STIHL RG-KM Manuel utilisateur

Taper
Manuel utilisateur
STIHL RG-KM
Instruction Manual
Notice d’emploi
G Instruction Manual
1 - 21
F Notice d’emploi
22 - 45
Original Instruction ManualPrinted on chlorine-free paper
Printing inks contain vegetable oils, paper can be recycled.
© ANDREAS STIHL AG & Co. KG 2020
0458-811-8221-A. VA3.J20.
0000008906_004_GB
0458-811-8221-A
English
1
This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process
with electronic systems.
Contents
1 Introduction
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
2 KombiSystem
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
3 Guide to Using this Manual
. . . . . . . . . . . . . . . . . . . . . . . . . .
3
3.1 Signal Words
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
3.2 Symbols in Text
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
4 Main Parts
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
4.1 KombiTool
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
5 Safety Symbols on the Product
. . . . . . . . . . . . . . . . . . . . . .
4
5.1 KombiTool
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
6 IMPORTANT SAFETY INSTRUCTIONS
. . . . . . . . . . . . .
4
6.1 Intended Use
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
6.2 Operator
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
6.3 Personal Protective Equipment
. . . . . . . . . . . . . . . . . . . . . .
5
6.4 KombiTool
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
6.5 Using the Power Tool
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
7 Maintenance, Repair and Storage
. . . . . . . . . . . . . . . . . .
11
7.1 Warnings and Instructions
. . . . . . . . . . . . . . . . . . . . . . . . . .
11
8 Before Starting Work
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11
8.1 Preparing the KombiTool for Operation
. . . . . . . . . . . . .
11
9 Assembling the Power Tool
. . . . . . . . . . . . . . . . . . . . . . . .
12
9.1 Mounting and Adjusting the Loop Handle and
Barrier Bar
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
9.2 Connecting the Drive Tube to the Gearbox
. . . . . . . . .
12
9.3 Mounting and Removing the KombiTool
. . . . . . . . . . . .
12
10 Using a Harness
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
10.1 Putting on and Adjusting the Single Harness
. . . . . . .
13
11 Checking the KombiTool
. . . . . . . . . . . . . . . . . . . . . . . . . . .
13
11.1 Checking the Blades
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
12 During Operation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14
12.1 Using the KombiTool
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14
13 After Finishing Work
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14
13.1 Preparing for Transportation or Storage
. . . . . . . . . . . .
14
14 Transporting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14
14.1 Transporting the KombiTool
. . . . . . . . . . . . . . . . . . . . . . . .
14
15 Storing
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
15.1 Storing the KombiTool
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
16 Cleaning
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
16.1 Cleaning the KombiTool
. . . . . . . . . . . . . . . . . . . . . . . . . . .
15
16.2 Cleaning the Blades
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
17 Inspection and Maintenance
. . . . . . . . . . . . . . . . . . . . . . .
17
17.1 Inspection and Maintenance Chart
. . . . . . . . . . . . . . . . .
17
17.2 Inspecting and Maintaining the KombiTool
. . . . . . . . .
17
17.3 Lubricating the Gearbox
. . . . . . . . . . . . . . . . . . . . . . . . . . .
17
17.4 Removing and Mounting the Blades
. . . . . . . . . . . . . . . .
18
17.5 Repositioning the Blades
. . . . . . . . . . . . . . . . . . . . . . . . . . .
19
17.6 Sharpening the Blades
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
18 Specifications
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
18.1 STIHL RG-KM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
18.2 Blades
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
18.3 Symbols on the KombiTool
. . . . . . . . . . . . . . . . . . . . . . . . .
20
18.4 Engineering Improvements
. . . . . . . . . . . . . . . . . . . . . . . . .
20
19 Approved KombiEngines/KombiMotors
. . . . . . . . . . . . .
20
19.1 STIHL RG-KM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
20 Replacement Parts and Equipment
. . . . . . . . . . . . . . . . .
20
20.1 Genuine STIHL Replacement Parts
. . . . . . . . . . . . . . . .
20
21 Disposal
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
21.1 Disposal of the Power Tool
. . . . . . . . . . . . . . . . . . . . . . . .
20
0458-811-8221-A
2
English
1 Introduction
Thank you for your purchase. The information contained in
this manual will help you receive maximum performance and
satisfaction from your KombiTool and, if followed, reduce the
risk of injury from its use.
In the STIHL KombiSystem, this KombiTool can be
combined with a STIHL KombiEngine (gas-powered) or a
STIHL KombiMotor (battery-powered), @ 19.
In this instruction manual, "power tool" is used to designate
the tool formed by the combination of a STIHL
KombiEngine/KombiMotor and this STIHL KombiTool.
STIHL KombiEngines/KombiMotors are sold separately.
Always read and follow the safety precautions and warnings
found in this manual and the manual for the
KombiEngine/KombiMotor. They must be used together.
Keep them in a safe place for future reference.
SAVE THIS MANUAL!
Have your authorized STIHL servicing dealer show you how
to operate your power tool.
Do not lend or rent the power tool without this instruction
manual and the manual for the KombiEngine/KombiMotor.
Allow only persons who fully understand the information in
the instruction manuals to operate the power tool.
For further information, or if you do not understand any of
the instructions in this manual or the manual for the
KombiEngine/KombiMotor, please go to www.stihl.ca or
contact your authorized STIHL servicing dealer.
WARNING
Use your power tool only for the applications described in
this instruction manual and the manual of the
KombiEngine/KombiMotor you are using. Do not use it for
other purposes, since misuse may result in personal injury
or property damage, including damage to the machine.
WARNING
Always wear proper protective apparel and eye protection.
Bystanders, especially children, and animals should not be
allowed in the work area where the power tool is in use.
In the STIHL KombiSystem, a KombiEngine (gas-powered)
or KombiMotor (battery-powered) can be combined with an
assortment of KombiTools to produce different power tools.
In this instruction manual, "power tool" is used to designate
the tool formed by the combination of the
KombiEngine/KombiMotor and the STIHL KombiTool.
The instruction manual for your KombiMotor may call for
specific precautions to prevent unintended activation of the
power tool. Switching off the KombiMotor and removing the
connecting cord, for example, may be necessary to reduce
the risk of unintended activation. See the manual for your
KombiMotor for further information.
1Introduction
Because this KombiTool is part of a high-speed
power tool, special safety precautions must be
observed to reduce the risk of personal injury.
Read this instruction manual and the instruction
manual for your KombiEngine/KombiMotor
thoroughly before use and periodically
thereafter. Follow all safety precautions.
Careless or improper use can cause serious or
fatal injury.
2 KombiSystem
+
.
.
.
.
0000-GXX-6231-A0
0458-811-8221-A
3
English
3 Guide to Using this Manual
Always read and follow the safety precautions and warnings
found in this manual and the manual for the
KombiEngine/KombiMotor. Both manuals must be used
together. Keep them in a safe place for future reference.
3.1 Signal Words
This manual contains safety information that requires your
special attention. Such information is introduced with the
following symbols and signal words:
DANGER
Indicates a hazardous situation that, if not avoided, will
result in death or serious injury.
WARNING
Indicates a hazardous situation that, if not avoided, could
result in death or serious injury.
NOTICE
Indicates a risk of property damage, including damage to the
machine or its individual components.
3.2 Symbols in Text
The following symbol is included to assist you with the use
of the manual:
4.1 KombiTool
1 Machine Support
For resting the KombiTool on the ground.
2Blades
Metal blades for cutting and removing weeds, grass and
similar vegetation.
3 Rider Plate
Covers the blade mount.
4Protective Cap
Keeps dust and debris out of the drive tube when the
KombiTool is not connected to the Kombi powerhead.
5Marker
Defines the proper attachment depth when the
KombiTool is inserted in the coupling sleeve of the
KombiEngine/KombiMotor.
6Drive Tube
Connects the KombiTool to the
KombiEngine/KombiMotor.
7Screw
Secures the rider plate to the KombiTool.
3 Guide to Using this Manual
Refers to a designated chapter or sub-chapter in this
instruction manual.
4 Main Parts
5
4
2
1
8
7
9
10
11
3
6
0000-GXX-8731-A1
0458-811-8221-A
4
English
5 Safety Symbols on the Product
8 Transport Guard
Designed to reduce the risk of injury from contact with
the blades while transporting the unit.
9 Blade Mount
Serves to secure the blades.
10 Gearbox
Covers the transmission system.
11 Screw Plug
Seals the grease filler opening at the gearbox.
5.1 KombiTool
The following safety symbols are found on the KombiTool:
6.1 Intended Use
WARNING
The RG-KM is used in combination with a
STIHL KombiEngine/KombiMotor. It is designed for
cutting and removing weeds, grass and similar material.
Use of the KombiTool for operations different than
intended could result in serious injury or death.
Use only an approved
STIHL KombiEngine/KombiMotor, @ 19.
Use your RG-KM only as described in this instruction
manual and the instruction manual for the
STIHL KombiEngine/KombiMotor you are using.
Use it only for authorized applications.
Cut and remove weeds, grass and similar material
only. Do not use the KombiTool for cutting brush,
shrubs, bushes or other types of heavy vegetation.
Improper use could result in personal injury or property
damage, including damage to the power tool.
Use the power tool only as described in this manual.
Never attempt to modify or override the power tool's
controls or safety devices in any way.
5 Safety Symbols on the Product
To reduce the risk of injury, follow the specified
safety precautions.
Read and follow all safety precautions in the
instruction manual. Improper use can lead to
serious or fatal personal injury or property
damage.
To reduce the risk of eye injury, always wear
proper eye protection. Power tool noise may
damage your hearing. Always wear proper sound
barriers (ear plugs or ear mufflers) to protect
your hearing, @ 6.3.
Wear sturdy boots with non-slip soles. Wear
steel-toed safety boots, @ 6.3.
Always wear non-slip, heavy-duty work gloves
(e.g. made of leather or other wear resistant
material) when handling the machine or metal
cutting attachments, @ 6.3.
To reduce the risk of cut injuries, keep hands,
feet and other body parts away from the blades,
@ 6.5.4.
To reduce the risk of personal injury
from thrown objects, keep bystanders
at least 17 ft. (5 m) away, @ 6.5.4.
The gearbox becomes hot during operation. To
reduce the risk of burn injury, avoid contacting
the gearbox while it is still hot following
operation, @ 7.
6 IMPORTANT SAFETY
INSTRUCTIONS
5 m (17 ft)
0458-811-8221-A
5
English
6 IMPORTANT SAFETY INSTRUCTIONS
Never use a power tool that has been modified or
altered from its original design.
6.2 Operator
WARNING
Working with the power tool can be strenuous. The
operator must be in good physical condition and mental
health. To reduce the risk of personal injury from fatigue
and loss of control:
Check with your doctor before using the power tool
if you have any health condition that may be
aggravated by strenuous work.
Do not operate the power tool while under the
influence of any substance (drug, alcohol or
medication, etc.) that might impair vision, balance,
dexterity or judgment.
Be alert. Do not operate the power tool when you are
tired. Take a break if you become tired.
Do not permit minors to use the power tool.
6.3 Personal Protective Equipment
WARNING
Loss of control and severe cut injuries may result if hair,
clothing or apparel make contact with the moving blades
or otherwise become entangled in the components of the
power tool. To reduce the risk of severe personal injury:
Avoid loose-fitting jackets, scarves, neckties, flared
or cuffed pants, jewelry and any other apparel that
could be caught on branches, brush or the moving
cutting/working attachment.
Secure hair above shoulder level before starting
work.
To reduce the risk of eye injury:
Prolonged exposure to power tool noise may result in
permanent hearing damage. To reduce the risk of hearing
damage:
Good footing is very important. To help maintain a secure
footing and reduce the risk of injury while working:
To improve your grip and help protect your hands:
Requirements for personal protective equipment depend
on the specific KombiEngine/KombiMotor you are using.
For further instructions on proper work clothing and
personal protective equipment, read and follow the
safety precautions in the instruction manual for your
KombiEngine/KombiMotor before starting work.
Wear sturdy and snug-fitting clothing that
also allows complete freedom of
movement.
Wear overalls or long pants made of
heavy material to help protect your legs.
Do not wear shorts.
Always wear goggles or close-fitting
protective glasses with adequate side
protection that are impact-rated and
marked as complying with CSA Z94.
Wear sound barriers (ear plugs or ear
muffs).
Regular operators should have their
hearing checked periodically.
Be particularly alert and cautious when
using hearing protection. Your ability to
hear shouts, alarms or other audible
warnings is restricted.
Wear substantial footwear with non-slip
soles. Do not wear sandals, flip-flops,
open-toed or similar footwear. Wear
steel-toed safety boots.
Always wear heavy-duty, non-slip work
gloves made of leather or another wear-
resistant material when handling the
power tool or its blades.
0458-811-8221-A
6
English
6 IMPORTANT SAFETY INSTRUCTIONS
6.4 KombiTool
WARNING
To reduce the risk of serious laceration injuries:
To reduce the risk of personal injury to bystanders and
unauthorized users:
Never leave the power tool unattended.
Although certain unauthorized blades may fit your
KombiTool, their use may be extremely dangerous.
Use only blades supplied or expressly approved by
STIHL.
Never modify this KombiTool in any way.
Never use a KombiTool that has been modified or
altered from its original design.
For a list of KombiEngines/KombiMotors authorized
by STIHL for your unit, see Chapter @ 19 of this
instruction manual or the STIHL "Cutting
Attachments, Parts & Accessories" catalog,
available from your dealer or www.stihl.ca.
If the power tool is dropped or subjected to similar heavy
impacts:
Check that it is undamaged, in good condition and
functioning properly before continuing work.
Check that the controls and safety devices are
working properly.
Never work with a damaged or malfunctioning power
tool. In case of doubt, have the power tool checked
by your authorized STIHL servicing dealer.
If the power tool is damaged, not working properly, has
been left outdoors or dropped into water or other liquid, its
components may no longer function properly and safety
devices may be inoperative. To reduce the risk of personal
injury and property damage:
Take the power tool to your authorized STIHL
servicing dealer to be checked before further
operation.
Genuine STIHL replacement parts are specifically
designed to match your power tool and meet safety and
performance requirements. Use of parts that are not
authorized or approved by STIHL may cause serious or
fatal injury or property damage.
STIHL recommends that only identical replacement
parts be used.
6.5 Using the Power Tool
6.5.1 Before Operation
WARNING
Misuse or unauthorized use may result in personal injury
and property damage.
Use the power tool only as described in this
instruction manual and the instruction manual for
your KombiEngine/KombiMotor.
The KombiTool must be properly installed and tightened
before starting work. Failure to use the proper parts to
mount the KombiTool and its blades will increase the risk
of personal injury to the operator and bystanders.
Read and follow the instructions on mounting the
KombiTool and its blades in this instruction manual.
Never mount the blades to the KombiTool without
the proper installation of all required parts (e.g.,
screws, rider plate, etc.).
Before starting work, inspect for loose parts (nuts,
screws, etc.) and for cracked, bent, warped or
damaged blades.
Replace damaged blades before using the power
tool.
Keep hands, feet and other parts of your
body away from the KombiTool and its
blades.
Never touch the moving blades with your
hand or any other part of your body.
0458-811-8221-A
7
English
6 IMPORTANT SAFETY INSTRUCTIONS
Always keep the blades sharp.
Using a KombiTool that is modified, damaged, improperly
adjusted or maintained, or not completely and securely
assembled can lead to a malfunction and increase the risk
of serious personal injury or death.
Never operate a KombiTool that is modified,
damaged, improperly maintained or not completely
and securely assembled.
Always check your unit for proper condition and
operation before starting work.
If your KombiTool or any part is damaged or does
not function properly, take it to your authorized
STIHL servicing dealer. Do not use the unit until the
problem has been corrected.
Before switching on or starting your power tool, take the
following steps to reduce the risk of personal injury from
thrown objects, loss of control or inadvertent contact with
the blades:
Be sure that the KombiTool and its blades are clear
of you and all other obstructions and objects,
including the ground.
Read and follow the instructions for switching
on/starting the power tool in the manual for the
KombiEngine/KombiMotor being used.
6.5.2 Holding and Controlling the Power Tool
WARNING
To maintain a firm grip and properly control your power
tool:
Keep the handles clean and dry at all times. Keep
them free of moisture, pitch, oil, grease and resin.
Operating the power tool with one hand may lead to loss
of control and is extremely dangerous. To reduce the risk
of serious or fatal injury to the operator or bystanders from
loss of control:
Never attempt to operate the power tool with one
hand.
To reduce the risk of serious or fatal injuries to the
operator or bystanders from loss of control:
Always hold the power tool firmly with both hands
when you are working.
Wrap your fingers tightly around the handles,
keeping the handles cradled between your thumb
and forefinger (see illustration of the KMA 130).
During operation, the operator's right hand must grip
the rear handle and the operator's left hand must
hold the front handle (see illustration of the KMA
130). This applies to all operators, even those who
are left-handed.
Position the power tool so that all parts of your body
are clear of the KombiTool and its blades.
0000-GXX-4644-A0
0458-811-8221-A
8
English
6 IMPORTANT SAFETY INSTRUCTIONS
The operator must mount the loop handle and barrier
bar as instructed in the manual for the
KombiEngine/KombiMotor being used.
The operator must use a harness.
Working with the blades above ground level or
perpendicular to the ground increases the risk of severe
injury from thrown objects. It also exposes more of the
blades and makes the unit more difficult to control,
increasing the risk of injury. To reduce the risk of serious
or fatal injury from loss of control or thrown objects:
Keep the blades at ground level, parallel to the
ground.
To reduce the risk of serious or fatal injuries from contact
with the blades:
Do not touch the blades while the KombiEngine is
running or the KombiMotor is connected to a battery.
To reduce the risk of serious or fatal cut injuries to the
operator or bystanders from loss of control, keep proper
footing and balance at all times:
Make sure you have good balance and a secure
footing at all times.
Take special care in overgrown or wet terrain and
always watch for hidden obstacles such as tree
stumps, roots, rocks, holes and ditches to avoid
stumbling or falling.
Be extremely cautious when working on slopes or
uneven ground.
For better footing, always clear away fallen
branches, scrub, cuttings and other material, objects
or vegetation that can increase the danger of
slipping, tripping or falling.
Never operate above waist height.
Do not overreach.
The power tool should be balanced for proper control and
less fatigue during operation.
Adjust the position of the loop handle and/or harness
to achieve and maintain a comfortable and effective
working position in accordance with the instructions
found in the manual for the
KombiEngine/KombiMotor being used.
6.5.3 Working Conditions
WARNING
Operate your power tool only under good visibility during
favorable daylight conditions.
Postpone the work if the weather is windy, foggy,
rainy or inclement.
Your power tool is a one-person machine.
Bystanders, especially children, and animals should
not be allowed in the area where it is in use.
Switch it off immediately if you are approached.
To reduce the risk of injury to bystanders and
unauthorized users:
Shut off the KombiEngine or switch off the
KombiMotor and remove the connecting cord before
work breaks and any other time the power tool is not
in use. Never leave the unit unattended.
Sparks generated from operation of the power tool may be
capable of igniting combustible gases, liquids, vapors,
dusts or other combustible materials and substances. To
reduce the risk of fire and explosion:
Never operate the power tool in a location where
combustible gases, liquids, vapors, dusts or other
combustible materials and substances are present.
Read and follow recommendations issued by
government authorities (e.g., CCOHS) for identifying
and avoiding the hazards of combustible gases,
liquids, vapors, dusts or other combustible materials
and substances.
Keep hands, feet and other body parts
away from the blades.
Never touch the moving blades with your
hand or any other part of your body.
0458-811-8221-A
9
English
6 IMPORTANT SAFETY INSTRUCTIONS
If the moving blades strike a rock or other hard object,
sparks may be created, which can ignite flammable
materials under certain circumstances. Flammable
materials can include dry vegetation and brush,
particularly when weather conditions are hot and dry.
When there is a risk of fire or wildfire, do not use the
KombiTool around flammable materials or around
dry vegetation or brush.
Contact your local fire authorities or the U.S. Forest
Service if you have any question about whether
vegetation and weather conditions are suitable for
the use of a metal blade.
STIHL does not recommend the use of the
KombiTool when cutting in rocky areas or in areas
with debris or other objects that could create sparks.
Use of this power tool can generate dust and other
substances containing chemicals known to cause
respiratory problems, cancer, birth defects and other
reproductive harm.
Consult governmental agencies such as ECCC,
CCOHS and PHAC and other authoritative sources
on hazardous materials if you are unfamiliar with the
risks associated with the particular substances you
are cutting or with which you are working.
Inhalation of certain dusts, especially organic dusts such
as mold or pollen, can cause susceptible persons to have
an allergic or asthmatic reaction. Substantial or repeated
inhalation of dust or other airborne contaminants,
especially those with a smaller particle size, may cause
respiratory or other illnesses.
Control dust at the source where possible.
To the extent possible, operate the power tool so
that the wind or operating process directs any dust,
mist or other particulate matter raised by the power
tool away from the operator.
When respirable dust or other particulate matter
cannot be kept at or near background levels, always
wear a respirator that is approved by PHAC and
rated for worksite-specific conditions. Follow the
recommendations of governmental authorities (e.g.,
CCOHS/PHAC/MSHA) and occupational and trade
associations.
If the vegetation being cut or the surrounding ground is
coated with a chemical substance, such as a pesticide or
herbicide:
Read and follow the instructions and warnings that
accompanied the substance coating the vegetation
or surrounding ground.
6.5.4 Operating Instructions
WARNING
In the event of an emergency, shut off the KombiEngine or
switch off the KombiMotor and remove the connecting
cord immediately.
The blades will continue to move for a short period after
the power tool is switched off. To reduce the risk of serious
personal injury from contact with the blades:
Wait for the blades to stop before walking with the
unit or putting it down.
The moving blades may fling foreign objects directly or by
ricochet. Thrown objects, including broken blades, may
cause serious or fatal injury to the operator or bystanders.
To reduce the risk of severe personal injury:
Inspect the work area. Remove stones, glass, rocks,
pieces of metal or other objects that could be thrown
by the blades, damage the blades or cause personal
injury or damage to property (e.g., parked vehicles,
windows).
To reduce the risk of damage to property, also
maintain a distance of 10 ft. (3 m) from objects such
as vehicles and windows.
Always wear proper eye
protection and keep bystanders
at least 17 ft. (5 m) away from
the work area. Any persons who
must enter the restricted area
must also wear proper eye
protection.
5 m (17 ft)
0458-811-8221-A
10
English
6 IMPORTANT SAFETY INSTRUCTIONS
Maintaining the minimum distances cannot eliminate
the potential risk of personal injury and property
damage from thrown objects.
Shut off the KombiEngine or switch off the
KombiMotor and remove the connecting cord
immediately if you are approached while working
with the power tool.
There is an increased risk of objects being thrown if
cutting performance deteriorates or cuttings frequently
become jammed. This can result in personal injury.
Sharpen the blades as described in this instruction
manual.
Use of non-approved KombiEngines/KombiMotors or
blades could be extremely dangerous.
Use only the KombiEngines/KombiMotors and
blades recommended in this manual. See Approved
KombiEngines/KombiMotors, @ 19.
To reduce the risk of serious or fatal cut injuries to the
operator or bystanders from blade contact:
To reduce the risk of severe personal injuries from
unintentional starting:
Never touch the KombiTool or its blades with your
hands, feet or any other part of your body while the
KombiEngine is running or the KombiMotor is
connected to a battery.
Before inspecting, adjusting or cleaning a dirty,
clogged or stuck KombiTool, always shut off the
KombiEngine or switch off the KombiMotor and
remove the connecting cord, and make sure the
KombiTool and its blades have stopped.
A damaged or loose KombiTool or blades may vibrate,
crack, break or come off during operation, which may
result in serious or fatal injury.
Make sure the KombiTool and its blades are sharp
and properly tightened before starting work.
Check the tightness and condition of the KombiTool
and its blades before starting work and any time
cutting behavior changes during use. Wait for the
KombiTool and its blades to stop before inspecting
or cleaning the power tool.
Check the blades at regular short intervals during
operation, or immediately if there is a change in
cutting behavior.
If the blades loosen after being properly tightened,
stop work immediately and have the unit inspected
by your authorized STIHL servicing dealer.
Cracked, damaged or worn out blades may shatter at high
speeds and cause serious or fatal injury.
Replace cracked, bent, warped, damaged, dull or
worn out blades immediately, even if damage
appears to be limited to superficial cracks.
Never use a power tool with a loose or damaged
KombiTool or blades.
To reduce blade friction and the buildup of dirt, which can
interfere with the proper functioning of the power tool:
STIHL recommends that you spray the blades with a
resin solvent, such as STIHL Resin Remover and
Lubricant, before starting work.
Keep hands, feet and other body parts
away from the blades.
Do not touch the blades while the
KombiEngine is running or the
KombiMotor is connected to a battery.
Never touch moving blades with your
hand or any other part of your body.
Shut off the KombiEngine or switch off
the KombiMotor and remove the
connecting cord before attempting to
remove trimmings or jammed material.
0458-811-8221-A
11
English
7 Maintenance, Repair and Storage
DANGER
To reduce risk of electrocution:
7.1 Warnings and Instructions
WARNING
There are no user-authorized repairs for the KombiTool.
To reduce the risk of fire, electric shock or other personal
injury and property damage:
Users may carry out only the cleaning and
maintenance operations described in this manual.
Strictly follow the cleaning and maintenance
instructions in the appropriate sections of this
instruction manual.
Never attempt to repair a damaged or broken
KombiTool or blades. This may cause broken parts
to come off and result in serious or fatal injuries.
Wear non-slip, heavy-duty work gloves when
handling the blades.
STIHL recommends that all repair or replacement
work be performed by authorized STIHL servicing
dealers.
To reduce the risk of personal injury and property damage
from unintentional starting:
Shut off the KombiEngine or switch off the
KombiMotor and remove the connecting cord before
inspecting the power tool or carrying out any
cleaning, maintenance or repair work and before
storing, and any other time the power tool is not in
use.
Use of parts that are not authorized or approved by STIHL
may cause serious or fatal injury or property damage.
STIHL recommends that only identical STIHL
replacement parts be used.
To reduce the risk of serious or fatal injuries from loose or
damaged blades:
Keep blades sharp.
Tighten all nuts, bolts and screws after each use.
Never repair damaged blades by welding,
straightening or modifying the shape. Always
replace damaged blades before use.
The gearbox becomes hot during operation. To reduce the
risk of burn injury:
Improper storage can result in unauthorized use, damage
to the power tool and other personal injury or property
damage.
Store the power tool indoors in a dry, secure place
that cannot be accessed by children or other
unauthorized users.
Attach the transport guard to the blades.
8.1 Preparing the KombiTool for Operation
Before starting work:
Mount and adjust the loop handle and barrier bar at the
KombiEngine/KombiMotor, @ 9.1
Connect the drive tube to the gearbox, @ 9.2.
Never operate this power tool in the
vicinity of any wires or cables that may
be carrying electric current.
Do not rely on the power tool's insulation
against electric shock.
7 Maintenance, Repair and Storage
Allow the gearbox to cool before
inspecting or lubricating and before
changing the blades. Avoid contacting
the gearbox while it is still hot following
operation.
8 Before Starting Work
0458-811-8221-A
12
English
9 Assembling the Power Tool
Mount the KombiTool, @ 9.3.1.
Check the blades for damage or other problems.
Tighten all nuts, bolts and screws.
9.1 Mounting and Adjusting the Loop Handle and
Barrier Bar
WARNING
To reduce the risk of injury from loss of control, ensure that
the loop handle and barrier bar are properly and securely
mounted to the KombiEngine/KombiMotor you are using
before starting work.
To mount the loop handle and barrier bar:
Mount and adjust the loop handle and barrier bar as
described in the manual of the KombiEngine/KombiMotor
you are using.
9.2 Connecting the Drive Tube to the Gearbox
To connect the drive tube to the gearbox:
Pull the protective caps (1) off both ends of the drive
tube (2).
Loosen the screw (6).
Push the drive tube (2) into the gearbox (5) and rotate it
until the gear shaft (4) engages.
Tighten the screw moderately.
Align the drive tube so that the lug (3) faces up.
Tighten down the screw firmly.
The drive tube need not be removed again.
9.3 Mounting and Removing the KombiTool
9.3.1 Mounting the KombiTool
To mount the KombiTool:
Loosen the wing screw (1) on the coupling sleeve (2).
Line up the lug (4) on the KombiTool with the slot (3) on
the coupling sleeve.
Push the drive tube (5) into the coupling sleeve until the
red line (6) is flush with the coupling sleeve.
Tighten down the wing screw firmly.
9.3.2 Removing the KombiTool
To remove the KombiTool:
Attach the transport guard to the blades.
Loosen the wing screw.
Pull the drive tube out of the coupling sleeve.
9 Assembling the Power Tool
6
2
4
5
31
2
1
0000-GXX-8735-A1
2
4
1
5
3
6
1
2
0000-GXX-4689-A0
0458-811-8221-A
13
English
10 Using a Harness
10.1 Putting on and Adjusting the Single Harness
WARNING
To reduce the risk of injury from loss of control and contact
with the blades, always wear a proper harness.
You must install the barrier bar, wear a proper harness and
always grip the rear handle with your right hand and front
handle with your left hand. That means you must place the
single harness over your left shoulder when working with
this KombiTool.
To fit and adjust the single harness:
Shut off the KombiEngine or switch off the KombiMotor
and remove the connecting cord.
Adjust the length of the harness strap (1) so that the
carabiner (2) is about a hand’s width below the top of your
hip.
Attach the carabiner to the carrying ring (3) on the
KombiEngine/KombiMotor.
For battery powered KombiMotors there are also other types
of battery harnesses available. They are described in the
KombiMotor manual.
11.1 Checking the Blades
Before starting work, check the blades for damage and
excessive wear, @ 18.2.
Shut off the KombiEngine or switch off the KombiMotor
and remove the connecting cord.
Measure the following points on the blades:
Length a
Width b
–Angle c
If the minimum length (a) is less than 0.4 in. (10 mm):
Reposition the blades, @ 17.5.
If the minimum width (b) is less than 0.2 in. (5 mm):
Replace the blades, @ 17.4.
If the filing angle (c) is not 45°: Sharpen the blades,
@ 17.6.
If you have any questions: Contact a STIHL servicing
dealer for assistance.
10 Using a Harness
1
2
3
0000-GXX-3925-A0
1
2
11 Checking the KombiTool
a
b
c
0000-GXX-8740-A0
0458-811-8221-A
14
English
12 During Operation
12.1 Using the KombiTool
WARNING
To reduce the risk of serious or fatal injuries to the operator
or bystanders, keep hands, feet and other parts of the body
away from the blades, @ 6.5.2. Do not touch the blades
while the KombiEngine is running or the KombiMotor is
connected to a battery. Never touch the moving blades with
your hand or any part of your body, @ 6.5.4.
WARNING
Always wear proper clothing and protective apparel,
including proper eye protection, when operating your power
tool, @ 6.3. Keep bystanders at least 17 ft. (5 m) away from
the work area, @ 6.5.4. Work carefully and maintain proper
control of the power tool, @ 6.5.2.
The power tool is designed for two-handed operation.
During operation, the operator's right hand must grip the
rear handle and the operator's left hand must hold the front
handle. This applies to all operators, even those who are
left-handed.
Keep the unit parallel to the ground and push the cutting
blades forward carefully in a controlled manner, as
depicted in the illustration, above.
Move forward slowly, keeping two hands on the unit at all
times.
Observe all applicable laws, regulations, standards and
ordinances.
13.1 Preparing for Transportation or Storage
WARNING
To reduce the risk of personal injury from unintended
activation or unauthorized use, shut off the KombiEngine or
switch off the KombiMotor and remove the connecting cord
and ensure the KombiTool and its blades have stopped
before transporting the power tool or putting it down.
To prepare the KombiTool for transportation or storage:
Shut off the KombiEngine or switch off the KombiMotor
and remove the connecting cord.
Attach the transport guard to the blades.
If the KombiTool became wet during operation, allow it to
dry completely before storing.
14.1 Transporting the KombiTool
WARNING
To reduce the risk of injury from loss of control and contact
with the blades, never carry or transport your power tool with
the blades moving, @ 6.5.4. Ensure the blades have
stopped before setting the power tool down, @ 6.5.4.
WARNING
Attach the transport guard to help reduce the risk of cut
injuries from inadvertent contact. Remove the transport
guard before starting work.
12 During Operation
0000-GXX-8737-A0
13 After Finishing Work
14 Transporting
0458-811-8221-A
15
English
15 Storing
When transporting the power tool:
Always transport the power tool in accordance with the
instructions found in this manual and the manual for the
KombiEngine/KombiMotor being used.
When transporting the KombiTool by hand, hold the drive
tube so that the unit remains parallel to the ground. Keep
the blades pointing backwards, opposite the direction in
which you are walking.
When transporting the KombiTool in a vehicle, secure and
position it to prevent turnover, impact and damage.
15.1 Storing the KombiTool
WARNING
Store the KombiTool indoors in a dry, secure place that is
inaccessible to children and other unauthorized users, @ 7.
Improper storage can result in unauthorized use and
damage to the KombiTool, @ 7.
When storing the KombiTool:
Remove the KombiTool from the
KombiEngine/KombiMotor.
Clean and inspect the KombiTool and its blades, @ 16.
Store the KombiTool indoors in a dry and secure location,
out of the reach of children and other unauthorized
persons.
16.1 Cleaning the KombiTool
WARNING
To reduce the risk of personal injury from unintended
activation, remove the KombiTool before carrying out any
cleaning work, @ 7. Users of this KombiTool should carry
out only the cleaning described in this manual.
To clean the KombiTool:
Clean polymer components with a slightly dampened
cloth. Do not use detergents or solvents, which may
damage the polymer components.
Do not use a pressure washer to clean the unit or
otherwise spray it with water or other liquids.
NOTICE
Never spray the KombiTool with water. Spraying it with a
stream of water could result in damage.
16.2 Cleaning the Blades
WARNING
To reduce the risk of personal injury from unintended
activation, shut off the KombiEngine or switch off the
KombiMotor and remove the connecting cord before
carrying out any cleaning work, @ 7. Users of this
KombiTool should carry out only the cleaning described in
this manual. To help prevent injuries, always wear heavy-
duty work gloves when handling the KombiTool or its blades,
@ 6.3.
To clean the blades:
Spray both sides of the blades with a resin solvent, such
as STIHL Resin Remover and Lubricant.
Switch on the power tool for a few seconds to evenly
distribute the resin solvent throughout the blades.
15 Storing
16 Cleaning
0458-811-8221-A
16
English
16 Cleaning
Do not use a pressure washer to clean the blades or spray
them with water or other liquids.
0458-811-8221-A
17
English
17 Inspection and Maintenance
17.1 Inspection and Maintenance Chart
17.2 Inspecting and Maintaining the KombiTool
WARNING
To reduce the risk of personal injury from unintended
activation, shut off the KombiEngine or switch off the
KombiMotor and remove the connecting cord before
inspecting the KombiTool or carrying out any maintenance,
@ 7. Carry out only the maintenance operations described
in this manual. There are no user-authorized repairs. STIHL
recommends that repair work be performed by authorized
STIHL servicing dealers.
To properly maintain the KombiTool:
Lubricate the gearbox.
Sharpen the blades.
Reposition the blades if they are partially worn, @ 17.5.
Replace the blades if they are completely worn, @ 17.4.
Replace the blades if even one segment is excessively
worn, broken or damaged.
Have worn, missing or damaged safety labels replaced by
an authorized STIHL servicing dealer.
If you make a warranty claim for a component that has not
been serviced or maintained properly, coverage may be
denied.
17.3 Lubricating the Gearbox
WARNING
The gearbox becomes hot during operation. To reduce the
risk of burn injury, avoid contacting the gearbox while it is
still hot following operation. Wait for the gearbox to cool
down before performing this operation.
17 Inspection and Maintenance
Shut off the KombiEngine or switch off the KombiMotor and remove the connecting cord before carrying out any inspection,
cleaning or maintenance.
The following maintenance intervals are examples and apply for normal operating
conditions. Actual use and your experience will determine the frequency of required
inspection and maintenance.
Before starting
work
After finishing work
or daily
Every 25 working
hours
Relevant Chapter
KombiTool Visual inspection XX
Clean X @ 16
Gearbox Lubricating X @ 17.3
Blades Visual inspection XX
0458-811-8221-A
18
English
17 Inspection and Maintenance
To lubricate the gearbox:
Remove the screw plug (2).
If no grease can be seen on the inside of the screw plug,
screw the tube (1) of STIHL gear lubricant into the filler
hole.
Squeeze no more than 0.2 oz (5 g) of STIHL gear
lubricant into the gearbox.
Remove the tube of STIHL gear lubricant.
Insert the screw plug and tighten it down firmly.
NOTICE
Do not completely fill the gearbox with grease.
17.4 Removing and Mounting the Blades
17.4.1 Removing the Blades
WARNING
The blades have many sharp cutting edges. If they contact
your flesh, they will cut you, even if the blades are not
moving. Always wear heavy-duty work gloves when
removing or otherwise handling the blades, @ 6.3.
WARNING
Blades that are damaged or loose may vibrate, crack, break
or come off the unit, which may result in serious or fatal
injury or property damage. Make sure the blades are
properly tightened and in good condition before starting
work, @ 6.5.4.
To remove the blades:
Shut off the KombiEngine or switch off the KombiMotor
and remove the connecting cord.
Position the unit so that you are facing the underside of
the blade mount.
Remove the screw (1) by turning it clockwise.
Remove the rider plate (2).
Remove the screws (3) by turning them counterclockwise.
Remove the bottom blade (4).
Remove the screws (5) by turning them counterclockwise.
Remove the top blade (6).
17.4.2 Mounting the Blades
To mount the blades:
Shut off the KombiEngine or switch off the KombiMotor
and remove the connecting cord.
2
1
0000-GXX-8739-A0
2
1
6
4
3
5
0000-GXX-8733-A0
5
6
3
4
1
2
0000-GXX-8734-A0
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

STIHL RG-KM Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues