STIHL FBD-KM
Instruction Manual
Notice d’emploi
Original Instruction ManualPrinted on chlorine-free paper
Printing inks contain vegetable oils, paper can be recycled.
© ANDREAS STIHL AG & Co. KG, 2020
0458-590-8221-A. VA1.J20.
0000006282_010_GB
FBD-KM
English
1
This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process
with electronic systems.
Contents
Dear Customer,
Thank you for choosing a quality
engineered STIHL product.
It has been built using modern
production techniques and
comprehensive quality assurance.
Every effort has been made to ensure
your satisfaction and trouble-free use of
the product.
Please contact your dealer or our sales
company if you have any queries
concerning this product.
Your
Dr. Nikolas Stihl
KombiSystem 2
Guide to Using this Manual 2
Safety Precautions and Working
Techniques 3
Using the Unit 7
Approved KombiEngines 9
Approved Cutting Attachments 9
Assembling the Unit 9
Mounting the KombiTool 10
Starting / Stopping the Engine 11
Storing the Machine 11
Replacing the Depth Wheel 12
Replacing the Skirt 12
Replacing the Cutting Blade 12
Checking and Replacing the Wear
Guard 14
Maintenance and Care 15
Main Parts 16
Specifications 17
Maintenance and Repairs 17
Disposal 18
FBD-KM
English
2
In the STIHL KombiSystem a number of
different KombiEngines and KombiTools
can be combined to produce a power
tool. In this instruction manual the
functional unit formed by the
KombiEngine and KombiTool is referred
to as the power tool.
Therefore, the separate instruction
manuals for the KombiEngine and
KombiTool should be used together for
the power tool.
Always read and and make sure you
understand both instruction manuals
before using your power tool for the first
time and keep them in a safe place for
future reference.
Pictograms
The meanings of the pictograms
attached to the machine are explained in
this manual.
Depending on the model concerned, the
following pictograms may be attached to
your machine.
Symbols in text
WARNING
Warning where there is a risk of an
accident or personal injury or serious
damage to property.
NOTICE
Caution where there is a risk of
damaging the machine or its individual
components.
Engineering improvements
STIHL's philosophy is to continually
improve all of its products. For this
reason we may modify the design,
engineering and appearance of our
products periodically.
Therefore, some changes, modifications
and improvements may not be covered
in this manual.
KombiSystem Guide to Using this Manual
Hot surfaces
FBD-KM
English
3
Use of Power Tool
Use your bed redefiner only for renewing
flowerbed edges.
Do not use the bed redefiner on hard
surfaces, e.g. asphalt, concrete, etc., or
in wet ground.
Do not use your power tool for any other
purpose because of the increased risk of
accidents.
General Notes
Observe all application local safety
regulations, standards and ordinances.
The use of noise emitting power tools
may be restricted to certain times by
national or local regulations.
If you have not used this type of power
tool before: Have your dealer or other
experienced user show you how to
operate your power tool or attend a
special course in its operation.
Minors should never be allowed to use a
power tool.
Keep bystanders, especially children,
and animals away from the work area.
The user is responsible for avoiding
injury to third parties or damage to their
property.
Lend or rent your power tool only to
persons who are familiar with this model
and its operation – do not lend of rent
your power tool without the
KombiEngine and KombiTool instruction
manuals.
To operate the power tool you must be
rested, in good physical condition and
mental health. If you have any condition
that might be aggravated by strenuous
work, check with your doctor before
operating a power tool.
Persons with pacemakers only: The
ignition system of your power tool
produces an electromagnetic field of a
very low intensity. This field may
interfere with some pacemakers. STIHL
recommends that persons with
pacemakers consult their physician and
the pacemaker manufacturer to reduce
any health risk.
Do not operate the power tool if you are
under the influence of any substance
(drugs, alcohol) which might impair
vision, dexterity or judgment.
To reduce the risk of accidents or injury,
put off the work in poor weather
conditions (rain, snow, ice, wind).
Clothing and Equipment
Wear proper protective clothing and
equipment.
Avoid clothing that could get caught on
branches or brush or moving parts of the
machine. Do not wear a scarf, necktie or
jewelry. Tie up and confine long hair
(e.g. with a hair net, cap, hard hat, etc.).
WARNING
Wear a face shield and make sure it is a
good fit. A face shield alone does not
provide adequate eye protection.
Wear hearing protection, e.g. earplugs
or ear muffs.
Safety Precautions and
Working Techniques
Special safety precau
-
tions must be observed
when working with this
bed redefiner because it
has a sharp cutting blade
that rotates at a very high
speed.
Always read and and
make sure you under
-
stand both instruction
manuals (KombiEngine
and KombiTool) before
using your power tool for
the first time and keep
them in a safe place for
future reference. Non-
observance of the safety
precautions may result in
serious or even fatal
injury.
Clothing must be sturdy
but allow complete free
-
dom of movement. Wear
snug-fitting clothing, an
overall and jacket combi
-
nation, do not wear a
work coat.
Wear steel-toed safety
boots with non-slip soles.
To reduce the risk of eye
injuries, wear snug-fitting
safety glasses in accord
-
ance with European
Standard EN 166. Make
sure the safety glasses
are a good fit.
FBD-KM
English
4
STIHL offers a comprehensive range of
personal protective clothing and
equipment.
The Power Tool
To avoid serious burn injuries, avoid
touching hot parts of the machine,
especially the surface of the muffler.
Never attempt to modify your power tool
in any way since this may increase the
risk of personal injury. STIHL excludes
all liability for personal injury and
damage to property caused while using
unauthorized attachments.
Transporting the Power Tool
Always stop the engine.
Carry the power tool properly balanced
by the drive tube – with the hot muffler
away from your body and the cutting
attachment pointing to the rear.
Transporting in a vehicle: Properly
secure your power tool to prevent
turnover, fuel spillage and damage.
Cleaning the Power Tool
Do not use a pressure washer to clean
the power tool. The solid jet of water
may damage parts of the power tool.
Do not immerse the power tool in water.
Always clean dust and dirt off the power
tool – do not use any grease solvents for
this purpose.
Clean plastic surfaces with a damp
cloth. Do not use aggressive detergents.
They may damage the plastic.
After finishing work, clean dirt, soil and
plant residue off the cutting attachment –
wear gloves to reduce the risk of injury.
After thoroughly cleaning, coat surface
of metal cutting attachments with a
corrosion inhibitor.
Storing the Power Tool
When the power tool is not in use, shut it
off so that it does not endanger others.
Secure it against unauthorized use.
Accessories and Spare Parts
Only use blades and accessories that
are explicity approved for this power tool
by STIHL or are technically identical. If
you have any questions in this respect,
consult a servicing dealer. Use only high
quality parts and accessories in order to
avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of original
STIHL replacement parts. They are
specifically designed to match your
model and meet your performance
requirements.
Operating the Power Tool
Before Starting Work
Check that your power tool is properly
assembled and in good condition – refer
to appropriate chapters in the
KombiEngine and KombiTool instruction
manuals.
– Blade: Correctly and securely
mounted and in good condition
(clean, move freely, not warped).
– Inspect the deflectors for damage or
wear. Do not operate the power tool
with a damaged deflector – replace
damaged parts.
– Never attempt to modify the controls
or safety devices – work only with a
properly mounted deflector.
– Keep the handles dry and clean –
free from oil and dirt – for safe
control of the power tool.
– Adjust the harness and handle(s) to
suit your height and reach.
To reduce the risk of personal injury, do
not operate your power tool if it is
damaged or not properly assembled.
If you use a shoulder strap or full
harness: Practice removing and putting
down the power tool as you would in an
Wear heavy-duty work
gloves made of durable
material (e.g. leather).
To reduce the risk of seri
-
ous burn injuries, avoid
touching hot parts of the
machine, including the
gearbox housing.
FBD-KM
English
5
emergency. To avoid damage, do not
throw the power tool to the ground when
practicing.
Clear scrub, cuttings, stones, solid
objects, etc. from the work area.
During Operation
Make sure you always have good
balance and secure footing.
In the event of impending danger or in
an emergency, switch off the engine
immediately by moving the slide control
/ stop switch/button to 0 or STOP.
Never leave a running power tool
unattended.
The cutting attachment may catch and
fling objects a great distance and cause
injury - therefore, do not allow any other
persons within a radius of 15 meters of
your own position. To reduce the risk of
damage to property, also maintain this
distance from other objects (vehicles,
windows). Even maintaining a distance
of 15 meters or more cannot exclude the
potential danger.
Note that the blade continues to run for
a period after you let go of the throttle
trigger – flywheel effect.
The correct engine idle speed is
important to ensure that the blade stops
moving when you let go of the throttle
trigger. Check and correct the idle speed
setting at regular intervals. If the blade
still rotates when the engine is idling,
have your dealer check your machine
and make proper adjustments or repairs
– see KombiEngine service manual.
The deflector on this bed redefiner
cannot protect the operator from all
objects thrown by the blade (stones,
glass, wire, etc.). Such objects may
ricochet and then hit the operator.
Take special care in slippery conditions,
on slopes or uneven ground.
Watch out for obstacles: Roots, tree
stumps or holes which could cause you
to trip or stumble.
Special care must be taken when
working in difficult, over-grown terrain.
Be particularly alert and cautious when
wearing hearing protection because
your ability to hear warnings (shouts,
alarms, etc.) is restricted.
To reduce the risk of accidents, take a
break in good time to avoid tiredness or
exhaustion.
Work calmly and carefully – in daylight
conditions and only when visibility is
good. Stay alert so as not to endanger
others.
Do not touch the cutting blade while the
engine is running. If the blade becomes
jammed by an obstruction, switch off the
engine immediately before attempting to
remove the obstruction.
15 m (50 ft)
To reduce the risk of
injury, avoid contact with
the blade.
To reduce the risk
of injury from
thrown objects,
never operate the
power tool without
the proper deflec
-
tor for the type of
cutting attachment
being used.
Inspect the work area:
Stones, pieces of metal
or other solid objects may
be thrown more than 15
meters and cause per
-
sonal injury or damage
the cutting attachment
and property (e.g. parked
vehicles, windows).
To avoid the risk of elec
-
tric shock, never use your
power tool in areas where
electrical lines are laid on
the surface or buried just
below the surface. Strik
-
ing and damaging such
lines with the CombiTool
could cause serious or
even fatal injury.
The gearbox becomes
hot during operation. To
reduce the risk of burn
injury, do not touch the
gearbox housing.
FBD-KM
English
6
Opening the throttle while the blade is
blocked increases the load and reduces
engine speed. The clutch then slips
continuously and this causes
overheating and damage to important
components (e.g. clutch, polymer
housing components) – and this can
increase the risk of injury from the blade
moving while the engine is idling.
If your power tool is subjected to
unusually high loads for which it was not
designed (e.g. heavy impact or a fall),
always check that it is in good condition
before continuing work – see also
"Before Starting Work". Make sure the
safety devices are working properly. Do
not continue operating your power tool if
it is damaged. In case of doubt, have the
unit checked by your servicing dealer.
Check the cutting blade at regular short
intervals during operation or
immediately if there is a noticeable
change in cutting behavior:
– Turn off the engine. Hold the power
tool firmly and press the blade into
the ground to bring it to a standstill.
– Check condition and tightness, look
for cracks.
– Replace a damaged blade
immediately, even if it has only
superficial cracks.
If a rotating metal cutting attachment
makes contact with a rock or other solid
object there is a risk of sparking which
may cause easily combustible material
to catch fire under certain
circumstances. Dry plants and scrub are
also easily combustible, especially in hot
and dry weather conditions. If there is a
risk of fire, do not use metal cutting
attachments near combustible
materials, dry plants or scrub. Always
contact your local forest authority for
information on a possible fire risk.
Clean the cutting attachment and
deflector at regular intervals during
operation.
– Shut off the engine.
– Wear gloves.
– Remove grass, weeds, clumps of
soil, etc.
To reduce the risk of injury, shut off the
engine before replacing the cutting
attachment.
Do not continue using or attempt to
repair a damaged or cracked blade by
welding or straightening – risk of out of
balance.
This may cause parts of the cutting
attachment to come off and hit the
operator or bystanders at high speed
and result in serious or fatal injuries.
After Finishing Work
After finishing work or before leaving the
unit unattended: Shut off the engine.
Holding and Controlling the Power Tool
Make sure you always have good
balance and secure footing.
Always hold the power tool firmly with
both hands on the handles. Left hand on
loop handle, right hand on control
handle, even if you are left-handed.
Wrap your fingers and thumbs around
the handles.
Pull the power tool, do not push it
forward. Always keep the power tool on
the left-hand side of your body with the
cutting attachment to the rear – maintain
a safe distance from the cutting
attachment at all times.
Maintenance and Repairs
Service the machine regularly. Do not
attempt any maintenance or repair work
not described in the KombiTool and
KombiEngine instruction manuals. Have
all other work performed by a servicing
dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
Only use high-quality replacement parts
in order to avoid the risk of accidents
and damage to the machine. If you have
any questions in this respect, consult a
servicing dealer.
STIHL recommends the use of genuine
STIHL replacement parts. They are
specifically designed to match your
model and meet your performance
requirements.
002BA547 KN
FBD-KM
English
7
To reduce the risk of injury, always shut
off the engine before carrying out any
maintenance or repairs or cleaning the
machine.
Cutting Attachments and Deflectors
The arrow on the deflector shows the
direction of rotation of the cutting blade –
see "Using the Power Tool".
The arrow on the deflector must always
point away from the operator. This
ensures that cuttings and other debris
are directed away from the power tool
and operator - see "Using the Unit".
Operate the power tool only with the skirt
properly mounted on the deflecfor – see
"Replacing the Skirt".
Handle the cutting blade with care – see
"Using the Unit".
Best cutting results: At full throttle
working at a steady pace.
STIHL recommends you use only
original STIHL cutting blades – see
"Special Accessories".
Only use deflectors or accessories that
are explicity approved for this power tool
by STIHL or are technically identical.
Your bed redefiner is suitable for
recutting existing flowerbed edges to
restore their sharp contours. Redefining
produces a sharp angled furrow.
N Always pull the power tool, do not
push it forward – work in the
direction shown by the arrow.
Preparations
WARNING
To reduce the risk of accidents or injury,
remove all obstacles and objects from
the work area.
N Plan the direction of cut – always
keep the power tool on the left-hand
side of your body with the cutting
attachment to the rear – maintain a
safe distance from the cutting
attachment at all times.
Adjusting Cutting Depth
N To reduce the risk of injury, shut off
the engine.
N Loosen the wingnut (1)
counterclockwise.
N Adjust the wheel (2): Upwards to
increase the depth of cut (A) or
downwards to reduce the depth of
cut (A).
9924BA001 KN
Using the Unit
9924BA030 KN
1
A
9924BA004 KN
2
FBD-KM
English
8
The depth of cut (A) depends on the
uneveness of the ground, your height
and normal working position. Therefore:
N move the wheel (2) so that the
blade (3) touches the ground in the
normal working position.
N Tighten down the wingnut
clockwise.
Redefining bed edges
The arrow (1) on the deflector indicates
the direction of operation.
The deflector is set at the factory with its
open side facing away from the
operator. This ensures that cuttings and
other debris are directed away from the
power tool and operator.
N Starting the Engine
N Start the cut at no less than half
throttle and continue cutting at full
throttle.
N Hold and guide your power tool so
that the blade is vertical.
N Cut steadily so that the engine is not
lugged down – do not apply force.
N Operate at no more than a normal
walking pace.
N Do not push the blade into the
ground.
N Always pull the power tool, do not
push it forward.
WARNING
Always keep the power tool on the left-
hand side of your body with the cutting
attachment to the rear – maintain a safe
distance from the cutting attachment at
all times.
N Cut at a steady pace to avoid having
to make several passes.
N Use the gunning sight (1) to line the
blade up with the edge of the bed.
3
9924BA005 KN
A
9924BA006 KN
9924BA031 KN
1
9924BA023 KN
9924BA027 KN
1
FBD-KM
English
9
Only use KombiEngines supplied or
explicitly approved by STIHL for use with
the attachment.
This KombiTool may be operated only in
combination with the following
KombiEngines:
STIHL KM 90 R, KM 94 R, KM 110 R,
KM 130 R
1)
, KMA 130 R, KMA 135 R
WARNING
Loop-handled machines must be
equipped with a barrier bar.
1 Blade (marked 4180/00)
N Pull the protective caps off the ends
of the drive tube and keep them in a
safe place for later use – see
"Storing the Machine".
NOTICE
The plug may come out of the drive tube
when you pull off the cap. Push it back
into the drive tube as far as stop.
Approved KombiEngines
1)
only with paper air filter
Approved Cutting
Attachments
9924BA007 KN
1
Assembling the Unit
9924BA008 KN
002BA248 KN
FBD-KM
English
10
Mounting the Gearbox
N Loosen the clamp screw (1) on the
gearbox (2) – do not remove it.
N Push the drive tube (3) into the
gearbox, turning it back and forth at
the same time.
N Once the end of the drive tube is
inserted beyond the slot in the
clamp (4), push it fully home as far
as stop.
N Tighten down the clamp screw
moderately.
N Line up the drive tube (3) in the
gearbox (2) so that the lug (arrow)
on the drive tube points vertically
upwards when the depth wheel (5)
is upright.
N Tighten down the clamp screw
firmly.
N Push the lug (1) on the drive tube
into the slot (2) in the coupling
sleeve as far as stop.
When correctly installed, the red line (3)
(arrow point) must be flush with the end
of the coupling sleeve.
N Tighten down the star knob (4)
firmly.
Removing the KombiTool
N Reverse the above sequence to
remove the drive tube.
1
9924BA009 KN
2
4
9924BA010 KN
9924BA011 KN
3
5
2
Mounting the KombiTool
1
002BA326 KN
2
3
002BA327 KN
4
FBD-KM
English
11
Starting the engine
To start the engine, basically follow the
instructions for use for the KombiEngine
or basic power tool!
N Place the machine on the ground in
a secure position
The blade must not touch the ground or
any other objects – risk of accident!
N Assume a firm stance – possibilities:
standing, bending or kneeling
N Press the machine firmly against
the ground with the left hand – do
not touch the control elements on
the control handle while doing so –
see instruction manual for the
KombiEngine or basic power tool
NOTICE
Do not stand or kneel on the shaft!
WARNING
If the engine is started, the blade may
rotate as soon as the engine is running –
therefore blip the throttle trigger as soon
as the engine is running – the engine
begins to idle.
The other starting procedure is
described in the instruction manual for
the KombiEngine or basic power tool.
Switching off the engine
N see instruction manual for the
KombiEngine or basic power tool
For periods of 3 months or longer
N Remove, clean and inspect the
cutting blade.
N If the KombiTool is removed from
the KombiEngine and stored
separately: Fit the protective cap on
the drive tube to avoid dirt getting
into the coupling.
N Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
Starting / Stopping the
Engine
9926BA009 KN
9926BA010 KN
Storing the Machine
FBD-KM
English
12
Have a worn depth wheel replaced by a
servicing dealer. STIHL recommends
that you have servicing and repair work
carried out exclusively by an authorized
STIHL servicing dealer.
N The end of the thread on the
screw (1) is peened over to ensure
that the wingnut (2) does not work
loose and be lost.
A very high torque has to be applied to
remove the wingnut from the screw. If
the parts are then reassembled, the
captive function is no longer
guaranteed. In such a case have the
screw and wingnut replaced by a
servicing dealer.
Removing the skirt
N Take out the screws (1).
N Remove the strap (2) and skirt (3).
Fitting the skirt
N Place the skirt (3) in position – it
must be flush with the end of the
deflector.
N Fit the strap (2), insert the
screws (1) and tighten them down
firmly.
STIHL recommends the use of only
genuine STIHL blades – see "Special
accessories".
WARNING
A worn, bent or cracked blade (1) must
not be straightened or welded – it may
break completely! – always install a new
blade.
WARNING
Do not resharpen the blade!
Check for signs of wear
To determine the existing wear, check
the corner (arrow) of the blade and along
the edge of the cutter blades.
Replacing the Depth Wheel
1
9924BA015 KN
2
Replacing the Skirt
3
9924BA017 KN
2
1
9924BA018 KN
3
2
1
Replacing the Cutting Blade
1
9924BA026 KN
FBD-KM
English
13
Checking Out-of-Balance
To avoid out-of-balance blades:
N Have your dealer check the blade
for out-of-balance on a STIHL
balancer (special accessory) –
STIHL recommends an authorized
STIHL servicing dealer. If blade is
out-of-balance, always install a new
one
Preparations
N Place the flower bed edger so that
the blade mounting (1) faces
upwards
Removing the Blade
N Insert the stop pin (2) – see "Special
accessories" – as far as it will go into
the hole (3) – shaft is blocked.
N Fit the Allen wrench (5) on the
screw (6)
N Loosen screw clockwise (left-hand
thread) and remove it
N Remove thrust washer (7).
N Remove blade (8) and replace.
Installing the Blade
N Position the blade (8) on the thrust
plate (4)
WARNING
The collar (arrow) of the thrust plate
must engage the hole in the blade.
N Place thrust washer (7) onto the
shaft (9) with the arched side facing
upwards and block the shaft.
N Screw the screw (6)
counterclockwise (left-hand thread)
onto the shaft and tighten it.
A new blade
B blade partially worn – blade can
still be used
C blade worn – replace blade
9924BA025 KN
A B C
1
9924BA029 KN
8
7
2
3
4
6
9924BA013 KN
5
8
9
9924BA014 KN
4
7
6
FBD-KM
English
14
Checking the wear guard
N Check the wear guard (1) for
damage before starting the power
tool.
N The wear guard must be replaced
as soon as the gearbox (2) (arrow)
becomes visible.
NOTICE
The gearbox may be seriously damaged
if you do not replace the wear guard in
good time.
Replacing the wear guard
N Remove the cutting blade if
necessary – see "Replacing the
Cutting Blade".
N Remove screws (3) with a standard
T 20 Torx screwdriver.
N Fit the new wear guard (1).
N Insert the screws and tighten them
down firmly.
N Mount the cutting blade – see
"Replacing the Cutting Blade".
Checking and Replacing the
Wear Guard
1
9924BA016 KN
2
3
9924BA020 KN
3
FBD-KM
English
15
Maintenance and Care
The following intervals apply to normal operating conditions only. If your daily work
-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
before starting work
after finishing work or daily
after each refueling stop
weekly
monthly
every 12 months
if problem
if damaged
if required
Accessible screws and nuts (not wingnut
for depth wheel)
Retighten XX
Wheel
Visual inspection X
Replace X
Wingnut (on wheel) Check tightness X
Mud flap
Visual inspection X
Replace X
Blade
Visual inspection X
Replace XX
Check tightness X
Wear guard
Check X
Replace XX
Safety labels Replace X
FBD-KM
English
16
1 Cutting Blade
2 Deflector
3 Drive Tube
4 Depth Wheel
5 Wingnut
6 Gearbox
7 Wear Guard
8 Skirt
Main Parts
5
9924BA021 KN
1
2
3
4
6
FBD-KM
English
17
Definitions
1 Cutting Blade
Metal cutting blade for redefining
bed edges.
2 Deflector
Designed to reduce the risk of injury
from foreign objects flung
backwards toward the operator by
the cutting attachment and from
contact with the cutting attachment.
3 Drive Tube
Encloses and protects the drive
shaft between the coupling sleeve
and gearbox.
4 Depth Wheel
Deflector-mounted depth wheel
rolls on ground and keeps cutting
blade at preset height for redefining.
5 Wingnut
Must be loosened to adjust the
wheel.
6 Gearbox
Reduces engine speed to speed
required to drive the cutting blade.
7 Wear Guard
Protects the gearbox from wear.
8Skirt
Designed to reduce the risk of injury
from foreign objects flung back
towards the operator by the cutting
blade.
Weight
Users of this machine may only carry out
the maintenance and service work
described in this user manual. All other
repairs must be carried out by a
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
When repairing the machine, only use
replacement parts which have been
approved by STIHL for this power tool or
are technically identical. Only use high-
quality replacement parts in order to
avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of original
STIHL replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and the STIHL parts symbol K
(the symbol may appear alone on small
parts).
Specifications
with deflector and
blade: 3.5 kg
Maintenance and Repairs
FBD-KM
English
18
Observe all country-specific waste
disposal rules and regulations.
STIHL products must not be thrown in
the garbage can. Take the product,
accessories and packaging to an
approved disposal site for environment-
friendly recycling.
Contact your STIHL servicing dealer for
the latest information on waste disposal.
Disposal
000BA073 KN
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
dans d''autres langues
- English: STIHL FBD-KM User manual
Documents connexes
-
STIHL FSB-KM Manuel utilisateur
-
-
STIHL FH-KM Manuel utilisateur
-
-
-
-
STIHL BG-KM Manuel utilisateur
-
-
-
STIHL RL-MM Manuel utilisateur