STIHL FS-KM Manuel utilisateur

STIHL FS-KM

Instruction Manual

Notice d’emploi

G Instruction Manual

1 - 28

F Notice d’emploi

29 - 57

Original Instruction ManualPrinted on chlorine-free paper

Printing inks contain vegetable oils, paper can be recycled.

0458-407-8221-B. VA4.J20.

0000006945_009_GB

FS-KM

English

1

with electronic systems.

Contents

Dear Customer,

Thank you for choosing a quality

engineered STIHL product.

It has been built using modern

production techniques and

comprehensive quality assurance.

Every effort has been made to ensure

your satisfaction and trouble-free use of

the product.

Please contact your dealer or our sales

company if you have any queries

concerning this product.

Your

Dr. Nikolas Stihl

KombiSystem 2

Guide to Using this Manual 2

Safety Precautions and Working

Techniques 2

Approved KombiEngines 10

Approved Combinations of Cutting

Attachment, Deflector, Handle and

Harness 11

Mounting the KombiTool 13

Mounting the Deflector 13

Mounting the Cutting Attachment 14

Fitting the Harness 17

Balancing the Machine 18

Starting / Stopping the Engine 19

Transporting the Unit 19

Lubricating the Gearbox 22

Storing the Machine 22

Sharpening Metal Cutting Blades 23

Maintaining the Mowing Head 23

Maintenance and Care 25

Main Parts 26

Specifications 27

Maintenance and Repairs 28

Disposal 28

FS-KM

English

2

In the STIHL KombiSystem a number of

different KombiEngines and KombiTools

can be combined to produce a power

tool. In this instruction manual the

functional unit formed by the

KombiEngine and KombiTool is referred

to as the power tool.

Therefore, the separate instruction

manuals for the KombiEngine and

KombiTool should be used together for

the power tool.

Always read and and make sure you

understand both instruction manuals

before using your power tool for the first

time and keep them in a safe place for

future reference.

Pictograms

All the pictograms attached to the

machine are shown and explained in this

manual.

Symbols in text

WARNING

Warning where there is a risk of an

accident or personal injury or serious

damage to property.

NOTICE

Caution where there is a risk of

damaging the machine or its individual

components.

Engineering improvements

STIHL's philosophy is to continually

improve all of its products. For this

reason we may modify the design,

engineering and appearance of our

products periodically.

Therefore, some changes, modifications

and improvements may not be covered

in this manual.

Lend or rent your machine only to

persons who are familiar with this model

and its operation – do not lend or rent

your machine without the KombiEngine

and KombiTool user manuals.

Depending on the cutting attachment

fitted, use your power tool only for

cutting grass, wild growth, shrubs,

scrub, bushes, small diameter trees and

similar materials.

The machine must not be used for any

other purposes – risk of accidents!

Only use cutting attachments and

accessories that are explicitly approved

for this power tool model by STIHL or

KombiSystem Guide to Using this Manual Safety Precautions and

Working Techniques

Some special safety pre

-

cautions must be

observed to reduce the

risk of personal injury

when operating this

power tool because of the

very high speed and

sharpness of its cutting

attachment.

Always read and and

make sure you under

-

stand both user manuals

(KombiEngine and

KombiTool) before using

your power tool for the

first time and keep them

in a safe place for future

reference. Non-compli

-

ance with the user

manuals may cause seri

-

ous or even fatal injury.

FS-KM

English

3

are technically identical. If you have any

questions in this respect, consult your

dealer.

Use only high quality parts and

accessories. in order to avoid the risk of

accidents and damage to the machine.

STIHL recommends the use of original

STIHL tools, cutting attachments and

accessories. They are specifically

designed to match the product and meet

your performance requirements.

The guard provided with your machine

may not protect the operator from all

foreign objects (gravel, glass, wire etc.)

ejected by the revolving cutting

attachment. Ejected objects may also

ricochet and strike the operator.

Never attempt to modify your power tool

in any way since this may increase the

risk of personal injury. STIHL excludes

all liability for personal injury and

damage to property caused while using

unauthorized attachments.

Do not use a high-pressure washer to

clean the power tool. The solid jet of

water may damage parts of the unit.

Clothing and equipment

Wear proper protective clothing and

equipment.

Do not wear clothing which could

become trapped in wood, brush or

moving parts of the machine. Do not

wear a scarf, necktie or jewelry. Tie up

and confine long hair above your

shoulders.

Sturdy shoes with non-slip shoes are

permissible only when using mowing

heads.

WARNING

Wear face protection and make sure it is

a good fit. Face protection alone is not

sufficient to protect the eyes.

Wear "personal" sound protection, e.g.

ear defenders.

Always wear a hard hat during thinning

work, in high brush, and whenever there

is a risk of injury due to falling objects.

STIHL can supply a comprehensive

range of personal protective equipment.

Transporting the machine

Always stop the engine.

Carry the machine hanging on the

harness or by the shaft so that it is

balanced.

To reduce the risk of cut injuries, fit

transport guard on the cutting

attachment, even when carrying the tool

for short distances – see also

"Transporting the Unit".

By vehicle: When transporting in a

vehicle, properly secure your machine to

prevent turnover, damage and fuel

spillage.

Clothing must be sturdy

but allow complete free

-

dom of movement. Wear

close-fitting clothes such

as a boiler suit, not a

loose jacket.

Wear safety boots with

steel toe caps and non-

slip soles.

To reduce the risk of eye

injuries, wear close-fit

-

ting safety glasses in

accordance with Euro

-

pean Standard EN 166.

Make sure the safety

glasses are a snug fit.

Wear sturdy protective

gloves made of a resist

-

ant material (e. g.

leather).

Avoid touching hot parts

of the machine and gear

-

box – risk of burns!

002BA079 KN

FS-KM

English

4

Before starting

Check that your power tool is properly

assembled and in good condition – refer

to appropriate chapters in the

KombiEngine and KombiTool user

manuals.

– Use only an approved combination

of cutting attachment, deflector,

handle and harness. All parts must

be assembled properly and

securely

– Check cutting attachment for

correct and secure assembly and

good condition

– Safety devices (e. g., deflector for

cutting attachments, rider plate) for

damage and/or wear. Always

replace damaged parts. Do not use

the machine with a damaged

deflector or worn rider plate (if the

writing and arrows are no longer

discernible)

– Do not attempt to modify the

controls or safety devices in any

way – only work with the deflector

fitted

– Keep the handles dry and clean –

free from oil and dirt – this is

important for safe control of the

machine

– Adjust the harness and handle(s) to

suit your height and reach Observe

the chapter "Fitting the Harness"

To reduce the risk of personal injury, do

not operate your power tool if it is

damaged or not properly assembled!

To prepare for emergencies when using

a harness: Practice setting down the

machine quickly. To avoid damage, do

not throw the unit to the ground when

practicing.

Holding and guiding the machine

Always hold the unit firmly with both

hands on the handles.

Make sure you always have good

balance and secure footing.

For versions with bike handle

Right hand on control handle, left hand

on grip on handlebar.

For versions with loop handle

For versions with loop handle and loop

handle with barrier bar, left hand on the

loop handle, right hand on the control

handle – even if you are left-handed.

Wrap your fingers and thumbs around

the handles.

While working

Make sure you always have good

balance and secure footing.

In the event of impending danger or in

an emergency, switch off the engine

immediately by moving the slide

control/stop switch/stop button to

0 or STOP.

Within a wide area around the

workplace, there is a risk of accident by

ejected objects, therefore ensure that

there is no-one within a 15 m radius of

the machine. This distance must also be

maintained in relation to objects

(vehicles, window panes) – risk of

property damage! Even at a distance

over 15 m, danger cannot be ruled out.

Check that the engine is properly idling

so that the cutting tool will not continue

rotating after you release the throttle

trigger.

Check and correct the idle speed setting

at regular intervals. If the attachment still

rotates when the engine is idling, have

your dealer check your machine and

002BA055 KN

002BA080 KN

Avoid contact with the

cutting attachment – risk

of injury!

15m (50ft)

FS-KM

English

5

make proper adjustments or repairs –

see KombiEngine user manual. STIHL

recommends you have this work done

by a STIHL servicing dealer.

Take special care in slippery conditions

– damp, snow, ice, on slopes or uneven

ground.

Watch out for obstacles: tree stumps,

roots – risk of tripping or stumbling!

Only work while standing on the ground,

never on a ladder or mobile elevated

work platform.

Never operate your power tool with one

hand.

Be particularly alert and cautious when

wearing hearing protection because

your ability to hear warnings (shouts,

alarms, etc.) is restricted.

Take breaks when you start getting tired

or feeling fatigue – risk of accidents!

Work calmly and carefully – in daylight

conditions and only when visibility is

good. Proceed with caution, do not put

others in danger.

If your power tool is subjected to

unusually high loads for which it was not

designed (e.g. heavy impact or a fall),

always check that it is in good condition

before continuing work – see also

"Before Starting".

Make sure the safety devices are

working properly. Never use a power

tool that is no longer safe to operate. In

case of doubt, contact a dealer.

Be particularly careful when working on

difficult, densely grown terrain.

When mowing in high shrubbery, under

shrubbery and hedges: Hold the cutting

tool at a working height of at least 15 cm

– avoid risks to animals.

Examine the cutting attachment

periodically at short intervals and as

soon as you note any noticeable

changes:

– Turn off the engine, hold the device

securely, press the cutting

attachment against the ground to

stop it

– Check condition and secure fitting;

watch out for cracks

– Ensure that the cutting blades are

sharp

– Replace damaged or blunt cutting

attachments immediately, even in

the event of minor hairline cracks

Clean grass and plant residue off the

cutting attachment mounting at regular

intervals – remove any build up of

material from the cutting attachment and

deflector.

To reduce the risk of injury, shut off the

engine before replacing the cutting

attachment.

Using mowing heads

Enhance the cutting attachment

deflector with the attached parts

specified in the User Manual.

Only use the protection with properly

mounted blade to ensure that the

mowing line is restricted to the

permissible length.

Always switch off the engine to adjust

the mowing line for manually adjustable

mowing heads – risk of injury!

Misuse with mowing lines that are too

long reduces the working speed of the

engine. The constant slipping of the

clutch causes overheating and damage

to important components (e. g. clutch,

plastic housing parts) – e. g. due to the

cutting attachment rotating during idling

– risk of injury!

Never work with

-

out protection

suitable for the

respective

machine and cut

-

ting tool – risk of

injury by ejected

objects!

Check the work site –

rocks, metal objects etc.

may be caught up and

ejected – possibly over a

distance of 15 m – risk of

injury! – They can also

damage the cutting

attachment and other

property (e. g. parking

vehicles, windows).

The gear head becomes

hot during operation. To

reduce the risk of burn

injury, do not touch the

gear housing!

FS-KM

English

6

When using metal cutting attachments

STIHL recommends the use of original

STIHL metal cutting attachments. These

have been optimized for the machine

and the user’s requirements.

Metal cutting attachments rotate very

fast, generating forces acting on the

attachments and on the cuttings.

Metal cutting attachments must be

sharpened in regular intervals in

accordance with the instructions.

Unevenly sharpened metal cutting

attachments generate an imbalance

which may cause extreme loads on the

machine – risk of breakage!

Dull or improperly sharpened cutting

edges can put a higher load on the

cutting attachment and increase the risk

of injuryfrom cracked or broken parts.

After each contact of the metal cutting

attachment with hard objects (e.g.

stones, rocks, metal parts), check it for

damage (e.g. tears and deformation).

Burrs and other visible material

accumulations must be removed since

they may come loose at any time while

the machine is running and then be

ejected – risk of injury!

If a rotating metal cutting attachment

touches a rock or another hard object,

sparks may be generated which may

possibly ignite combustible materials.

Also dried-out plants and brushwood are

combustible, above all in hot and dry

weather. If there is a risk of fire, do not

use metal cutting attachments in the

vicinity of combustible materials, dried-

out plants or brushwood. It is mandatory

that you ask the responsible forestry

office about the current fire hazard.

Do not continue using or attempt to

repair damaged or cracked cutting

attachments by welding, straightening or

modifying the shape (out of balance).

Particles or pieces may come off and hit

the operator or a bystander at a high

speed – risk of most severe injuries!

To reduce the above-named risks

involved in operating a metal cutting

attachment, ensure that the diameter of

your metal cutting attachment is not too

big. Also, the attachment must not be

too heavy. It must be made of high-

quality materials and have a suitable

geometry (shape, thickness).

To reduce the risk of injury, a metal

cutting attachment not manufactured by

STIHL must not be heavier, thicker,

have a different shape or a diameter

larger than the largest metal cutting

attachment approved by STIHL for this

power tool model.

After finishing work

After finishing work or before leaving the

power tool unattended: Shut off the

engine.

Clean the cutting attachment regularly

after finishing work to remove dust, dirt,

soil and plant debris – wear gloves – risk

of injury!

Do not use any grease solvents when

cleaning.

After cleaning it thoroughly, coat the

surface of metal cutting attachments

with a corrosion-proofing agent.

Maintenance and Repairs

Service the machine regularly. Do not

attempt any maintenance or repair work

not described in the KombiTool and

KombiEngine instruction manuals. Have

all other work performed by a servicing

dealer.

STIHL recommends that you have

servicing and repair work carried out

exclusively by an authorized STIHL

servicing dealer. STIHL dealers are

regularly given the opportunity to attend

training courses and are supplied with

the necessary technical information.

Only use high-quality replacement parts

in order to avoid the risk of accidents

and damage to the machine. If you have

any questions in this respect, consult a

servicing dealer.

STIHL recommends the use of genuine

STIHL replacement parts. They are

specifically designed to match your

model and meet your performance

requirements.

To reduce the risk of injury, always shut

off the engine before carrying out any

maintenance or repairs or cleaning the

machine.

Symbols on Deflectors

An arrow on the deflector shows the

correct direction of rotation of the cutting

attachments.

Some of the following symbols are

applied to the outside of the deflector to

indicate the approved combination of

cutting attachment and deflector.

FS-KM

English

7

Harness / Strap

The harness is included in the scope of

supply or available as a special

accessory.

N Use a shoulder strap.

N With the engine running, attach the

machine to the shoulder strap.

Grass cutting blades and brush knives

must always be used in combination

with a shoulder strap.

Circular saw blades must always be

used in combination with a full harness

with a quick-release system.

Mowing Head with Nylon Line

Nylon line achieves a soft cut for edging

and trimming around trees, fence posts,

etc. – less risk of damaging tree bark.

The mowing head comes with an

instruction leaflet. Refill the mowing

head with nylon line as described in the

instruction leaflet.

WARNING

To reduce the risk of serious injury,

never use wire or metal-reinforced line in

place of the nylon line.

STIHL Polycut Mowing Head with

Polymer Blades

For mowing unobstructed edges of

meadows (without posts, fences, trees

or similar obstacles).

Deflector may be used

with mowing heads.

Deflector must not be

used with mowing heads.

Deflector may be used

with grass cutting blades.

Deflector must not be

used with grass cutting

blades.

Deflector may be used

with brush knives.

Deflector must not be

used with brush knives.

Deflector must not be

used with shredder

blades.

Deflector must not be

used with circular saw

blades.

000BA015 KN

FS-KM

English

8

Check the wear limit marks!

If one of the wear limit marks on the

PolyCut mowing head is worn through

(arrow): Do not continue using the

mowing head. Install a new one. There

is otherwise a risk of injury from thrown

parts of the head.

It is important to follow the maintenance

instructions for the PolyCut mowing

head.

The PolyCut can also be equipped with

mowing line in place of the polymer

blades.

The mowing head comes with

instruction leaflets. Equip the mowing

head with polymers blades or nylon line

as described in the instruction leaflets.

WARNING

Never use wire in place of the nylon

mowing line – risk of injury.

Risk of Kickout (Blade Thrust) with Metal

Cutting Attachments

WARNING

The risk of kickout is greatest when the

black area of the rotating cutting

attachment comes into contact with a

solid object.

Grass Cutting Blade

Use for grass and weeds only – sweep

the brushcutter in an arc like a scythe.

WARNING

Improper use may damage the grass

cutting blade – risk of injury from thrown

parts.

Resharpen the grass cutting blade

according to instructions when it has

dulled noticeably.

Brush Knife

For cutting matted grass, wild growth

and scrub and thinning young stands

with a stem diameter of no more than

2 cm – do not cut thicker stems – risk of

accidents.

002BA049 KN

When using metal cut

-

ting attachments there is

a risk of kickout when the

rotating blade comes into

contact with a solid object

such as a tree trunk,

branch, tree stump, rock

or similar. The machine is

thrown to the right or to

the rear – opposite to the

attachment's direction of

rotation.

002BA135 KN

000BA020 KN

FS-KM

English

9

Use the brushcutter like a scythe (sweep

it to the right and left) at ground level

when cutting grass and thinning young

stands.

To cut wild growth and scrub, lower the

brush knife down onto the growth to

achieve a shredding effect – always

keep the cutting attachment below hip

level during this process.

Exercise extreme caution when using

this method of cutting. The higher the

cutting attachment is off the ground, the

greater the risk of injury from cuttings

being thrown sideways.

Warning! Improper use of a brush knife

may cause it to crack, chip or shatter –

risk of injury from thrown parts.

To reduce the risk of injury it is essential

to take the following precautions:

– Avoid contact with stones, rocks,

pieces of metal and other solid

foreign objects.

– Never cut wood or shrubs with a

stem diameter of more than 2 cm –

use a circular saw blade for such

work.

– Inspect the brush knife at regular

short intervals for signs of damage.

Do not continue working with a

damaged brush knife.

– Resharpen the brush knife regularly

and whenever it has dulled

noticeably, and have it balanced if

necessary (STIHL recommends a

STIHL servicing dealer).

Circular Saw Blade

Suitable for cutting shrubs and trees with

a maximum stem diameter of 4 cm.

Before starting the cut, accelerate the

engine up to full throttle. Perform cut

with uniform pressure.

Use circular saw blades only with a

matching limit stop of the correct

diameter.

WARNING

To reduce the risk of blade damage,

avoid contact with stones and the

ground. Resharpen the blade properly in

good time – dull teeth may result in the

blade cracking and shattering and

causing serious injury.

When felling, maintain a distance of at

least two tree lengths from the next

felling site.

Risk of kickout

The risk of kickout is highest in the black

area of the blade: Do not use this area of

the circular saw blade for cutting.

There is also a risk of kickout when

using the lighter shaded areas of the

blade: These areas of the blade should

only be used by experienced operators

with specialized training.

STIHL recommends that you use the

non-shaded area of the circular saw

blade. Always start the cut with this area

of the blade.

002BA355 KN

002BA509 KN

002BA068 KN

FS-KM

English

10

KombiEngines

Only use KombiEngines supplied or

explicitly approved by STIHL for use with

the attachment.

Depending on the cutting attachment

used, always observe the chapter

“Permissible combinations of cutting

attachment, deflector, grip and

harness”.

This KombiTool may be operated only in

combination with the following

KombiEngines:

STIHL KM 55 R, KM 56 R, KM 85 R

1)

,

KM 91 R, KM 94 R, KM 111 R, KM 131,

KM 131 R, KMA 130 R, KMA 135 R

WARNING

Loop-handled machines must be

equipped with a barrier bar.

Brushcutters with split shaft

The KombiTool can also be fitted to

STIHL brushcutters with a split shaft (T-

models) (basic power tools).

This KombiTool can therefore also be

used on the following machine:

STIHL FR 131 T

WARNING

Refer to the user manual of the power

tool for use of the barrier bar.

Approved KombiEngines

1)

Only outside EU

FS-KM

English

11

Approved Combinations of Cutting Attachment, Deflector, Handle and Harness

Cutting attachment Deflector, limit stop Handle Carrying strap

18

17

16

15

14

24

22

23

24

23

25

21

20

19

21

20

19

13

0000-GXX-0371-A2

8

11

10

9

12

1

2

3

4

5 6

7

FS-KM

English

12

Permissible combinations

Choose the correct combination from

the table depending on the cutting tool!

WARNING

For safety reasons only the cutting

attachments, deflector, handle and

harness versions within one line of the

table may be combined with one

another. No other combinations are

permitted because of the risk of

accidents!

WARNING

Loop-handled machines must be

equipped with a barrier bar.

Cutting attachments

Mowing heads

1 STIHL SuperCut 20

-

2

2 STIHL AutoCut C 25-2

3 STIHL AutoCut 25-2

4 STIHL AutoCut C 26-2

5 STIHL AutoCut 36-2

6 STIHL PolyCut 20-3

3)

7 STIHL DuroCut 20-2

Metal cutting tools

8 Grass cutting blade 230-2

(Ø 230 mm)

9 Grass cutting blade 260-2

(Ø 260 mm)

10 Grass cutting blade 230-4

(Ø 230 mm)

11 Grass cutting blade 230-8

(Ø 230 mm)

12 Brush knife 250-3

1)

(Ø 250 mm)

13 Circular saw blade 200-22 chisel

tooth

1)2)

(Ø 200 mm), circular saw

blade 200-22 HP chisel tooth

1)2)

(Ø 200 mm)

WARNING

Grass cutting blades, brush knives and

circular saw blades of other, non-metal

materials must not be used.

Deflectors, limit stop

14 Deflector for mowing heads

15 Deflector with

16 Skirt and blade for mowing heads

17 Deflector without skirt and blade for

metal cutting attachments,

items 8 to 13

18 Limit stop for circular saw blades

Handles

19 Loop handlewith

20 Barrier bar

21 Bike handle

Shoulder straps

22 Shoulder strap can be used

23 Shoulder strap must be used

24 Full harness can be used

25 Full harness must be used

1)

Not approved for KM 55 R, FS 56 R

2)

Not approved for FR 131 T,

KM 55 R, KM 56 R, KM 85 R,

KM 94 R, KM 111 R, KM 131 R,

KMA 130 R, KMA 135 R

1)

Not approved for KMA 135 R

FS-KM

English

13

N Push the lug (1) on the drive tube

into the slot (2) in the coupling

sleeve as far as stop.

When correctly installed, the red line (3)

(arrow point) must be flush with the end

of the coupling sleeve.

N Tighten down the star knob (4)

firmly.

Removing the KombiTool

N Reverse the above sequence to

remove the drive tube.

Mounting the Deflector

1 Deflector for mowing attachments

2 Deflector for mowing heads

Deflectors (1 and 2) are both mounted to

the gearbox in the same way.

N Place the deflector on the gearbox

flange.

N Insert the screws (3) and tighten

them down firmly.

Fitting the Skirt and Blade

WARNING

Risk of injury from thrown objects and

contact with the cutting attachment.

These parts must be fitted to the

deflector (1) when you use a mowing

head.

Fitting the Skirt

N Slide the lower guide slot of the skirt

onto the deflector – it must snap into

position.

Removing the Skirt

N Insert the stop pin into the hole in

the skirt and use it to push the skirt

to the left.

N Pull the skirt off the deflector.

Mounting the KombiTool

1

002BA326 KN

2

3

002BA327 KN

4

Mounting the Deflector

002BA636 KN

2

1

3

002BA637 KN

1.

2.

002BA646 KN

FS-KM

English

14

Mounting the Blade

N Slide the line limiting blade into the

guide on the skirt.

N Insert the screw and tighten it down

firmly.

Mounting the Limit Stop

WARNING

Risk of injury from thrown objects and

contact with the cutting attachment.

Always fit the limit stop (6) when you use

a circular saw blade.

N Position the limit stop (6) on the

gearbox flange.

N Insert the screws (7) and tighten

them down firmly.

Placing power tool on the ground

N Shut off the engine.

N Lay your power tool on its back so

that the cutting attachment

mounting face is pointing up.

Mounting Hardware for Cutting

Attachments

The mounting hardware supplied

depends on the cutting attachment that

comes as original equipment with the

new machine.

Machine supplied with mounting

hardware

Mowing heads and metal cutting

attachments may be mounted.

Depending on the cutting attachment, it

may be necessary to use the nut (3),

rider plate (4) and thrust washer (5).

These parts are included in a kit

supplied with the machine and are also

available as special accessories.

Removing the transport lock

N Pull the hose (1) off the shaft (2).

Machine supplied without mounting

hardware

Only mowing heads may be used which

mount directly to the shaft (2).

002BA638 KN

7

002BA639 KN

6

Mounting the Cutting

Attachment

002BA104 KN

2

002BA164 KN

1

3

4

5

2

002BA266 KN

FS-KM

English

15

Blocking the Shaft

The output shaft (2) must be blocked

with the stop pin (6) or screwdriver (6) to

mount or remove cutting attachments.

These parts come standard with the

machine or are available as special

accessories.

N Insert the stop pin (6) or

screwdriver (6) in the hole (7) in the

gearbox as far as stop – and apply

slight pressure.

N Rotate shaft, nut or cutting

attachment until the stop pin slips

into position and blocks the shaft.

Removing the Mounting Hardware

N Block the shaft.

N Use the combination wrench (1) to

loosen and remove the nut (2)

clockwise (left-hand thread).

N Take the thrust washer (3) off the

shaft (4). Do not remove the thrust

plate (5).

Mounting the Cutting Attachment

WARNING

Use a deflector that matches the cutting

attachment – see "Mounting the

Deflector".

Fitting the mowing head with screw

mounting

Keep the supplement sheet for the

mowing head in a safe place.

N Fit the thrust plate

N Turn the mowing head

anticlockwise on the shaft (1) as far

as it will go

N Retain the shaft

N Tighten the mowing head

NOTICE

Remove the tool that was used to block

the shaft.

Removing the Mowing Head

N Retain the shaft

N Turn the mowing head clockwise

6

7

2

002BA330 KN

6

3

4

2

271BA057 KN

1

5

1

002BA385 KN

FS-KM

English

16

Mounting Metal Cutting Attachments

Keep the leaflet and packaging of the

metal cutting attachment in a safe place.

WARNING

Wear protective gloves to reduce the

risk of direct contact with the sharp

cutting edges.

Mount only one metal cutting

attachment.

Check direction of rotation of cutting

attachment

Cutting attachments 2, 4 and 5 may be

mounted either way round – they must

be turned over regularly to help avoid

one-sided wear.

The cutting edges of cutting

attachments 1, 3, 6 and 7 must point

clockwise.

WARNING

Direction of rotation is indicated by an

arrow on the inside of the deflector.

N Place the cutting attachment (8) on

the thrust plate (9).

WARNING

Collar (see arrow) must engage the

cutting attachment's mounting hole.

Securing the cutting attachment

N Fit the thrust washer (10) – convex

side must face up.

N Fit the rider plate (11).

N Block the shaft (12).

N Use the combination wrench (14) to

screw the mounting nut (13) on to

the output shaft counterclockwise

and tighten it down firmly.

WARNING

If the mounting nut has become too

loose, fit a new one.

NOTICE

Remove the tool used to block the shaft.

Removing the Metal Cutting Attachment

WARNING

Wear protective gloves to reduce the

risk of direct contact with the sharp

cutting edges.

N Block the shaft.

N Unscrew the mounting nut

clockwise.

N Remove cutting attachment and its

mounting hardware from the

gearbox – but do not remove the

thrust plate (9).

3

1

4

6

7

5

681BA042 KN

2

10

8

9

11

12

13

14

681BA161 KN

FS-KM

English

17

The type and style of the harness,

carrying ring and carabiner (spring hook)

depend on the market.

The use of the harness is described in

the chapter on "Approved Combinations

of Cutting Attachment, Deflector, Handle

and Harness".

Shoulder strap

N Put on the shoulder strap (1).

N Adjust the length of the strap so that

the carabiner (2) is about a hand’s

width below your right hip.

N Balance the machine – see

"Balancing the Machine".

Full Harness

N Put on the full harness (1).

N Adjust the length of the strap so that

the carabiner (2) is about a hand’s

width below your right hip.

N Balance the machine – see

"Balancing the Machine".

Attaching Machine to Harness

N Attach the carabiner (1) to the

carrying ring (2) on the drive tube –

hold the carrying ring steady.

Disconnecting Machine from Harness

N Press down the bar on the

carabiner (1) and pull the carrying

ring (2) out of the carabiner.

Throwing Off the Machine

WARNING

The machine must be quickly thrown off

in the event of imminent danger.

Practice removing and putting down the

machine as you would in an emergency.

To avoid damage, do not throw the

machine to the ground when practicing.

Fitting the Harness

1

002BA374 KN

2

1

002BA375 KN

2

1

002BA308 KN

2

1

2

1

002BA310 KN

2

1

2

FS-KM

English

18

Practice quickly detaching the power

tool from the carabiner as described

under "Disconnecting Machine from

Harness".

If you are using a shoulder strap:

Practice slipping the strap off your

shoulder.

If you are using a full harness: Practice

quickly opening the locking plate and

slipping the harness straps off your

shoulders.

Balancing the Machine

The unit is balanced differently

depending on the cutting attachment

used.

Proceed as follows until the conditions

specified under "Floating positions"

have been met:

N Loosen the screw (3).

N Adjust the carrying ring.

N Tighten the screw moderately.

N Allow the unit to hang freely.

N Check the position obtained.

Floating positions

Mowing tools (A) such as mowing

heads, grass cutting blades and brush

knives

N should just touch the ground.

Circular saw blades (B)

N should "hover" about 20 cm (8 in)

above the ground.

When the correct floating position has

been reached:

N Tighten down the screw on the

carrying ring firmly.

Balancing the Machine

002BA309 KN

3

A

002BA034 KN

B

002BA035 KN

La page charge ...

STIHL FS-KM Manuel utilisateur

STIHL FS-KM Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents