing into the freezer previously frozen items which

have been subject to a slight temperature rise. When activated, the appliance will operate in

MaxCool for 56 hours and then return to usual operation. You can set the function to start

after a delay of 1-12 hours. If a power outage occurs while MaxCool is active, the appliance

resumes normal operation when power returns.

HOLIDAY

This function (recommended in case of prolonged absences since it allows considerable energy

savings) brings the refrigerator compartment temperature to 57.2°F [+14°C]. It is possible

to program the duration, or it can be manually deactivated upon returning after a period of

absence. This function remains active even if during the period of absence there is a prolonged

interruption of electrical power. It is possible to program a period from 1 to 90 days.

Max Cool

HHooww ttoo aaccttiivvaattee

HHooww ttoo ddeeaaccttiivvaattee

Setting a delayed

start

Max Cool

FreshZone

Max Cool

FreshZone

Max Cool

FreshZone

Max Cool

FreshZone

Max Cool

FreshZone

Max Cool

FreshZone

HHooww ttoo aaccttiivvaattee

HHooww ttoo ddeeaaccttiivvaattee

Setting a delayed

start

CONTROLS AND OPERATION

(CONT.)

15

EN

CONTROLS AND OPERATION

(CONT.)

HOLIDAY FRESHZONE

It is possible to program the function with a delay of 1 to 12 hours, and a duration of 1 to 90

days. This function (recommended in case of prolonged absences since it allows considerable

energy savings) brings the FreshZone/freezer compartment temperature to 46.4°F [8°C]. It is

possible to program the duration, or it can be manually deactivated upon reentry after a period

of absence.

This function remains active even if during the period of absence there is a prolonged

interruption of electrical power.

BEVERAGE COOLER

This function can be activated when it is necessary to cool off beverages quickly, by placing

them inside the freezer compartment.

It is possible to select a duration of 1 to 45 minutes. A sound signal will indicate when the

optimal temperature has been reached. After removing the beverages, deactivate the sound

signal by pressing the Alarm button.

Holiday

HHooww ttoo aaccttiivvaattee

HHooww ttoo ddeeaaccttiivvaattee

uuppoonn rreettuurrnn

HHooww ttoo pprrooggrraamm

tthhee dduurraattiioonn

Holiday Holiday

Holiday

HolidayHoliday

Holiday

FreshZone

HHooww ttoo aaccttiivvaattee

HHooww ttoo ddeeaaccttiivvaattee

uuppoonn rreettuurrnn

HHooww ttoo pprrooggrraamm

tthhee dduurraattiioonn

How to activate

How to

deactivate

How to program

the duration

OK

Beverage

BeverageBeverage

Beverage

OK

16

EN

CONTROLS AND OPERATION

(CONT.)

ICE MAKER ON/OFF

Certain models do not have the (Ice Maker) button on the control panel, and the ice maker

may be turned ON/OFF using menu functions.

ICE MAKER SETTINGS

The Ice Maker function permits selecting the size of the ice cubes, by choosing between Large

(base setting) or Medium, and activation of the Fast Ice function, which increases the quantity

of produced ice. The Fast Ice function deactivates automatically after 24 hours.

SABBATH MODE

The function makes it possible to comply to certain religious observances requiring that the

operation of the appliance is not affected by the opening or closing of the doors (the

thermostatic control, the inner lighting and the ice maker are deactivated).

When you activate Sabbath Mode, the interior lights will deactivate, and the display will show

“Sabbath Mode ON”. When you turn Sabbath Mode off, the appliance will return to normal

operation, except that menus will not be available for several minutes.

OK

OKOK

OK

OKOK

Turn icemaker ON

Turn icemaker OFF

OK

OKOK

OK

OKOK

OK

OK OK

OK

Fast Ice Fast Ice

Fast Ice

How to set cube

size to large

HHooww ttoo aaccttiivvaattee tthhee

FFaasstt IIccee ffuunnccttiioonn

HHooww ttoo ddeeaaccttiivvaattee

FFaasstt IIccee

OK

How to set cube

size to medium

OK

HHooww ttoo aaccttiivvaattee

HHooww ttoo ddeeaaccttiivvaattee

17

EN

CONTROLS AND OPERATION

(CONT.)

WATER FILTER MANAGEMENT

The following functions display filter life, permit bypassing the filter, and provide manual

flush/clean of the filter and ice maker.

Filter Status and counter reset

Functions to view remaining life and to reset counter after changing filter cartridge.

Bypassing the filter

The included filter can be bypassed when excellent quality water is available from he home

water system.

Manual clean (flush) water filter

If ice production has been disabled or unused for a long period it is recommended to perform a

Manual Clean function to flush out water which has sat in the system during this period.

Repeat the operation until the water is clean. Before proceeding it is important to turn off the

ice maker by pressing the

button or using the menu. (See previous page.)

Correctly position the ice tray or another suitable container under the ice maker to collect

water, then close the drawer. At the end of the operation, wash the tray.

OK

View Status

Resetting filter

How to set the filtered

water meter to zero

How to check the

status of the filter

The View Status function displays the remaining life of the filter.

The Reset Filter function sets the filter usage counter to zero.

Do this when replacing the filter cartridge.

How to activate

How to de-activate

filter bypass

How to manually

clean the filter

18

EN

La page charge ...

GE JES2251SJ Le manuel du propriétaire

GE JES2251SJ Le manuel du propriétaire

dans d''autres langues

Autres documents