Haier DWL3025 Guide d'installation

Catégorie
Coffres de rangement
Taper
Guide d'installation

Ce manuel convient également à

Dishwasher Installation
Instalación del lavavajillas
Installation du lave-vaisselle
Quality
t
Innovation
t
Style
Part # DW-7777-01
1
English
TABLE OF CONTENTS
PAGE
SAFETY PRECAUTIONS ............................................................................. 2
Before Using Your Dishwasher .................................................................... 3
UNDER COUNTER DISHWASHER INSTALLATION INSTRUCTIONS
WHAT DO I NEED TO HAVE TO INSTALL THE DISHWASHER? .................5-10
Tools, parts & materials ..........................................................................5-6
Cabinet Requirements ............................................................................... 7
Cabinet Dimensions ................................................................................ 10
WHAT DO I NEED TO DO BEFORE I INSTALL THE DISHWASHER? .........11-19
Prepare cabinet ...................................................................................... 11
Prepare dishwasher ................................................................................. 15
HOW DO I INSTALL THE DISHWASHER? ................................................19-23
Connect dishwasher ................................................................................ 19
Secure dishwasher .................................................................................. 22
Install Cabinet Seal ................................................................................. 23
Install additional sound insulation ............................................................. 24
Check operation ..................................................................................... 25
Thank you for using our Haier product.
This easy-to-use manual will guide you
in getting the best performance from
your Haier Dishwasher.
Remember to record the model and
serial number. They are on a label in
the dishwasher.
Model number
Serial number
Date of purchase
English
2
SAFETY PRECAUTIONS
Warning! – To reduce the risk of fire, electric shock, or injury to
persons, always exercise basic safety precautions, including the
following:
1. Read all instructions before using the appliance.
2. Use the dishwasher only for its intended function.
3. Use only detergents or rinse agents recommended for use in a dishwasher,
and keep them out of the reach of children.
4. When loading items to be washed:
1) Locate sharp items so that they are not likely to damage the door seal;
2) Load sharp knives with the handles up to reduce the risk of cut-type
injuries.
5. Do not wash plastic items unless they are marked “dishwasher safe” or
the equivalent. For plastic items not so marked, check the manufacturer’s
recommendations.
6. Do not touch the heating element during or immediately after use.
7. Do not operate the dishwasher unless all enclosure panels are properly in
place.
8. Do not tamper with controls.
9. Do not abuse, sit on, or stand on the door, lid, or dish racks of the
dishwasher.
10. To reduce the risk of injury ,do not allow children to play in or on the
dishwasher.
11. Under certain conditions, hydrogen gas may be produced in a hot water
system that has not been used for two weeks or more. HYDROGEN GAS
IS EXPLOSIVE. If the hot water system has not been used for such a period,
before using the dishwasher turn on all hot water faucet’s and let the water
flow from each for several minutes, This will release any accumulated
hydrogen gas. As the gas is flammable, do not smoke or use an open flame
during this time.
12. Remove the door or lid to the washing compartment when removing an old
dishwasher from service or discarding it.
Staple your receipt to your manual.
You will need it to obtain warranty service.
3
English
BEFORE USING YOUR DISHWASHER
YOU CAN BE SERIOUSLY INJURED
IF YOU DO NOT FOLLOW
INSTRUCTIONS IMMEDIATELY.
DANGER
WARNING
YOU CAN SERIOUSLY INJURED IF YOU
DO NOT FOLLOW INSTRUCTIONS.
All safety messages will tell you what the potential hazard is,
how to reduce the chance of injury and what can happen
if the instructions are not followed.
IMPORTANT: READ AND SAVE THESE INSTRUCTIONS
Doing so will:
tNBLFJOTUBMMBUJPOFBTJFS
tIFMQZPVJOUIFGVUVSFJGZPVIBWFRVFTUJPOT
tIFMQJGZPVIBWFBOFMFDUSJDBMJOTQFDUJPO
Call your dealer when you have questions or need service. When you call, you
will need the dishwasher model and serial numbers.
This is the safety alert symbol.
This symbol alerts you to potential hazards that may seriously injure you
and others.
All safety messages follow the safety alert symbol and either the word
“DANGER” or “WARNING”
4
English
YOU NEED TO
t$BSFGVMMZPQFOEJTIXBTIFSEPPSXIJMFTPNFPOFHSBTQTUIFSFBSPGUIF
dishwasher. Remove shipping materials and lower rack. Close dishwasher
door. Latch the dishwasher door shut.
t*OTUBMMUIJTEJTIXBTIFSBTTQFDJGJFEJOUIFTFJOTUSVDUJPOT
t)BWFFWFSZUIJOHZPVOFFEUPPMTNBUFSJBMTQBSUTUPQSPQFSMZJOTUBMM
dishwasher.
t$POUBDUBRVBMJGJFEQFSTPOUPDBSSZPVUJOTUBMMBUJPO*OTUBMMBUJPONVTU
be performed by a qualified service technician.The dishwasher must be
installed to meet all local codes and ordinances for electrical and plumbing
connections.
5
English
ALL INSTALLATIONS
A. Pliers
B. Phillips screwdriver
C. ”open end wrench
D. Measuring tape or ruler
E. 10” adjustable wrench that opens to 1wDN
F. Flat-blade screwdriver
G. Gloves
H. Utility knife
I. 2 twist-on wire connectors which are the proper size to connect your
household wiring to 16-gauge wiring in dishwasher
J. Small level
K. Safety glasses
L. 90º elbow with wDN/15FYUFSOBMUISFBETPOPOFFOE5IFPUIFS
end must fit your water supply line.)
M. Flashlight
N. Teflon
®
tape or pipe joint compound
O. Shallow pan
14IJNTUPDLJGJOTUBMMFEXJUICVJMUVQGMPPS
TOOLS AND MATERIALS NEEDED
6
English
IN ADDITION FOR NEW INSTALLATIONS
Q. Electric drill with
R. ”, ”and 1” hole saw bits
S. Small tubing cutter
T. Wire stripper
U. 1”- 2” screw-type clamp if
connecting to waste-tee
7$PQQFSUVCJOHwSFDPNNFOEFEPSGMFYJCMFTUSBJOMFTTTUFFMCSBJEFEGJMMMJOF
W. Clamp connector or conduit connector to fit a wDNEJBNFUFSIPMF
PARTS SUPPLIED
A. 2 drain hose clamps
1-large
1-small
B. 2 Self-Tapping 4.2 X 18 Philip’s-head screws
C. 7 Self-Tapping 3.5 X 13 Philip’s-head screws
D. Drain hose
&4PVOEQBE%8-BOENPEFMTPOMZ
'4PVOE.BU%8-BOENPEFMTPOMZ
Make sure all these parts are included.
PARTS SUPPLIED
A. 2 drain hose clamps
1-large
1-small
E
F
D
C
7
English
Do not run water drain lines or electrical wiring where they can interfere with or
contact dishwasher motor or legs.
The location where the dishwasher will be installed must provide clearance
between motor and flooring.
Do not install dishwasher over carpeted flooring.
Protect dishwasher and water lines leading to dishwasher against freezing.
Damage from freezing is not covered by the warranty.
CHECK LOCATION WHERE DISHWASHER WILL BE INSTALLED.
THE LOCATION MUST PROVIDE
t&BTZBDDFTTUPXBUFSFMFDUSJDJUZBOEESBJO
t$POWFOJFOUMPBEJOH
t$PSOFSMPDBUJPOTSFRVJSFBwDNNJOJNVNDMFBSBODFCFUXFFOUIFTJEFPG
the dishwasher door and wall or cabinet.
t4RVBSFPQFOJOHGPSQSPQFSPQFSBUJPOBOEBQQFBSBODF
t$BCJOFUGSPOUQFSQFOEJDVMBSUPGMPPS
t-FWFMGMPPS*GGMPPSBUGSPOUPGPQFOJOHJTOPUMFWFMXJUIGMPPSBUSFBSPGPQFOJOH
shims may be needed to level dishwasher.
Note: Shims must be securely attached
to floor to prevent their movement when
dishwasher is being operated. If dishwasher
will be left unused for a period of time or
in a location where it may be subject to
freezing , have it winterized by authorized
service personnel. Make sure pipes, wires
and drain hose are within the shaded
area shown in diagram. See page 10 for
dimensions.
HELPFUL TIP:
*GUIFGMPPSBUUIFDBCJOFUPQFOJOHJTVOFWFOFYBNQMFUJMFGMPPSJOHPOMZ
part way into cabinet) you will need to take special care in measuring
dimensions and in leveling dishwasher.
CABINET REQUIREMENTS
8
English
It is the customer’s responsibility to contact a qualified electrician to ensure that
the electrical installation is adequate and conforms with all national and local
codes and ordinances.
You must have:
tWPMU)["$POMZPSBNQGVTFEFMFDUSJDBMTVQQMZ
t$011&38*3&0/-:
We recommend:
t"UJNFEFMBZGVTFPSDJSDVJUCSFBLFS
t"TFQBSBUFDJSDVJU
IF DIRECT-WIRING DISHWASHER
t6TFGMFYJCMFBSNPSFEPSOPONFUBMMJDTIFBUIFEDPQQFS
wire with grounding wire that meets the wiring
requirements for your home and local codes
and ordinances.
t6TFTUSBJOSFMJFGNFUIPEQSPWJEFEXJUIIPVTFXJSJOH
KVODUJPOCPYPSJOTUBMMB6-MJTUFE$4"DFSUJGJFEDMBNQDPOOFDUPSUPUIFIPVTF
XJSJOHKVODUJPOCPY*GVTJOHDPOEVJUVTFB6-MJTUFE$4"DFSUJGJFEDPOEVJU
connector.
IF CONNECTING DISHWASHER WITH A POWER SUPPLY CORD
t6TFB6-MJTUFEHBVHFUISFFDPOEVDUPS
power supply cord that meets
BMMMPDBMDPEFTBOEPSEJOBODFT.BYJNVN
length of the power supply cord is
GFFUN
t"DMBNQDPOOFDUPSUPGJUBwDN
diameter hole is required to secure power
TVQQMZDPSEUPEJTIXBTIFSUFSNJOBMCPY
t1PXFSTVQQMZDPSENVTUQMVHJOUPBNBUJOH
three-prong, grounded outlet located in the
DBCJOFUOFYUUPUIFEJTIXBTIFSPQFOJOH
Outlet must meet all local codes and
ordinances.
ELECTRICAL
9
English
YOU MUST HAVE
t"IPUXBUFSMJOFXJUIQTJL1BXBUFSQSFTTVSF
t*OMFUXBUFSUFNQFSBUVSF'$NJOJNVNBUUIFEJTIXBTIFSJT
recommended.
twDN0%UVCJOHXJUIDPNQSFTTJPOGJUUJOHPSGMFYJCMFTUBJOMFTTTUFFM
CSBJEFEGJMMMJOFwDNNJOJNVNQMBTUJDUVCJOHJTPQUJPOBMCVUOPU
recommended).
t"FMCPXXJUIwDN/15FYUFSOBMQJQFUISFBET
POPOFFOE%POPUTPMEFSXJUIJOwDNGSPNXBUFSJOMFU
valve.
WATER
YOU MUST HAVE
t6TFUIFOFXESBJOIPTFTVQQMJFE
with your dishwasher. If this is not
suitable, use a new drain hose
XJUIBNBYJNVNMFOHUIPG
GFFUNUIBUNFFUTBMMDVSSFOU
")".*"1.0UFTUTUBOEBSET
is resistant to heat and detergent,
and fits the drain connector on
your dishwasher.
t)BWFBIJHIESBJOMPPQJODIFT
DNBCPWFUIFTVCGMPPSPS
floor.
t$POOFDUESBJOIPTFUPXBTUFUFF
or disposer inlet above drain trap
in house plumbing and 20 inches
DNNJOJNVNBCPWFUIFGMPPS
t6TFBOBJSHBQJOUIFESBJOMJOFJGUIFESBJOIPTFJTDPOOFDUFEUPIPVTF
QMVNCJOHMPXFSUIBOJODIFTDNBCPWFTVCGMPPSPSGMPPS
t6TFwDNNJOJNVN*%ESBJOMJOFGJUUJOHT
DRAIN
10
English
* Measured from the lowest point on the underside of countertop. May be
reduced to 34 wDNCZSFNPWJOHBEKVTUBCMFGPPUGSPNEJTIXBTIFS
** Minimum, measured from narrowest point of opening.
*** Maybe increased to 6wDNJGIFJHIUPGPQFOJOHJTwDN
at lowest point.
OPENING FOR DIAMETER
Water line wDN
Drain line 1wDN
Direct wire wDN
Power Supply Cord 1wDN
Cut openings in shaded area of cabinet walls or floor as specified in chart:
CABINET DIMENSIONS
English
11
PREPARE CABINET
1.
Disconnect the power supply. Turn water off. Put on gloves and safety
glasses.
2. If you are replacing a dishwasher:
t$IFDLUIBUUIFXBUFSMJOFi"wSFBDIFTUP
the back left of opening where the water
connection will be made.
t$IFDLUIBUUIFEJSFDUMJOFi#wSFBDIFTUPUIF
back left of opening where the electrical
connection will be made.
If the water line and the direct wire reach into the opening far enough, go to step
10, page 13.
If you are installing a new dishwasher, complete all of the
following steps:
Electrical
Follow all national and local codes and ordinances for completing electrical
supply to cabinet.
WARNING
Electrical Shock Hazard
%JTDPOOFDUFMFDUSJDBMQPXFSBUUIFGVTFCPYPSDJSDVJU
CSFBLFSCPYCFGPSFJOTUBMMJOHEJTIXBTIFS
Failure to do so can result in death or electrical shock.
%POPUVTFBOFYUFOTJPODPSEPSBEBQUFSQMVTXJUIUIJT
appliance.
If you are: Use steps:
Direct Wiring 3, 4 and 5
Using a power supply cord 3a and 4a
English
12
HELPFUL TIP:
Wiring the dishwasher will be easier if you route wire
into the cabinet opening from the left side.
3. DIRECT WIRE METHOD:
Cut a wDNIPMFw$wJOSJHIUIBOEDBCJOFUTJEF
rear or floor. Optional locations are shown. Wood
Cabinet: Sand hole until smooth.
3a. POWER SUPPLY CORD METHOD:
Cut a 1wDNIPMFi%wJOSJHIUIBOEDBCJOFUSFBS
or side. Optional locations are shown. Wood cabinet:Sand hole until smooth.
4. 3VOXJSFJOUPIPVTFXJSJOHKVODUJPOCPY6TFstrain relief method provided
XJUIKVODUJPOCPY*GOPTUSBJOSFMJFGJTQSPWJEFEJOTUBMM
B6-MJTUFE$4"DFSUJGJFEDMBNQDPOOFDUPSGPSGMFYJCMF
UZQFXJSF*GJOTUBMMJOHDPOEVJUBUUBDIB6-MJTUFE$4"
DFSUJGJFEDPOEVJUDPOOFDUPSUPKVODUJPOCPY
4a. Install a mating, three-prong, grounding-
UZQFXBMMSFDFQUBCMFi&wJOUIFDBCJOFUOFYUUPUIF
dishwasher opening. Go to step 6.
5. Run other end of wire through cabinet hole.
$BCMFNVTUFYUFOEUPUIFMFGUGSPOUPGDBCJOFU
opening. Go to step 6.
Install a mating, three-prong, grounding-type wall
SFDFQUBDMFi&wJOUIFDBCJOFUOFYUUPUIFEJTIXBTIFS
opening. Go to step 6.
WATER LINE
6.
$VUBwDNNJOJNVNIPMFi'wJOMFGUIBOE
cabinet side,rear or floor. Optional locations are shown.
5IFIPMFi'wJTBCPVUwIJHIFSUIBOIPMFi$wPS
hole “D”)
7. Measure total length of copper tubing “G” required.
Attach copper tubing to water line with manual shut-
off valve. Carefully feed copper tubing through hole in
DBCJOFUDPQQFSUVCJOHXJMMCFOEBOELJOLFBTJMZVOUJM
it is far enough into the cabinet opening to connect it to
dishwasher inlet on the front left of dishwasher.
HELPFUL TIP:
Routing the water line through the left side of
cabinet opening will make water connection easier.
E
English
13
DRAIN HOSE
10.
$VUBwDNEJBNFUFSIPMFJODBCJOFUXBMM
or floor on the side of the opening closest to the sink.
11. Connect drain hose to waste tee or waste disposer
following one of the following methods:
*An air gap is recommended
an air gap
11a.
no air gap* 11c.
an air gap 11b.
no air gap* 11d.
a waste disposer
no waste disposer
11a. WASTE DISPOSER & AIR GAP
1. Remove the disposer knockout plug. Cut end of drain
IPTFi*wJGOFFEFEEPOPUDVUSJCCFETFDUJPO
2. Attach drain hose to air gap “J” with large spring-type
DMBNQi,w*GUIFESBJOIPTFXBTDVUVTFBwUP
wUPDNTDSFXUZQFDMBNQ
3. Use a rubber hose *connector “L” with spring or screw-type clamps* “M” to
connect air gap to disposer inlet “N”. The connection “N” MUST be made
CFGPSFESBJOUSBQi0wBOEBUMFBTUwDNBCPWFUIFGMPPSXIFSF
dishwasher will be installed. Go to step 12.
11b. NO WASTE DISPOSER & AIR GAP
$VUFOEPGESBJOIPTFi*wJGOFFEFEEPOPUDVUSJCCFE
section).
2. Attach drain hose to air gap “J” with large spring-
UZQFDMBNQ*GUIFESBJOIPTFXBTDVUVTFBwUP
wUPDNTDSFXUZQFDMBNQ
3. Use a rubber hose *connector “L” with spring or screw-type *clamps “M” to
connect air gap to waste tee “P”. This connection “P” MUST be made before
ESBJOUSBQi0wBOEBUMFBTUwDNBCPWFUIFGMPPSXIFSFEJTIXBTIFS
will be installed. Go to step 12.
* Parts available from local pumbing supply stores.
8. Turn shutoff valve “H” to “ON” position. Flush water into a
bucket to get rid of particles that may clog the inlet valve.
9. Turn shut-off valve to “OFF” position
P
11c. WASTE DISPOSER - WITH NO AIR GAP
1. Remove the disposer knockout plug.
Do not cut end of drain hose.
2. Attach drain hose “I” to disposer inlet “N” with large
spring-type clamp “K”.
This connecting “N” MUST be made before drain trap
i0wBOEBUMFBTUwDNBCPWFUIFGMPPSXIFSFEJTIXBTIFSXJMMCF
installed.
3. The drain hose must be looped up and securely fastened
to the underside of the counter before going to the drain.
)PTFMPPQNVTUCFBNJOJNVNJODIFTDN
BCPWFGMPPS(PUPTUFQ
11d. NO WASTE DISPOSER - WITH NO AIR GAP
$VUFOEPGESBJOIPTFi*wEPOPUDVUSJCCFETFDUJPO
"UUBDIESBJOIPTFUPXBTUFUFFi1wXJUIwUPwUPDNTDSFXUZQF
clamp* “M”. The connection “P” MUST be made before drain trap “O” and
BUMFBTUwDNBCPWFUIFGMPPSXIFSFEJTIXBTIFSXJMMCFJOTUBMMFE
3. The drain hose must be looped up and securely fastened to the underside
of the counter before going to the drain. Hose loop must be a minimum 30
JODIFTDNBCPWFGMPPS(PUP4UFQ
* Parts available from local plumbing supply stores.
Insert drain hose “I” into hole cut in cabinet and guide
toward the back center of opening where drain connection
will be made.
English
14
HELPFUL TIP:
To reduce the vibration of the hose, keep the hose away from the
floor and the edge of the hole where it passes through the cabinet.
English
15
WARNING
EXCESSIVE WEIGHT HAZARD
Use two people to move and install dishwasher. Failure to
do so can result in back or other injury.
1. Grasp sides of dishwasher door and
place dishwasher on its back.
2. Remove two screws “A” attaching
access panel “B” and lower panel
i$wUPEJTIXBTIFSVTJOHBw
IFYTPDLFUOVUESJWFSPS1IJMJQT
screwdriver. Remove panels and
set panels aside in a safe place.
Make sure that grounding clip “D” is
attached to the lower panel.
3. Apply pipe joint compound “E” to
90∞elbow fitting “F” and connect
fitting to water inlet valve “G”.
Tighten elbow until snug, making sure
that it faces to the rear.
A
B
C
A
D
E
F
F
G
Tip Over Hazard
Do not use dishwasher until completely installed.
Do not push down on open door. Doing so can
result in serious injury.
WARNING
PREPARE DISHWASHER
English
16
3FNPWFUFSNJOBMCPYDPWFSi)w1VMM
appliance wires “I” through hole in terminal
CPY%POPUVOUJFUIFLOPUJOUIFXJSFT
*GZPVBSFEJSFDUXJSJOHJOTUBMMB6-MJTUFE
CSA-certified clamp connector “J” to
UIFUFSNJOBMCPY*GVTJOHDPOEVJUVTFB
6-MJTUFE$4"DFSUJGJFEDPOEVJUDPOOFDUPS*G
you are installing a power supply cord kit,
do so now and follow kit instructions.
5. Measure height of cabinet opening from
underside of countertop to floor where
EJTIXBTIFSXJMMCFJOTUBMMFEi,wZPV
need the lowest point). Check chart for
that height opening. Put wheels “L” in the
required position. Turn both front leveler
legs to the same height.
If the minimum cutout height is less than
wDNUIFBEKVTUBCMFMFHTDBOCF
removed for additional clearance. This will
BMMPXUIFEJTIXBTIFSUPGJUJOUPBw
DNIJHIDVUPVUCVUUIFEJTIXBTIFS
will be more difficult to move into position.
If the wheels are removed, protect the floor
when moving the dishwasher.
HELPFUL TIP:
Put cardboard under dishwasher until it is installed. The cardboard
will help protect floor during installation.
H
I
J
K
Min Cutout
Height
Wheel Position
(See Illustration)
Number of Turns
on Front Leg
34” (86.4 cm) 1 10
34 1/4” (87 cm) 2 5
34 1/2” (87.6 cm) 3 0
English
6. Stand dishwasher upright.
7. The dishwasher must be secured to the
cabinet. There are two brackets on top of
the dishwasher that usually can be attached
to the countertop. If this is not possible, the
brackets “M” may be moved to the sides of
the dishwasher.
If you are going to attach the dishwasher to
the countertop, skip to step 13.
If you are going to attach the dishwasher
to the sides of the cabinet, follow steps 8
through 12.
8. To remove the brackets from the top, flatten
tab “N” at back of brackets with pliers and
pull the brackets out of the slots “O”.
9. Break off the end of the bracket along the
scored line “P”.
10. Open dishwasher door and place towel
“Q” over pump assembly and spray arm
of dishwasher. This will prevent screws
from falling into pump area when securing
dishwasher to countertop.
11. Open dishwasher door and push the plastic
buttons “R” out of the side of the tub.
NOTE: Save the buttons to cover the holes
after dishwasher is installed.
12. Push bracket into slot “S” on the side of
dishwasher and bend tab in towards the side
of the dishwasher so that it keeps the bracket
in place.
17
HELPFUL TIP:
Built-up floors.
Measure height of opening from underside of
countertop to built-up floor. If the height is at least
wDNNJOUIFEJTIXBTIFSXJMMGJUJOUPUIF
opening without modification to the countertop or
flooring.
Put wheels “L” in position 1 and turn the front
leveler legs until they are fully retracted. Add shims
as needed in the area shown to bring dishwasher
up to proper height. Note: Shims must be securely
attached to floor to prevent their movement when
the dishwasher is operated.
14. Grasp the dishwasher door at the edges of the door
panel ”O”. Tilt dishwasher backwards on wheels “P”.
Move dishwasher close to cabinet opening. Do not
push on front of panel or on console- they may dent.
15. If dishwasher has a power supply cord, insert power
supply cord into hole cut into cabinet.
16. Check that water line is on the left side of opening
and drain hose is near the center of the hole in the
cabinet. If using direct wire, check that it is on the
right side of opening.
17. Carefully move dishwasher completely into cabinet
opening. Do not kink or pinch cropper tubing, drain
hose, power supply cord or direct wire between dish-
washer and cabinet. Center the dishwasher in the
opening.
13. Check the door spring tension. With another person holding the dishwasher
to prevent it from tipping, open and close the door a few times. The door
should open and close easily.
To adjust the door spring tension, unhook the spring
“T” from the rear leg of the dishwasher. With a
wOVUEJWJEFSPSIFYTPDLFUSFNPWFUIFTDSFX
“U” from the tensioner “V”. The screw can be put
into one of three holes “1”, “2”, “3”, in front leg of
dishwasher. The dishwasher is shipped with the screw
in the back hole.
If the door opened by itself, move the tensioner to
hole “2” or “3” and replace screw. Re-attach door
spring to the rear leg. Tensioners on both sides of
dishwasher should be secured at same holes.
34-1/4”
(87 cm)
min.
O
P
18
English
19
18. Remove cardboard from under dishwasher.
19. Align front of dishwasher door panel “Y” with cabinet doors
“Z”. You may need to adjust alignment to for the appropriate
appearance.
20. Check that leveling legs “AA” are firmly
against the floor. Close and latch the door,
and place level against the front panel “BB”.
Check that dishwasher is plumb. Adjust
leveling legs or add shims under rear wheels
until dishwasher is level. Note: Shims must
be securely attached to floor to prevent their movement
when the dishwasher is operated. Repeat for other side of
dishwasher. Place level against top front opening of tub
“CC”. Check that dishwasher is level from side to side. If
dishwasher is not level, adjust front legs up or down until
dishwasher is level.
CONNECT DISHWASHER
Electrical connection
$IFDLFMFDUSJDBMSFRVJSFNFOUTTFFQBHF:PVNVTU
t)BWFUIFDPSSFDUFMFDUSJDBMTVQQMZBOE
recommended grounding method.
t$IFDLUIBUQPXFSTVQQMZJTEJTDPOOFDUFE
If you are: Use steps:
direct wiring 1-4
using a power supply cord 1a
HELPFUL TIP:
It is okay if dishwasher fits tightly into cabinet opening. Do not remove
insulation blanket- it reduces the sound level.
Y
Z
HELPFUL TIP:
Prop up one side of frame to hold dishwasher up
off floor when adjusting front legs.
BB
AA
CC
HELPFUL TIP: Built-up floors.
Tilt dishwasher backward to move into opening.
Once in position, support front of dishwasher by
lowering or shimming front feet.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84

Haier DWL3025 Guide d'installation

Catégorie
Coffres de rangement
Taper
Guide d'installation
Ce manuel convient également à

dans d''autres langues