Electrolux EJF3642AOX Le manuel du propriétaire

EJF3642AOX

No frost Freezer-Fridge

............................................... .......................................

EN Instruction booklet 1

FR

Froid ventile

Réfrigérateur - Congélateur

Guide d’utilisation 14

ES No frost Congelador - Frigoríco Manual de Instrucciones 28

PT No frost Congelador - Frigoríco Manual de Instruções 41

GR No frost (ΧΩΡΙΣ ΠΑΓΟ) Ψυγείο Οδηγίες Χρήσης 53

EN - 1 -

Index

BEFORE USING THE APPLIANCE ........................................................................2

Special Instructions ...................................................................................................... 2

Recommendations....................................................................................................... 3

Installation and Switching On The Appliance .............................................................. 4

Before Switching On ..................................................................................................... 4

THE VARIOUS FUNCTION AND POSSIBILITIES..................................................5

Thermostat Setting ....................................................................................................... 5

ACCESSORIES.......................................................................................................6

Ice tray ........................................................................................................................... 6

ARRANGING FOOD IN THE APPLIANCE..............................................................6

Refrigerator Compartment ........................................................................................... 6

Freezer Compartment .................................................................................................. 7

CLEANING AND MAINTENANCE ...........................................................................8

Defrosting .................................................................................................................... 8

Replacing The Light Bulb ............................................................................................. 9

TRANSPORTATION AND CHANGING OF INSTALLATION POSITION ................ 9

Transportation and Changing of Installation Position ................................................ 9

Changing of Door Opening Direction .......................................................................... 9

BEFORE CALLING YOUR AFTER SALES SERVICE .......................................... 10

THE PARTS OF THE APPLIANCE AND THE COMPARTMENTS ........................ 12

Tips For Saving Energy .............................................................................................. 13

EN - 2 -

PART- 1. BEFORE USING THE APPLIANCE

Special Instructions

• If the model contains R600a-see name plate under refrigerant (the coolant isobutane),

naturals gas that, is very environmentally friendly but also combustible. When

transporting and installing the unit care must be taken to ensure that none of the

refrigeration circuit components become damaged. In the event of damage avoid

naked flames or ignition sources and ventilate the room in which the unit is placed

for a few minutes.

Warning: Keep ventilation openings in appliance enclosure or in structure for building

in, clear of obstruction.

• Do not use mechanical devices or other artificial means to accelerate the defrosting

process.

• Do not use electrical appliances in the refrigerator or freezer compartment of the

appliance.

• If this appliance is to replace an old refrigerator with a lock; break or remove the lock

as a safety measure before storing it, to protect children while playing might lock

themselves inside.

• Old refrigerators and freezers contain insulation gases and refrigerant, which must

be disposed of properly. Entrust the disposal of a scrap unit categorically to

competence of your local waste disposal service and contact your local authority or

your dealer if you have any questions. Please ensure that the pipe of work of your

refrigerating unit does not get damaged prior to being picked-up by the relevant waste

disposal service.

Important note:

Please read this booklet before installing and switching on this appliance. The

manufacturer assumes no responsibility for incorrect installation and usage as described

in this booklet.

EN - 3 -

Recommendations

Warning: Do not use mechanical devices or other means to accelerate the defrosting

process, other than those recommended by the manufacturer. Do not use electrical

appliances inside the food storage compartments of the appliance, unless they are of

the type recommended by the manufacturer. Keep ventilation openings, in the appliance

enclosure or in the built-in structure, clear of obstruction. Do not damage the refrigerant

circuit.

• Do not use adopters or shunts which could cause overheating or burning.

• Do not plug old, warped power supply cables.

• Do not twist and bend the cables.

• Do not allow children to play with the appliance. Children must

NEVER sit on drawers/shelves or hang from the door.

• Do not plug the power supply with wet hands.

• Do not place containers (glass bottles or tin containers) of liquids

into the freezer especially gassy liquids as they could cause

the container to burst during freezing.

• Bottles, which contain a high percentage of alcohol must be

sealed well and placed vertically in the refrigerator.

• Do not touch the cooling surfaces, especially with wet hands as

you could be burnt or hurt.

• Do not eat ice, which have just been removed from the freezer.

• If the supply cord is damaged it must be replaced by the

manufacturer or service agent or appointed qualified person.

• The appliance is not intended for use by people (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by

a person responsible for their safety. Children should be supervised to ensure that

they don’t play with the appliance.

• If the supply cord is damaged it must be replaced by the manufacturer or service

agent or similary qualified people in order to avoid a hazard.

EN - 4 -

Installation and Switching On The Appliance

• This appliance is connecting to 220-240V and 50 Hz.

• You can offer help from the service to install and switching on the appliance.

• Before making the connection to the power supply, ensure that the voltage on the

nameplate corresponds to the voltage of electrical system in your home.

• If the socket does not match the refrigerator plug, replace the plug with a suitable

one (at least 16 A)

• Insert the plug into a socket with an efficient ground connection. If the socket has no

ground contact, we suggest you call an electrician for assistance.

• Manufacturer is not responsible for failure to complete the

ground connection as described in this booklet.

• Do not place the appliance in direct sunlight.

• Do not use in open air and shall not be exposed to the rain.

• Place the refrigerator far from heat sources and in a

well-ventilated position. The refrigerator should be at least 50

cm from radiators, gas or coal stoves and 5 cm far from electrical

stoves.

• Keep the top free for at least 15 cm.

• Do not place heavy and lots of things on the appliance.

• If the appliance is installed next to another refrigerator or freezer,

observe a minimum distance of 2 cm to prevent condensation.

• The appliance must be stand firmly and level on the floor Use

the two front levelling-feet to compensate for an even floor.

• In order to have air circulation under the appliance, the space

under the appliance must be open. Don’t close it with carpet,

etc.

• The outside of the appliance and the accessories inside should

be cleaned with a solution of water and liquid soap; the inside

of the appliance with sodium bicarbonate dissolved in lukewarm

water. After drying replace all the accessories.

Before Switching On

• Wait after 3 hours before plugging the appliance in to the main power

to ensure proper performance.

• There can be an odour when you first switch on the appliance. It will

disappear after the appliance starts to cool.

EN - 5 -

PART- 2.

THE VARIOUS FUNCTION AND POSSIBILITIES

Thermostat Setting

FREEZER THERMOSTAT

REFRIGERATOR THERMOSTAT

CLIMATE

WINTER

SPRING / AUTUMN

SUMMER

10

o

C< T

amb

<16

o

C

16

o

C< T

amb

<25

o

C

25

o

C< T

amb

<43

o

C

Remarks

Freezer

Thermostat

Cooler

Thernostat

Ambient

temperateure

Set to appropriate position

between1and2.

Positions 2.5 and 3 would

be enough according to

your refrigerator model.

Set to appropriate position

between2and3.

Positions 2.5 and 3 would

be enough according to

your refrigerator model.

Set to appropriate position

between3and6.

Positions 2.5 and 3 would

be enough according to

your refrigerator model.

If your refrigerator is in an

extremely cold place with

an ambient temperature of

10

o

C, and if you think the

cooler compartement is

cold with cooler thermostat

set to minimum, you can

set freezer thermostat to

lower positions.

With ambient temperatures

over 38

o

C, if your cooler

compartement is not cool

enough as you want, you

can set freezer thermostat

to higher positions.

Default positions values of your refrigerator are 2.5-3 for freezer compartement

thermostat, and 3 for cooler compartment thermostat.

We advise you not to change your freezer thermostat positions except above

mentioned conditions. Your cooler thermostat can be set according to the ambient

temperature as mentioned above.

The values mentioned in the table are recommended thermostat positions. These

values can change according to usage conditions.

Freezer and refrigerator thermostat automatically

regulates the inside temperature of the compartments.

By rotating the freezer thermostat knob from position

1 to 4 and refrigerator thermostat knob from MIN to MAX,

colder temperatures can be obtain. In cold seasons,

you can set lower positions in order to decrease the

energy consumption.

Note that; freezer and refrigerator temperatures affect each other. For example; when the

refrigerator thermostat is at maximum, for obtaining lower temperatures in refrigerator

compartment, set the freezer thermostat to a higher value. When the freezer thermostat

is at its maximum, for obtaining lower temperatures in freezer compartment, set the

refrigerator thermostat to a lower value.

MIN

MAX

1

2

3

4

5

6

EN - 6 -

PART- 4.

ARRANGING FOOD IN THE APPLIANCE

Refrigerator Compartment

• To set the refrigerator compartment to 2-3 graphic bar will be enough for normal

conditions.

• To reduce humidity and consequent increase of frost never place liquids in unsealed

containers in the refrigerator.

• Never place warm food in the refrigerator. Warm food should be allowed to cool at

room temperature and should be arranged to ensure adequate air circulation in the

refrigerator compartment.

• Arrange the meat and cleaned fish (wrapped in packages or sheets of plastic) which

you will use in 1-2 days.

• You can put the fruits and vegetables into crisper without packing.

Note that; the ambient temperature, temperature of the freshly stored food and how often

the door is opened, affects the temperature in the refrigerator and freezer compartment. If

required, change the temperature setting.

• In order to prevent sweating and accumulation of bacteria inside the refrigerator

compartmen, it is recommended not to set the refrigerator thermostat to MIN position

even there is no storage of food inside.

• When you first switch on the appliance, for starting a suitable cooling, the appliance

should work 24 hours continuously until it cools down to sufficient temperature.

• In this time do not open the door so often and do not place a lot of food inside the

appliance.

• If the unit is switched off or unplugged, you must allow at least 5 minutes before

restarting or re-plugging the unit in order not to damage the compressor.

PART- 3.

ACCESSORIES

Ice tray

• Fill the ice tray with water and place in freezer compartment.

• After the water completely turned into ice, you can twist the tray as shown below to

get the ice cube.

• It is suggested to freeze fresh foods at the upper shelf and far from the thermostat.

EN - 7 -

Freezer Compartment

• To set the freezer compartment to 2-3 graphic bar will be enough for normal conditions.

• The use of freezer is, storing of deep-frozen or frozen foods for long periods of time

and making ice cubes.

• Do not put fresh and warm foods to the freezer door shelves to be frozen. Only use

for storage of frozen foods.

• Do not put fresh and warm food with frozen food side by side as it can thaw the frozen

food.

• Use the fast freezing shelf to freeze home cooking (and the foods which is wanted to

freeze) more quickly because of the freezing room’s greater freezing power.

• While freezing fresh foods (i.e. meat, fish and mincemeat) divide them in parts you

will use in one time.

• While freezing fresh foods ; Maximum amount of fresh food (in kg) that can be frozen

in 24 hours is indicated on the appliance label.

• It is suggested to freeze fresh foods at the upper shelf and far from the thermostat.

• For storing the frozen foods; the instructions shown on frozen food packages should

always be followed carefully and if no information is provided food should not be

stored for more than 3 months from the purchased date.

• When buying frozen foods ensure that these have been frozen at suitable

temperatures and that the packing is intact.

• Frozen foods should be transported in appopriate containers to maintain the quality

of the food and should be returned to the freezing surfaces of the unit in the shortest

possible time.

• If a package of frozen food shows the sign of humidity and abnormal swelling it is

probable that it has been previously stored at an unsuitable temperature and that

the contents have deteriorated.

• The storage life of frozen foods depends on the room temperature, thermostat

setting, how often the door is opened, the type of food and the length of time required

to transport the product from the shop to your home. Always follow the instructions

printed on the package and never exceed the maximum storage life indicated.

EN - 8 -

PART- 5.

CLEANING AND MAINTENANCE

• Disconnect unit from the power supply before cleaning.

• Do not clean the appliance by pouring water.

• The refrigerator and freezer compartment should be

cleaned periodically using a solution of bicarbonate of

soda and lukewarm water

• Clean the accessories separately with soap and water.

Do not clean them in the washing machine.

• Do not use abrasive products, detergents or soaps. After

washing, rinse with clean water and dry carefully. When

the cleaning operations have been completed reconnect

the plug of the unit with dry hands.

• You should clean the condenser with

broom at least once a year in order to

provide energy saving and increase the

productivity.

THE POWER SUPPLY MUST BE DISCONNECTED.

Defrosting

• Defrosting occurs fully automatically during

operation; the defrost water is collected by the

evaporating tray and evaporates automatically.

EN - 9 -

Replacing The Light Bulb

1. Unplug the unit from the power supply,

2. Remove the refrigerator light cover with a

minus screw driver, and take out the cover.

(A)

3. Change the present light bulb with a new

oneofnotmorethan15W.(B)

4. Replace the light cover (C) and after waiting

5 minutes plug the unit.

PART- 6.

TRANSPORTATION AND CHANGING OF

INSTALLATION POSITION

Transportation and Changing of Installation Position

• The original packages and foamed polystyrene (PS) can be concealed if required.

• In transportation the appliance should be tied with a wide stripe or a strong rope.

The rules written on the corrugated box must be applied while transporting.

• Before transporting or changing old installation position, all the moving objects (i.e.,

shelves, crisper…) should be taken out or fixed with bands in order to prevent the

shake.

Changing of Door Opening Direction

In case you need to change door-opening direction, please consult the domestic after

sales service.

(For some models)

EN - 10 -

PART- 7.

BEFORE CALLING YOUR AFTER SALES SERVICE

If your refrigerator is not working properly, it may be a minor problem, therefore check the

following, before calling an electrician to save time and money.

What to do if your refrigerator does not operate;

Check that;

• There is no power ,

• The general switch in your home is disconnected ,

• The thermostat setting is on «1 / MIN» position ,

• The socket is not sufficient. To check this, plug in another appliance that you know

which is working into the same socket.

What to do if your refrigerator performs poorly;

Check that;

• You have not overloaded the appliance ,

• The doors are closed perfectly ,

• There is no dust on the condenser ,

• There is enough place at the rear and side walls.

If there is noise;

The cooling gas which circulates in the refrigerator circuit may make a slight noise

(bubbling sound) even when the compressor is not running. Do not worry this is quite

normal. If these sounds are different check that;

• The appliance is well levelled

• Nothing is touching the rear.

• The stuffs on the appliance are vibrating.

If your fridge is not cooling enough;

Your fridge is designed to operate in the ambient temperature intervals stated in the

standards, according to the climate class stated in the information label. We do not

recommend operating your fridge out of stated temperatures value limits in terms of cooling

effectiveness.

Climate Class Ambient Temperature (°C)

T Between 16 and 43 (°C)

ST Between 16 and 38 (°C)

N Between 16 and 32 (°C)

SN Between 10 and 32 (°C)

EN - 11 -

• Tropical Climate Class is described as between 16°C and 43°C of ambient

temperatures according to EN ISO15502 standards.

• Appliance complies with EN15502, IEC60335-1 / IEC60335-2-24, 2004/108/EC

standards.

Recommendations

• If the appliance is not used for long time (for example during the summer holidays)

unplug and clean the refrigerator leaving the door open to prevent the formation of

mildew and smell.

• To stop the appliance completely, unplug from main socket (for cleaning and when

the doors are left open)

EN - 12 -

A

B

1

2

3

4

5

6

7

8

9

10

11

12

13

A) FREEZER COMPARMENT

B) REFRIGERATOR COMPARTMENT

1) FREEZER TERMOSTAT BOX

2) ICE TRAY

3) FREEZER SHELF

4) REFRIGERATOR THERMOSTAT BOX

5)REFRIGERATOR SHELVES

6) REFRIGERATOR LAMP BOX/COVER

7) CRISPER COVER

8) CRISPER

9) LEVELING FEET

10) EGG HOLDER

11) TOP SHELF

12) BOTTLE SHELF

13) BOTTOM SHELF

This presentation is only for information about the parts of the appliance.

Parts may vary according to the appliance model.

PART- 8.

THE PARTS OF THE APPLIANCE AND THE

COMPARTMENTS

EN - 13 -

Tips For Saving Energy

1– Install the appliance in a coll, well vantilated room , but not in direct sunlight and

not near heat source (radiator, cooker.. etc). Otherwise use an insulating plate.

2– Allow ward food and drinks to cool down outside the appliance.

3– When thawing frozen food, place it in the refrigerator compartment. The low

temperature of the frozen food will help to cool the refrigerator compartment

when it is thawing. So it causes energy saving. If the frozen food is put out, it

causes wastage of energy.

4– When placing, drinks and slops they must be covered. Otherwise humidity

increases at the appliance. Therefore the working time gets longer. Also

covering drinks and slops helps to save smell and taste.

5– When placing food and drinks, open the appliance door as briefly as possible.

6– Keep close the covers of any different temrepature compartment in the appliance

(crisper, chiller ...etc ).

7– Door gasket must be clean and pliable. Replace gaskets if worn.

8– Occasionally clean the rear of the appliance with a vacuum cleaner or paint

brush to prevent an increased power comsumption.

The symbol on the product or on its packaging

indicates that this product may not be treated as household

waste. Instead it shall be handed over to the applicable

collection point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of

correctly, you will help prevent potential negative

consequences for the environment and human health, which

could otherwise be caused by inappropriate waste handling

of this product. For more detailed information about

recycling of this product, please contact your local city

office, your household waste disposal service or the shop

where you purchased the product.

FR - 14 -

Sommaire

AVANT D’UTILISER CET APPAREIL ....................................................................15

Instructions de sécurité .............................................................................................. 15

Recommandations ..................................................................................................... 16

Installation et branchement de l’appareil ................................................................... 17

Avant de brancher l’appareil ....................................................................................... 17

FONCTIONS DIVERSES .......................................................................................18

Réglage du thermostat ............................................................................................... 18

Accessoires ................................................................................................................ 19

Bac à glaçons : ....................................................................................................................19

Afficheur de température ............................................................................................. 20

RANGEMENT DES ALIMENTS .............................................................................21

Compartiment réfrigérateur ........................................................................................ 21

Compartiment congélateur ......................................................................................... 21

NETTOYAGE ET ENTRETIEN ...............................................................................22

Dégivrage .................................................................................................................... 22

Remplacement de l’ampoule ..................................................................................... 23

TRANSPORT ET DEPLACEMENT ........................................................................23

Changement du sens d’ouverture de la porte ............................................................ 23

AVANT D’APPELER LE SERVICE APRES-VENTE...............................................24

ELEMENTS ET COMPARTIMENTS DE L’APPAREIL ........................................... 26

Quelques conseils pour économiser de l'énergie ..................................................... 27

FR - 15 -

SECTION 1.

AVANT D’UTILISER CET APPAREIL

Instructions de sécurité

• Si le modèle contient le R600a, voir plaque signalétique qui se trouve sous le

réfrigérant (l’isobutane du dispositif de refroidissement), un gaz naturel très

écologique mais aussi combustible. Vous devez être prudent lors du transport et de

l’installation du dispositif pour vous assurer qu’aucun des composants du circuit

de refroidissement n’est endommagé. En cas de dommage, évitez les flammes

nues ou les sources d’allumage, ventilez la chambre dans laquelle le dispositif se

trouve pendant quelques minutes.

Avertissement: Ne bloquez pas les ouvertures situées dans l’appareil ou dans la

structure.

• N’utilisez pas des instruments mécaniques ou autres voies artificielles pour accélérer

le processus de dégivrage.

• N’utilisez pas des appareils électriques dans le réfrigérateur ou dans le compartiment

congélateur de l’appareil.

• Si cet appareil sert à remplacer un vieux réfrigérateur comportant un cadenas, cassez

ou retirez le cadenas, mesure de sécurité, avant de le garder pour éviter que les

enfants ne s’y enferment pendant leurs jeux.

• Les vieux réfrigérateurs et congélateurs contiennent des gaz isolants et réfrigérants

qui doivent être éliminés convenablement. Assignez entièrement la mise au rebus

des appareils au service d’élimination d’ordures de votre localité et contactez

l’autorité locale ou votre fournisseur en cas de questions. Veuillez vous assurer

que le tuyau d’alimentation de votre unité frigorifique n’est pas endommagé avant

que le service d’élimination de déchet ne le récupère.

Remarque importante:

Lisez attentivement ce livret avant d’installer et de mettre en marche l’appareil. Le fabricant

n’assume aucune responsabilité quant à une mauvaise installation et utilisation tel que

le livret le décrit.

FR - 16 -

Recommandations

Avertissement : N’utilisez pas d’appareils mécaniques ou d’autres moyens artificiels

pour accélérer le processus de décongélation. N’utilisez pas d’appareils électriques dans

l’espace de stockage des aliments de l’appareil. N’obstruez pas les ouvertures de

ventilation de l’appareil. N’endommagez pas le circuit de liquide réfrigérant du

réfrigérateur.

• N’utilisez pas d’adaptateurs électrique ni de dérivations qui

risqueraient de provoquer une surchauffe ou un embrasement.

• N’utilisez pas de câbles d’alimentation électrique vieux et

endommagés.

• Ne tordez pas et ne pliez pas le câble électrique.

• Interdisez aux enfants de jouer avec cet appareil. Ils ne doivent en

aucun cas s’asseoir sur les compartiments ou les étagères, ni se

suspendreàlaporte.

• Ne branchez pas la prise électrique avec des mains mouillées.

• Ne placez pas de récipients contenant des liquides (bouteilles en

verre ou canettes) dans le congélateur, tout particulièrement

lorsqu’il s’agit de boissons gazeuses. Ils risqueraient d’exploser

pendant la congélation.

• Les bouteilles d’alcool doivent être parfaitement rebouchées et

placées verticalement dans le réfrigérateur.

• Ne touchez pas les surfaces de refroidissement, tout

particulièrement si vos mains sont mouillées, car vous risqueriez

de vous brûler ou de vous blesser.

• Ne mangez pas de la glace qui vient juste de sortir du congélateur.

• Cet appareil n’est pas destiné à être utilisé par des personnes (enfants inclus) dont

les capacités physiques, sensorielles ou intellectuelles sont réduites ou bien

manquant d’expérience et de connaissances à moins d’avoir été encadrées ou

formées au niveau de l’utilisation de l’appareil par une personne responsable de

leur sécurité. Surveillez les enfants pour s’assurer qu’ils ne jouent pas avec

l’appareil.

• Si le cordon d’alimentation est endommagé, il doit être remplacé par le fabriquant

ou par un agent de maintenance ou une personne dûment qualifiée.

FR - 17 -

Installation et branchement de l’appareil

• Cet appareil fonctionne sur courant alternatif 220-240V, 50 Hz.

• Avant d’effectuer le raccordement électrique, assurez-vous que le voltage indiqué

sur la plaque signalétique correspond au voltage de l’installation électrique de votre

habitation.

• Si la prise de courant et la prise du réfrigérateur ne sont pas compatibles, remplacez

cette dernière par une prise adéquate (au moins 16 A).

• L’appareil doit être relié à la terre. Si vous ne disposez pas de prise de terre, nous

vous conseillons de contacter un électricien.

• Le fabricant décline toute responsabilité en cas de non-

raccordement à la terre conformément aux recommandations

de cette brochure.

• N’exposez pas l’appareil aux rayons directs du soleil.

• Cet appareil ne doit pas être utilisé en plein air, ni exposé à la

pluie.

• Placez le réfrigérateur loin des sources de chaleur, dans un

endroit bien ventilé. Il doit se trouver au moins à 50 cm des

radiateurs, fours à gaz ou à charbon et à 5 cm des fours

électriques.

• Prévoyez un espace libre d’au moins 15 cm au-dessus de

l’appareil.

• Evitez de placer des objets lourds ou un grand nombre d’objets

sur l’appareil.

• Si l’appareil est installé à côté d’un autre réfrigérateur ou

congélateur, observez une distance minimale de 2 cm pour

éviter la condensation.

• La base de l’appareil doit être stable et horizontale. Utilisez les

pieds réglables situés à l’avant de l’appareil pour compenser

les irrégularités du sol.

• L’espace situé en dessous de l’appareil doit rester libre pour

assurer la circulation de l’air. Ne le bouchez pas avec un tapis,

etc.

• L’extérieur de l’appareil et les accessoires intérieurs doivent être nettoyés avec une

solution d’eau et de savon liquide. L’intérieur doit être nettoyé avec du bicarbonate

de soude dissous dans de l’eau tiède. Séchez avec soin et remettez les accessoires

en place.

Avant de brancher l’appareil

• Attendez 3 heures avant de brancher l’appareil, afin de garantir des

performances optimales.

• Votre appareil neuf peut avoir une odeur particulière. Celle-ci

disparaîtra une fois qu’il commencera à se refroidir.

FR - 18 -

SECTION 2.

FONCTIONS DIVERSES

Réglage du thermostat

THERMOSTAT DU CONGELATEUR THERMOSTAT DU REFRIGERATEUR

Les thermostats du congélateur et du réfrigérateur

régulent automatiquement la température interne des

compartiments. En tournant le bouton du thermostat

du congélateur de la position 1 à 4 et le bouton du

thermostat du réfrigérateur de la position MIN à MAX,

vous obtiendrez des températures plus froides. Lors

des saisons froides, vous pouvez régler le thermostat

sur des positions plus faibles afin d’économiser de

l’énergie.

Remarque : les températures du congélateur et du réfrigérateur influent l’une sur l’autre.

Par exemple, si le thermostat du réfrigérateur est au maximum, augmentez le

thermostat du congélateur afin que le compartiment réfrigérateur soit plus froid.

SAISON

HIVER

PRINTEMPS/AUTOMNE

ÉTÉ

10

o

C< T

amb

<16

o

C

16

o

C< T

amb

<25

o

C

25

o

C< T

amb

<43

o

C

Remarques

Thermostat

de

congélation

Thermostat de

refroidissement

Température

ambiante

Placez sur la position

correcte entre 1 et 2.

Les positions 2.5 et 3

seront suffisantes selon le

modèle du réfrigérateur.

Si votre réfrigérateur est situé

dans un local très froid avec

une température ambiante de

10ºC, et si le compartiment de

refroidissement est froid avec

le thermostat de

refroidissement au minimum,

vous pouvez régler le

thermostat de congélation au

minimum.

Avec des températures

ambiantes supérieures à

38ºC, si le compartiment de

refroidissement n’est pas

suffisamment froid, vous

pouvez régler le thermo-

stat de congélation au

maximum.

Les valeurs par défaut de votre réfrigérateur sont 2,5-3 pour le thermostat du compartiment

de congélation, et 3 pour le thermostat du compartiment de refroidissement.

Il est recommandé de ne pas changer les positions du thermostat de congélation sauf dans les

conditions visées ci-dessus. Le thermostat de refroidissement peut être réglé selon la température

ambiante comme décrit ci-dessus.

DLes valeurs indiquées dans le tableau sont les positions recommandées du thermostat. Ces

valeurs peuvent varier selon les conditions d’utilisation.

Placez sur la position

correcte entre 2 et 3.

Placez sur la position

correcte entre 3 et 6.

Les positions 2.5 et 3

seront suffisantes selon le

modèle du réfrigérateur.

Les positions 2.5 et 3

seront suffisantes selon le

modèle du réfrigérateur.

Commande de la température du congélateur et du réfrigérateur :

MIN

MAX

1

2

3

4

5

6

La page charge ...

Electrolux EJF3642AOX Le manuel du propriétaire

Electrolux EJF3642AOX Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents